#2 Re: 全志 SOC » T113 的Tina想开机运行自己的启动程序 » 2024-05-08 09:57:52
楼主，麻烦问一下，我是想在设置tina linux的自启动文件，但是一直没有成功，能帮忙看看大概哪里错了吗？ 下面是我的流程：
我在/etc/init.d目录下创建了ubus文件，内容如下，并添加了执行权限，然后使用了/etc/init.d/ubus enable在rc.d目录下面创建软连接，但是重启系统的这个文件并没有执行
#!/bin/ash /etc/rc.common
# ubus init script
USE_PROCD=1
START=01
STOP=01
start_service() {
echo "ubus start"
if [ ! -d /var/run ]; then
mkdir /var/run
fi
if [ ! -f /var/run/ubus.sock ]; then
echo -n > /var/run/ubus
fi
procd_open_instance
procd_set_param command "/bin/ubusd"
procd_set_param respawn
procd_close_instance
}
stop_service() {
echo "ubus stop"
killall ubusd
}#4 全志 SOC » 关于ubus的报错问题Error: Failed to connect to ubus » 2024-05-07 09:27:02
- 子非鱼
- 回复： 0
root@TinaLinux:/# ps | grep ubusd
270 root 976 S /sbin/ubusd
295 root 1036 S grep ubusd
root@TinaLinux:/# fw3
Error: Failed to connect to ubus
root@TinaLinux:/#
root@TinaLinux:/# ubus list
root@TinaLinux:/#
root@TinaLinux:/#系统有ubusd正在运行，/bin目录下面也有ubus程序，但是当我使用ubus list的时候显示为空，使fw3的时候报错Error: Failed to connect to ubus，此外/etc/init.d目录下面的好多脚本的restart都会出现这个错误，该怎么解决？
#5 全志 SOC » tina linux如何设置自启动脚本 » 2024-04-19 16:45:30
- 子非鱼
- 回复： 0
我在/etc/init.d目录下创建了S90auto文件，并赋予了其可执行权限，S90auto内容如下
#!/bin/sh /etc/rc.common
# Example script
# Copyright (C) 2007 OpenWrt.org
START=90
STOP=15
start() {
sleep 10
echo 11111111111111111111111start
ifconfig eth0 up
udhcpc
#commands to launch application, such as above
}
stop() {
echo 222222222222222222222222222stop
}并且我使用了/etc/init.d/S90auto enable 成功在/etc/rc.d目录下创建了连接，但是在我使用reboot重启的时候，stop()在系统关闭的时候运行了，但是系统启动后并没有运行start() 里面的内容。而且单独使用/etc/init.d/S90auto start 也可以成功运行。请问怎么才能设置成系统运行自启动脚本
#7 Re: 全志 SOC » adb提示No space left on device » 2024-03-16 13:57:11
@晕哥
这是改了sys_partition.fex启动后系统空间的信息，可以创建修改文件，但是空间并没有变大
[partition]
name = rootfs_data
size = 40960
user_type = 0x8000root@TinaLinux:/# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 31.5M 31.5M 0 100% /rom
devtmpfs 53.0M 0 53.0M 0% /dev
tmpfs 57.5M 0 57.5M 0% /tmp
/dev/by-name/rootfs_data
15.3M 1.5M 12.9M 10% /overlay
overlayfs:/overlay 15.3M 1.5M 12.9M 10% /
tmpfs 57.5M 0 57.5M 0% /run
/dev/ubi0_8 27.1M 24.0K 25.6M 0% /mnt/UDISK#9 Re: 全志 SOC » adb提示No space left on device » 2024-03-15 13:35:15
晕哥 说：
@子非鱼
就是 rootfs_data 空间不够，修改 板级目录下面的 sys_partition.fex 对应rootfs_data的空间大小
好像还是不行,我把device/config/chips/t113/configs/100ask/sys_partition.fex中的rootfs_data从10240改到了40960，但是使用adb push的时候还是提示remote No space left on device
[partition]
name = rootfs_data
size = 40960
user_type = 0x8000C:\Users\76455>adb push E:\Projects\Cpro\wruart /
adb: error: failed to copy 'E:\Projects\Cpro\wruart' to '/wruart': remote No space left on device
E:\Projects\Cpro\wruart: 0 files pushed. 0.5 MB/s (8600 bytes in 0.018s)#10 Re: 全志 SOC » adb提示No space left on device » 2024-03-15 09:49:57
#11 Re: 全志 SOC » adb提示No space left on device » 2024-03-15 09:37:28
晕哥 说：
@子非鱼
这个是正常，还是不正常的？
我想增大系统文件的空间，想着这样是不是在上传文件的时候就不会提示remote No space left on device，然后从网上看的别人说把系统文件改为ext4格式的，所以当我在menuconfig里使能了ext4，又出现我前面几楼贴出的问题
[ 3.286362] No filesystem could mount root, tried:
[ 3.286364] squashfs
[ 3.296004] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(254,0)[ 3.206709] VFS: Cannot open root device "ubiblock0_5" or unknown-block(254,0): error -19
[ 3.215884] Please append a correct "root=" boot option; here are the available partitions:
[ 3.225262] 1f00 1024 mtdblock0
[ 3.225265] (driver?)
[ 3.232586] 1f01 3072 mtdblock1
[ 3.232589] (driver?)
[ 3.239905] 1f02 1024 mtdblock2
[ 3.239907] (driver?)
[ 3.247206] 1f03 125952 mtdblock3
[ 3.247209] (driver?)
[ 3.254520] fe00 82152 ubiblock0_5
[ 3.254522] (driver?)
[ 3.262020] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(254,0)#12 Re: 全志 SOC » adb提示No space left on device » 2024-03-15 09:29:51
#13 Re: 全志 SOC » adb提示No space left on device » 2024-03-15 09:18:19
晕哥 说：
子非鱼 说：上传的时候终端上什么都没有显示，需要用什么命令查看吗？
从上电开始的串口日志。
这是我还没有配置文件系统为ext4的时候，使用adb push提示remote No space left on device的时候的板子的上电信息
[29]HELLO! BOOT0 is starting!
[32]BOOT0 commit : 88480af-dirty
[35]set pll start
[41]periph0 has been enabled
[44]set pll end
[45][pmu]: bus read error
[48]board init ok
[50]ZQ value = 0x2d
[51]get_pmu_exist() = -1
[54]DRAM BOOT DRIVE INFO: V0.33
[57]DRAM CLK = 936 MHz
[59]DRAM Type = 3 (2:DDR2,3:DDR3)
[62]DRAMC read ODT off.
[65]DRAM ODT value: 0x42.
[67]ddr_efuse_type: 0xa
[70]DRAM SIZE =128 M
[72]dram_tpr4:0x0
[74]PLL_DDR_CTRL_REG:0xf8004d00
[77]DRAM_CLK_REG:0xc0000000
[79][TIMING DEBUG] MR2= 0x20
[87]DRAM simple test OK.
[89]rtc standby flag is 0x0, super standby flag is 0x0
[94]dram size =128
[97]spinand UBOOT_START_BLK_NUM 8 UBOOT_LAST_BLK_NUM 32
[102]block from 8 to 32
[210]Check is correct.
[212]dma 0x29c0c int is not used yet
[216]dma 0x29c0c int is free, you do not need to free it again
[221]Entry_name = u-boot
[227]Entry_name = optee
[231]Entry_name = dtb
[234]Jump to second Boot.
M/TC: OP-TEE version: 6aef7bb2-dirty (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) #1 Fri Jul 23 09:25:11 UTC 2021 arm
U-Boot 2018.05-g24521d6-dirty (Mar 12 2024 - 19:33:32 -0700) Allwinner Technology
[00.287]CPU: Allwinner Family
[00.290]Model: sun8iw20
I2C: FDT ERROR:fdt_set_all_pin:[twi0]-->FDT_ERR_BADPATH
FDT ERROR:fdt_set_all_pin:[twi1]-->FDT_ERR_BADPATH
ready
[00.311]DRAM: 128 MiB
[00.315]Relocation Offset is: 04f01000
[00.334]secure enable bit: 0
[00.336]smc_tee_inform_fdt failed with: -65526[00.341]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=300Mhz
[00.347]gic: sec monitor mode
[00.350]flash init start
[00.352]workmode = 0,storage type = 0
sspi->base_addr = 0x4025000, the SPI control register:
[VER] 0x4025000 = 0x00010001, [GCR] 0x4025004 = 0x00000083, [TCR] 0x4025008 = 0x00000184
[ICR] 0x4025010 = 0x00000f00, [ISR] 0x4025014 = 0x00000032, [FCR] 0x4025018 = 0x00200020
[FSR] 0x402501c = 0x00000000, [WCR] 0x4025020 = 0x00000000, [CCR] 0x4025024 = 0x00000002
[SDC] 0x4025028 = 0x00002000, [BCR] 0x4025030 = 0x00000000, [TCR] 0x4025034 = 0x00000000
[BCC] 0x4025038 = 0x10000000, [DMA] 0x4025088 = 0x000000e5
[00.399]sunxi-spinand-phy: not detect any munufacture from id table
[00.406]sunxi-spinand-phy: get spi-nand Model from fdt fail
[00.411]sunxi-spinand-phy: get phy info from fdt fail
device nand0 <nand>, # parts = 4
#: name size offset mask_flags
0: boot0 0x00100000 0x00000000 1
1: uboot 0x00300000 0x00100000 1
2: secure_storage 0x00100000 0x00400000 1
3: sys 0x07b00000 0x00500000 0
active partition: nand0,0 - (boot0) 0x00100000 @ 0x00000000
defaults:
mtdids : nand0=nand
mtdparts: mtdparts=nand:1024k@0(boot0)ro,3072k@1048576(uboot)ro,1024k@4194304(secure_storage)ro,-(sys)
[00.528]ubi0: attaching mtd4
[00.754]ubi0: scanning is finished
[00.763]ubi0: attached mtd4 (name "sys", size 123 MiB)
[00.768]ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 258048 bytes
[00.774]ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 2048
[00.780]ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[00.786]ubi0: good PEBs: 492, bad PEBs: 0, corrupted PEBs: 0
[00.792]ubi0: user volume: 9, internal volumes: 1, max. volumes count: 128
[00.798]ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
[00.806]ubi0: available PEBs: 0, total reserved PEBs: 492, PEBs reserved for bad PEB handling: 20
[00.814]sunxi flash init ok
[01.021]Loading Environment from SUNXI_FLASH... OK
[01.060]Item0 (Map) magic is bad
secure storage read widevine fail
[01.065]secure storage read widevine fail with:-1
secure storage read ec_key fail
[01.073]secure storage read ec_key fail with:-1
secure storage read ec_cert1 fail
[01.080]secure storage read ec_cert1 fail with:-1
secure storage read ec_cert2 fail
[01.087]secure storage read ec_cert2 fail with:-1
secure storage read ec_cert3 fail
[01.095]secure storage read ec_cert3 fail with:-1
secure storage read rsa_key fail
[01.102]secure storage read rsa_key fail with:-1
secure storage read rsa_cert1 fail
[01.110]secure storage read rsa_cert1 fail with:-1
secure storage read rsa_cert2 fail
[01.117]secure storage read rsa_cert2 fail with:-1
secure storage read rsa_cert3 fail
[01.125]secure storage read rsa_cert3 fail with:-1
[01.129]usb burn from boot
delay time 0
weak:otg_phy_config
[01.141]usb prepare ok
[01.347]usb sof ok
[01.349]usb probe ok
[01.351]usb setup ok
set address 0x10
set address 0x10 ok
set address 0x11
set address 0x11 ok
try to update
[04.355]do_burn_from_boot usb : have no handshake
[04.382]update bootcmd
[04.407]change working_fdt 0x43ec0e70 to 0x43ea0e70
[04.425]update dts
Hit any key to stop autoboot: 0
[05.890]no vendor_boot partition is found
Android's image name: t113-100ask
[05.900]Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.61 (lcm@ubuntu) (arm-openwrt-linux-muslgnueabi-gcc.bin (OpenWrt/Linaro GCC 6.4-2017.1 1 2017-11) 6.4.1, GNU ld (GNU Binutils) 2.27) #19 SMP PREEMPT Thu Mar 14 02:49:16 UTC 2024
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: sun8iw20
[ 0.000000] printk: bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x47800000
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 15 pages/cpu s30412 r8192 d22836 u61440
[ 0.000000] pcpu-alloc: s30412 r8192 d22836 u61440 alloc=15*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: ubi.mtd=sys ubi.block=0,rootfs earlyprintk=sunxi-uart,0x02500C00 clk_ignore_unused initcall_debug=0 console=ttyS3,115200 loglevel=8 root=/dev/ubiblock0_5 rootfstype=squashfs init=/pseudo_init partitio ns=mbr@ubi0_0:boot-resource@ubi0_1:env@ubi0_2:env-redund@ubi0_3:boot@ubi0_4:rootfs@ubi0_5:private@ubi0_6:rootfs_data@u bi0_7:UDISK@ubi0_8: cma=8M snum= mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.hardware=sun8iw20p1 boot_ty pe=5 androidboot.boot_type=5 gpt=1 uboot_message=2018.05-g24521d6-dirty(03/12/2024-19:33:32) aw-ubi-spinand.ubootblks= 24 androidboot.dramsize=128
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 108612K/131072K available (6144K kernel code, 267K rwdata, 1520K rodata, 1024K init, 1163K bss, 14268K reserved, 8192K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x264/0x3e8 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 44079520259 2 ns
[ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.008007] Switching to timer-based delay loop, resolution 41ns
[ 0.014183] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.023908] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.034282] pid_max: default: 32768 minimum: 301
[ 0.039037] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.046361] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.054684] CPU: Testing write buffer coherency: ok
[ 0.059891] /cpus/cpu@0 missing clock-frequency property
[ 0.065199] /cpus/cpu@1 missing clock-frequency property
[ 0.070545] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.076715] Setting up static identity map for 0x40100000 - 0x40100060
[ 0.083381] rcu: Hierarchical SRCU implementation.
[ 0.088581] smp: Bringing up secondary CPUs ...
[ 0.094194] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.094313] smp: Brought up 1 node, 2 CPUs
[ 0.104151] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[ 0.110346] CPU: All CPU(s) started in SVC mode.
[ 0.115419] devtmpfs: initialized
[ 0.130185] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.138313] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.148186] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.155424] pinctrl core: initialized pinctrl subsystem
[ 0.161593] NET: Registered protocol family 16
[ 0.167484] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.204080] rtc_ccu: sunxi ccu init OK
[ 0.210079] ccu: sunxi ccu init OK
[ 0.213829] r_ccu: sunxi ccu init OK
[ 0.237187] iommu: Default domain type: Translated
[ 0.242259] sunxi iommu: irq = 24
[ 0.246447] SCSI subsystem initialized
[ 0.250411] usbcore: registered new interface driver usbfs
[ 0.255964] usbcore: registered new interface driver hub
[ 0.261361] usbcore: registered new device driver usb
[ 0.267202] Advanced Linux Sound Architecture Driver Initialized.
[ 0.274039] Bluetooth: Core ver 2.22
[ 0.277673] NET: Registered protocol family 31
[ 0.282119] Bluetooth: HCI device and connection manager initialized
[ 0.288550] Bluetooth: HCI socket layer initialized
[ 0.293433] Bluetooth: L2CAP socket layer initialized
[ 0.298518] Bluetooth: SCO socket layer initialized
[ 0.303644] pwm module init!
[ 0.307733] g2d 5410000.g2d: Adding to iommu group 0
[ 0.313014] G2D: rcq version initialized.major:252
[ 0.318607] clocksource: Switched to clocksource arch_sys_counter
[ 0.333270] sun8iw20-pinctrl pio: initialized sunXi PIO driver
[ 0.341559] NET: Registered protocol family 2
[ 0.346607] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.355025] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.362715] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.369803] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.376247] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.382818] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.389985] NET: Registered protocol family 1
[ 0.395286] sun8iw20-pinctrl pio: pio supply vcc-pc not found, using dummy regulator
[ 0.403515] spi spi0: spi0 supply spi not found, using dummy regulator
[ 0.410255] sunxi_spi_resource_get()2151 - [spi0] SPI MASTER MODE
[ 0.416404] sunxi_spi_resource_get()2189 - Failed to get sample mode
[ 0.422799] sunxi_spi_resource_get()2194 - Failed to get sample delay
[ 0.429252] sunxi_spi_resource_get()2198 - sample_mode:-1431633921 sample_delay:-1431633921
[ 0.437650] sunxi_spi_clk_init()2240 - [spi0] mclk 100000000
[ 0.443898] sunxi_spi_probe()2653 - [spi0]: driver probe succeed, base c881f000, irq 44
[ 0.453484] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.464203] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.470237] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.503096] io scheduler mq-deadline registered
[ 0.507641] io scheduler kyber registered
[ 0.512978] [DISP]disp_module_init
[ 0.516825] disp 5000000.disp: Adding to iommu group 0
[ 0.533633] disp 5000000.disp: 5000000.disp supply vcc-lcd not found, using dummy regulator
[ 0.542247] disp 5000000.disp: 5000000.disp supply vcc-pd not found, using dummy regulator
[ 0.555841] display_fb_request,fb_id:0
[ 0.563162] [DISP] Fb_copy_boot_fb,line:1443:
[ 0.563166] no boot_fb0
[ 0.570455] disp_al_manager_apply ouput_type:0
[ 0.575225] [DISP] lcd_clk_config,line:732:
[ 0.575236] disp 0, clk: pll(306000000),clk(306000000),dclk(51000000) dsi_rate(306000000)
[ 0.575236] clk real:pll(300000000),clk(300000000),dclk(50000000) dsi_rate(0)
[ 0.578926] [DISP]disp_module_init finish
[ 0.580371] sun8iw20-pinctrl pio: pio supply vcc-pd not found, using dummy regulator
[ 0.596175] sunxi_sid_init()551 - insmod ok
[ 0.611851] lcm:__init start
[ 0.615049] sun8iw20-pinctrl pio: pio supply vcc-pe not found, using dummy regulator
[ 0.622958] lcm: uart probe
[ 0.625914] lcm: pdev id = 2
[ 0.628851] lcm: uart2
[ 0.631319] uart uart2: get regulator failed
[ 0.635608] uart uart2: uart2 supply uart not found, using dummy regulator
[ 0.642740] lcm: have the linux,rs485-enabled-at-boot-time
[ 0.648263] uart2: ttyS2 at MMIO 0x2500800 (irq = 34, base_baud = 1500000) is a SUNXI
[ 0.656671] sun8iw20-pinctrl pio: pio supply vcc-pb not found, using dummy regulator
[ 0.664608] lcm: uart probe
[ 0.667552] lcm: pdev id = 3
[ 0.670480] lcm: uart3
[ 0.672955] uart uart3: get regulator failed
[ 0.677236] uart uart3: uart3 supply uart not found, using dummy regulator
[ 0.684356] uart3: ttyS3 at MMIO 0x2500c00 (irq = 35, base_baud = 1500000) is a SUNXI
[ 0.692220] sw_console_setup()1808 - console setup baud 115200 parity n bits 8, flow n
▒[ 0.700222] printk: console [ttyS3] enabled
[ 0.700222] printk: console [ttyS3] enabled
[ 0.709138] printk: bootconsole [earlycon0] disabled
[ 0.709138] printk: bootconsole [earlycon0] disabled
[ 0.720157] lcm: uart probe
[ 0.723404] lcm: pdev id = 4
[ 0.726610] lcm: uart4
[ 0.729376] uart uart4: get regulator failed
[ 0.734162] uart uart4: uart4 supply uart not found, using dummy regulator
[ 0.742041] lcm: have the linux,rs485-enabled-at-boot-time
[ 0.748208] uart4: ttyS4 at MMIO 0x2501000 (irq = 36, base_baud = 1500000) is a SUNXI
[ 0.757510] sun8iw20-pinctrl pio: pio supply vcc-pg not found, using dummy regulator
[ 0.766306] lcm: uart probe
[ 0.769583] lcm: pdev id = 5
[ 0.772790] lcm: uart5
[ 0.775514] uart uart5: get regulator failed
[ 0.780297] uart uart5: uart5 supply uart not found, using dummy regulator
[ 0.788226] uart5: ttyS5 at MMIO 0x2501400 (irq = 37, base_baud = 1500000) is a SUNXI
[ 0.797776] misc dump reg init
[ 0.802226] sunxi-rfkill soc@3000000:rfkill@0: module version: v1.0.9
[ 0.808802] [DISP] disp_device_attached_and_enable,line:233:
[ 0.808807] attached ok, mgr0<-->dev0
[ 0.809453] sunxi-rfkill soc@3000000:rfkill@0: get gpio chip_en failed
[ 0.815710] [DISP] disp_device_attached_and_enable,line:236:
[ 0.815717] type:1,mode:0,fmt:rgb,bits:8bits,eotf:4,cs:0 dvi_hdmi:2, range:2 scan:0 ratio:8
[ 0.819822] sunxi-rfkill soc@3000000:rfkill@0: get gpio power_en failed
[ 0.850090] sunxi-rfkill soc@3000000:rfkill@0: wlan_busnum (1)
[ 0.856595] sunxi-rfkill soc@3000000:rfkill@0: Missing wlan_power.
[ 0.863506] sunxi-rfkill soc@3000000:rfkill@0: wlan clock[0] (32k-fanout1)
[ 0.871209] sunxi-rfkill soc@3000000:rfkill@0: wlan_regon gpio=204 assert=1
[ 0.879019] sunxi-rfkill soc@3000000:rfkill@0: wlan_hostwake gpio=202 assert=1
[ 0.887085] sunxi-rfkill soc@3000000:rfkill@0: wakeup source is enabled
[ 0.894688] sunxi-rfkill soc@3000000:rfkill@0: Missing bt_power.
[ 0.901417] sunxi-rfkill soc@3000000:rfkill@0: bt clock[0] (32k-fanout1)
[ 0.908927] sunxi-rfkill soc@3000000:rfkill@0: bt_rst gpio=207 assert=0
[ 0.917030] dma-buf: Running sanitycheck
[ 0.921444] dma-buf: Running dma_fence
[ 0.925616] sizeof(dma_fence)=48
[ 0.929354] dma-buf: Running dma_fence/sanitycheck
[ 0.934702] dma-buf: Running dma_fence/test_signaling
[ 0.940360] dma-buf: Running dma_fence/test_add_callback
[ 0.946278] dma-buf: Running dma_fence/test_late_add_callback
[ 0.952728] dma-buf: Running dma_fence/test_rm_callback
[ 0.958558] dma-buf: Running dma_fence/test_late_rm_callback
[ 0.964877] dma-buf: Running dma_fence/test_status
[ 0.970223] dma-buf: Running dma_fence/test_error
[ 0.975470] dma-buf: Running dma_fence/test_wait
[ 0.980625] dma-buf: Running dma_fence/test_wait_timeout
[ 1.018621] dma-buf: Running dma_fence/test_stub
[ 1.023790] dma-buf: Running dma_fence/race_signal_callback
[ 1.098638] thread_signal_callback[0] completed 34749 passes, 342 misses
[ 1.106135] thread_signal_callback[1] completed 34727 passes, 322 misses
[ 1.178628] thread_signal_callback[0] completed 38010 passes, 38009 misses
[ 1.186337] thread_signal_callback[1] completed 37995 passes, 37994 misses
[ 1.194534] sunxi-spinand: AW SPINand MTD Layer Version: 2.0 20201228
[ 1.201796] sunxi-spinand-phy: AW SPINand Phy Layer Version: 1.10 20200306
[ 1.209761] sunxi-spinand-phy: not detect any munufacture from id table
[ 1.217131] sunxi-spinand-phy: get spi-nand Model from fdt fail
[ 1.223752] sunxi-spinand-phy: get phy info from fdt fail
[ 1.229821] sunxi-spinand-phy: not detect munufacture from fdt
[ 1.236496] sunxi-spinand-phy: detect munufacture from id table: Winbond
[ 1.243985] sunxi-spinand-phy: detect spinand id: ff21aaef ffffffff
[ 1.250978] sunxi-spinand-phy: ========== arch info ==========
[ 1.257474] sunxi-spinand-phy: Model: W25N01GVZEIG
[ 1.264173] sunxi-spinand-phy: Munufacture: Winbond
[ 1.270385] sunxi-spinand-phy: DieCntPerChip: 1
[ 1.276009] sunxi-spinand-phy: BlkCntPerDie: 1024
[ 1.281930] sunxi-spinand-phy: PageCntPerBlk: 64
[ 1.287647] sunxi-spinand-phy: SectCntPerPage: 4
[ 1.293285] sunxi-spinand-phy: OobSizePerPage: 64
[ 1.299015] sunxi-spinand-phy: BadBlockFlag: 0x0
[ 1.304829] sunxi-spinand-phy: OperationOpt: 0x7
[ 1.310655] sunxi-spinand-phy: MaxEraseTimes: 65000
[ 1.316664] sunxi-spinand-phy: EccFlag: 0x0
[ 1.322488] sunxi-spinand-phy: EccType: 2
[ 1.328111] sunxi-spinand-phy: EccProtectedType: 3
[ 1.333742] sunxi-spinand-phy: ========================================
[ 1.341114] sunxi-spinand-phy:
[ 1.344607] sunxi-spinand-phy: ========== physical info ==========
[ 1.351497] sunxi-spinand-phy: TotalSize: 128 M
[ 1.356827] sunxi-spinand-phy: SectorSize: 512 B
[ 1.362169] sunxi-spinand-phy: PageSize: 2 K
[ 1.367307] sunxi-spinand-phy: BlockSize: 128 K
[ 1.372650] sunxi-spinand-phy: OOBSize: 64 B
[ 1.377886] sunxi-spinand-phy: ========================================
[ 1.385265] sunxi-spinand-phy:
[ 1.388776] sunxi-spinand-phy: ========== logical info ==========
[ 1.395562] sunxi-spinand-phy: TotalSize: 128 M
[ 1.400902] sunxi-spinand-phy: SectorSize: 512 B
[ 1.406233] sunxi-spinand-phy: PageSize: 4 K
[ 1.411382] sunxi-spinand-phy: BlockSize: 256 K
[ 1.416713] sunxi-spinand-phy: OOBSize: 128 B
[ 1.422051] sunxi-spinand-phy: ========================================
[ 1.429565] sunxi-spinand-phy: block lock register: 0x00
[ 1.435658] sunxi-spinand-phy: feature register: 0x19
[ 1.441300] sunxi-spinand-phy: sunxi physic nand init end
[ 1.447763] Creating 4 MTD partitions on "sunxi_mtd_nand":
[ 1.453903] 0x000000000000-0x000000100000 : "boot0"
[ 1.469462] 0x000000100000-0x000000400000 : "uboot"
[ 1.479199] random: fast init done
[ 1.489497] 0x000000400000-0x000000500000 : "secure_storage"
[ 1.509470] 0x000000500000-0x000008000000 : "sys"
[ 1.719903] libphy: Fixed MDIO Bus: probed
[ 1.725211] sun8iw20-pinctrl pio: pin PE2 already requested by 2500800.uart; cannot claim for 4500000.eth
[ 1.735922] sun8iw20-pinctrl pio: pin-130 (4500000.eth) status -22
[ 1.742820] sun8iw20-pinctrl pio: could not request pin 130 (PE2) from group PE2 on device pio
[ 1.752526] sunxi-gmac 4500000.eth: Error applying setting, reverse things back
[ 1.760728] sunxi-gmac: probe of 4500000.eth failed with error -22
[ 1.767779] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.775069] sunxi-ehci: EHCI SUNXI driver
[ 1.779858] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.786768] sunxi-ohci: OHCI SUNXI driver
[ 1.791682] i2c /dev entries driver
[ 1.795642] sunxi cedar version 1.1
[ 1.799703] sunxi-cedar 1c0e000.ve: Adding to iommu group 0
[ 1.805953] VE: sunxi_cedar_probe power-domain init!!!
[ 1.811703] VE: install start!!!
[ 1.811703]
[ 1.817187] VE: cedar-ve the get irq is 45
[ 1.817187]
[ 1.823598] VE: ve_debug_proc_info:(ptrval), data:(ptrval), lock:(ptrval)
[ 1.823598]
[ 1.832826] VE: install end!!!
[ 1.832826]
[ 1.837869] VE: sunxi_cedar_probe
[ 1.841795] Bluetooth: HCI UART driver ver 2.3
[ 1.846744] Bluetooth: HCI UART protocol H4 registered
[ 1.852487] Bluetooth: HCI UART protocol BCSP registered
[ 1.858400] Bluetooth: XRadio Bluetooth LPM Mode Driver Ver 1.0.10
[ 1.865531] [XR_BT_LPM] bluesleep_probe: bt_wake polarity: 1
[ 1.871900] [XR_BT_LPM] bluesleep_probe: host_wake polarity: 1
[ 1.878409] [XR_BT_LPM] bluesleep_probe: wakeup source is disabled!
[ 1.878409]
[ 1.887050] [XR_BT_LPM] bluesleep_probe: uart_index(1)
[ 1.894814] sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.21 2021-11-18 10:02)
[ 1.904729] sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8
[ 1.910899] sunxi-mmc 4020000.sdmmc: No vmmc regulator found
[ 1.917202] sunxi-mmc 4020000.sdmmc: No vqmmc regulator found
[ 1.923618] sunxi-mmc 4020000.sdmmc: No vdmmc regulator found
[ 1.930031] sunxi-mmc 4020000.sdmmc: No vd33sw regulator found
[ 1.936525] sunxi-mmc 4020000.sdmmc: No vd18sw regulator found
[ 1.943033] sunxi-mmc 4020000.sdmmc: No vq33sw regulator found
[ 1.949539] sunxi-mmc 4020000.sdmmc: No vq18sw regulator found
[ 1.956480] sunxi-mmc 4020000.sdmmc: Got CD GPIO
[ 1.961892] sunxi-mmc 4020000.sdmmc: set cd-gpios as 24M fail
[ 1.968460] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.979561] sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator
[ 1.999654] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.024001] sunxi-mmc 4020000.sdmmc: detmode:gpio irq
[ 2.029682] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[ 2.041209] sun8iw20-pinctrl pio: pin PG4 already requested by 2501400.uart; cannot claim for 4021000.sdmmc
[ 2.052111] sun8iw20-pinctrl pio: pin-196 (4021000.sdmmc) status -22
[ 2.059210] sun8iw20-pinctrl pio: could not request pin 196 (PG4) from group PG4 on device pio
[ 2.068918] sunxi-mmc 4021000.sdmmc: Error applying setting, reverse things back
[ 2.077191] sunxi-mmc: probe of 4021000.sdmmc failed with error -22
[ 2.084952] exFAT: Version 1.3.0
[ 2.090596] sunxi-spdif 2036000.spdif: request pinctrl handle for audio failed
[ 2.098717] sunxi-spdif 2036000.spdif: [sunxi_spdif_dev_probe] failed
[ 2.105983] sunxi-spdif: probe of 2036000.spdif failed with error -22
[ 2.114296] [AUDIOCODEC][sunxi_codec_parse_params][2412]:digital_vol:0, lineout_vol:26, mic1gain:31, mic2gain:31 pa _msleep:120, pa_level:1, pa_pwr_level:1
[ 2.114296]
[ 2.131391] [AUDIOCODEC][sunxi_codec_parse_params][2448]:adcdrc_cfg:0, adchpf_cfg:1, dacdrc_cfg:0, dachpf:0
[ 2.142709] [AUDIOCODEC][sunxi_internal_codec_probe][2609]:codec probe finished
[ 2.151763] debugfs: Directory '203034c.dummy_cpudai' with parent 'audiocodec' already present!
[ 2.161530] [SNDCODEC][sunxi_card_init][583]:card init finished
[ 2.168648] sunxi-codec-machine 2030340.sound: 2030000.codec <-> 203034c.dummy_cpudai mapping ok
[ 2.179475] input: audiocodec sunxi Audio Jack as /devices/platform/soc@3000000/2030340.sound/sound/card0/input0
[ 2.191360] [SNDCODEC][sunxi_card_dev_probe][836]:register card finished
[ 2.199722] NET: Registered protocol family 10
[ 2.205741] Segment Routing with IPv6
[ 2.209879] [SNDCODEC][sunxi_hs_init_work][259]:resume-->report switch
[ 2.217241] NET: Registered protocol family 17
[ 2.222248] NET: Registered protocol family 15
[ 2.227351] Bluetooth: RFCOMM TTY layer initialized
[ 2.232818] Bluetooth: RFCOMM socket layer initialized
[ 2.238566] Bluetooth: RFCOMM ver 1.11
[ 2.243330] Registering SWP/SWPB emulation handler
[ 2.263155] sun8iw20-pinctrl pio: pin PE2 already requested by 2500800.uart; cannot claim for 4500000.eth
[ 2.273893] sun8iw20-pinctrl pio: pin-130 (4500000.eth) status -22
[ 2.280805] sun8iw20-pinctrl pio: could not request pin 130 (PE2) from group PE2 on device pio
[ 2.290520] sunxi-gmac 4500000.eth: Error applying setting, reverse things back
[ 2.298730] sunxi-gmac: probe of 4500000.eth failed with error -22
[ 2.306036] sun8iw20-pinctrl pio: pin PG4 already requested by 2501400.uart; cannot claim for 4021000.sdmmc
[ 2.316916] sun8iw20-pinctrl pio: pin-196 (4021000.sdmmc) status -22
[ 2.324014] sun8iw20-pinctrl pio: could not request pin 196 (PG4) from group PG4 on device pio
[ 2.333719] sunxi-mmc 4021000.sdmmc: Error applying setting, reverse things back
[ 2.341992] sunxi-mmc: probe of 4021000.sdmmc failed with error -22
[ 2.349470] sunxi-i2c sunxi-i2c2: sunxi-i2c2 supply twi not found, using dummy regulator
[ 2.359302] sunxi-i2c sunxi-i2c2: probe success
[ 2.365573] sunxi-spdif 2036000.spdif: request pinctrl handle for audio failed
[ 2.373663] sunxi-spdif 2036000.spdif: [sunxi_spdif_dev_probe] failed
[ 2.380943] sunxi-spdif: probe of 2036000.spdif failed with error -22
[ 2.389713] debugfs: Directory '2031000.dmic' with parent 'snddmic' already present!
[ 2.398901] sunxi-audio-card 2031060.sounddmic: dmic-hifi <-> 2031000.dmic mapping ok
[ 2.408812] get ehci0-controller wakeup-source is fail.
[ 2.414732] sunxi ehci0-controller don't init wakeup source
[ 2.420992] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xc0b5dfb0, 0x:c888b000, irq_no :3c
[ 2.432918] [sunxi-ehci0]: Not init ehci0
[ 2.437717] get ohci0-controller wakeup-source is fail.
[ 2.443666] sunxi ohci0-controller don't init wakeup source
[ 2.449890] [sunxi-ohci0]: probe, pdev->name: 4101400.ohci0-controller, sunxi_ohci: 0xc0b5e240
[ 2.459495] [sunxi-ohci0]: Not init ohci0
[ 2.464272] get ehci1-controller wakeup-source is fail.
[ 2.470186] sunxi ehci1-controller don't init wakeup source
[ 2.476399] [sunxi-ehci1]: probe, pdev->name: 4200000.ehci1-controller, sunxi_ehci: 0xc0b5e4d0, 0x:c8895000, irq_no :3e
[ 2.488557] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply hci not found, using dummy regulat or
[ 2.501881] sunxi-ehci 4200000.ehci1-controller: EHCI Host Controller
[ 2.509117] sunxi-ehci 4200000.ehci1-controller: new USB bus registered, assigned bus number 1
[ 2.518989] sunxi-ehci 4200000.ehci1-controller: irq 62, io mem 0x04200000
[ 2.548638] sunxi-ehci 4200000.ehci1-controller: USB 2.0 started, EHCI 1.00
[ 2.557196] hub 1-0:1.0: USB hub found
[ 2.561433] hub 1-0:1.0: 1 port detected
[ 2.566544] get ohci1-controller wakeup-source is fail.
[ 2.572508] sunxi ohci1-controller don't init wakeup source
[ 2.578736] [sunxi-ohci1]: probe, pdev->name: 4200400.ohci1-controller, sunxi_ohci: 0xc0b5e760
[ 2.588564] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply hci not found, using dummy regulat or
[ 2.600767] sunxi-ohci 4200400.ohci1-controller: OHCI Host Controller
[ 2.607979] sunxi-ohci 4200400.ohci1-controller: new USB bus registered, assigned bus number 2
[ 2.617830] sunxi-ohci 4200400.ohci1-controller: irq 63, io mem 0x04200400
[ 2.693425] hub 2-0:1.0: USB hub found
[ 2.697639] hub 2-0:1.0: 1 port detected
[ 2.703346] ubi0: attaching mtd3
[ 3.012959] random: crng init done
[ 3.058625] ubi0: scanning is finished
[ 3.074444] ubi0: attached mtd3 (name "sys", size 123 MiB)
[ 3.080600] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 258048 bytes
[ 3.088259] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 2048
[ 3.095835] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 3.103635] ubi0: good PEBs: 492, bad PEBs: 0, corrupted PEBs: 0
[ 3.110342] ubi0: user volume: 9, internal volumes: 1, max. volumes count: 128
[ 3.118390] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
[ 3.127702] ubi0: available PEBs: 0, total reserved PEBs: 492, PEBs reserved for bad PEB handling: 20
[ 3.137999] ubi0: background thread "ubi_bgt0d" started, PID 71
[ 3.145822] block ubiblock0_5: created from ubi0:5(rootfs)
[ 3.152475] sun8iw20-pinctrl pio: pin PB6 already requested by 2500c00.uart; cannot claim for pio:38
[ 3.162692] sun8iw20-pinctrl pio: pin-38 (pio:38) status -22
[ 3.171496] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 3.181165] cfg80211: failed to load regulatory.db
[ 3.181182] clk: Not disabling unused clocks
[ 3.191327] ALSA device list:
[ 3.194631] #0: audiocodec
[ 3.197835] #1: snddmic
[ 3.200769] alloc_fd: slot 0 not NULL!
[ 3.208674] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 3.218555] devtmpfs: mounted
[ 3.223787] Freeing unused kernel memory: 1024K
[ 3.238755] Run /pseudo_init as init process
mount: mounting none on /dev failed: Resource busy
[ 3.477065] UBIFS (ubi0:7): default file-system created
[ 3.483727] UBIFS (ubi0:7): Mounting in unauthenticated mode
[ 3.490194] UBIFS (ubi0:7): background thread "ubifs_bgt0_7" started, PID 101
[ 3.613795] UBIFS (ubi0:7): UBIFS: mounted UBI device 0, volume 7, name "rootfs_data"
[ 3.622605] UBIFS (ubi0:7): LEB size: 258048 bytes (252 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
[ 3.633669] UBIFS (ubi0:7): FS size: 3096576 bytes (2 MiB, 12 LEBs), journal size 1806337 bytes (1 MiB, 5 LEBs)
[ 3.644929] UBIFS (ubi0:7): reserved for root: 146258 bytes (142 KiB)
[ 3.652124] UBIFS (ubi0:7): media format: w5/r0 (latest is w5/r0), UUID 8D11C210-88A6-4DFA-88A9-752DF0718D0D, small LPT model
can't run '/etc/preinit': No such file or directory
mount: mounting proc on /proc failed: Resource busy
mount: mounting tmpfs on /run failed: No such file or directory
hostname: can't open '/etc/hostname': No such file or directory
------run rc.preboot file-----
[ 3.798004] UBIFS (ubi0:8): default file-system created
[ 3.804592] UBIFS (ubi0:8): Mounting in unauthenticated mode
[ 3.811084] UBIFS (ubi0:8): background thread "ubifs_bgt0_8" started, PID 130
[ 3.933458] UBIFS (ubi0:8): UBIFS: mounted UBI device 0, volume 8, name "UDISK"
[ 3.941655] UBIFS (ubi0:8): LEB size: 258048 bytes (252 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
[ 3.952740] UBIFS (ubi0:8): FS size: 47480832 bytes (45 MiB, 184 LEBs), journal size 2322432 bytes (2 MiB, 9 LEBs)
[ 3.964291] UBIFS (ubi0:8): reserved for root: 2242636 bytes (2190 KiB)
[ 3.971677] UBIFS (ubi0:8): media format: w5/r0 (latest is w5/r0), UUID DBD07D8B-3FAB-4B48-8C04-30CC419EEC01, small LPT model
------run rc.modules file-----
[ 4.059097] usbcore: registered new interface driver usb-storage
[ 4.069961] sunxi_gpadc_init,2151, success
[ 4.074842] sunxi_gpadc_setup: get channel scan data failed
[ 4.081382] input: sunxi-gpadc0 as /devices/virtual/input/input1
[ 4.093429] get ctp_power is fail, -22
[ 4.097612] get ctp_power_ldo_vol is fail, -22
[ 4.103682] sunxi_ctp_startup: ctp_power_io is invalid.
[ 4.109566] get ctp_gesture_wakeup fail, no gesture wakeup
[ 4.115696] gt9xxnew_ts 2-0014: 2-0014 supply ctp not found, using dummy regulator
[ 4.288748] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 4.296821] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 4.304515] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 4.312586] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 4.320275] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 4.328338] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 4.336025] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 4.344093] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 4.351782] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 4.359839] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 4.367402] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -22! Process reset.
[ 4.528616] <<-GTP-ERROR->> GTP i2c test failed time 1.
[ 4.558726] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 4.566788] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 4.574473] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 4.582541] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 4.590229] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 4.598294] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 4.605982] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 4.614050] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 4.621740] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 4.629807] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 4.637371] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -22! Process reset.
[ 4.798616] <<-GTP-ERROR->> GTP i2c test failed time 2.
[ 4.828725] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 4.836788] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 4.844477] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 4.852542] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 4.860229] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 4.868291] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 4.875980] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 4.884048] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 4.891738] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 4.899805] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 4.907369] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -22! Process reset.
[ 5.068617] <<-GTP-ERROR->> GTP i2c test failed time 3.
[ 5.098744] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 5.106806] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 5.114495] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 5.122560] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 5.130246] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 5.138308] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 5.145994] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 5.154059] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 5.161746] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 5.169813] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 5.177376] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -22! Process reset.
[ 5.338616] <<-GTP-ERROR->> GTP i2c test failed time 4.
[ 5.368726] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 5.376791] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 5.384478] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 5.392544] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 5.400233] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 5.408299] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 5.415984] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 5.424051] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 5.431739] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 5.439807] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 5.447370] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -22! Process reset.
[ 5.608616] <<-GTP-ERROR->> GTP i2c test failed time 5.
[ 5.638612] I2C communication ERROR!
[ 5.638637] regulator-dummy: Underflow of regulator enable count
[ 5.649482] gt9xxnew_ts: probe of 2-0014 failed with error -1
[ 5.731426] Error: Driver 'gt9xxnew_ts' is already registered, aborting...
insmod: can't insert '/lib/modules/5.4.61/gt9xxnew_ts.ko': Operation not permitted
[ 5.904385] ======== XRADIO WIFI OPEN ========
[ 5.909888] [XRADIO] Driver Label:XR_V02.16.85_P2P_HT40_01.31
[ 5.916622] [XRADIO] Allocated hw_priv @ a572fcc6
[ 5.921890] [ADDR_MGT] get_addr_by_name: t->addr:
[ 5.927783] sunxi-rfkill soc@3000000:rfkill@0: bus_index: 1
[ 5.944065] sunxi-rfkill soc@3000000:rfkill@0: wlan power on success
[ 6.151171] sunxi_hosts[1] should not be null
[ 6.151176] [XRADIO] Detect SDIO card 1
[ 8.218691] sunxi-rfkill soc@3000000:rfkill@0: wlan power off success
[ 8.325876] sunxi_hosts[1] should not be null
[ 8.325880] [XRADIO] Remove SDIO card 1
[ 8.345009] [SBUS_ERR] sdio probe timeout!
[ 8.349583] [XRADIO_ERR] sbus_sdio_init failed
[ 8.354784] xradio_core_init failed (-110)!
[ 8.497164] ======== XRADIO WIFI OPEN ========
[ 8.502727] [XRADIO] Driver Label:XR_V02.16.85_P2P_HT40_01.31
[ 8.509495] [XRADIO] Allocated hw_priv @ 9fa7ba29
[ 8.514736] [ADDR_MGT] get_addr_by_name: t->addr:
[ 8.520658] sunxi-rfkill soc@3000000:rfkill@0: bus_index: 1
[ 8.536900] sunxi-rfkill soc@3000000:rfkill@0: wlan power on success
[ 8.744021] sunxi_hosts[1] should not be null
[ 8.744026] [XRADIO] Detect SDIO card 1
[ 10.778683] sunxi-rfkill soc@3000000:rfkill@0: wlan power off success
[ 10.885866] sunxi_hosts[1] should not be null
[ 10.885870] [XRADIO] Remove SDIO card 1
[ 10.905004] [SBUS_ERR] sdio probe timeout!
[ 10.909577] [XRADIO_ERR] sbus_sdio_init failed
[ 10.914793] xradio_core_init failed (-110)!
insmod: can't insert '/lib/modules/5.4.61/xr829.ko': Operation timed out
Successfully initialized wpa_supplicant
Could not read interface wlan0 flags: No such device
nl80211: Driver does not support authentication/association or connect commands
nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Could not read interface wlan0 flags: No such device
wlan0: Failed to initialize driver interface
------run rc.final file-----
numid=30,iface=MIXER,name='Headphone Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
BusyBox v1.27.2 () built-in shell (ash)
------run profile file-----
_____ _ __ _
|_ _||_| ___ _ _ | | |_| ___ _ _ _ _
| | _ | || | | |__ | || || | ||_'_|
| | | || | || _ | |_____||_||_|_||___||_,_|
|_| |_||_|_||_|_| Tina is Based on OpenWrt!
----------------------------------------------
Tina Linux (Neptune, 61CC0487)
----------------------------------------------
Mon Feb 6 00:00:00 GMT 2023
nodev debugfs
root@TinaLinux:/# [ 11.425821] file system registered
[ 11.443206] configfs-gadget 4100000.udc-controller: failed to start g1: -19
sh: write error: No such device
[ 12.538895] sunxi_usb_udc 4100000.udc-controller: 4100000.udc-controller supply udc not found, using dummy regulato r
[ 12.554635] read descriptors
[ 12.557861] read strings
[ 12.801718] android_work: sent uevent USB_STATE=CONNECTED
[ 13.058640] android_work: sent uevent USB_STATE=DISCONNECTED
[ 13.073446] android_work: sent uevent USB_STATE=CONNECTED
[ 13.079892] configfs-gadget gadget: high-speed config #1: c
[ 13.086166] android_work: sent uevent USB_STATE=CONFIGURED#14 Re: 全志 SOC » adb提示No space left on device » 2024-03-15 08:37:57
海石生风 说：
你的rootfs的格式应该是romfs之类没有写入功能的文件系统，要更换带有写入功能的文件系统
之前的使用的格式好像是squashfs，然后我使用menuconfig增加了以下下两个配置，想着这样是不是可以增大rootfs的空间。
local
->Target Images
->[*] ext4
->(80) Root filesystem partition size (in MB)不过当我修改好配置，重新编译打包后，使用板子的nand启动时，终端提示
[ 3.286362] No filesystem could mount root, tried:
[ 3.286364] squashfs
[ 3.296004] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(254,0)然后我将uboot中的rootfstype变量从squashfs改为ext4，再次启动，终端提示
[ 3.206709] VFS: Cannot open root device "ubiblock0_5" or unknown-block(254,0): error -19
[ 3.215884] Please append a correct "root=" boot option; here are the available partitions:
[ 3.225262] 1f00 1024 mtdblock0
[ 3.225265] (driver?)
[ 3.232586] 1f01 3072 mtdblock1
[ 3.232589] (driver?)
[ 3.239905] 1f02 1024 mtdblock2
[ 3.239907] (driver?)
[ 3.247206] 1f03 125952 mtdblock3
[ 3.247209] (driver?)
[ 3.254520] fe00 82152 ubiblock0_5
[ 3.254522] (driver?)
[ 3.262020] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(254,0)不知道修改这种配置的方法可以不可真的增加rootfs的空间，如果可以的话，那这个问题又该怎么解决呢？
#15 Re: 全志 SOC » adb提示No space left on device » 2024-03-14 16:25:41
#16 Re: 全志 SOC » 怎么单独编译uboot，kernel，dts，rootfs » 2024-03-14 13:17:01
#17 Re: 全志 SOC » adb提示No space left on device » 2024-03-14 13:15:36
#18 Re: 全志 SOC » adb提示No space left on device » 2024-03-14 11:00:04
板子上的/var下面没有log文件夹，不知道从哪里看 
这是sd启动的时候
adb失败
C:\Users\76455>adb push E:\Projects\Cpro\libc.so.6 /lib
adb: error: failed to copy 'E:\Projects\Cpro\libc.so.6' to '/lib/libc.so.6': remote Read-only file system
E:\Projects\Cpro\libc.so.6: 0 files pushed. 3.2 MB/s (65536 bytes in 0.020s)当我在板子上除了tmp目录的其他目录下进行写操作的时候也会提示系统只读
root@TinaLinux:/lib# mkdir 111
mkdir: can't create directory '111': Read-only file system\下面是我使用flash启动的时候
使用adb push的时候，第一文件成功了，第二个文件提示remote No space left on device
C:\Users\76455>adb push E:\Projects\Cpro\libc.so.6 /lib
E:\Projects\Cpro\libc.so.6: 1 file pushed. 2.0 MB/s (1417908 bytes in 0.670s)
C:\Users\76455>adb push E:\Projects\Cpro\libgcc_s.so.1 /lib
adb: error: failed to copy 'E:\Projects\Cpro\libgcc_s.so.1' to '/lib/libgcc_s.so.1': remote No space left on device
E:\Projects\Cpro\libgcc_s.so.1: 0 files pushed. 0.9 MB/s (441960 bytes in 0.480s)此时我在对板子上的文件进行写操作的时候也会提示No space left on device
root@TinaLinux:/lib# mkdir 111
mkdir: can't create directory '111': No space left on device#19 Re: 全志 SOC » adb提示No space left on device » 2024-03-14 10:03:28
），使用mboot和mkernel在使用pack命令编译出来的镜像烧写的板子上总是报错。#21 全志 SOC » adb提示No space left on device » 2024-03-14 08:42:06
- 子非鱼
- 回复： 31
本人新手，使用的是T113的芯片，当我使用adb向板子传文件的adb提示remote No space left on device。
下面是我使用flash启动的的分区状况
Filesystem Size Used Available Use% Mounted on
/dev/root 35.5M 35.5M 0 100% /rom
devtmpfs 53.0M 0 53.0M 0% /dev
tmpfs 57.5M 0 57.5M 0% /tmp
/dev/by-name/rootfs_data
1.4M 24.0K 1.2M 2% /overlay
overlayfs:/overlay 1.4M 24.0K 1.2M 2% /
/dev/ubi0_8 31.7M 24.0K 30.0M 0% /mnt/UDISK当我使用sd卡启动的时候分区如下，并且使用sd启动的话，系统是只读的，不能写入
Filesystem Size Used Available Use% Mounted on
/dev/root 35.5M 35.5M 0 100% /
devtmpfs 53.0M 0 53.0M 0% /dev
tmpfs 57.5M 0 57.5M 0% /tmp请问有没有什么解决方法？
感谢为中文互联网持续输出优质内容的各位老铁们。
QQ: 516333132, 微信(wechat): whycan_cn (哇酷网/挖坑网/填坑网) service@whycan.cn