您尚未登录。

楼主 #1 2017-11-11 17:11:58

daydayup
会员
注册时间: 2017-10-09
已发帖子: 343
积分: 343

Allwinner全志V3s板子用ns2009驱动电阻触摸屏,在荔枝派zero工作好好的软件,我的板子出这个错误:

Allwinner全志V3s板子用ns2009驱动电阻触摸屏,在荔枝派zero工作好好的软件,我的板子出这个错误:

[   13.046734] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[   13.053285] input input1: Poll touch data failed: -110
[   15.206667] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[   15.213230] input input1: Poll touch data failed: -110
[   17.366664] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[   17.373225] input input1: Poll touch data failed: -110
[   19.526660] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[   19.533223] input input1: Poll touch data failed: -110
[   21.686660] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[   21.693220] input input1: Poll touch data failed: -110
[   23.846663] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[   23.853220] input input1: Poll touch data failed: -110

离线

#2 2017-11-14 14:19:34

沉鱼
管理员
注册时间: 2017-09-06
已发帖子: 161
积分: 161

Re: Allwinner全志V3s板子用ns2009驱动电阻触摸屏,在荔枝派zero工作好好的软件,我的板子出这个错误:

硬件与荔枝派zero 一样?
I2C SCK/SDA 有没有上拉?

离线

楼主 #3 2017-11-14 14:22:19

daydayup
会员
注册时间: 2017-10-09
已发帖子: 343
积分: 343

Re: Allwinner全志V3s板子用ns2009驱动电阻触摸屏,在荔枝派zero工作好好的软件,我的板子出这个错误:

果然是没有上拉, 这坑挖大了。
我去飞线试一试。

离线

楼主 #4 2017-11-14 14:24:49

daydayup
会员
注册时间: 2017-10-09
已发帖子: 343
积分: 343

Re: Allwinner全志V3s板子用ns2009驱动电阻触摸屏,在荔枝派zero工作好好的软件,我的板子出这个错误:

飞线就好了,谢谢大神.

离线

#5 2018-07-18 10:48:20

yangbo
会员
注册时间: 2018-06-22
已发帖子: 11
积分: 11

Re: Allwinner全志V3s板子用ns2009驱动电阻触摸屏,在荔枝派zero工作好好的软件,我的板子出这个错误:

请问一下,我不用触摸屏,如果关闭上面的错误提示,我是用buildroot编译的,在make menuconfig里面去掉了tslib,现在改怎么办?谁知道回复一下,谢谢

离线

#6 2018-07-18 11:11:37

晕哥
管理员
注册时间: 2017-09-06
已发帖子: 9,191
积分: 9197

Re: Allwinner全志V3s板子用ns2009驱动电阻触摸屏,在荔枝派zero工作好好的软件,我的板子出这个错误:

在设备树里面删除 ns2009 即可

打开 arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts

删除:

&i2c0 {
    status = "okay";

    ns2009: ns2009@48 {
        compatible = "nsiway,ns2009";
        reg = <0x48>;
    };

};

重新编译出 dtb 文件, 烧录.





离线

#7 2018-07-18 11:23:07

yangbo
会员
注册时间: 2018-06-22
已发帖子: 11
积分: 11

Re: Allwinner全志V3s板子用ns2009驱动电阻触摸屏,在荔枝派zero工作好好的软件,我的板子出这个错误:

谢谢了,

离线

#8 2020-10-26 17:08:22

jkl
会员
注册时间: 2019-11-18
已发帖子: 218
积分: 136.5

Re: Allwinner全志V3s板子用ns2009驱动电阻触摸屏,在荔枝派zero工作好好的软件,我的板子出这个错误:

daydayup 说:

Allwinner全志V3s板子用ns2009驱动电阻触摸屏,在荔枝派zero工作好好的软件,我的板子出这个错误:

[   13.046734] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[   13.053285] input input1: Poll touch data failed: -110
[   15.206667] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[   15.213230] input input1: Poll touch data failed: -110
[   17.366664] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[   17.373225] input input1: Poll touch data failed: -110
[   19.526660] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[   19.533223] input input1: Poll touch data failed: -110
[   21.686660] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[   21.693220] input input1: Poll touch data failed: -110
[   23.846663] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[   23.853220] input input1: Poll touch data failed: -110

请问一下,我现在遇到同样的问题,上拉也给安排上了,但是还是一样的错误,这是怎么回事?
   89.440754] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[   91.520754] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[   93.600759] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[   95.680755] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[   97.760754] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[   99.840761] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[  101.920755] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[  104.000756] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[  106.080762] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[  108.160756] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[  110.240753] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[  112.320752] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[  114.400754] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[  116.480753] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[  118.560753] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[  120.640759] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[  122.720753] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[  124.800754] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[  126.880759] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[  128.960754] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[  131.040755] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[  133.120759] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[  135.200755] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[  137.280757] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[  139.361038] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0

最近编辑记录 jkl (2020-10-26 17:14:20)

离线

页脚

工信部备案:粤ICP备20025096号 Powered by FluxBB

感谢为中文互联网持续输出优质内容的各位老铁们。 QQ: 516333132, 微信(wechat): whycan_cn (哇酷网/挖坑网/填坑网) service@whycan.cn