您尚未登录。

#1 Re: 全志 SOC » St7710s rgb + spi 显示不正常 » 2024-07-19 20:36:33

DE: 89KHz
VSYNC 52Hz
HSYNC 91Khz
CLK 48MHz
时序一切都正常

#2 Re: 全志 SOC » St7710s rgb + spi 显示不正常 » 2024-07-15 18:36:45

480*854的屏幕
垂直分辨率和时序从854调小为480,出现更多重复画面
wx_camera_1721038062520.jpg
调到854的两倍1708,可以塞满整个屏幕,但肯定是扁的,画面还在不停的闪(背光没问题)
IMG_20240715_182236.jpg
根据上面的结果,有一半的hsync根本没有起作用

#3 Re: 全志 SOC » St7710s rgb + spi 显示不正常 » 2024-07-15 12:50:56

soso 说:

极性问题应该,有个是信号极性反了。具体可以问卖屏的~

调整了clk的相位,之前图片会有点色彩错误就解决了,但还是显示两个压扁的图像

#4 全志 SOC » St7710s rgb + spi 显示不正常 » 2024-07-14 23:33:02

Haronyx
回复: 5

如图
IMG_20240714_231250.jpg
是我初始化的有问题,还是显示时序有问题

#5 Re: 全志 SOC » A133 Android 无法打开WiFi » 2024-04-05 12:26:32

@memory
我这里显示已经创建了啊
[  624.223263] init: Created socket '/dev/socket/wpa_wlan0', mode 660, user 1010, group 1010

除了[  625.681133] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready什么也没有打印

#6 全志 SOC » A133 Android 无法打开WiFi » 2024-04-03 23:01:53

Haronyx
回复: 2

如题

[  623.676410] RTW: module init start
[  623.680515] RTW: rtl8723bs-vq0 v5.2.17_26088.20180202_COEX20171212-6e51_GTS
[  623.688959] RTW: build time: Apr  3 2024 21:08:33
[  623.694636] RTW: rtl8723bs-vq0 BT-Coex version = COEX20171212-6e51
[  623.701803] sunxi-wlan soc@03000000:wlan@0: bus_index: 1
[  623.809887] RTW: == SDIO Card Info ==
[  623.814018] RTW:   clock: 50000000 Hz
[  623.818181] RTW:   timing spec :sd high-speed
[  623.823118] RTW:   sd3_bus_mode: FALSE
[  623.827328] RTW: ================
[  623.866191] RTW: 0x000: 29 81 03 7C 51 08 28 00    62 07 0D 45 10 00 00 00
[  623.874051] RTW: 0x010: 2D 2C 2C 2D 2D 2D 31 31    30 31 31 00 FF FF FF FF
[  623.881989] RTW: 0x020: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
[  623.889837] RTW: 0x030: FF FF FF FF FF FF FF FF    FF FF 28 28 28 28 28 28
[  623.897662] RTW: 0x040: 28 28 28 28 28 00 FF FF    FF FF FF FF FF FF FF FF
[  623.905488] RTW: 0x050: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
[  623.913317] RTW: 0x060: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
[  623.921130] RTW: 0x070: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
[  623.928980] RTW: 0x080: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
[  623.936836] RTW: 0x090: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
[  623.944659] RTW: 0x0a0: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
[  623.952482] RTW: 0x0b0: FF FF FF FF FF FF FF FF    20 3F 1F 00 00 00 FF FF
[  623.960310] RTW: 0x0c0: FF 29 20 11 00 00 00 FF    00 FF 12 FF FF FF FF FF
[  623.968161] RTW: 0x0d0: 3E 10 01 02 23 00 00 FF    20 04 4C 02 23 B7 21 02
[  623.976008] RTW: 0x0e0: 0C 00 22 04 00 08 00 32    FF 21 02 0C 00 22 2A 01
[  623.983839] RTW: 0x0f0: 01 00 00 00 00 00 00 00    00 00 00 00 02 00 FF FF
[  623.991656] RTW: 0x100: 00 00 00 00 00 00 00 00    00 00 00 00 00 00 00 00
[  623.999509] RTW: 0x110: 00 EB 00 6E 01 00 00 00    00 FF 0C CF 89 32 C5 6E
[  624.007335] RTW: 0x120: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
[  624.015149] RTW: 0x130: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
[  624.022980] RTW: 0x140: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
[  624.030820] RTW: 0x150: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
[  624.038614] RTW: 0x160: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
[  624.046476] RTW: 0x170: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
[  624.054302] RTW: 0x180: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
[  624.062092] RTW: 0x190: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
[  624.069909] RTW: 0x1a0: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
[  624.077743] RTW: 0x1b0: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
[  624.085564] RTW: 0x1c0: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
[  624.093415] RTW: 0x1d0: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
[  624.101372] RTW: 0x1e0: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
[  624.109216] RTW: 0x1f0: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
[  624.117039]
[  624.118848] RTW: hal_com_config_channel_plan chplan:0x20
[  624.127099] RTW: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1
[  624.139404] RTW: rtw_ndev_init(wlan0) if1 mac_addr=60:3e:36:59:d8:f2
[  624.156289] RTW: rtw_ndev_init(p2p0) if2 mac_addr=62:3e:36:59:d8:f2
[  624.171480] RTW: module init ret=0
[  624.185884] init: Received control message 'interface_start' for 'android.hardware.wifi.supplicant@1.0::ISupplicant/default' from pid: 1596 (/system/bin/hwservicemanager)
[  624.211916] init: starting service 'wpa_supplicant'...
[  624.223263] init: Created socket '/dev/socket/wpa_wlan0', mode 660, user 1010, group 1010
[  625.663870] RTW: wlan0- hw port(0) mac_addr =60:3e:36:59:d8:f2
[  625.670522] RTW: p2p0- hw port(1) mac_addr =62:3e:36:59:d8:f2

[  625.681133] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

[  625.785079] RTW: module exit start
[  625.822536] RTW: rtw_ndev_uninit(wlan0) if1
[  625.838447] init: Service 'wpa_supplicant' (pid 23393) exited with status 0
[  625.846374] init: Sending signal 9 to service 'wpa_supplicant' (pid 23393) process group...
[  625.856272] libprocessgroup: Successfully killed process cgroup uid 0 pid 23393 in 0ms
[  625.932411] RTW: rtw_ndev_uninit(p2p0) if2
[  626.006881] RTW: rtw_sdio_primary_adapter_deinit wowlan_mode:0
[  626.013589] RTW: rtw_dev_unload: driver not in IPS
[  626.028258] sunxi-wlan soc@03000000:wlan@0: bus_index: 1
[  626.148871] RTW: module exit success

前面看上去已经识别到WIFI模块,但到了[  625.681133] 就显示这个

[  625.681133] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

然后就开始卸载模组了。这是为什么?

#7 Re: 全志 SOC » 求助A133 Android 编译问题 » 2024-03-31 23:27:47

找到原因了,没有把之前的clean掉,现在正常了

#8 全志 SOC » 求助A133 Android 编译问题 » 2024-03-31 16:35:32

Haronyx
回复: 2

编译A133 Android10 时更改了编译选项,改成编译64位的Android。但是每隔一到两分钟就会出现这个错误

layla@layla:~/Documents/A133/android$ make -j8
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=10
TARGET_PRODUCT=ceres_c3
TARGET_BUILD_VARIANT=eng
TARGET_BUILD_TYPE=release
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv8-a
TARGET_2ND_CPU_VARIANT=generic
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-6.5.0-26-generic-x86_64-Ubuntu-22.04.2-LTS
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=QP1A.191105.004
OUT_DIR=out
============================================
[  4% 1/25] //frameworks/compile/libbcc/bcinfo:libbcinfo header-abi-linker libbcinfo.so.lsdump
FAILED: out/soong/.intermediates/frameworks/compile/libbcc/bcinfo/libbcinfo/android_arm64_armv8-a_vendor_shared/libbcinfo.so.lsdump
prebuilts/clang-tools/linux-x86/bin/header-abi-linker -o out/soong/.intermediates/frameworks/compile/libbcc/bcinfo/libbcinfo/android_arm64_armv8-a_vendor_shared/libbcinfo.so.lsdump -so out/soong/.intermediates/frameworks/compile/libbcc/bcinfo/libbcinfo/android_arm64_armv8-a_vendor_shared/libbcinfo.so -arch arm64  -Iframeworks/compile/libbcc/bcinfo/include @out/soong/.intermediates/frameworks/compile/libbcc/bcinfo/libbcinfo/android_arm64_armv8-a_vendor_shared/libbcinfo.so.lsdump.rsp 
Failed to parse JSON: * Line 1, Column 1
  Syntax error: value, object or array expected.

ReadDump failed
[  8% 2/25] //frameworks/compile/libbcc/bcinfo:libbcinfo header-abi-linker libbcinfo.so.lsdump [arm]
FAILED: out/soong/.intermediates/frameworks/compile/libbcc/bcinfo/libbcinfo/android_arm_armv8-a_vendor_shared/libbcinfo.so.lsdump
prebuilts/clang-tools/linux-x86/bin/header-abi-linker -o out/soong/.intermediates/frameworks/compile/libbcc/bcinfo/libbcinfo/android_arm_armv8-a_vendor_shared/libbcinfo.so.lsdump -so out/soong/.intermediates/frameworks/compile/libbcc/bcinfo/libbcinfo/android_arm_armv8-a_vendor_shared/libbcinfo.so -arch arm  -Iframeworks/compile/libbcc/bcinfo/include @out/soong/.intermediates/frameworks/compile/libbcc/bcinfo/libbcinfo/android_arm_armv8-a_vendor_shared/libbcinfo.so.lsdump.rsp 
Failed to parse JSON: * Line 1, Column 1
  Syntax error: value, object or array expected.

ReadDump failed
16:25:04 ninja failed with: exit status 1

#### failed to build some targets (01:20 (mm:ss)) ####

此时继续make -j8编译就会恢复正常,然后过了大约一分半钟又会出现这种情况。
目前到了最后[  4% 1/25]就完全编译不了了,求助各位网友!!该怎么解决

页脚

工信部备案:粤ICP备20025096号 Powered by FluxBB

感谢为中文互联网持续输出优质内容的各位老铁们。 QQ: 516333132, 微信(wechat): whycan_cn (哇酷网/挖坑网/填坑网) service@whycan.cn