您尚未登录。

楼主 # 2021-08-20 09:39:25

inia
会员
注册时间: 2021-07-27
已发帖子: 37
积分: 42

F1C100S 卡在 Starting kernel ...

U-Boot SPL 2018.01-05682-gd83b2fefcf-dirty (Aug 20 2021 - 09:19:23)
DRAM: 32 MiB
Trying to boot from MMC1
Card did not respond to voltage select!
mmc_init: -95, time 22
spl: mmc init failed with error: -95
Trying to boot from sunxi SPI


U-Boot 2018.01-05682-gd83b2fefcf-dirty (Aug 20 2021 - 09:19:23 +0800) Allwinner Technology

CPU:   Allwinner F Series (SUNIV)
Model: Lichee Pi Nano
DRAM:  32 MiB
MMC:   SUNXI SD/MMC: 0
SF: Detected xt25f128b with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment

Setting up a 800x480 lcd console (overscan 0x0)
In:    serial@1c25000
Out:   serial@1c25000
Err:   serial@1c25000
Net:   No ethernet found.
starting USB...
No controllers found
Hit any key to stop autoboot:  0 
SF: Detected xt25f128b with page size 256 Bytes, erase size 4 KiB, total 16 MiB
device 0 offset 0x100000, size 0x4000
SF: 16384 bytes @ 0x100000 Read: OK
device 0 offset 0x110000, size 0x500000
SF: 5242880 bytes @ 0x110000 Read: OK
## Flattened Device Tree blob at 80c00000
   Booting using the fdt blob at 0x80c00000
   Loading Device Tree to 80e03000, end 80e083bd ... OK

Starting kernel ...

我使用官方的文件对烧录文件进行替换,发现问题在于 zImage ,试过很多次了,然而力弱的我,不知道问题何在。

离线

#1 2021-08-20 10:01:11

九重天
会员
注册时间: 2020-10-06
已发帖子: 25
积分: 17.5

Re: F1C100S 卡在 Starting kernel ...

zImage或者dtb有问题.

用TF卡先验证一下.

离线

楼主 #2 2021-08-20 10:32:52

inia
会员
注册时间: 2021-07-27
已发帖子: 37
积分: 42

Re: F1C100S 卡在 Starting kernel ...

九重天 说:

zImage或者dtb有问题.

用TF卡先验证一下.

配置的是SPI启动,TF卡启动不了吧!

离线

#3 2021-08-20 10:47:25

memory
会员
注册时间: 2021-08-11
已发帖子: 206
积分: 181

Re: F1C100S 卡在 Starting kernel ...

inia 说:
九重天 说:

zImage或者dtb有问题.

用TF卡先验证一下.

配置的是SPI启动,TF卡启动不了吧!

解决 V3s / F1C100s  Linux 显示 starting kernel ...  就没有然后的问题 (earlyprintk)
https://whycan.com/t_2402.html#p18400

开这个 early printk,看是不是挂在Image解压缩。

离线

楼主 #4 2021-08-20 11:27:36

inia
会员
注册时间: 2021-07-27
已发帖子: 37
积分: 42

Re: F1C100S 卡在 Starting kernel ...

@memory

Error: invalid dtb and unrecognized/unsupported machine ID
  r1=0x00000000, r2=0x00000000
Available machine support:

ID (hex)        NAME
ffffffff        Generic DT based system
ffffffff        Allwinner suniv Family
ffffffff        Allwinner sun9i Family
ffffffff        Allwinner A83t board
ffffffff        Allwinner sun8i Family
ffffffff        Allwinner sun7i (A20) Family
ffffffff        Allwinner sun6i (A31) Family
ffffffff        Allwinner sun4i/sun5i Families

Please check your kernel config and/or bootloader.

感谢老哥,终于有点眉目了。

离线

#5 2024-03-07 22:40:54

lxttian
会员
注册时间: 2020-02-29
已发帖子: 2
积分: 2

Re: F1C100S 卡在 Starting kernel ...

@inia
你好 我也遇到同样的问题了 请问解决了吗,万分感谢

离线

页脚

工信部备案:粤ICP备20025096号 Powered by FluxBB

感谢为中文互联网持续输出优质内容的各位老铁们。 QQ: 516333132, 微信(wechat): whycan_cn (哇酷网/挖坑网/填坑网) service@whycan.cn