页次： 1
用的晕哥的 USB固件
应该识别的NAND 但是无法建立U盘？芯片是新的呢，为啥看起来是坏的？进不去，求救。
[ 0.916204] spi-nand spi0.0: GigaDevice SPI NAND was found.
[ 0.921870] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
上面应该是识别了的？
[ 0.117175] CPU: Virtualization extensions available.
[ 0.123321] devtmpfs: initialized
[ 0.130219] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.138259] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.148134] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.154452] pinctrl core: initialized pinctrl subsystem
[ 0.160972] NET: Registered protocol family 16
[ 0.165936] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.174074] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.182076] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.204379] SCSI subsystem initialized
[ 0.208958] usbcore: registered new interface driver usbfs
[ 0.214501] usbcore: registered new interface driver hub
[ 0.220019] usbcore: registered new device driver usb
[ 0.225315] media: Linux media interface: v0.10
[ 0.229932] videodev: Linux video capture interface: v2.00
[ 0.235498] pps_core: LinuxPPS API ver. 1 registered
[ 0.240485] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.249623] PTP clock support registered
[ 0.253833] Advanced Linux Sound Architecture Driver Initialized.
[ 0.261317] clocksource: Switched to clocksource arch_sys_counter
[ 0.278869] NET: Registered protocol family 2
[ 0.283974] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.291719] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.298689] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.305076] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.311591] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.317460] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.323994] NET: Registered protocol family 1
[ 0.329372] RPC: Registered named UNIX socket transport module.
[ 0.335408] RPC: Registered udp transport module.
[ 0.340105] RPC: Registered tcp transport module.
[ 0.344829] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.351702] Unpacking initramfs...
[ 0.531478] Freeing initrd memory: 2052K
[ 0.537296] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[ 0.551826] NFS: Registering the id_resolver key type
[ 0.556918] Key type id_resolver registered
[ 0.561095] Key type id_legacy registered
[ 0.565228] jffs2: version 2.2. (NAND) 漏 2001-2006 Red Hat, Inc.
[ 0.651726] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.659127] io scheduler mq-deadline registered
[ 0.663747] io scheduler kyber registered
[ 0.668736] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
[ 0.679033] sun8i-v3s-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 0.756693] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.765597] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pb not found, using dummy regulator
[ 0.776671] printk: console [ttyS0] disabled
[ 0.801196] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 36, base_baud = 1500000) is a U6_16550A
[ 0.810237] printk: console [ttyS0] enabled
[ 0.810237] printk: console [ttyS0] enabled
[ 0.818613] printk: bootconsole [earlycon0] disabled
[ 0.818613] printk: bootconsole [earlycon0] disabled
[ 0.829188] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pe not found, using dummy regulator
[ 0.860521] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 37, base_baud = 1500000) is a U6_16550A
[ 0.891213] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 38, base_baud = 1500000) is a U6_16550A
[ 0.904677] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pc not found, using dummy regulator
[ 0.916204] spi-nand spi0.0: GigaDevice SPI NAND was found.
[ 0.921870] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
[ 0.932904] libphy: Fixed MDIO Bus: probed
[ 0.937018] CAN device driver interface
[ 0.941631] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
[ 0.947432] dwmac-sun8i 1c30000.ethernet: No regulator found
[ 0.953703] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
[ 0.960934] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
[ 0.968220] dwmac-sun8i 1c30000.ethernet: COE Type 2
[ 0.973204] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
[ 0.979984] dwmac-sun8i 1c30000.ethernet: Normal descriptors
[ 0.985650] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
[ 0.998647] libphy: stmmac: probed
[ 1.002765] dwmac-sun8i 1c30000.ethernet: Cannot get mdio-mux node
[ 1.009355] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.015969] ehci-platform: EHCI generic platform driver
[ 1.021522] ehci-platform 1c1a000.usb: EHCI Host Controller
[ 1.027148] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
[ 1.035140] ehci-platform 1c1a000.usb: irq 26, io mem 0x01c1a000
[ 1.061344] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[ 1.068588] hub 1-0:1.0: USB hub found
[ 1.072541] hub 1-0:1.0: 1 port detected
[ 1.077154] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.083477] ohci-platform: OHCI generic platform driver
[ 1.089026] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[ 1.095770] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
[ 1.103753] ohci-platform 1c1a400.usb: irq 27, io mem 0x01c1a400
[ 1.176366] hub 2-0:1.0: USB hub found
[ 1.180199] hub 2-0:1.0: 1 port detected
[ 1.186968] input: 1c22800.lradc as /devices/platform/soc/1c22800.lradc/input/input0
[ 1.196244] sun6i-rtc 1c20400.rtc: registered as rtc0
[ 1.201415] sun6i-rtc 1c20400.rtc: RTC enabled
[ 1.206162] i2c /dev entries driver
[ 1.211862] usbcore: registered new interface driver em28xx
[ 1.217446] em28xx: Registered (Em28xx v4l2 Extension) extension
[ 1.223510] em28xx: Registered (Em28xx Input Extension) extension
[ 1.230616] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 1.239306] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pf not found, using dummy regulator
[ 1.275810] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
[ 1.283108] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pg not found, using dummy regulator
[ 1.319924] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB
[ 1.328040] usbcore: registered new interface driver usbhid
[ 1.333718] usbhid: USB HID core driver
[ 1.339504] sun4i-codec 1c22c00.codec: ASoC: codec-analog@01c23000 not registered
[ 1.347136] sun4i-codec 1c22c00.codec: Failed to register our card
[ 1.354656] NET: Registered protocol family 17
[ 1.359135] can: controller area network core (rev 20170425 abi 9)
[ 1.365546] NET: Registered protocol family 29
[ 1.369995] can: raw protocol (rev 20170425)
[ 1.374326] can: broadcast manager protocol (rev 20170425 t)
[ 1.379991] can: netlink gateway (rev 20170425) max_hops=1
[ 1.385827] Key type dns_resolver registered
[ 1.390283] Registering SWP/SWPB emulation handler
[ 1.402795] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator
[ 1.414267] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 1.420031] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 3
[ 1.429160] hub 3-0:1.0: USB hub found
[ 1.433244] hub 3-0:1.0: 1 port detected
[ 1.441224] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
[ 1.450058] gtp: GTP module loaded (pdp ctx size 64 bytes)
[ 1.455746] sun6i-rtc 1c20400.rtc: setting system clock to 1970-01-01T00:24:22 UTC (1462)
[ 1.464212] vcc5v0: disabling
[ 1.467187] ALSA device list:
[ 1.470150] #0: V3s Audio Codec
[ 1.475639] Freeing unused kernel memory: 1024K
[ 1.501473] Run /linuxrc as init process
can't open /dev/null: No such file or directory
can't open /dev/null: No such file or directory
can't open /dev/null: No such file or directory
can't open /dev/null: No such file or directory
Starting syslogd: OK
Starting klogd: OK
Starting mdev...
Initializing random number generator... [ 2.997418] random: dd: uninitialized urandom read (512 bytes read)
done.
Starting network: OK
[ 3.086353] Mass Storage Function, version: 2009/09/11
[ 3.091674] LUN: removable file: (no medium)
[ 3.096168] LUN: removable file: /dev/mtdblock0
[ 3.100701] Number of LUNs=1
[ 3.142420] g_mass_storage gadget: Mass Storage Gadget, version: 2009/09/11
[ 3.149398] g_mass_storage gadget: userspace failed to provide iSerialNumber
[ 3.156573] g_mass_storage gadget: g_mass_storage ready
Welcome to Buildroot
buildroot login: [ 3.438751] g_mass_storage gadget: high-speed config #1: Linux File-Backed Storage
[ 4.404081] random: fast init done
[ 4.407902] print_req_error: I/O error, dev mtdblock0, sector 0 flags 80700
[ 4.416252] print_req_error: I/O error, dev mtdblock0, sector 8 flags 80700
[ 4.423913] print_req_error: I/O error, dev mtdblock0, sector 16 flags 80700
[ 4.431829] print_req_error: I/O error, dev mtdblock0, sector 24 flags 80700
[ 4.440014] print_req_error: I/O error, dev mtdblock0, sector 0 flags 0
[ 4.446754] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 4.574042] print_req_error: I/O error, dev mtdblock0, sector 0 flags 0
[ 4.580672] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 4.823091] print_req_error: I/O error, dev mtdblock0, sector 0 flags 0
[ 4.829724] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 4.953173] print_req_error: I/O error, dev mtdblock0, sector 0 flags 0
页次： 1