@??? ? ?8???7????????????K 7z????????????????~?...... [130]HELLO! BOOT0 is starting! [133]BOOT0 commit : {da907073} [136]set pll start [138]set pll end [140]board init ok [142]spinor id is: c2 20 19, read cmd: 03 [147]ZQ value = 0x707 [149]get_pmu_exist() = -1 [152]DRAM BOOT DRIVE INFO: V1.12 [155]DRAM CLK = 936 MHz [157]DRAM Type = 3 (2:DDR2,3:DDR3) [160]DRAMC ZQ value: 0x3b3bfb [163]DRAM ODT value: 0x40. [166]trefi: 7.8us [168]DRAM SIZE = 256 M [171]DRAM simple test OK. [174]dram size = 256 [177]set spi freq:100000000 [181]spi sample_mode:1 sample_delay:19 [185]spinor id is: c2 20 19, read cmd: 6c [189]Succeed in reading toc file head. [192]The size of toc is e8000. [217]Entry_name = opensbi [220]Entry_name = u-boot [223]Jump to OpenSBI: opensbi_base = 0x43e00000, dtb_base = 0x43e2f000, uboot_base = 0x42000000 OpenSBI v1.4 Commit 227d57d Build time: 2025-02-27 21:00:03 +0800 Build compiler: gcc version 10.4.0 (Xuantie-900 linux-6.6.0 glibc gcc Toolchain V2.10.1 B-20240712) ____ _____ ____ _____ / __ \ / ____| _ \_ _| | | | |_ __ ___ _ __ | (___ | |_) || | | | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |__| | |_) | __/ | | |____) | |_) || |_ \____/| .__/ \___|_| |_|_____/|____/_____| | | |_| Platform Name : sun251iw1 Platform Features : medeleg,thead Platform HART Count : 1 Platform IPI Device : --- Platform Timer Device : aclint-mtimer @ 24000000Hz Platform Console Device : sunxi_uart Platform HSM Device : sun251iw1p1-ppu Platform PMU Device : thead,c900-pmu Platform Reboot Device : sun251iw1p1_reset Platform Shutdown Device : sun251iw1p1_reset Platform Suspend Device : sun251iw1p1-system-suspend Platform CPPC Device : --- Firmware Base : 0x43e00000 Firmware Size : 319 KB Firmware RW Offset : 0x40000 Firmware RW Size : 63 KB Firmware Heap Offset : 0x47000 Firmware Heap Size : 35 KB (total), 2 KB (reserved), 9 KB (used), 23 KB (free) Firmware Scratch Size : 4096 B (total), 320 B (used), 3776 B (free) Runtime SBI Version : 2.0 Domain0 Name : root Domain0 Boot HART : 0 Domain0 HARTs : 0* Domain0 Region00 : 0x0000000014004000-0x0000000014007fff M: (I,R,W) S/U: () Domain0 Region01 : 0x0000000014008000-0x000000001400bfff M: (I,R,W) S/U: () Domain0 Region02 : 0x0000000043e40000-0x0000000043e4ffff M: (R,W) S/U: () Domain0 Region03 : 0x0000000043e00000-0x0000000043e3ffff M: (R,X) S/U: () Domain0 Region04 : 0x0000000010000000-0x0000000013ffffff M: (I,R,W) S/U: (R,W) Domain0 Region05 : 0x0000000000000000-0xffffffffffffffff M: () S/U: (R,W,X) Domain0 Next Address : 0x0000000042000000 Domain0 Next Arg1 : 0x0000000043e2f000 Domain0 Next Mode : S-mode Domain0 SysReset : yes Domain0 SysSuspend : yes Boot HART ID : 0 Boot HART Domain : root Boot HART Priv Version : v1.11 Boot HART Base ISA : rv64imafdcvx Boot HART ISA Extensions : zicntr,zihpm Boot HART PMP Count : 8 Boot HART PMP Granularity : 12 bits Boot HART PMP Address Bits: 38 Boot HART MHPM Info : 12 (0x0003e3f8) Boot HART MIDELEG : 0x0000000000020222 ?oot HART MEDELEG : 0x000000000000b109 U-Boot 2018.07 (Apr 29 2026 - 08:37:32 +0000) Allwinner Technology [00.521]DRAM: 256 MiB [00.523]Relocation Offset is: 0ceda000, reloc addr is: 4eeda000 [00.529]secure enable bit: 0 [00.532]CPU=912 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=468Mhz SPI ALL: ready [00.541]flash init start [00.544]workmode = 0,storage type = 3 [00.550]spi sample_mode:1 sample_delay:19 [00.554]spi sunxi_slave->max_hz:100000000 SF: Detected mx25l25635e( ) with page size 256 Bytes, erase size 64 KiB, total 32 MiB [00.566]sunxi flash init ok [00.569][KSC_ERR]: unable to map tv display top registers ksc_dev_init finsih [00.577]drv_disp_init partno erro : can't find partition bootloader [00.591]bootloader is not found! ** Unable to read file disp_config.ini ** secure storage read disp_flip fail Node hdmi not found Node edp0 not found Node:edp0 not found [00.612]de wrn crc 1c2800 [00.636]drv_disp_init finish [00.639]start_type: 0, start_mode: 0 ir key code:0x40 ir key code:0xf2 ir key code:0x57 ir key code:0xdc ir key code:0xdc ir key code:0x4d ir key code:0x8 ir key code:0x0 ir key code:0x0 ir key code:0xea ir key code:0x14 ir key code:0x1c ir key code:0x1c ir key code:0x1 ...... [17]HELLO! BOOT0 is starting! [20]BOOT0 commit : {da907073} [23]set pll start [24]set pll end [26]board init ok [28]rtc[2] value = 0xf [30]rtc[3] value = 0xf4f43001 [33]spinor id is: c2 20 19, read cmd: 03 [38]ZQ value = 0x707 [40]get_pmu_exist() = -1 [42]DRAM BOOT DRIVE INFO: V1.12 [45]DRAM CLK = 936 MHz [47]DRAM Type = 3 (2:DDR2,3:DDR3) [50]DRAMC ZQ value: 0x3b3bfb [53]DRAM ODT value: 0x40. [56]trefi: 7.8us [58]DRAM SIZE = 256 M [61]DRAM simple test OK. [64]dram size = 256 [67]set spi freq:100000000 [71]spi sample_mode:1 sample_delay:19 [75]spinor id is: c2 20 19, read cmd: 6c [79]Succeed in reading toc file head. [82]The size of toc is e8000. [106]Entry_name = opensbi [110]Entry_name = u-boot [113]Jump to OpenSBI: opensbi_base = 0x43e00000, dtb_base = 0x43e2f000, uboot_base = 0x42000000 OpenSBI v1.4 Commit 227d57d Build time: 2025-02-27 21:00:03 +0800 Build compiler: gcc version 10.4.0 (Xuantie-900 linux-6.6.0 glibc gcc Toolchain V2.10.1 B-20240712) ____ _____ ____ _____ / __ \ / ____| _ \_ _| | | | |_ __ ___ _ __ | (___ | |_) || | | | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |__| | |_) | __/ | | |____) | |_) || |_ \____/| .__/ \___|_| |_|_____/|____/_____| | | |_| Platform Name : sun251iw1 Platform Features : medeleg,thead Platform HART Count : 1 Platform IPI Device : --- Platform Timer Device : aclint-mtimer @ 24000000Hz Platform Console Device : sunxi_uart Platform HSM Device : sun251iw1p1-ppu Platform PMU Device : thead,c900-pmu Platform Reboot Device : sun251iw1p1_reset Platform Shutdown Device : sun251iw1p1_reset Platform Suspend Device : sun251iw1p1-system-suspend Platform CPPC Device : --- Firmware Base : 0x43e00000 Firmware Size : 319 KB Firmware RW Offset : 0x40000 Firmware RW Size : 63 KB Firmware Heap Offset : 0x47000 Firmware Heap Size : 35 KB (total), 2 KB (reserved), 9 KB (used), 23 KB (free) Firmware Scratch Size : 4096 B (total), 320 B (used), 3776 B (free) Runtime SBI Version : 2.0 Domain0 Name : root Domain0 Boot HART : 0 Domain0 HARTs : 0* Domain0 Region00 : 0x0000000014004000-0x0000000014007fff M: (I,R,W) S/U: () Domain0 Region01 : 0x0000000014008000-0x000000001400bfff M: (I,R,W) S/U: () Domain0 Region02 : 0x0000000043e40000-0x0000000043e4ffff M: (R,W) S/U: () Domain0 Region03 : 0x0000000043e00000-0x0000000043e3ffff M: (R,X) S/U: () Domain0 Region04 : 0x0000000010000000-0x0000000013ffffff M: (I,R,W) S/U: (R,W) Domain0 Region05 : 0x0000000000000000-0xffffffffffffffff M: () S/U: (R,W,X) Domain0 Next Address : 0x0000000042000000 Domain0 Next Arg1 : 0x0000000043e2f000 Domain0 Next Mode : S-mode Domain0 SysReset : yes Domain0 SysSuspend : yes Boot HART ID : 0 Boot HART Domain : root Boot HART Priv Version : v1.11 Boot HART Base ISA : rv64imafdcvx Boot HART ISA Extensions : zicntr,zihpm Boot HART PMP Count : 8 Boot HART PMP Granularity : 12 bits Boot HART PMP Address Bits: 38 Boot HART MHPM Info : 12 (0x0003e3f8) Boot HART MIDELEG : 0x0000000000020222 ?oot HART MEDELEG : 0x000000000000b109 U-Boot 2018.07 (Apr 29 2026 - 08:37:32 +0000) Allwinner Technology [00.411]DRAM: 256 MiB [00.413]Relocation Offset is: 0ceda000, reloc addr is: 4eeda000 [00.419]secure enable bit: 0 [00.422]CPU=912 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=468Mhz SPI ALL: ready [00.431]flash init start [00.433]workmode = 0,storage type = 3 [00.440]spi sample_mode:1 sample_delay:19 [00.444]spi sunxi_slave->max_hz:100000000 SF: Detected mx25l25635e( ) with page size 256 Bytes, erase size 64 KiB, total 32 MiB [00.456]sunxi flash init ok [00.459][KSC_ERR]: unable to map tv display top registers ksc_dev_init finsih [00.467]drv_disp_init partno erro : can't find partition bootloader [00.481]bootloader is not found! ** Unable to read file disp_config.ini ** secure storage read disp_flip fail Node hdmi not found Node edp0 not found Node:edp0 not found [00.502]de wrn crc 1c2800 [00.526]drv_disp_init finish [00.529]start_type: 0, start_mode: f [00.535]Loading Environment from SUNXI_FLASH... OK [00.545]boot_gui_init:start ** Unable to read file disp_rsl.fex ** [00.551][KSC_ERR]: Get bw_ctrl_en property failed [00.556]gd->relocaddr = 4efca000 16600 [00.561]property lcd_gamma_18 is not found FDT ERROR:fdt_get_all_pin:get property handle pinctrl-0 error:FDT_ERR_INTERNAL sunxi_pwm_pin_set_state, fdt_set_all_pin, ret=-1 [00.678]LCD open finish bad fb1_cfg[w=-1,h=-1,bpp=32,format=0] [00.744]boot_gui_init:finish partno erro : can't find partition bootloader [00.751]bmp_name=bootlogo.bmp size 38454 secure storage read hdcpkey fail [00.761]secure storage read hdcpkey fail with:-1 [00.765]push hdcp key failed [00.768]usb burn from boot USB2.0 controller init ! delay time 0 [00.780]usb prepare ok [01.083]overtime [01.087]do_burn_from_boot usb : no usb exist [01.091]begin auto update check auto update key not press skip update boot_param partno erro : can't find partition private partno erro : can't find partition private partno erro : can't find partition private [01.111]update part info [01.113]update bootcmd [01.116]change working_fdt 0x4da99d88 to 0x4da79d88 [01.125]## error: update_fdt_dram_para_from_bootpara : FDT_ERR_NOTFOUND partno erro : can't find partition bootloader [01.143]bootloader is not found! ** Unable to read file disp_config.ini ** secure storage read disp_flip fail Node hdmi not found Node edp0 not found Node:edp0 not found [01.169]update dts Hit any key to stop autoboot: 0 [01.263]no vendor_boot partition is found Android's image name: sun251i_riscv64 Detect comp lzma ERROR: reserving fdt memory region failed (addr=4efca000 size=1c2000) ERROR: reserving fdt memory region failed (addr=4f18c000 size=1c2000) ERROR: reserving fdt memory region failed (addr=4f34e000 size=384000) [02.663] Starting kernel ... [ 0.000000] Linux version 6.6.0 (cui@server) (riscv64-unknown-linux-musl-gcc (Xuantie-900 linux-6.6.0 musl gcc Toolchain V2.10.2 B-20240904) 10.4.0, GNU ld (GNU Binutils) 2.35) #274 PREEMPT Thu Apr 30 16:59:20 CST 2026 [ 0.000000] Machine model: sun251iw1 [ 0.000000] SBI specification v2.0 detected [ 0.000000] SBI implementation ID=0x1 Version=0x10004 [ 0.000000] SBI TIME extension detected [ 0.000000] SBI IPI extension detected [ 0.000000] SBI RFENCE extension detected [ 0.000000] SBI SRST extension detected [ 0.000000] printk: bootconsole [earlycon0] enabled [ 0.062191] AW BSP version: UNKNOWN, 2026-04-30 16:58:05 [ 0.790446] function = msa_init = = = = = = = = = LINE = 823. [ 0.971286] function = msa_probe = = = = = = = = = LINE = 547. [ 0.980100] function = msa_probe = = = = = = = = = LINE = 556. [ 1.005182] function = msa_startup = = = = = = = = = LINE = 770. [ 1.012785] msa use sepical device node name = msa mount: mounting none on /dev failed: Resource busy boot-resource@mtdblock1:env@mtdblock2:boot@mtdblock3:rootfs@mtdblock4:Reserve0@mtdblock5:rootfs_data@mtdblock6:UDISK@mtdblock7 starting pid 1206, tty '': '/etc/preinit' can't run '/etc/preinit': No such file or directory starting pid 1207, tty '': '/bin/mount -t proc proc /proc' starting pid 1208, tty '': '/bin/mount -t tmpfs tmpfs /run' mount: mounting tmpfs on /run failed: No such file or directory starting pid 1210, tty '': '/bin/mount -o remount,rw /' starting pid 1211, tty '': '/bin/mkdir -p /dev/pts' starting pid 1212, tty '': '/bin/mkdir -p /dev/shm' starting pid 1213, tty '': '/bin/mount -a' starting pid 1214, tty '': '/bin/hostname -F /etc/hostname' starting pid 1215, tty '': '/etc/init.d/rcS boot' ------run rc.preboot file----- /etc/init.d/rcS: /etc/init.d/rc.preboot: line 34: fsck.fat: not found ------run rc.modules file----- Skipping module loading ------run rc.final file----- /etc/init.d/rcS: /etc/init.d/rc.final: line 21: /etc/init.d/S41netparam: Permission denied amixer: Cannot find the given element from control default host_chose finished, otg disabled! /etc/init.d/rcS: /etc/init.d/rc.final: line 29: nice: not found dbus[1269]: Unknown group "lp" in message bus configuration file /etc/init.d/rcS: /etc/init.d/rc.final: line 87: can't create /sys/class/input/input2/accel_enable: Permission denied starting pid 1284, tty '/dev/console': '-/bin/sh' BusyBox v1.33.2 (2025-12-22 18:10:54 CST) built-in shell (ash) [1970-01-01 00:00:08] get_hardware_id: ic hardware: 781 [1970-01-01 00:00:08] pqdata_init: PQ config data init: code[1921] version[211] ------run profile file----- _____ _ __ _ |_ _||_| ___ _ _ | | |_| ___ _ _ _ _ | | _ | || | | |__ | || || | ||_'_| | | | || | || _ | |_____||_||_|_||___||_,_| |_| |_||_|_||_|_| Tina is Based on OpenWrt! ---------------------------------------------- Tina Linux (5.0, r0-d893a0752) ---------------------------------------------- nodev debugfs root@TinaLinux:/# cs mode : server param adj switch : on amix server created, ctrl c if you want to exit. version:2b738fc1ab88df4cd58b3325fbcc34cc074ea40e platform: name [F123], board [all] hwsfx : base [0xf0], size [0x2bc] dump : dirpath [(null)] play_device[0]: type[OUT_SPK], start_fade[0], setup_gap_time[100] setup_fade_time[100], dump_time[0], effect["ROUTE"SubId(0)Setup(0)"VOLUME"SubId(0)Setup(0)"EQ"SubId(0)Setup(0)"RTC_AGC"SubId(0)Setup(0)"HW_DRC"SubId(0)Setup(0)] play_device[1]: type[OUT_HEADSET], start_fade[0], setup_gap_time[100] setup_fade_time[100], dump_time[0], effect["ROUTE"SubId(0)Setup(0)"VOLUME"SubId(0)Setup(0)"EQ"SubId(0)Setup(0)"RTC_AGC"SubId(0)Setup(0)"HW_DRC"SubId(0)Setup(0)] play_device[2]: type[OUT_A2DP], start_fade[0], setup_gap_time[100] setup_fade_time[100], dump_time[0], effect["VOLUME"SubId(0)Setup(0)"EQ"SubId(0)Setup(0)] play_device[3]: type[OUT_OWA], start_fade[0], setup_gap_time[100] setup_fade_time[100], dump_time[0], effect["VOLUME"SubId(0)Setup(0)"EQ"SubId(0)Setup(0)] play_device[4]: type[OUT_HDMI_ARC], start_fade[0], setup_gap_time[100] setup_fade_time[100], dump_time[0], effect["VOLUME"SubId(0)Setup(0)"EQ"SubId(0)Setup(0)] cedarSE param adjust server created. [1970-01-01 00:00:12] WARNING: awplayer : Set log level to 3 [1970-01-01 00:00:12] ERROR : awplayer : read plugin entry adecoder-14 fail! [1970-01-01 00:00:12] ERROR : awplayer : dlopen 'libaw_amrdec.so' fail: Error loading shared library libaw_amrdec.so: No such file or directory [1970-01-01 00:00:12] ERROR : awplayer : load adecoder id adecoder.amr fail! [1970-01-01 00:00:12] ERROR : awplayer : dlopen 'libaw_oggdec.so' fail: Error loading shared library libaw_oggdec.so: No such file or directory [1970-01-01 00:00:12] ERROR : awplayer : load adecoder id adecoder.ogg fail! [1970-01-01 00:00:12] ERROR : awplayer : dlopen 'libaw_atrcdec.so' fail: Error loading shared library libaw_atrcdec.so: No such file or directory [1970-01-01 00:00:12] ERROR : awplayer : load adecoder id adecoder.atrc fail! [1970-01-01 00:00:12] ERROR : awplayer : dlopen 'libaw_radec.so' fail: Error loading shared library libaw_radec.so: No such file or directory LoadList:235>: load adecoder id adecoder.ra fail! [1970-01-01 00:00:12] ERROR : awplayer : dlopen 'libaw_siprdec.so' fail: Error loading shared library libaw_siprdec.so: No such file or directory [1970-01-01 00:00:12] ERROR : awplayer : load adecoder id adecoder.sipr fail! [1970-01-01 00:00:12] ERROR : awplayer : dlopen 'libaw_dsddec.so' fail: Error loading shared library libaw_dsddec.so: No such file or directory [1970-01-01 00:00:12] ERROR : awplayer : load adecoder id adecoder.dsd fail! [1970-01-01 00:00:12] ERROR : awplayer : dlopen 'libaw_g729dec.so' fail: Error loading shared library libaw_g729dec.so: No such file or directory [1970-01-01 00:00:12] ERROR : awplayer : load adecoder id adecoder.g729 fail! [1970-01-01 00:00:12] ERROR : awplayer : dlopen 'libaw_opusdec.so' fail: Error loading shared library libaw_opusdec.so: No such file or directory [1970-01-01 00:00:12] ERROR : awplayer : load adecoder id adecoder.opus fail! [1970-01-01 00:00:12] ERROR : awplayer : read plugin entry vdecoder-9 fail! INFO : cedarc : register h264 decoder success! INFO : cedarc : register mjpeg decoder success! INFO : cedarc : register mpeg2 decoder success! [1970-01-01 00:00:12] WARNING: awplayer : Invalid plugin,function CedarPluginVDInit not found. [1970-01-01 00:00:12] ERROR : awplayer : dlopen 'libawmpeg4dx.so' fail: Error loading shared library libawmpeg4dx.so: No such file or directory [1970-01-01 00:00:12] ERROR : awplayer : load vdecoder id vdecoder.mpeg4dx fail! INFO : cedarc : register mpeg4H263 decoder success! INFO : cedarc : register mpeg4Normal decoder success! [1970-01-01 00:00:13] ERROR : awplayer : dlopen 'libawwmv3.so' fail: Error loading shared library libawwmv3.so: No such file or directory [1970-01-01 00:00:13] ERROR : awplayer : load vdecoder id vdecoder.wmv3 fail! INFO : cedarc : register h265 decoder success! [1970-01-01 00:00:13] ERROR : awplayer : read plugin entry plugin-0 fail! [1970-01-01 00:00:13] DEBUG : awplayer : aw stream init... [1970-01-01 00:00:13] WARNING: awplayer : disable special stream wh=1280x720, vwh=1280x1440, bpp=32, rotated=0 Turn on double buffering. gsensor cfg: dx=0 dy=1 dz=0 xy=1 raw_angle=0 dangle=0 increase_angle=0 threshold_angle=3 debug=0 yes Loaded keystone factors from /etc/keystone_factor.ini: up=0.150, down=0.250 D/sec_key: (78) flash type = 3 D/sec_key: (102) Boot type 3 E/sec_key: (146) Item0 (Map) magic is bad D/sec_key: (1445) the secure storage map is empty E/sec_key: (1505) secure storage key supported D/sec_key: (102) Boot type 3 E/sec_key: (146) Item0 (Map) magic is bad D/sec_key: (1445) the secure storage map is empty D/sec_key: (1064) secure storage read disp_flip D/sec_key: (818) __probe_name_in_map E/sec_key: (1080) no item name disp_flip in the map E/sec_key: (1301) sunxi storage read fail E/sec_key: (80) [private_data_read]: Secure storage read fail D/sec_key: (422) private bare key not supported getmonth 4 set auto sleep >> 2 yanghui main 无法打开摄像头设备: No such file or directory 摄像头初始化失败 input_dev_info[i].dev_name = sunxi_ir_recv input_dev_info[i].dev_name = sunxi-gpadc0/channel0/input0 input_dev_info[i].dev_name = sunxi-gpadc0/channel1/input0 input_dev_info[i].dev_name = msa [1970-01-01 00:00:14.901] PID: 1279 TID: 1317 AUDIO_ROUTE: : begin [1970-01-01 00:00:14.901] PID: 1279 TID: 1317 AUDIO_ROUTE: : Audio HAL Version: 1.5.5 [1970-01-01 00:00:15.356] PID: 1279 TID: 1317 AUDIO_ROUTE: : startMonitoring begin [1970-01-01 00:00:15.363] PID: 1279 TID: 1317 AUDIO_ROUTE: : No headphone event found. [1970-01-01 00:00:15.363] PID: 1279 TID: 1317 AUDIO_ROUTE: : end [1970-01-01 00:00:15.363] PID: 1279 TID: 1317 AUDIO_ROUTE: : current_device_type 2 [1970-01-01 00:00:15.363] PID: 1279 TID: 1317 AUDIO_ROUTE: : vol = 96 [-INF][parm_adjust_send 54] dev type -> OUT_SPK [-INF][parm_adjust_send 55] ap -> VOLUME [-INF][parm_adjust_send 56] ap sub id -> [-INF][parm_adjust_send 57] parm file -> /etc/tmp/audio_sw_volume_param.xml [-INF][parm_server_update 348] parser file: devname(OUT_SPK) ap(VOLUME-0), file(/etc/tmp/audio_sw_volume_param.xml) [-INF][parm_adjust_send 63] sfx parm adjust send success [-INF][parm_adjust_send 54] dev type -> OUT_SPK [-INF][parm_adjust_send 55] ap -> EQ [-INF][parm_adjust_send 56] ap sub id -> [-INF][parm_adjust_send 57] parm file -> /etc/tmp/audio_sw_eq_param.xml [-INF][parm_server_update 348] parser file: devname(OUT_SPK) ap(EQ-0), file(/etc/tmp/audio_sw_eq_param.xml) [-INF][parm_adjust_send 63] sfx parm adjust send success [-INF][parm_adjust_send 54] dev type -> OUT_SPK [-INF][parm_adjust_send 55] ap -> EQ [-INF][parm_adjust_send 56] ap sub id -> [-INF][parm_adjust_send 57] parm file -> /etc/tmp/audio_sw_eq_param.xml [-INF][parm_server_update 348] parser file: devname(OUT_SPK) ap(EQ-0), file(/etc/tmp/audio_sw_eq_param.xml) [-INF][parm_adjust_send 63] sfx parm adjust send success [-INF][parm_adjust_send 54] dev type -> OUT_SPK [-INF][parm_adjust_send 55] ap -> EQ [-INF][parm_adjust_send 56] ap sub id -> [-INF][parm_adjust_send 57] parm file -> /etc/tmp/audio_sw_eq_param.xml [-INF][parm_server_update 348] parser file: devname(OUT_SPK) ap(EQ-0), file(/etc/tmp/audio_sw_eq_param.xml) [-INF][parm_adjust_send 63] sfx parm adjust send success dlopen activate lib /usr/lib/libthirdparty_mirror.so, error: Error loading shared library /usr/lib/libthirdparty_mirror.so: No such file or directory [1970-01-01 00:00:15.702] HRC-HAL : init: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [1970-01-01 00:00:15.703] HRC-HAL : init: videoPath: /dev/video0 [1970-01-01 00:00:15.703] HRC-HAL : init: format : NV12 [1970-01-01 00:00:15.703] HRC-HAL : init: debug : false [1970-01-01 00:00:15.703] HRC-HAL : init: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [1970-01-01 00:00:15.703] HRC-DEV : init: name: sunxi-hrc fd = 11 [1970-01-01 00:00:15.703] HRC-VIDEO : init: path: /dev/video0 fd: 12 [1970-01-01 00:00:15.706] HRC-HAL : init: port 0: 0 [1970-01-01 00:00:15.706] HRC-HAL : init: port 1: 0 [1970-01-01 00:00:15.706] HRC-HAL : init: port 2: 0 [1970-01-01 00:00:15.706] HRC-HAL : init: port 3: 0 [1970-01-01 00:00:15.707] HRC-VIDEO : hdmiVideoThreadLoop: start [1970-01-01 00:00:15.707] HRC-HAL : hdmiSubdevThreadLoop: start [1970-01-01 00:00:17.011] HDMIRX-API: hdmirx_app_cec_set_status: set cec status: enable [1970-01-01 00:00:17.012] HDMIRX-API: hdmirx_app_select_source: hdmirx_app_select_source 402 source_id 1 [1970-01-01 00:00:17.012] HDMIRX-API: hdmirx_app_select_source: hrcClosePicture [1970-01-01 00:00:17.012] HDMIRX-HAL: threadLoop: HDMI-CEC EventThread start Modules loaded successfully. WINF: wifimanger verion:2.0.8.5 20260429-17:50:27 d893a07 modified/untracked [ACT D][ring_buff_init,27]enter [ACT D][ring_buff_start,173]ring buffer start enter [ACT D][ring_buff_start,187]ring buffer start quit WDUG: open config file(/etc/wifi/wifimg.config)! WDUG: get config: wifi_module_name=AIC8800-6.6-P2P WDUG: open config file(/etc/wifi/wifimg.config)! WDUG: get config: wifi_module_name=AIC8800-6.6-P2P WDUG: sta mode init now WDUG: wk: sta rtos inf WDUG: wk: sta xrlink inf WINF: linux sta supplicant init now WDUG: open config file(/etc/wifi/wifimg.config)! WDUG: get config: wpa_sta_auto_reconnect=enable WDUG: wpa_set_auto_reconnect: enable WDUG: ap mode init now WDUG: wk: ap rtos inf WDUG: wk: ap xrlink WINF: linux ap init now WDUG: wk:mon mode unsupport WDUG: p2p mode init now WDUG: wk: p2p rtos inf WDUG: wk: p2p xrlink inf WINF: linux p2p supplicant init now WINF: ************************************** WINF: * Copyright (c) 2019-2025 Allwinner Technology Co., Ltd. ALL rights reserved WINF: * version: 2.0.8.5 20260429-17:50:27 d893a07 modified/untracked WINF: * module name: AIC8800-6.6-P2P (M) WINF: * wifimg support mode:(sta | ap | --- | p2p | ------ | -------) WINF: * module support mode:(sta | ap | --- | p2p | ------ | -------) WINF: * actual support mode:(sta | ap | --- | p2p | ------ | -------) WINF: ************************************** WDUG: switch( on) mode: bitmap:0X:9 WDUG: current mode: bitmap:0X:0 WDUG: enable mode: bitmap:0X:9 WDUG: disable mode: bitmap:0X:0 WDUG: after mode: bitmap:0X:9 WDUG: sta mode enabling... WDUG: open config file(/etc/wifi/wifimg.config)! WWAR: Can't get config: ip_need, used default config: 0 WDUG: open config file(/etc/wifi/wifimg.config)! WDUG: get config: wpa_sta_iface=wlan0 WDUG: open config file(/etc/wifi/wifimg.config)! WDUG: get config: wpa_sta_config_file=/wpa_supplicant/wpa_supplicant.conf WDUG: open config file(/etc/wifi/wifimg.config)! WDUG: get config: wpa_sta_iface_path=/wpa_supplicant/sockets WDUG: open config file(/etc/wifi/wifimg.config)! WDUG: get config: wpa_p2p_process=p2p_supplicant WDUG: open config file(/etc/wifi/wifimg.config)! WDUG: get config: wpa_p2p_iface=p2p-dev-wlan0 WDUG: open config file(/etc/wifi/wifimg.tonfig)! WDUG: get config: wpa_p2p_config_file=/wpa_supplicant/wpa_supplicant_p2p.conf WDUG: open config file(/etc/wifi/wifimg.config)! WDUG: get config: wpa_p2p_iface_path=/wpa_supplicant/sockets WDUG: open config file(/etc/wifi/wifimg.config)! WDUG: get config: hapd_ap_iface=wlan0 WDUG: open config file(/etc/wifi/wifimg.config)! WDUG: get config: hapd_config_file=/hostapd/hostapd.conf WDUG: open config file(/etc/wifi/wifimg.config)! WDUG: get config: hapd_ap_iface_path=/hostapd/sockets WDUG: open config file(/etc/wifi/wifimg.config)! WDUG: get config: wpa_iface_path=/wpa_supplicant/sockets WDUG: open config file(/etc/wifi/wifimg.config)! WDUG: get config: hapd_iface_path=/hostapd/sockets WDUG: system cmd: sed -i '/^ *ctrl_interface*/c\ctrl_interface=/etc/wifi/hostapd/sockets' /etc/wifi/hostapd/hostapd.conf executed successfully WDUG: system cmd: sed -i '/^ *interface*/c\interface=wlan0' /etc/wifi/hostapd/hostapd.conf executed successfully WDUG: system cmd: sed -i '/^ *interface=wlan*/c\interface=wlan0' /etc/wifi/dnsmasq.conf executed successfully WDUG: get wpad indep bitmap 4, update bitmap now WDUG: system cmd: wpa_supplicant -iwlan0 -Dnl80211 -c /etc/wifi/wpa_supplicant/wpa_supplicant.conf -m /etc/wifi/wpa_supplicant/wpa_supplicant_p2p.conf -O /etc/wifi/wpa_supplicant/sockets -B executed successfully WDUG: open connection to wpad on "/etc/wifi/wpa_supplicant/sockets/wlan0" WDUG: open connection to wpad on "/etc/wifi/wpa_supplicant/sockets/wlan0" WDUG: attach monitor_conn on "/etc/wifi/wpa_supplicant/sockets/wlan0" WDUG: create linux event(wifi_modeSTA) handle thread success WDUG: connect to wpa_supplicant ok! WDUG: init wpa_supplicant success WDUG: sta mode enable success WDUG: wifi sta mode enable success WDUG: p2p enabling... WDUG: get wpad indep bitmap 4, update bitmap now WDUG: create wpas event thread wifi mode STA WDUG: open connection to wpad on "/etc/wifi/wpa_supplicant/sockets/p2p-dev-wlan0" WDUG: open connection to wpad on "/etc/wifi/wpa_supplicant/sockets/p2p-dev-wlan0" WDUG: attach monitor_conn on "/etc/wifi/wpa_supplicant/sockets/p2p-dev-wlan0" WDUG: create linux event(wifi_modeP2P) handle thread success WDUG: connect to wpa_supplicant ok! WDUG: init wpa_supplicant success WDUG: open config file(/etc/wifi/wifimg.config)! WWAR: Can't get config: p2p_net_segment, used default config: 192.168.6 WDUG: p2p mode enable success WDUG: wifi p2p mode enable success WDUG: switch after current_mode_bitmap:0x9 WDUG: switch mode success WDUG: switch wifi mode success WINF: wifi mode UNKNOWN on success WDUG: create wpas event thread wifi mode P2P WDUG: wifimg register new msg cb WDUG: = sta_mode_ctl cmd: 10 = WDUG: = p2p_mode_ctl cmd: 7 = WDUG: = sta_mode_ctl cmd: 3 = WDUG: get reconnn flag:1