U-Boot SPL 2020.04-00497-gc8aac3e173-dirty (Oct 07 2021 - 12:25:25 +0800)
DRAM: 128 MiB
Trying to boot from sunxi SPI
U-Boot 2020.04-00497-gc8aac3e173-dirty (Oct 07 2021 - 12:25:25 +0800) Allwinner Technology
CPU: Allwinner V3s (SUN8I 1681)
Model: Allwinner S3 Generic Device
DRAM: 128 MiB
MMC: mmc@01c0f000: 0, mmc@01c11000: 1
Card did not respond to voltage select!
Error: could not access storage.
In: serial
Out: serial
Err: serial
Allwinner mUSB OTG (Peripheral)
Net: phy interface0
Warning: ethernet@1c30000 (eth0) using random MAC address - ae:c1:5a:4e:ba:00
eth0: ethernet@1c30000
Warning: usb_ether using MAC address from ROM
, eth1: usb_ether
starting USB...
Bus usb@01c1a000: USB EHCI 1.00
Bus usb@01c1a400: USB OHCI 1.0
scanning bus usb@01c1a000 for devices... 1 USB Device(s) found
scanning bus usb@01c1a400 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
Card did not respond to voltage select!
There is no valid bmp file at the given address
Card did not respond to voltage select!
Card did not respond to voltage select!
=> sf probe 0
Invalid bus 0 (err=-19)
Failed to initialize SPI flash at 0:0
=>
离线