WhyCan Forum(哇酷开发者社区)

TSLIB_TSEVENTTYPE=INPUT TSLIB_TSDEVICE=/dev/input/event1 TSLIB_CALIBFILE=/etc/pointercal TSLIB_CONFFILE=/etc/ts.conf TSLIB_PLUGINDIR=/usr/lib/ts TSLIB_FBDEVICE=/dev/fb0 TSLIB_CONSOLEDEVICE=none ts_calibrate

TSLIB_TSEVENTTYPE=INPUT TSLIB_TSDEVICE=/dev/input/event1 TSLIB_CALIBFILE=/etc/pointercal TSLIB_CONFFILE=/etc/ts.conf TSLIB_PLUGINDIR=/usr/lib/ts TSLIB_FBDEVICE=/dev/fb0 TSLIB_CONSOLEDEVICE=none ts_test

TSLIB_CALIBFILE=/etc/pointercal TSLIB_CONFFILE=/etc/ts.conf TSLIB_TSDEVICE=/dev/input/event1 /usr/bin/GUIDemo

#! /bin/sh
modprobe g_ffs idVendor=0x18d1 idProduct=0x4e42 iSerialNumber="buildroot"
mkdir -p /dev/usb-ffs/adb
mount -t functionfs adb /dev/usb-ffs/adb -o uid=2000,gid=2000
adbd &

var=$(cat /sys/class/net/eth0/carrier)
var1="0"
SLEEPTIME=1
while :;do
var=$(cat /sys/class/net/eth0/carrier)
if [ "$var" == "1" ];then
if [ "$var" != "$var1" ];then
touch /tmp/netok 
echo "network change  ok "
busybox udhcpc -s /etc/init.d/udhcpc.script &
fi
var1=$var
elif [ "$var" == "0" ];then
var=$(cat /sys/class/net/wlan0/carrier)
if [ "$var" == "1" ];then
if [ "$var" != "$var1" ];then
echo "wifi change ok "
touch /tmp/netok 
busybox udhcpc -s /etc/init.d/udhcpc.script &
fi
elif [ "$var" == "0" ];then

if [  -f "/tmp/netok" ]; then
echo "eth and wifi all NG "
rm -rf /tmp/netok 
fi
fi
var1=$var
fi

#echo "At `date +'%F %T'` "

sleep $SLEEPTIME
done

#!/bin/sh

modprobe r8723bs
sleep 0

modprobe esp8089.ko config=crystal_26M_en=1
sleep 2


ifconfig wlan0 192.168.10.1 netmask 255.255.255.0 up

dnsmasq -i wlan0 --dhcp-range=192.168.10.100,192.168.10.109,2h

hostapd /etc/hostapd.conf &

#wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf -B

import sys

from PyQt5 import QtCore, QtGui, QtWidgets

class Console(QtWidgets.QWidget):
    errorSignal = QtCore.pyqtSignal(str) 
    outputSignal = QtCore.pyqtSignal(str)
    def __init__(self):
        super().__init__()
        self.editor = QtWidgets.QPlainTextEdit(self)
        self.editor.setReadOnly(True)
        self.font = QtGui.QFont()
        # self.font.setFamily(editor["editorFont"])
        self.font.setPointSize(12)
        self.layout = QtWidgets.QVBoxLayout()
        self.layout.addWidget(self.editor, 1)
        self.setLayout(self.layout)
        self.output = None
        self.error = None
        self.editor.setFont(self.font)
        self.process = QtCore.QProcess()
        self.process.readyReadStandardError.connect(self.onReadyReadStandardError)
        self.process.readyReadStandardOutput.connect(self.onReadyReadStandardOutput)

    def onReadyReadStandardError(self):
        error = self.process.readAllStandardError().data().decode()
        self.editor.appendPlainText(error)
        self.errorSignal.emit(error)

    def onReadyReadStandardOutput(self):
        result = self.process.readAllStandardOutput().data().decode()
        self.editor.appendPlainText(result)
        self.outputSignal.emit(result)


    def run(self, command):
        """Executes a system command."""
        # clear previous text
        self.editor.clear()
        self.process.start(command)


if __name__ == '__main__':
    app = QtWidgets.QApplication(sys.argv)
    w = Console()
    w.show()
    w.errorSignal.connect(lambda error: print(error))
    w.outputSignal.connect(lambda output: print(output))
    w.run("ping 8.8.8.8 -c 100")
    sys.exit(app.exec_())

U-Boot 2017.01-rc2 (Sep 21 2024 - 13:55:52 +0800) Allwinner Technology

CPU:   Allwinner V3s (SUN8I 1681)
Model: Lichee Pi Zero
DRAM:  64 MiB
MMC:   SUNXI SD/MMC: 0
SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB
*** Warning - bad CRC, using default environment

Setting up a 800x480 lcd console (overscan 0x0)
dotclock: 33000kHz = 33000kHz: (1 * 3MHz * 66) / 6
In:    serial@01c28000
Out:   serial@01c28000
Err:   serial@01c28000
Net:   No ethernet found.
starting USB...
No controllers found
Hit any key to stop autoboot:  0
SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB
device 0 offset 0x100000, size 0x10000
SF: 65536 bytes @ 0x100000 Read: OK
device 0 offset 0x110000, size 0x400000
SF: 4194304 bytes @ 0x110000 Read: OK
## Flattened Device Tree blob at 41800000
   Booting using the fdt blob at 0x41800000
   Loading Device Tree to 42dfa000, end 42dfffc5 ... OK

Starting kernel ...