WhyCan Forum(哇酷开发者社区)

(0x01c25000) Physical base address of debug UART
(0xf1c25000) Virtual base address of debug UART

 [*] Enable decompressor debugging via DEBUG_LL output

[ ] Export kernel pagetable layout to userspace via debugfs                                         
[ ] Warn on W+X mappings at boot                                                                    
    Choose kernel unwinder (Frame pointer unwinder)  --->                                           
[ ] Verbose user fault messages                                                                     
[*] Kernel low-level debugging functions (read help!)                                               
      Kernel low-level debugging port (Kernel low-level debugging messages via sunXi UART0)  --->   
[ ] Enable flow control (CTS) for the debug UART                                                    
(0x01c25000) Physical base address of debug UART                                                    
(0xf1c25000) Virtual base address of debug UART                                                     
(2) Register offset shift for the 8250 debug UART                                                   
[ ]   Use 32-bit accesses for 8250 UART                                                             
[ ] 8250 UART is Palmchip BK-310x                                                                   
[*] Enable decompressor debugging via DEBUG_LL output                                               
[*] Early printk                                                                                    
< > CoreSight Tracing Support  ----                  

U-Boot 2018.01 (Nov 10 2023 - 14:40:04 +0800) Allwinner Technology

CPU:   Allwinner F Series (SUNIV)
Model: Lichee Pi Nano
DRAM:  64 MiB
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In:    serial@1c25000
Out:   serial@1c25000
Err:   serial@1c25000
Net:   No ethernet found.
starting USB...
No controllers found
Hit any key to stop autoboot:  0 
reading zImage
5103592 bytes read in 257 ms (18.9 MiB/s)
reading suniv-f1c100s-licheepi-nano.dtb
6767 bytes read in 25 ms (263.7 KiB/s)
## Flattened Device Tree blob at 80c08000
   Booting using the fdt blob at 0x80c08000
   Loading Device Tree to 816fb000, end 816ffa6e ... OK

Starting kernel ...

ÿ[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 6.6.1-licheepi-nano (shuuei@H8) (arm-linux-gnueabi-gcc (Linaro GCC 7.2-2017.11) 7.2.1 20171011, GNU ld (Linaro_Binutils-2017.11) 2.28.2.20170706) #1 Tue Nov 14 12:13:41 CST 2023
[    0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] OF: fdt: Machine model: Lichee Pi Nano
[    0.000000] Memory policy: Data cache writeback
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000080000000-0x0000000083ffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x0000000083ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000083ffffff]
[    0.000000] Kernel command line: console=tty0 console=ttyS0,115200 panic=5 rootwait root=/dev/mmcblk0p2 rw
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16256
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 51708K/65536K available (8192K kernel code, 610K rwdata, 1944K rodata, 1024K init, 262K bss, 13828K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000010] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000128] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000885] Console: colour dummy device 80x30
[    0.000945] printk: console [tty0] enabled
[    0.001957] Calibrating delay loop... 203.16 BogoMIPS (lpj=1015808)
[    0.070338] CPU: Testing write buffer coherency: ok
[    0.070703] pid_max: default: 32768 minimum: 301
[    0.071329] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.071509] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.078361] Setting up static identity map for 0x80100000 - 0x80100058
[    0.080948] devtmpfs: initialized
[    0.087473] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.087702] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[    0.088070] pinctrl core: initialized pinctrl subsystem
[    0.093524] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.095236] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.097866] thermal_sys: Registered thermal governor 'step_wise'
[    0.097976] cpuidle: using governor menu
[    0.116400] SCSI subsystem initialized
[    0.116915] usbcore: registered new interface driver usbfs
[    0.117171] usbcore: registered new interface driver hub
[    0.117427] usbcore: registered new device driver usb
[    0.118155] pps_core: LinuxPPS API ver. 1 registered
[    0.118278] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.118472] PTP clock support registered
[    0.119182] Advanced Linux Sound Architecture Driver Initialized.
[    0.122858] clocksource: Switched to clocksource timer
[    0.172690] NET: Registered PF_INET protocol family
[    0.173630] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.175738] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.175971] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.176105] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.176243] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.176364] TCP: Hash tables configured (established 1024 bind 1024)
[    0.176674] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.176830] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.177541] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.179659] RPC: Registered named UNIX socket transport module.
[    0.179828] RPC: Registered udp transport module.
[    0.179896] RPC: Registered tcp transport module.
[    0.179952] RPC: Registered tcp-with-tls transport module.
[    0.180008] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.187319] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.189386] Initialise system trusted keyrings
[    0.191243] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[    0.194152] NFS: Registering the id_resolver key type
[    0.194564] Key type id_resolver registered
[    0.194663] Key type id_legacy registered
[    0.779017] Key type asymmetric registered
[    0.779160] Asymmetric key parser 'x509' registered
[    0.779532] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.779677] io scheduler mq-deadline registered
[    0.779750] io scheduler kyber registered
[    1.080610] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    1.102231] SCSI Media Changer driver v0.25 
[    1.104916] usbcore: registered new interface driver usb-storage
[    1.105995] UDC core: g_cdc: couldn't find an available UDC
[    1.106472] i2c_dev: i2c /dev entries driver
[    1.110250] usbcore: registered new interface driver usbhid
[    1.110399] usbhid: USB HID core driver
[    1.128556] NET: Registered PF_PACKET protocol family
[    1.129058] Key type dns_resolver registered
[    1.147625] Loading compiled-in X.509 certificates
[    1.178502] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    1.191950] suniv-f1c100s-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    1.193846] suniv-f1c100s-pinctrl 1c20800.pinctrl: supply vcc-pe not found, using dummy regulator
[    1.197290] printk: console [ttyS0] disabled
[    1.218992] 1c25000.serial: ttyS0 at MMIO 0x1c25000 (irq = 116, base_baud = 6250000) is a 16550A
[    1.219293] printk: console [ttyS0] enabled
[    1.765950] suniv-f1c100s-pinctrl 1c20800.pinctrl: supply vcc-pc not found, using dummy regulator
[    1.776093] sun6i-spi 1c05000.spi: Failed to request TX DMA channel
[    1.782522] sun6i-spi 1c05000.spi: Failed to request RX DMA channel
[    1.791978] spi-nor spi0.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00
[    1.805859] usb_phy_generic usb_phy_generic.0.auto: dummy supplies not allowed for exclusive requests
[    1.816803] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    1.822787] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    1.833133] suniv-f1c100s-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    1.848884] hub 1-0:1.0: USB hub found
[    1.853009] hub 1-0:1.0: 1 port detected
[    1.862986] g_cdc gadget.0: HOST MAC 2a:94:65:ec:bc:00
[    1.868293] g_cdc gadget.0: MAC 4e:28:99:a6:0f:da
[    1.873399] g_cdc gadget.0: CDC Composite Gadget, version: King Kamehameha Day 2008
[    1.881175] g_cdc gadget.0: g_cdc ready
[    1.886983] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
[    1.895319] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    1.916665] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    1.922555] clk: Disabling unused clocks
[    1.926871] ALSA device list:
[    1.929930]   #0: Loopback 1
[    1.934108] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    1.943015] cfg80211: failed to load regulatory.db
[    1.948955] Waiting for root device /dev/mmcblk0p2...
[    1.978682] mmc0: new high speed SDHC card at address 1234
[    1.986969] mmcblk0: mmc0:1234 SA32G 28.9 GiB
[    1.997897]  mmcblk0: p1 p2
[    2.038375] EXT4-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended
[    2.050929] EXT4-fs (mmcblk0p2): mounted filesystem 3e7efd13-1cec-4308-8ab8-1ad307ad6d13 r/w with ordered data mode. Quota mode: disabled.
[    2.063813] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    2.071887] devtmpfs: mounted
[    2.079475] Freeing unused kernel image (initmem) memory: 1024K
[    2.085777] Run /sbin/init as init process
[    2.198287] sunxi-mmc 1c0f000.mmc: data error, sending stop command
[    2.205439] sunxi-mmc 1c0f000.mmc: data error, sending stop command
[    2.212448] sunxi-mmc 1c0f000.mmc: data error, sending stop command
[    2.219544] sunxi-mmc 1c0f000.mmc: data error, sending stop command
[    2.226644] sunxi-mmc 1c0f000.mmc: data error, sending stop command
[    2.285823] sunxi-mmc 1c0f000.mmc: data error, sending stop command
[    2.292397] I/O error, dev mmcblk0, sector 67776 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
[    2.301839] EXT4-fs error (device mmcblk0p2): ext4_read_inode_bitmap:203: comm init: Cannot read inode bitmap - block_group = 0, inode_bitmap = 24
[    2.328921] EXT4-fs (mmcblk0p2): re-mounted 3e7efd13-1cec-4308-8ab8-1ad307ad6d13 r/w. Quota mode: disabled.
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
seedrng: can't create directory '/var/lib/seedrng': No space left on device
Starting network: OK

Welcome Aboard!
1F login: [    4.003972] sunxi-mmc 1c0f000.mmc: data error, sending stop command
[    4.011036] sunxi-mmc 1c0f000.mmc: data error, sending stop command
[    4.018751] sunxi-mmc 1c0f000.mmc: data error, sending stop command
[    4.026051] sunxi-mmc 1c0f000.mmc: data error, sending stop command
[    4.033112] sunxi-mmc 1c0f000.mmc: data error, sending stop command
[    4.092060] sunxi-mmc 1c0f000.mmc: data error, sending stop command
[    4.098742] I/O error, dev mmcblk0, sector 67648 op 0x0:(READ) flags 0x83700 phys_seg 1 prio class 2
[    4.109124] sunxi-mmc 1c0f000.mmc: data error, sending stop command
[    4.116416] sunxi-mmc 1c0f000.mmc: data error, sending stop command
[    4.123790] sunxi-mmc 1c0f000.mmc: data error, sending stop command
[    4.130956] sunxi-mmc 1c0f000.mmc: data error, sending stop command
[    4.138238] sunxi-mmc 1c0f000.mmc: data error, sending stop command
[    4.145464] sunxi-mmc 1c0f000.mmc: data error, sending stop command
[    4.152077] I/O error, dev mmcblk0, sector 67648 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
[    4.164063] EXT4-fs error (device mmcblk0p2): ext4_wait_block_bitmap:576: comm ext4lazyinit: Cannot read block bitmap - block_group = 0, block_bitmap = 8
[  305.122899] EXT4-fs (mmcblk0p2): error count since last fsck: 12
[  305.129078] EXT4-fs (mmcblk0p2): initial error at time 2: ext4_read_inode_bitmap:203
[  305.136913] EXT4-fs (mmcblk0p2): last error at time 4: ext4_wait_block_bitmap:576
[  324.093005] random: crng init done

Welcome Aboard!
1F login: root
Password: 
# df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/root                91864     91864         0 100% /
devtmpfs                 25852         0     25852   0% /dev
tmpfs                    26364         0     26364   0% /dev/shm
tmpfs                    26364        20     26344   0% /tmp
tmpfs                    26364        16     26348   0% /run
# poweroff 
# Stopping network: OK
seedrng: can't create directory '/var/lib/seedrng': No space left on device
Stopping klogd: OK
Stopping syslogd: OK
umount: devtmpfs busy - remounted read-only
[  870.855436] EXT4-fs (mmcblk0p2): re-mounted 3e7efd13-1cec-4308-8ab8-1ad307ad6d13 ro. Quota mode: disabled.
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system poweroff
[  872.879692] reboot: System halted