WhyCan Forum(哇酷开发者社区)

我触摸是 NS2009  怎么不能校准啊？

固件下载: tiny200_rtt_awtk_800x480_w25q128_ns2009.rar

Copy Flash offset 1M to RAM 0x8000000 size:2508352
Copy Flash Ok!
Check Image Crc32:3055548643
Image OK, Goto 0x80000000 ...

 \ | /
- RT -     Thread Operating System
 / | \     4.0.2 build Jan 14 2020
 2006 - 2019 Copyright by rt-thread team
[SFUD] Find a Winbond flash chip. Size is 16777216 bytes.
[SFUD] W25Q128 flash device is initialize success.
clk_divider_set_rate 0 198000000 0
clk_divider_set_rate 0 198000000 0
[I/I2C] I2C bus [i2c0] registered
periph_get_pll_clk:600000000
cpu_get_clk:408000000
ahb_get_clk:200000000
apb_get_clk:100000000
[D/FAL] (fal_flash_init:61) Flash device |                  W25Q128 | addr: 0x00000000 | len: 0x01000000 | blk_size: 0x00001000 |initialized finish.
[I/FAL] ==================== FAL partition table ====================
[I/FAL] | name     | flash_dev |   offset   |    length  |
[I/FAL] -------------------------------------------------------------
[I/FAL] | Littlefs | W25Q128   | 0x00600000 | 0x00a00000 |
[I/FAL] =============================================================
[I/FAL] RT-Thread Flash Abstraction Layer (V0.4.0) initialize success.
[I/FAL] The FAL MTD NOR device (Littlefs) created successfully
msh />[E/MMC] [err]:0x00000100,  RTO
[E/MMC] mmc cmd 5 err
[I/SDIO] SD card capacity 1931264 KB.

msh />ls
Directory /:
flash               <DIR>                    
mmc                 <DIR>                    
usb                 <DIR>                    
info.txt            41                       
msh />
msh />ls /mmc
Directory /mmc:
INFO.TXT            41                       
bcm.bin             80896                    
ip.bin              252176                   
f1c200              <DIR>                    
msh />ls /flash
Directory /flash:
ts_lib.dat          105                      
msh />
msh />ps
thread   pri  status      sp     stack size max used left tick  error
-------- ---  ------- ---------- ----------  ------  ---------- ---
aw_lp      6  suspend 0x00000138 0x00000800    23%   0x00000014 000
awtk       7  suspend 0x00000100 0x00010000    14%   0x00000007 000
tshell    20  running 0x00000210 0x00002000    14%   0x00000002 000
mmcsd_de  22  suspend 0x0000009c 0x00000400    49%   0x00000005 000
tidle0    31  ready   0x00000050 0x00000100    34%   0x00000013 000
msh />free
total memory: 53512944
used memory : 3151892
maximum allocated memory: 3160312
msh />list_device
device           type         ref count
-------- -------------------- ----------
sd0      Block Device         1       
Littlefs MTD Device           1       
i2c0     I2C Bus              1       
gpio     Miscellaneous Device 0       
lcd      Graphic Device       0       
W25Q128  Block Device         0       
spi00    SPI Device           0       
spi0     SPI Bus              0       
uart2    Character Device     0       
uart0    Character Device     2       
msh />
msh />

上电后先进行屏幕校准，校准完成后自动运行awtk的图表demo, enjoy it !!!