【2】step by step 编译全志 f1c100s 官方linux bsp (重建文件系统已经搞定，详见5楼)

晕哥 · 2018-08-16 11:54:17

参考链接: 【1】step by step 编译全志 f1c100s 官方linux bsp

这次完全按照官方的c600 bsp 套路来搞，

sdk，工具链，烧写工具都是官方的.

再来走一次流程.

上面是运行 fb-test-rect 程序，也就是 buildroot 里面 fbtest 编译出来的例程。

晕哥 · 2018-08-16 11:55:04

1. 克隆c600 bsp 源码:

sudo apt-get install -y libncurses-dev
sudo apt-get install -y lib32z1 lib32ncurses5 lib32stdc++6
sudo apt-get install -y u-boot-tools make g++ gettext python unzip fakeroot
sudo apt-get install -y bison texinfo bc flex
sudo apt-get install -y software-properties-common
sudo curl -s https://packagecloud.io/install/repositories/github/git-lfs/script.deb.sh | sudo bash
sudo apt-get install git-lfs
git lfs install
cd /opt
git lfs clone https://bitbucket.org/qq516333132/c600.git

2. 配置:

cd /opt/c600
./build.sh config ###配置
./build.sh -p sunivw1p1 -k linux-3.10 -m all ###编译
./build.sh pack ####打包

3. 修改一处代码:
修改 /opt/c600/out/sunivw1p1/linux/common/buildroot/build/host-makedevs/makedevs.c 545行:

return 0;
改为:
return ret;

4. buildroot 编译
因为在c600的buildroot没有搞定直接配置编译，所以单独处理buildroot问题，使用c600 bsp的工具链.

cd /opt/
wget https://buildroot.org/downloads/buildroot-2017.08.1.tar.gz ###下载buildroot源码
tar xvf buildroot-2017.08.1.tar.gz
cd /opt/buildroot-2017.08.1/
wget https://whycan.cn/files/c600_bsp/buildroot.config -O .config ###下载配置文件
make ###直接编译

5. 拷贝可执行文件:

cp /opt/buildroot-2017.08.1/output/target/usr/bin/fb-test* /opt/c600/out/sunivw1p1/linux/common/buildroot/target/usr/bin ##拷贝到根文件系统

一楼运行的就是 fb-test-rect 画随机矩形的demo

6. 重新打包:

cd /opt/c600
./build.sh -p sunivw1p1 -k linux-3.10 -m all ###编译
./build.sh pack ####打包
cp tools/pack/sunivw1p1_linux_evb_uart0.img /var/www/html/

/opt/c600/tools/pack/sunivw1p1_linux_evb_uart0.img 这个就是我们生成的文件.

7. 烧录:

全志官方烧录软件: PhoenixSuit_CN_debug.msi
我编译的img: sunivw1p1_linux_evb_uart0.img.tar.gz
串口线接 A0, A1
安装 PhoenixSuit, 装好驱动,
打开 PhoenixSuit,
选择 sunivw1p1_linux_evb_uart0.img 文件,
拔出TF卡, 短路SPI_CLK, 通过USB线连接电脑,
然后就会开始自动烧录,
串口A0,A1可以看到 u-boot的烧录log.

晕哥 · 2018-08-16 11:55:08

默认串口是 PA2, PA3.

参考链接: licheepi nano f1c100s PCB板的引脚标注(PA0..3)应该反了

晕哥 · 2018-08-16 11:55:13

修改分区的方法: 打开 sys_partition_nor.fex

;---------------------------------------------------------------------------------------------------------
; 说明： 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串
;---------------------------------------------------------------------------------------------------------


;--------------------------------------------------------------------------------------------------
;                                   固件下载参数配置
;--------------------------------------------------------------------------------------------------
;****************************************************
;    mbr的大小, 以Kbyte为单位
;****************************************************
[mbr]
size = 16

;********************************************************************************************************
;                                              分区配置
;
;
;  partition 定义范例:
;    [partition]                ;  //表示是一个分区
;    name        = USERFS2      ; //分区名称
;    size        = 16384        ; //分区大小 单位: 扇区.分区表示个数最多2^31 * 512 = 2T
;    downloadfile = "123.fex"   ; //下载文件的路径和名称，可以使用相对路径，相对是指相对于image.cfg文件所在分区。也可以使用绝对路径
;    keydata     = 1            ; //私有数据分区，重新量产数据将不丢失
;    encrypt     = 1            ; //采用加密方式烧录，将提供数据加密，但损失烧录速度
;    user_type   = ?            ; //私有用法
;    verify      = 1            ; //要求量产完成后校验是否正确
;
; 注：1、name唯一, 不允许同名
;     2、name最大12个字符
;     3、size = 0, 将创建一个无大小的空分区
;     4、为了安全和效率考虑，分区大小最好保证为16M字节的整数倍
;********************************************************************************************************
[partition_start]


[partition]
    name         = boot
    ;size         = 4224
    ;size         = 5120
	size         = 4608
    downloadfile = "kernel.fex"
    user_type    = 0x8000

[partition]
    name         = rootfs
    ;size         = 10752
    size         = 16384
	;size         = 10880
    downloadfile = "rootfs_squashfs.fex"
    user_type    = 0x8000

[partition]
   name         = env
   size         = 256
   downloadfile = "env_nor.fex"
   user_type    = 0x8000

[partition]
   name         = bootlogo
   size         = 128
;   downloadfile = "bootlogo.fex"
   user_type    = 0x8000

[partition]
   name         = recoverk
   size         = 3072
   downloadfile = "recover_k.fex"   
   user_type    = 0x8000

[partition]
   name         = recoverf
   size         = 6656
   downloadfile = "recover_f.fex"   
   user_type    = 0x8000

[partition]
   name         = private
   size         = 128
   ;ro           = 0
   user_type    = 0x8000   
[/quote]



分区是这样的:
[quote]
/ # cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00080000 00001000 "uboot"
mtd1: 00240000 00001000 "boot"
mtd2: 00800000 00001000 "rootfs"
mtd3: 00020000 00001000 "env"
mtd4: 00010000 00001000 "bootlogo"
mtd5: 00180000 00001000 "recoverk"
mtd6: 00340000 00001000 "recoverf"
mtd7: 00010000 00001000 "private"
[/quote]



现在发现 linux 分区 2.4M 已经不够用了, 只能想办法从文件系统割 1M 出来放 linux 分区:

[quote]
;---------------------------------------------------------------------------------------------------------
; 说明： 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串
;---------------------------------------------------------------------------------------------------------


;--------------------------------------------------------------------------------------------------
;                                   固件下载参数配置
;--------------------------------------------------------------------------------------------------
;****************************************************
;    mbr的大小, 以Kbyte为单位
;****************************************************
[mbr]
size = 16

;********************************************************************************************************
;                                              分区配置
;
;
;  partition 定义范例:
;    [partition]                ;  //表示是一个分区
;    name        = USERFS2      ; //分区名称
;    size        = 16384        ; //分区大小 单位: 扇区.分区表示个数最多2^31 * 512 = 2T
;    downloadfile = "123.fex"   ; //下载文件的路径和名称，可以使用相对路径，相对是指相对于image.cfg文件所在分区。也可以使用绝对路径
;    keydata     = 1            ; //私有数据分区，重新量产数据将不丢失
;    encrypt     = 1            ; //采用加密方式烧录，将提供数据加密，但损失烧录速度
;    user_type   = ?            ; //私有用法
;    verify      = 1            ; //要求量产完成后校验是否正确
;
; 注：1、name唯一, 不允许同名
;     2、name最大12个字符
;     3、size = 0, 将创建一个无大小的空分区
;     4、为了安全和效率考虑，分区大小最好保证为16M字节的整数倍
;********************************************************************************************************
[partition_start]

[partition]
    name         = boot
    ;size         = 4224
    ;size         = 5120
        size         = [b]6656[/b]
    downloadfile = "kernel.fex"
    user_type    = 0x8000

[partition]
    name         = rootfs
    ;size         = 10752
    size         = [b]14336[/b]
        ;size         = 10880
    downloadfile = "rootfs_squashfs.fex"
    user_type    = 0x8000

[partition]
   name         = env
   size         = 256
   downloadfile = "env_nor.fex"
   user_type    = 0x8000

[partition]
   name         = bootlogo
   size         = 128
;   downloadfile = "bootlogo.fex"
   user_type    = 0x8000

[partition]
   name         = recoverk
   size         = 3072
   downloadfile = "recover_k.fex"
   user_type    = 0x8000

[partition]
   name         = recoverf
   size         = 6656
   downloadfile = "recover_f.fex"
   user_type    = 0x8000

[partition]
   name         = private
   size         = 128
   ;ro           = 0
   user_type    = 0x8000
[/quote]

现在结果:
[quote]
/ # cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00080000 00001000 "uboot"
mtd1: 00340000 00001000 "boot"
mtd2: 00700000 00001000 "rootfs"
mtd3: 00020000 00001000 "env"
mtd4: 00010000 00001000 "bootlogo"
mtd5: 00180000 00001000 "recoverk"
mtd6: 00340000 00001000 "recoverf"
mtd7: 00010000 00001000 "private"

运行结果正常!

晕哥 · 2018-08-16 11:55:18

通过配置buildroot重建、修改文件系统, 加入各种软件包:

make menuconfig -C buildroot/
cp buildroot/.config out/sunivw1p1/linux/common/buildroot/.config
./build.sh -p sunivw1p1 -k linux-3.10 -m buildroot

感谢本站网友 @kandy

2018-10-02

晕哥 · 2018-08-16 11:55:29

占坑

晕哥 · 2018-08-17 16:55:36

按2楼的套路，
做了一个 ucgui 的demo放进去,
发现显示不对，
应该是写像素逻辑没处理好.
发个图片留念一下。

The framebuffer device was opened successfully.
sizeof(unsigned short) = 2
800x480, 16bpp,LCD_XSIZE=800, LCD_YSIZE=480
xoffset:0, yoffset:0, line_length: 1600

晕哥 · 2018-09-17 14:57:51

[ 279.433120] sd 7:0:0:0: [sda] 3842048 512-byte logical blocks: (1.96 GB/1.83 GiB)
[ 279.442971] sd 7:0:0:0: [sda] Write Protect is off
[ 279.448386] sd 7:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 279.455844] sd 7:0:0:0: [sda] No Caching mode page found
[ 279.461911] sd 7:0:0:0: [sda] Assuming drive cache: write through
[ 279.474863] sd 7:0:0:0: [sda] No Caching mode page found
[ 279.480805] sd 7:0:0:0: [sda] Assuming drive cache: write through
[ 279.499750] sda: sda1
[ 279.516281] sd 7:0:0:0: [sda] No Caching mode page found
[ 279.522366] sd 7:0:0:0: [sda] Assuming drive cache: write through
[ 279.529186] sd 7:0:0:0: [sda] Attached SCSI removable disk

/ # mount -t vfat /dev/sda1 /tmp/aaa
[ 304.067629] FAT-fs (sda1): IO charset iso8859-1 not found
mount: mounting /dev/sda1 on /tmp/aaa failed: Invalid argument

挂载 U盘出错.

晕哥 · 2018-09-17 15:02:19

找到一个帖子，看能不能解决: https://blog.csdn.net/lanmanck/article/details/6347278

其实这是内核配置问题，主要是文件系统不全，当然，USB驱动和Mass storage/SCSI disk/VFat支持要选上，如果还不行，请参考如下：
1、提示
Unable to load NLS charset cp437
FAT: codepage cp437 not found
则进入
File systems－－》
Native language support－－》
<*> Codepage 437 (United States, Canada)
选上即可，若
2、再提示：
Unable to load NLS charset iso8859-1

FAT: IO charset iso8859-1 not found
则进入：
File systems－－》
Native language support－－》
<*> NLS ISO 8859-1 (Latin 1; Western European Languages)
选上即可！

晕哥 · 2018-09-17 15:17:58

编译一个，烧进去试一试看

晕哥 · 2018-09-17 15:33:07

f1c100s 终于把U盘测试成功了.

晕哥 · 2018-09-17 15:34:37

看起来官方烧录文件就是把 u-boot 先跑起来，然后才开始USB通讯、flash擦写校验的。

晕哥 · 2018-09-17 16:37:43

CONFIG_USB_SUNXI_USB_DEBUG=y

.config 里面开启USB DEBUG, 可以打印USB相关调试信息.

晕哥 · 2018-09-18 16:02:07

经过一番折腾，终于把 USB 设备模式编译成功.

重要参考网址: https://www.cnblogs.com/tid-think/p/9207652.html

晕哥 · 2018-09-18 16:04:49

[ 4.284976]
[ 4.284976]
[ 4.284976] insmod_host_driver
[ 4.284976]
[ 4.293332] hci: ERR: sunxi_ehci is null
[ 4.297756] hci: ERR: sunxi_ohci is null
[ 4.302111] [sw_hcd0]: sunxi_usb_host0_enable start
[ 4.307638] -------sunxi_hcd0_soft_disconnect---------
[ 4.314015] [sw_hcd0]: open_usb_clock
[ 4.318440] [sw_hcd0]: host_init_state = 1
[ 4.323040] [sw_hcd0]: [sunxi_hcd_host0]:hcd0 set_regulator_io:ON
[ 4.329884] [sw_hcd0]: [sunxi_hcd_host0]: Set USB Power ON
[ 4.336032] [sw_hcd0]: sunxi_usb_host0_enable end
[ 4.341255] host_chose finished 86!

/ # find . |grep ko$
./lib/modules/3.10.65/g_audio.ko
./lib/modules/3.10.65/g_dbgp.ko
./lib/modules/3.10.65/g_ffs.ko
./lib/modules/3.10.65/g_hid.ko
./lib/modules/3.10.65/g_midi.ko
./lib/modules/3.10.65/g_serial.ko
./lib/modules/3.10.65/g_zero.ko
./lib/modules/3.10.65/gadgetfs.ko
./lib/modules/3.10.65/libcomposite.ko
./lib/modules/3.10.65/snd-rawmidi.ko
./lib/modules/3.10.65/u_serial.ko
./lib/modules/3.10.65/usb_f_acm.ko
./lib/modules/3.10.65/usb_f_obex.ko
./lib/modules/3.10.65/usb_f_serial.ko
./lib/modules/3.10.65/usb_f_ss_lb.ko
./lib/modules/3.10.65/xradio_core.ko
./lib/modules/3.10.65/xradio_mac.ko
./lib/modules/3.10.65/xradio_wlan.ko
/ # insmod ./lib/modules/3.10.65/libcomposite.ko
/ # insmod ./lib/modules/3.10.65/gadgetfs.ko
[ 35.043355] gadgetfs: USB Gadget filesystem, version 24 Aug 2004
/ # insmod ./lib/modules/3.10.65/g_audio.ko
[ 51.296408] [sw_udc]: alloc request: ep(0xc0484058, ep0, 64), req(0xc1b333c0)
[ 51.314170] [sw_udc]: sunxi_udc_set_selfpowered_2320: usb device is not active
[ 51.322327] (null): afunc_bind:968 Error!
[ 51.327045] g_audio gadget: Linux USB Audio Gadget, version: Feb 2, 2012
[ 51.334544] g_audio gadget: g_audio ready
[ 51.338994] [sw_udc]: [sunxi_usb_udc]: binding gadget driver 'g_audio'
/ #

然而还是没卵用.

晕哥 · 2018-09-18 17:14:26

原来是上面那个错误是设备树没有配, 缺这两个:

ehci0:ehci0-controller@0x01c1a000 {
compatible = "allwinner,sun50i-ehci0";
reg = <0x0 0x01c1a000 0x0 0xFFF>, /*hci0 base*/
   <0x0 0x01c00000 0x0 0x100>, /*sram base*/
   <0x0 0x01c19000 0x0 0x1000>; /*otg base*/
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_usbphy0>, <&clk_usbehci0>;
hci_ctrl_no = <0>;
status = "okay";
};
ohci0:ohci0-controller@0x01c1a400 {
compatible = "allwinner,sun50i-ohci0";
reg = <0x0 0x01c1a000 0x0 0xFFF>, /*hci0 base*/
   <0x0 0x01c00000 0x0 0x100>, /*sram base*/
   <0x0 0x01c19000 0x0 0x1000>; /*otg base*/
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_usbphy0>, <&clk_usbohci0>;
hci_ctrl_no = <0>;
status = "okay";
};

https://github.com/qq516333132/c600/blob/master/linux-3.10/arch/arm/boot/dts/sun8iw10p1.dtsi
https://github.com/qq516333132/c600/blob/master/linux-3.10/arch/arm/boot/dts/sunivw1p1.dtsi

https://github.com/qq516333132/c600/blob/master/linux-3.10/arch/arm/boot/dts/sun8iw10p1-clk.dtsi
https://github.com/qq516333132/c600/blob/master/linux-3.10/arch/arm/boot/dts/sunivw1p1-clk.dtsi

连时钟都没有定义:

https://github.com/qq516333132/c600/blob/master/linux-3.10/drivers/clk/sunxi/clk-sun8iw10.c
https://github.com/qq516333132/c600/blob/master/linux-3.10/drivers/clk/sunxi/clk-sunivw1.c

看来，要驱动 usb device, 任重道远.

晕哥 · 2018-09-20 17:48:31

修改 tools/pack/chips/sunivw1p1/configs/evb/sys_config.fex 开启USB:

;--------------------------------
;[usbc0]：控制器0的配置。
;usb_used：USB使能标志。置1，表示系统中USB模块可用,置0,则表示系统USB禁用。
;usb_port_type：USB端口的使用情况。 0：device only;1：host only;2：OTG
;usb_detect_type：USB端口的检查方式。0：不做检测;1：vbus/id检查;2：id/dpdm检查
;usb_id_gpio：USB ID pin脚配置。具体请参考gpio配置说明。
;usb_det_vbus_gpio：USB DET_VBUS pin脚配置。具体请参考gpio配置说明。
;usb_drv_vbus_gpio：USB DRY_VBUS pin脚配置。具体请参考gpio配置说明。
;usb_det_vbus_gpio: "axp_ctrl",表示axp 提供
;--------------------------------
;--------------------------------
;--- USB0控制标志
;--------------------------------
[usbc0]
usbc0_used = 1
usb_port_type = 1
usb_detect_type = 1
usb_id_gpio = port:PE02<0><1><default><default>
;usb_det_vbus_gpio = "axp_ctrl"
;usb_drv_vbus_gpio = port:PB07<1><0><default><0>
usb_host_init_state = 0
usb_regulator_io = "nocare"
usb_regulator_vol = 0
;usb_wakeup_suspend = 0
;--- USB Device
;usb_luns = 3
;usb_serial_unique = 0
;usb_serial_number = "20080411"

晕哥 · 2018-09-20 18:51:32

根据网友 @szyusong 提示 https://whycan.cn/t_1626.html

1. 添加代码

is_udc_enable = is_on;

2. 修改设备树:

修改 sys_config.fex 成为 device only 模式，

仍然无法识别成 usb device, 一头雾水 .

晕哥 · 2018-09-22 16:00:54

你这个 linux 是什么版本?在树莓派上面跑?没试过，或许不行.

晕哥 · 2018-09-22 18:23:33

qiuchen0403 说：

多谢晕哥，我用的是linux 9.4
pi@raspberrypi:~ $ lsb_release -a
No LSB modules are available.
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 9.4 (stretch)
Release: 9.4
Codename: stretch

那现在可以了吗。

晕哥 · 2018-09-22 18:51:22

第一次看到用树莓派做生产力工具哈

晕哥 · 2018-09-22 21:58:53

ippen 说：

我用cubieboard做过，但编译速度感人

Cubieboard的团队主成员汤亮在大学期间一直沉醉于嵌入式的开发而经常逃课，最终未能按时拿到毕业证，错过了去芯片公司工作的机会，最后成为了一名程序员。回到珠海后，他向同事讲述了所见所闻，并表明了自己的创业心意。最后他们五个人抱着“试试看”的心态，利用业余时间开工。最初的时候，他们并不知道要做什么类型的产品，经常到开发社区里面了解需求。后来有人给汤亮写了一封很长的邮件，告诉他开发板、单板机的市场需求巨大。不久之后，曾经跟他买过机顶盒的海外创客也告诉他“risc + linux + small form factor + community = revolution”，使得他们最终决定做开发板，并命名为Cubieboard。

厉害厉害！

晕哥 · 2018-09-25 11:15:27

/tmp/aaa # dd if=/dev/zero of=zero1.bin
90秒
/tmp/aaa #
/tmp/aaa # ls -l zero1.bin
-rwxr-xr-x 1 root root 300794368 Jan 1 00:09 zero1.bin
/tmp/aaa #
/tmp/aaa #
/tmp/aaa # dd if=zero1.bin of=/dev/null
587489+0 records in
587489+0 records out
/tmp/aaa # dd if=zero1.bin of=/dev/null
587489+0 records in
587489+0 records out
28秒

测试了一下我手上这个 U盘读速度 10MB/s, 写速度 3MB/s.
测试结果还算满意，找个Windows的测试工具对比试一试。

晕哥 · 2018-09-25 11:31:00

同一个U盘在Windows测试!

晕哥 · 2018-09-30 12:54:54

路人甲说：

我也一样，按照晕哥方法搞定了 device / host,但是怎么修改 fex otg都无法切换。

我们一起加油搞 otg 吧，只差一步之遥了。

晕哥 · 2018-10-08 15:46:56

;A31 PAD application
;---------------------------------------------------------------------------------------------------------
; 说明： 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串
; 描述gpio的形式：Port:端口+组内序号<功能分配><内部电阻状态><驱动能力><输出电平状态>
;---------------------------------------------------------------------------------------------------------

[product]
version = "100"
machine = "evb"

[platform]
eraseflag   = 0
;----------------------------------------------------------------------------------
;   system configuration
;   ?
;dcdc1_vol                                                      ---set dcdc1 voltage,mV,1600-3400,100mV/step
;dcdc2_vol                                                      ---set dcdc2 voltage,mV,600-1540,20mV/step
;dcdc3_vol                                                      ---set dcdc3 voltage,mV,600-1860,20mV/step
;dcdc4_vol                                                      ---set dcdc4 voltage,mV,600-1540,20mV/step
;dcdc5_vol                                                      ---set dcdc5 voltage,mV,1000-2550,50mV/step
;aldo2_vol                                                      ---set aldo2 voltage,mV,700-3300,100mV/step
;aldo3_vol                                                      ---set aldo3 voltage,mV,700-3300,100mV/step
;----------------------------------------------------------------------------------
[target]
boot_clock      = 408
storage_type    = 3
burn_key        = 1

[power_sply]
dcdc1_vol                  = 3000
dcdc2_vol                  = 1200
dcdc3_vol                  = 1200
dcdc4_vol                  = 1200
dcdc5_vol                  = 1500
aldo2_vol                  = 1800
aldo3_vol                  = 3000

[card_boot]
logical_start   = 40960
sprite_gpio0    =

;---------------------------------------------------------------------------------------------------------
; if 1 == standby_mode, then support super standby;
; else, support normal standby.
;---------------------------------------------------------------------------------------------------------
[pm_para]
standby_mode            = 1

[card0_boot_para]
card_ctrl       = 0
card_high_speed = 1
card_line       = 4
sdc_d1          = port:PF0<2><1><2><default>
sdc_d0          = port:PF1<2><1><2><default>
sdc_clk         = port:PF2<2><1><2><default>
sdc_cmd         = port:PF3<2><1><2><default>
sdc_d3          = port:PF4<2><1><2><default>
sdc_d2          = port:PF5<2><1><2><default>
[card2_boot_para]
card_ctrl       = 2
card_high_speed = 1
card_line       = 8
sdc_clk         = port:PC5<3><1><3><default>
sdc_cmd         = port:PC6<3><1><3><default>
sdc_d0          = port:PC8<3><1><3><default>
sdc_d1          = port:PC9<3><1><3><default>
sdc_d2          = port:PC10<3><1><3><default>
sdc_d3          = port:PC11<3><1><3><default>
sdc_d4          = port:PC12<3><1><3><default>
sdc_d5          = port:PC13<3><1><3><default>
sdc_d6          = port:PC14<3><1><3><default>
sdc_d7          = port:PC15<3><1><3><default>
sdc_emmc_rst    = port:PC16<3><1><3><default>
sdc_ds          = port:PC01<3><1><3><default>

[twi_para]
twi_port        = 0
twi_scl         = port:PD12<3><default><default><default>
twi_sda         = port:PD00<3><default><default><default>


[uart_para]
uart_debug_port = 1
uart_debug_tx   = port:PA3<5><1><default><default>
uart_debug_rx   = port:PA2<5><1><default><default>


[jtag_para]
jtag_enable     = 1
jtag_ms         = port:PF0<3><default><default><default>
jtag_ck         = port:PF5<3><default><default><default>
jtag_do         = port:PF3<3><default><default><default>
jtag_di         = port:PF1<3><default><default><default>


;*****************************************************************************
;sdram configuration
;
;*****************************************************************************
[dram_para]

dram_clk        = 480
dram_type       = 3
dram_zq         = 0x77bb
dram_odt_en     = 1
dram_para1      = 0x004319f4
dram_para2      = 0x5
dram_mr0        = 0x620
dram_mr1        = 0x0
dram_mr2        = 0x8
dram_mr3        = 0
dram_tpr0       = 0x06141B10
dram_tpr1       = 0x40416
dram_tpr2       = 0x03030306
dram_tpr3       = 0x2006
dram_tpr4       = 0x05040405
dram_tpr5       = 0x05050302
dram_tpr6       = 0x90006644
dram_tpr7       = 0x42c21590
dram_tpr8       = 0xd05612c0
dram_tpr9       = 0x00083def
dram_tpr10      = 0x18082356
dram_tpr11      = 0x32034156
dram_tpr12      = 0
dram_tpr13      = 0


;----------------------------------------------------------------------------------
;i2c configuration
;----------------------------------------------------------------------------------
[twi0]
twi0_used        = 0
twi0_scl         = port:PD12<3><default><default><default>
twi0_sda         = port:PD00<3><default><default><default>

[twi1]
twi1_used        = 0
twi1_scl         = port:PB00<2><default><default><default>
twi1_sda         = port:PB01<2><default><default><default>

[twi2]
twi2_used        = 0
twi2_scl         = port:PE0<4><default><default><default>
twi2_sda         = port:PE1<4><default><default><default>

;----------------------------------------------------------------------------------
;TWI device configuration
;compatible        --- device name
;reg               --- device address
;----------------------------------------------------------------------------------
;[twi0/twi_board0]
;compatible        =
;reg               =
;----------------------------------------------------------------------------------
;uart configuration
;uart_type ---  2 (2 wire), 4 (4 wire), 8 (8 wire, full function)
;----------------------------------------------------------------------------------
[uart0]
uart0_used       = 1
uart0_port       = 0
uart0_type       = 2
uart0_tx         = port:PE1<5><1><default><default>
uart0_rx         = port:PE0<5><1><default><default>

[uart1]
uart1_used       = 1
uart1_port       = 1
uart1_type       = 2
uart1_tx         = port:PA3<5><1><default><default>
uart1_rx         = port:PA2<5><1><default><default>

;----------------------------------------------------------------------------------
;SPI controller configuration
;----------------------------------------------------------------------------------
[spi0]
spi0_used       = 1
spi0_cs_number  = 1
spi0_cs_bitmap  = 1
spi0_cs0        = port:PC1<2><1><default><default>
spi0_sclk       = port:PC0<2><default><default><default>
spi0_mosi       = port:PC3<2><default><default><default>
spi0_miso       = port:PC2<2><default><default><default>

;----------------------------------------------------------------------------------
;SPI device configuration
;compatible        --- device name
;spi-max-frequency --- work frequency
;reg               --- chip select
;optional properties: spi-cpha, spi-cpol, spi-cs-high
;----------------------------------------------------------------------------------
;[spi0/spi_board0]
;compatible        =
;spi-max-frequency =
;reg               =
;spi-cpha
;spi-cpol
;spi-cs-high

;----------------------------------------------------------------------------------
;resistance tp configuration
;----------------------------------------------------------------------------------
[rtp_para]
rtp_used      = 1
rtp_screen_size = 5
rtp_regidity_level = 5
rtp_press_threshold_enable = 0
rtp_press_threshold = 0x1f40
rtp_sensitive_level = 0xf
rtp_exchange_x_y_flag = 0

;----------------------------------------------------------------------------------
;capacitor tp configuration
;external int function
;wakeup output function
;notice ---    tp_int_port &  tp_io_port use the same port
;----------------------------------------------------------------------------------
[ctp_para]
ctp_used            = 0
ctp_twi_id          = 1
ctp_twi_addr        = 0x5d
ctp_screen_max_x    = 1280
ctp_screen_max_y    = 800
ctp_revert_x_flag   = 1
ctp_revert_y_flag   = 1
ctp_exchange_x_y_flag = 1

ctp_int_port        = port:PA03<6><default><default><default>
ctp_wakeup          = port:PA02<1><default><default><1>
;----------------------------------------------------------------------------------
;touch key configuration
;----------------------------------------------------------------------------------
[tkey_para]
tkey_used           = 0
tkey_twi_id         =
tkey_twi_addr       =
tkey_int            =

;----------------------------------------------------------------------------------
;motor configuration
;----------------------------------------------------------------------------------
[motor_para]
motor_used          = 0
;motor_shake         = port:power3<1><default><default><1>

[nand0_para]
nand0_support_2ch    = 0

nand0_used          = 0
nand0_we            = port:PC00<2><0><1><default>
nand0_ale           = port:PC01<2><0><1><default>
nand0_cle           = port:PC02<2><0><1><default>
nand0_ce0           = port:PC03<2><1><1><default>
nand0_nre           = port:PC04<2><0><1><default>
nand0_rb0           = port:PC05<2><1><1><default>
nand0_d0            = port:PC06<2><0><1><default>
nand0_d1            = port:PC07<2><0><1><default>
nand0_d2            = port:PC08<2><0><1><default>
nand0_d3            = port:PC09<2><0><1><default>
nand0_d4            = port:PC10<2><0><1><default>
nand0_d5            = port:PC11<2><0><1><default>
nand0_d6            = port:PC12<2><0><1><default>
nand0_d7            = port:PC13<2><0><1><default>
nand0_ndqs          = port:PC14<2><0><1><default>

nand0_regulator1                = "vcc-nand"
nand0_regulator2                = "none"
nand0_cache_level = 0x55aaaa55
nand0_flush_cache_num = 0x55aaaa55
nand0_capacity_level = 0x55aaaa55
nand0_id_number_ctl = 0x55aaaa55
nand0_print_level = 0x55aaaa55
nand0_p0 = 0x55aaaa55
nand0_p1 = 0x55aaaa55
nand0_p2 = 0x55aaaa55
nand0_p3 = 0x55aaaa55

;----------------------------------------------------------------------------------
;disp init configuration
;
;disp_mode             (0:screen0<screen0,fb0>)
;screenx_output_type   (0:none; 1:lcd; 3:hdmi;)
;screenx_output_mode   (used for hdmi output, 0:480i 1:576i 2:480p 3:576p 4:720p50)
;                      (5:720p60 6:1080i50 7:1080i60 8:1080p24 9:1080p50 10:1080p60)
;fbx format            (4:RGB655 5:RGB565 6:RGB556 7:ARGB1555 8:RGBA5551 9:RGB888 10:ARGB8888 12:ARGB4444)
;fbx pixel sequence    (0:ARGB 1:BGRA 2:ABGR 3:RGBA)
;fb0_scaler_mode_enable(scaler mode enable, used FE)
;fbx_width,fbx_height  (framebuffer horizontal/vertical pixels, fix to output resolution while equal 0)
;lcdx_backlight        (lcd init backlight,the range:[0,256],default:197
;lcdx_yy               (lcd init screen bright/contrast/saturation/hue, value:0~100, default:50/50/57/50)
;lcd0_contrast         (LCD contrast, 0~100)
;lcd0_saturation       (LCD saturation, 0~100)
;lcd0_hue              (LCD hue, 0~100)
;----------------------------------------------------------------------------------
[disp_init]
disp_init_enable         = 1
disp_mode                = 0

screen0_output_type      = 1
screen0_output_mode      = 4

screen1_output_type      = 1
screen1_output_mode      = 4

fb0_framebuffer_num      = 2
fb0_pixel_sequence       = 0
fb0_scaler_mode_enable   = 0

fb0_format               = 5
fb0_width                = 800
fb0_height               = 480

fb1_framebuffer_num      = 0
fb1_pixel_sequence       = 0
fb1_scaler_mode_enable   = 0

fb1_format               = 0
fb1_width                = 0
fb1_height               = 0

lcd0_backlight           = 50
lcd1_backlight           = 50

lcd0_bright              = 50
lcd0_contrast            = 50
lcd0_saturation          = 57
lcd0_hue                 = 50

lcd1_bright              = 50
lcd1_contrast            = 50
lcd1_saturation          = 57
lcd1_hue                 = 50

;----------------------------------------------------------------------------------
;lcd0 configuration

;lcd_if:               0:hv(sync+de); 1:8080; 2:ttl; 3:lvds; 4:dsi; 5:edp; 6:extend dsi
;lcd_x:                lcd horizontal resolution
;lcd_y:                lcd vertical resolution
;lcd_width:            width of lcd in mm
;lcd_height:           height of lcd in mm
;lcd_dclk_freq:        in MHZ unit
;lcd_pwm_freq:         in HZ unit
;lcd_pwm_pol:          lcd backlight PWM polarity
;lcd_pwm_max_limit     lcd backlight PWM max limit(<=255)
;lcd_hbp:              hsync back porch
;lcd_ht:               hsync total cycle
;lcd_vbp:              vsync back porch
;lcd_vt:               vysnc total cycle
;lcd_hspw:             hsync plus width
;lcd_vspw:             vysnc plus width
;lcd_lvds_if:          0:single link;  1:dual link
;lcd_lvds_colordepth:  0:8bit; 1:6bit
;lcd_lvds_mode:        0:NS mode; 1:JEIDA mode
;lcd_frm:              0:disable; 1:enable rgb666 dither; 2:enable rgb656 dither
;lcd_io_phase:         0:noraml; 1:intert phase(0~3bit: vsync phase; 4~7bit:hsync phase;
;                      8~11bit:dclk phase; 12~15bit:de phase)
;lcd_gamma_en          lcd gamma correction enable
;lcd_bright_curve_en   lcd bright curve correction enable
;lcd_cmap_en           lcd color map function enable
;deu_mode              0:smoll lcd screen; 1:large lcd screen(larger than 10inch)
;lcdgamma4iep:         Smart Backlight parameter, lcd gamma vale * 10;
;                      decrease it while lcd is not bright enough; increase while lcd is too bright
;smart_color           90:normal lcd screen 65:retina lcd screen(9.7inch)
;----------------------------------------------------------------------------------
[lcd0]
lcd_used            = 1

lcd_driver_name     = "default_lcd"
lcd_if              = 0
lcd_x               = 800
lcd_y               = 480
lcd_width           = 150
lcd_height          = 94
lcd_dclk_freq       = 33
lcd_pwm_used        = 0
lcd_pwm_ch          = 0
lcd_pwm_freq        = 10000
lcd_pwm_pol         = 0
lcd_hbp             = 46
lcd_ht              = 1055
lcd_hspw            = 0
lcd_vbp             = 23
lcd_vt              = 525
lcd_vspw            = 0

lcd_hv_if           = 0
lcd_hv_smode        = 0
lcd_hv_s888_if      = 0
lcd_hv_syuv_if      = 0
lcd_hv_vspw         = 0
lcd_hv_hspw         = 0

lcd_lvds_if         = 0
lcd_lvds_colordepth = 1
lcd_lvds_mode       = 0
lcd_lvds_ch         = 0
lcd_lvds_bitwidth   = 0
lcd_lvds_io_cross   = 0

lcd_cpu_if          = 0

lcd_frm             = 0
lcd_io_phase        = 0x0000
lcd_gamma_en        = 0
lcd_bright_curve_en = 0
lcd_cmap_en         = 0
deu_mode            = 0
lcdgamma4iep        = 22
lcd_io_cfg0         = 0x04000000
smart_color         = 90

lcd_bl_en_used      = 1
lcd_bl_en           = port:PE12<1><0><default><1>
lcd_power           = port:PA00<1><0><default><1>

lcdd3               = port:PD01<2><0><default><default>
lcdd4               = port:PD02<2><0><default><default>
lcdd5               = port:PD03<2><0><default><default>
lcdd6               = port:PD04<2><0><default><default>
lcdd7               = port:PD05<2><0><default><default>
lcdd10              = port:PD06<2><0><default><default>
lcdd11              = port:PD07<2><0><default><default>
lcdd12              = port:PD08<2><0><default><default>
lcdd13              = port:PD09<2><0><default><default>
lcdd14              = port:PD10<2><0><default><default>
lcdd15              = port:PD11<2><0><default><default>
lcdd19              = port:PD13<2><0><default><default>
lcdd20              = port:PD14<2><0><default><default>
lcdd21              = port:PD15<2><0><default><default>
lcdd22              = port:PD16<2><0><default><default>
lcdd23              = port:PD17<2><0><default><default>
lcdclk              = port:PD18<2><0><default><default>
lcdde               = port:PD19<2><0><default><default>
;lcdhsync            = port:PD20<2><0><default><default>
;lcdvsync            = port:PD21<2><0><default><default>


;----------------------------------------------------------------------------------
;pwm config
;----------------------------------------------------------------------------------
[pwm0_para]
pwm_used            = 0
pwm_positive        = port:PH00<2><0><default><default>

[pwm1_para]
pwm_used            = 0
pwm_positive        = port:PH01<2><0><default><default>

;--------------------------------------------------------------------------------
;vip (video input port) configuration
;vip(x)_used: 0:disable 1:enable
;vip(x)_isp_used 0:not use isp 1:use isp
;vip(x)_fmt: 0:yuv 1:bayer raw rgb
;vip(x)_stby_mode: 0:not shut down power at standby 1:shut down power at standby
;vip(x)_vflip: flip in vertical direction 0:disable 1:enable
;vip(x)_hflip: flip in horizontal direction 0:disable 1:enable
;vip(x)_iovdd: camera module io power handle string, pmu power supply
;vip(x)_iovdd_vol: camera module io power voltage, pmu power supply
;vip(x)_avdd:   camera module analog power handle string, pmu power supply
;vip(x)_avdd_vol:       camera module analog power voltage, pmu power supply
;vip(x)_dvdd:   camera module core power handle string, pmu power supply
;vip(x)_dvdd_vol:       camera module core power voltage, pmu power supply
;vip(x)_afvdd:  camera module vcm power handle string, pmu power supply
;vip(x)_afvdd_vol:      camera module vcm power voltage, pmu power supply
;fill voltage in uV, e.g. iovdd = 2.8V, vip_devx_iovdd_vol = 2800000
;fill handle string as below:
;axp22_eldo3
;axp22_dldo4
;axp22_eldo2
;fill handle string "" when not using any pmu power supply
;--------------------------------------------------------------------------------

[vip0]
vip0_used                = 0
vip0_csi_pck             = port:PE00<2><default><default><default>
vip0_csi_mck             = port:PE01<2><0><1><0>
vip0_csi_hsync           = port:PE02<2><default><default><default>
vip0_csi_vsync           = port:PE03<2><default><default><default>
vip0_csi_d0              = port:PE04<2><default><default><default>
vip0_csi_d1              = port:PE05<2><default><default><default>
vip0_csi_d2              = port:PE06<2><default><default><default>
vip0_csi_d3              = port:PE07<2><default><default><default>
vip0_csi_d4              = port:PE08<2><default><default><default>
vip0_csi_d5              = port:PE09<2><default><default><default>
vip0_csi_d6              = port:PE10<2><default><default><default>
vip0_csi_d7              = port:PE11<2><default><default><default>
vip_csi_sck              = port:PE12<2><default><default><default>
vip_csi_sda              = port:PE13<2><default><default><default>

vip0_mname           = "ov5640"
vip0_twi_addr        = 0x78
vip0_isp_used        = 1
vip0_fmt             = 0
vip0_stby_mode       = 0
vip0_vflip           = 0
vip0_hflip           = 0
vip0_iovdd           = "axp22_eldo3"
vip0_iovdd_vol       = 2800000
vip0_avdd            = "axp22_dldo4"
vip0_avdd_vol        = 2800000
vip0_dvdd            = "axp22_eldo2"
vip0_dvdd_vol        = 1500000
vip0_afvdd           = ""
vip0_afvdd_vol       = 2800000
vip0_power_en        =
vip0_reset           = port:PE16<1><0><1><0>
vip0_pwdn            = port:PE17<1><0><1><0>
vip0_flash_en        =
vip0_flash_mode      =
vip0_af_pwdn         =

;--------------------------------------------------------------------------------
;tv configuration
;
;--------------------------------------------------------------------------------
[tvout_para]
tvout_used          = 0
tvout_channel_num   = 1
tv_en               = port:PE2<1><default><default><0>

[tvin_para]
tvin_used           = 1
tvin_channel_num    = 1

; ------------------------------------------------------------------------------|
; de-interlace configuration
;--------------------------------------------------------------------------------
[di]
di_used             = 0

;--------------------------------------------------------------------------------
;   SDMMC PINS MAPPING                                                          |
; ------------------------------------------------------------------------------|
;   Config Guide                                                                |
;   sdc_used: 1-enable card, 0-disable card                                     |
;   sdc_detmode: card detect mode                                               |
;                1-detect card by gpio polling                                  |
;                2-detect card by gpio irq(must use IO with irq function)       |
;                3-no detect, always in for boot card                           |
;                4-manually insert and remove by /proc/driver/sunxi-mmc.x/insert|
;   sdc_buswidth: card bus width, 1-1bit, 4-4bit, 8-8bit                        |
;   sdc_use_wp: 1-with write protect IO, 0-no write protect IO                  |
;   sdc_isio: for sdio card                                                     |
;   sdc_regulator: power control.if card supports UHS-I/DDR and HS200 timing for|
;                  SD3.0 or eMMC4.5, regulator must be configured. the value is |
;                  the ldo name of AXP221, eg: sdc_regulator = "axp22_eldo2"    |
;   other: GPIO Mapping configuration                                           |
; ------------------------------------------------------------------------------|
;   Note:                                                                       |
;   1 if detmode=2, sdc_det's config=6                                          |
;     else if detmode=1, sdc_det's config=0                                     |
;     else sdc_det IO is not necessary                                          |
;   2 if the customer wants to support UHS-I and HS200 features, he must provide|
;     an independent power supply for the card. This is only used in platforms  |
;     that supports SD3.0 cards and eMMC4.4+ flashes                            |
;--------------------------------------------------------------------------------
[sdc0]
sdc0_used          = 0
sdc0_detmode       = 4
sdc0_buswidth      = 4
sdc0_d1            = port:PF00<2><1><2><default>
sdc0_d0            = port:PF01<2><1><2><default>
sdc0_clk           = port:PF02<2><1><2><default>
sdc0_cmd           = port:PF03<2><1><2><default>
sdc0_d3            = port:PF04<2><1><2><default>
sdc0_d2            = port:PF05<2><1><2><default>
sdc0_det           = port:PA01<0><1><2><default>
sdc0_use_wp        = 0
sdc0_wp            =
sdc0_isio          = 0
sdc0_regulator     = "none"

[sdc1]
sdc1_used          = 0
sdc1_detmode       = 4
sdc1_buswidth      = 1
sdc1_clk           = port:PC00<3><1><2><default>
sdc1_cmd           = port:PC01<3><1><2><default>
sdc1_d0            = port:PC02<3><1><2><default>
sdc1_det           =
sdc1_use_wp        = 0
sdc1_wp            =
sdc1_isio          = 1
sdc1_regulator     = "none"

; ------------------------------------------------------------------------------|
; sim card configuration
;--------------------------------------------------------------------------------
[smc]
smc_used            =
smc_rst             =
smc_vppen           =
smc_vppp            =
smc_det             =
smc_vccen           =
smc_sck             =
smc_sda             =

;--------------------------------
;[usbc0]：控制器0的配置。
;usb_used：USB使能标志。置1，表示系统中USB模块可用,置0,则表示系统USB禁用。
;usb_port_type：USB端口的使用情况。 0：device only;1：host only;2：OTG
;usb_detect_type：USB端口的检查方式。0：不做检测;1：vbus/id检查;2：id/dpdm检查
;usb_id_gpio：USB ID pin脚配置。具体请参考gpio配置说明。
;usb_det_vbus_gpio：USB DET_VBUS pin脚配置。具体请参考gpio配置说明。
;usb_drv_vbus_gpio：USB DRY_VBUS pin脚配置。具体请参考gpio配置说明。
;usb_det_vbus_gpio: "axp_ctrl",表示axp 提供
;--------------------------------
;--------------------------------
;---       USB0控制标志
;--------------------------------
[usbc0]
usbc0_used          = 1
usb_port_type       = 2
usb_detect_type     = 2
usb_id_gpio         = port:PE02<0><1><default><default>
;usb_det_vbus_gpio   = "axp_ctrl"
;usb_drv_vbus_gpio   = port:PB07<1><0><default><0>
usb_host_init_state = 1
usb_regulator_io    = "nocare"
usb_regulator_vol   = 0
;usb_wakeup_suspend  = 0
;---       USB Device
;usb_luns            = 3
;usb_serial_unique   = 0
;usb_serial_number   = "20080411"

;--------------------------------
;---       USB1控制标志
;--------------------------------
;[usbc1]
;usbc1_used          = 0
;usb_drv_vbus_gpio   = port:PB06<1><0><default><0>
;usb_host_init_state = 1
;usb_regulator_io    = "nocare"
;usb_regulator_vol   = 0
;usb_wakeup_suspend  = 0

;--------------------------------------------------------------------------------
; G sensor configuration
; gs_twi_id     ---  TWI ID for controlling Gsensor (0: TWI0, 1: TWI1, 2: TWI2)
;--------------------------------------------------------------------------------
[gsensor_para]
gsensor_used        = 0
gsensor_twi_id      = 2
gsensor_twi_addr    = 0x18
gsensor_int1        = port:PA09<6><1><default><default>
gsensor_int2        =

;--------------------------------------------------------------------------------
; gps gpio configuration
; gps_spi_id            --- the index of SPI controller. 0: SPI0, 1: SPI1, 2: SPI2, 15: no SPI used
; gps_spi_cs_num        --- the chip select number of SPI controller. 0: SPI CS0, 1: SPI CS1
; gps_lradc                     --- the lradc number for GPS used. 0 and 1 is valid, set 2 if not use lradc
;--------------------------------------------------------------------------------
[gps_para]

;--------------------------------------------------------------------------------
;wifi configuration
;wifi_sdc_id    ---  0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3
;wifi_usbc_id  ---  0- USB0, 1- USB1, 2- USB2
;wifi_mod_sel   ---  0- none, 1- bcm40181, 2- bcm40183(wifi+bt),
;                    3 - rtl8723as(wifi+bt), 4- rtl8189es(SM89E00),
;                    5 - rtl8192cu, 6 - rtl8188eu
;--------------------------------------------------------------------------------
[wifi_para]
wifi_used          = 0
wifi_sdc_id        = 1
wifi_usbc_id       = 1
wifi_usbc_type     = 1
wifi_mod_sel       = 3
wifi_power         = "axp22_aldo1"

; 1 - bcm40181 sdio wifi gpio config
;bcm40181_vdd_en        = port:PG18<1><default><default><0>
;bcm40181_vcc_en        = port:PG18<1><default><default><0>
;bcm40181_shdn          = port:PG10<1><default><default><0>
;bcm40181_host_wake     = port:PG12<0><default><default><0>

; 2 - bcm40183 sdio wifi gpio config
;bcm40183_vdd_en        = port:PG18<1><default><default><0>
;bcm40183_vcc_en        = port:PG18<1><default><default><0>
;bcm40183_wl_regon      = port:PG10<1><default><default><0>
;bcm40183_wl_host_wake  = port:PG12<0><default><default><0>
;bcm40183_bt_rst        = port:PG11<1><default><default><0>
;bcm40183_bt_regon      = port:PG11<1><default><default><0>
;bcm40183_bt_wake       = port:XXX<1><default><default><0>
;bcm40183_bt_host_wake  = port:XXX<0><default><default><0>

; 3 - rtl8723as sdio wifi + bt gpio config
;rtk_rtl8723as_wl_dis       = port:PG10<1><default><default><0>
;rtk_rtl8723as_bt_dis       = port:PG11<1><default><default><0>
;rtk_rtl8723as_wl_host_wake = port:PG12<0><default><default><0>
;rtk_rtl8723as_bt_host_wake = port:PG17<0><default><default><0>

; 4 - rtl8189es sdio wifi gpio config
;rtl8189es_vdd_en       = port:PG18<1><default><default><0>
;rtl8189es_vcc_en       = port:PG18<1><default><default><0>
;rtl8189es_shdn         = port:PG10<1><default><default><0>
;rtl8189es_wakeup       = port:PG12<1><default><default><1>

; 5 - rtl8192cu usb wifi gpio config
;rtl8192cu_power    = port:PH27<1><0><default><0>

; 6 - rtl8188eu usb wifi gpio conifg
;rtl8188eu_power    = port:PH27<1><0><default><0>

;--------------------------------------------------------------------------------
;gyroscope
;--------------------------------------------------------------------------------
[gy_para]
gy_used             = 0
gy_twi_id           = 2
gy_twi_addr         = 0x6a
gy_int1             = port:PA10<6><1><default><default>
gy_int2             =

;--------------------------------------------------------------------------------
;light sensor
;--------------------------------------------------------------------------------
[ls_para]
ls_used             = 0
ls_twi_id           = 2
ls_twi_addr         = 0x23
ls_int              = port:PA12<6><1><default><default>

;--------------------------------------------------------------------------------
;compass
;--------------------------------------------------------------------------------
[compass_para]
compass_used        = 0
compass_twi_id      = 2
compass_twi_addr    = 0x0d
compass_int         = port:PA11<6><1><default><default>

;--------------------------------------------------------------------------------
;blue tooth
;bt_used                        ---- blue tooth used (0- no used, 1- used)
;bt_uard_id                     ---- uart index
;--------------------------------------------------------------------------------
[bt_para]
bt_used             =
bt_uart_id          =
bt_wakeup           =
bt_gpio             =
bt_rst              =
;--------------------------------------------------------------------------------
;               NOTE :Make sure spdif_used = 0x1,spdifmach_used = 0x1,
;         if register the sound card spdif.
;--------------------------------------------------------------------------------
[audiospdif]
audiospdif_used          = 0
[spdif_machine]
spdif_machine_used   = 0
;----------------------------------------------------------------------------------
;               NOTE :Make sure hdmi_used = 0x1,hdmimach_used = 0x1,
;         if register the sound card hdmi.
;---------------------------------------------------------------------------------
[audiohdmi]
audiohdmi_used = 0
[hdmi_machine]
hdmi_machine_used = 0
;--------------------------------------------------------------------------------
;allwinner,pcm_lrck_period      :16/32/64/128/256
;allwinner,pcm_lrckr_period :no use
;allwinner,slot_width_select    :16bits/20bits/24bits/32bits
;allwinner,pcm_lsb_first        :0: msb first; 1: lsb first
;allwinner,tx_data_mode         :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
;allwinner,rx_data_mode         :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
;allwinner,daudio_master :1: SND_SOC_DAIFMT_CBM_CFM(codec clk & FRM master)        use
;                                                 2: SND_SOC_DAIFMT_CBS_CFM(codec clk slave & FRM master)  not use
;                                                 3: SND_SOC_DAIFMT_CBM_CFS(codec clk master & frame slave) not use
;                                                 4: SND_SOC_DAIFMT_CBS_CFS(codec clk & FRM slave)         use
;allwinner,audio_format: 1:SND_SOC_DAIFMT_I2S(standard i2s format).            use
;                          2:SND_SOC_DAIFMT_RIGHT_J(right justfied format).
;                          3:SND_SOC_DAIFMT_LEFT_J(left justfied format)
;                          4:SND_SOC_DAIFMT_DSP_A(pcm. MSB is available on 2nd BCLK rising edge after LRC rising edge). use
;                          5:SND_SOC_DAIFMT_DSP_B(pcm. MSB is available on 1nd BCLK rising edge after LRC rising edge)
;allwinner,signal_inversion:1:SND_SOC_DAIFMT_NB_NF(normal bit clock + frame)  use
;                                 2:SND_SOC_DAIFMT_NB_IF(normal BCLK + inv FRM)
;                                 3:SND_SOC_DAIFMT_IB_NF(invert BCLK + nor FRM)  use
;                                 4:SND_SOC_DAIFMT_IB_IF(invert BCLK + FRM)
;allwinner,frametype :0: long frame = 2 clock width;  1: short frame
;allwinner,tdm_config :0:pcm 1:i2s
;allwinner,daudio0_used :0:not use 1:use
;-------------------------------------------------------------------------------
;               NOTE :Make sure daudio0mach_used = 0x1,daudio0_used = 0x1,
;         if register the sound card DAUDIO0.
;--------------------------------------------------------------------------------
;[daudio0_machine]
;daudio0_machine_used = 0
;-----------------------------------------------------------------------------
;[daudio0]
;pcm_lrck_period =   0x20
;pcm_lrckr_period =   0x01
;slot_width_select =   0x10
;pcm_lsb_first =   0x0
;tx_data_mode =   0x0
;rx_data_mode =   0x0
;daudio_master =   0x04
;audio_format =   0x01
;signal_inversion =   0x01
;frametype =   0x0
;tdm_config =   0x01
;daudio0_used = 0

;--------------------------------------------------------------------------------------
;allwinner,headphonevol :headphone volume:0x0--0x3f 0db--(-62db) 1db/step
;allwinner,spkervol : speaker volume:0x0--0x1f 0db-(-43.5db) 1.5db/step
;allwinner,earpiecevol : earpiece volume:0x0--0x1f 0db-(-43.5db) 1.5db/step
;allwinner,maingain :   mainmic gain:0x0---0x7 0x0-0db 0x1:24db   3db/step
;allwinner,headsetmicgain : headphonemic gain:0x0---0x7 0x0-0db 0x1:24db   3db/step
;allwinner,adcagc_cfg : 1:use adcagc 0:no use
;allwinner,adcdrc_cfg : 1:use adcdrc 0:no use
;allwinner,adchpf_cfg : 1:use adchpf 0:no use
;allwinner,dacdrc_cfg : 1:use adcdrc 0:no use
;allwinner,dachpf_cfg : 1:use adchpf 0:no use
;allwinner,aif2config : 1:use aif2 0:no use
;allwinner,aif3config : 1:use aif3 0:no use
;--------------------------------------------------------------------------------
;               NOTE :Make sure audiocodec_machine_used = 0x1,sun50i2s_used = 0x1
;         sun50codec_used = 0x1,if register the sound card audiocodec.
;---------------------------------------------------------------------------------
;[audiocodec_machine]
;audiocodec_machine_used = 0

;-------------------------------------------------------------------------------------
;used                        ---0:not used,1:used
;pmu_id                      ---0:axp19x,1:axp209,2:axp22x,3:axp806,4:axp808,5:axp809,6:axp803,7:axp813
;pmu_twi_addr                ---slave address
;pmu_twi_id                  ---i2c bus number (0 TWI0, 1 TWI2, 2 TWI3)
;pmu_irq_id                   ---irq number (0 irq0,1 irq1)
;pmu_chg_ic_temp             ---intelligence charge pmu temperature. when it is 0, this function is closed.
;pmu_battery_rdc             ---battery initial resistance
;pmu_battery_cap             ---battery capability,mAh
;pmu_runtime_chgcur          ---set initial charging current limite,mA, 300/450/600/750/900/1050/1200/1350/1500/1650/1800/1950/
;pmu_suspend_chgcur          ---set suspend charging current limite,mA, 300/450/600/750/900/1050/1200/1350/1500/1650/1800/1950/
;pmu_shutdown_chgcur         ---set shutdown charging current limite,mA, 300/450/600/750/900/1050/1200/1350/1500/1650/1800/1950/
;pmu_init_chgvol             ---set initial charing target voltage,mV,4100/4220/4200/4240
;pmu_ac_vol                  ---set usb-ac limited voltage level,mV,4000/4100/4200/4300/4400/4500/4600/4700,0 - not limite
;pmu_ac_cur                  ---set usb-ac limited current level,mA,500/900, 0 - not limite
;pmu_usbpc_vol               ---set usb-pc limited voltage level,mV,4000/4100/4200/4300/4400/4500/4600/4700,0 - not limite
;pmu_usbpc_cur               ---set usb-pc limited current level,mA,500/900, 0 - not limite
;pmu_battery_warning_level1  ---low power warning high level,5%-20%,1%/step
;pmu_battery_warning_level2  ---low power warning low level,0%-15%,1%/step
;pmu_chgled_func             ---CHGKED pin control, 0:controlled by pmu,1:controlled by Charger
;pmu_chgled_type             ---CHGLED Type select when pmu_chgled_func=0,0:Type A, 1:type B
;pmu_bat_para1               ---battery indication at 3.13V
;pmu_bat_para2               ---battery indication at 3.27V
;pmu_bat_para3               ---battery indication at 3.34V
;pmu_bat_para4               ---battery indication at 3.41V
;pmu_bat_para5               ---battery indication at 3.48V
;pmu_bat_para6               ---battery indication at 3.52V
;pmu_bat_para7               ---battery indication at 3.55V
;pmu_bat_para8               ---battery indication at 3.57V
;pmu_bat_para9               ---battery indication at 3.59V
;pmu_bat_para10              ---battery indication at 3.61V
;pmu_bat_para11              ---battery indication at 3.63V
;pmu_bat_para12              ---battery indication at 3.64V
;pmu_bat_para13              ---battery indication at 3.66V
;pmu_bat_para14              ---battery indication at 3.7V
;pmu_bat_para15              ---battery indication at 3.73V
;pmu_bat_para16              ---battery indication at 3.77V
;pmu_bat_para17              ---battery indication at 3.78V
;pmu_bat_para18              ---battery indication at 3.8V
;pmu_bat_para19              ---battery indication at 3.82V
;pmu_bat_para20              ---battery indication at 3.84V
;pmu_bat_para21              ---battery indication at 3.85V
;pmu_bat_para22              ---battery indication at 3.87V
;pmu_bat_para23              ---battery indication at 3.91V
;pmu_bat_para24              ---battery indication at 3.94V
;pmu_bat_para25              ---battery indication at 3.98V
;pmu_bat_para26              ---battery indication at 4.01V
;pmu_bat_para27              ---battery indication at 4.05V
;pmu_bat_para28              ---battery indication at 4.08V
;pmu_bat_para29              ---battery indication at 4.1V
;pmu_bat_para30              ---battery indication at 4.12V
;pmu_bat_para31              ---battery indication at 4.14V
;pmu_bat_para32              ---battery indication at 4.15V
;pmu_bat_temp_enable         ---battery temp detect enable
;pmu_bat_charge_ltf          ---charge battery temp low threshold voltage
;pmu_bat_charge_htf          ---charge battery temp high threshold voltage
;pmu_bat_shutdown_ltf        ---shutdown battery temp low threshold voltage
;pmu_bat_shutdown_htf        ---shutdown battery temp high threshold voltage
;pmu_bat_temp_para1          ---battery temp -25 voltage
;pmu_bat_temp_para2          ---battery temp -15 voltage
;pmu_bat_temp_para3          ---battery temp -10 voltage
;pmu_bat_temp_para4          ---battery temp -5  voltage
;pmu_bat_temp_para5          ---battery temp  0  voltage
;pmu_bat_temp_para6          ---battery temp  5  voltage
;pmu_bat_temp_para7          ---battery temp  10 voltage
;pmu_bat_temp_para8          ---battery temp  20 voltage
;pmu_bat_temp_para9          ---battery temp  30 voltage
;pmu_bat_temp_para10         ---battery temp  40 voltage
;pmu_bat_temp_para11         ---battery temp  45 voltage
;pmu_bat_temp_para12         ---battery temp  50 voltage
;pmu_bat_temp_para13         ---battery temp  55 voltage
;pmu_bat_temp_para14         ---battery temp  60 voltage
;pmu_bat_temp_para15         ---battery temp  70 voltage
;pmu_bat_temp_para16         ---battery temp  80 voltage
;pmu_powkey_off_time         ---set pek off time,ms, 4000/6000/8000/10000
;pmu_powkey_off_func         ---set pek off func, 0:shutdown,1:restart
;pmu_powkey_off_en           ---set pek offlevel powerdown or not, 0:not powerdown,1:powerdown
;pmu_powkey_long_time        ---set pek pek long irq time,ms,1000/1500/2000/2500
;pmu_powkey_on_time          ---set pek on time,ms,128/1000/2000/3000
;--------------------------------------------------------------------------------------------------------
;--------------------------------------------------------------------------------------------------------
;pmu0 is axp81x
;--------------------------------------------------------------------------------------------------------
[pmu0]
used                       = 0
pmu_id                     = 6
pmu_twi_addr               = 0x34
pmu_twi_id                 = 1
pmu_irq_id                 = 0

pmu_chg_ic_temp            = 0
pmu_battery_rdc            = 100
pmu_battery_cap            = 0
pmu_runtime_chgcur         = 450
pmu_suspend_chgcur         = 1500
pmu_shutdown_chgcur        = 1500
pmu_init_chgvol            = 4200
pmu_ac_vol                 = 4000
pmu_ac_cur                 = 0
pmu_usbpc_vol              = 4400
pmu_usbpc_cur              = 500
pmu_battery_warning_level1 = 15
pmu_battery_warning_level2 = 0
pmu_chgled_func            = 0
pmu_chgled_type            = 0

pmu_bat_para1              = 0
pmu_bat_para2              = 0
pmu_bat_para3              = 0
pmu_bat_para4              = 0
pmu_bat_para5              = 0
pmu_bat_para6              = 0
pmu_bat_para7              = 0
pmu_bat_para8              = 0
pmu_bat_para9              = 5
pmu_bat_para10             = 8
pmu_bat_para11             = 9
pmu_bat_para12             = 10
pmu_bat_para13             = 13
pmu_bat_para14             = 16
pmu_bat_para15             = 20
pmu_bat_para16             = 33
pmu_bat_para17             = 41
pmu_bat_para18             = 46
pmu_bat_para19             = 50
pmu_bat_para20             = 53
pmu_bat_para21             = 57
pmu_bat_para22             = 61
pmu_bat_para23             = 67
pmu_bat_para24             = 73
pmu_bat_para25             = 78
pmu_bat_para26             = 84
pmu_bat_para27             = 88
pmu_bat_para28             = 92
pmu_bat_para29             = 93
pmu_bat_para30             = 94
pmu_bat_para31             = 95
pmu_bat_para32             = 100

pmu_bat_temp_enable        = 0
pmu_bat_charge_ltf         = 2261
pmu_bat_charge_htf         = 388
pmu_bat_shutdown_ltf       = 3200
pmu_bat_shutdown_htf       = 237
pmu_bat_temp_para1         = 7466
pmu_bat_temp_para2         = 4480
pmu_bat_temp_para3         = 3518
pmu_bat_temp_para4         = 2786
pmu_bat_temp_para5         = 2223
pmu_bat_temp_para6         = 1788
pmu_bat_temp_para7         = 1448
pmu_bat_temp_para8         = 969
pmu_bat_temp_para9         = 664
pmu_bat_temp_para10        = 466
pmu_bat_temp_para11        = 393
pmu_bat_temp_para12        = 333
pmu_bat_temp_para13        = 283
pmu_bat_temp_para14        = 242
pmu_bat_temp_para15        = 179
pmu_bat_temp_para16        = 134

pmu_powkey_off_time        = 6000
pmu_powkey_off_func        = 0
pmu_powkey_off_en          = 1
pmu_powkey_long_time       = 1500
pmu_powkey_on_time         = 1000

;--------------------------------------------------------------------------------------------------------
;pmu0 is axp81x
;regulator tree
;--------------------------------------------------------------------------------------------------------
[pmu0_regu]
regulator_count = 23
regulator1                   = "axp28_rtc"
regulator2                   = "axp28_aldo1"
regulator3                   = "axp28_aldo2"
regulator4                   = "axp28_aldo3"
regulator5                   = "axp28_dldo1"
regulator6                   = "axp28_dldo2"
regulator7                   = "axp28_dldo3"
regulator8                   = "axp28_dldo4"
regulator9                   = "axp28_eldo1"
regulator0                   = "axp28_eldo2"
regulator11                  = "axp28_eldo3"
regulator12                  = "axp28_fldo1"
regulator13                  = "axp28_fldo2"
regulator14                  = "axp28_dcdc1"
regulator15                  = "axp28_dcdc2"
regulator16                  = "axp28_dcdc3"
regulator17                  = "axp28_dcdc4"
regulator18                  = "axp28_dcdc5"
regulator19                  = "axp28_dcdc6"
regulator20                  = "axp28_dcdc7"
regulator21                  = "axp28_gpio0ldo"
regulator22                  = "axp28_gpio1ldo"

;----------------------------------------------------------------------------------
; dvfs voltage-frequency table configuration
;
; max_freq: cpu maximum frequency, based on Hz
; min_freq: cpu minimum frequency, based on Hz
;
; LV_count: count of LV_freq/LV_volt, must be < 16
;
; LV1: core vdd is 1.50v if cpu frequency is (1344Mhz,  1536Mhz]
; LV2: core vdd is 1.46v if cpu frequency is (1200Mhz,  1344Mhz]
; LV3: core vdd is 1.32v if cpu frequency is (1008Mhz,  1200Mhz]
; LV4: core vdd is 1.20v if cpu frequency is (816Mhz,   1008Mhz]
; LV5: core vdd is 1.10v if cpu frequency is (648Mhz,    816Mhz]
; LV6: core vdd is 1.04v if cpu frequency is (120Mhz,    648Mhz]
; LV7: core vdd is 1.04v if cpu frequency is (120Mhz,    648Mhz]
; LV8: core vdd is 1.04v if cpu frequency is (120Mhz,    648Mhz]
;
;----------------------------------------------------------------------------------
[dvfs_table]
;extremity_freq = 1344000000
max_freq = 1200000000
min_freq = 480000000

LV_count = 8

LV1_freq = 1536000000
LV1_volt = 1500

LV2_freq = 1344000000
LV2_volt = 1460

LV3_freq = 1200000000
LV3_volt = 1320

LV4_freq = 1008000000
LV4_volt = 1200

LV5_freq = 816000000
LV5_volt = 1100

LV6_freq = 648000000
LV6_volt = 1040

LV7_freq = 0
LV7_volt = 1040

LV8_freq = 0
LV8_volt = 1040

;----------------------------------------------------------------------------------
;virtual device
;virtual device for pinctrl testing
;device have pin PA1 PA2
;----------------------------------------------------------------------------------
[Vdevice]
Vdevice_used        = 0
Vdevice_0           = port:PB01<4><1><2><default>
Vdevice_1           = port:PB02<4><1><2><default>

这是我的 sys_config.fex, 你对比一下.

晕哥 · 2018-10-08 20:25:53

asdf 说：

我替换了sys_config也没出fb0,配置了一通多了个disp设备，晕哥有时间可否分享下你的.config，不行我再清理干净从新走一遍看看~

现在在外面，晚点或者明天我传上来。

晕哥 · 2018-10-09 09:12:09

#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 3.10.65 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_NEED_MACH_IO_H=y
CONFIG_NEED_MACH_MEMORY_H=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="C600"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_FHANDLE=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_STALL_COMMON is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
CONFIG_UIDGID_CONVERTED=y
# CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_HOTPLUG=y
CONFIG_PANIC_TIMEOUT=0
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_FREEZER=y

#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_MULTIPLATFORM is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_SUNXI=y
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P64X0 is not set
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP1 is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_SUN8I is not set
# CONFIG_ARCH_SUN9I is not set
CONFIG_ARCH_SUNIV=y
CONFIG_ARCH_SUNIVW1=y
CONFIG_ARCH_SUNIVW1P1=y
# CONFIG_FPGA_V4_PLATFORM is not set
# CONFIG_FPGA_V7_PLATFORM is not set
CONFIG_EVB_PLATFORM=y
# CONFIG_SUNXI_TRUSTZONE is not set
# CONFIG_HOMLET_PLATFORM is not set

#
# Processor Type
#
CONFIG_CPU_ARM926T=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5TJ=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_USE_DOMAINS=y

#
# Processor Features
#
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
CONFIG_CPU_DCACHE_WRITETHROUGH=y
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
CONFIG_NEED_KUSER_HELPERS=y
CONFIG_KUSER_HELPERS=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_NR_BANKS=8
CONFIG_MULTI_IRQ_HANDLER=y

#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCCARD is not set

#
# Kernel Features
#
# CONFIG_DISABLE_CPU_SCHED_DOMAIN_BALANCE is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_ARCH_NR_GPIO=288
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
# CONFIG_HIGHMEM is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_ARM_FLUSH_CONSOLE_ON_RESTART=y

#
# Boot options
#
CONFIG_USE_OF=y
CONFIG_ATAGS=y
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
# CONFIG_BUILD_ARM_APPENDED_DTB_IMAGE is not set
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
# CONFIG_ARM_APPENDED_DTB is not set
CONFIG_CMDLINE="earlyprintk=sunxi-uart,0x01c25000 loglevel=8 initcall_debug=1 console=ttyS1 init=/init root=/dev/mtdblock2"
# CONFIG_CMDLINE_FROM_BOOTLOADER is not set
# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE_FORCE=y
# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
CONFIG_ATAGS_PROC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_AUTO_ZRELADDR is not set

#
# CPU Power Management
#

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set

#
# Floating point emulation
#

#
# At least one emulation must be selected
#
# CONFIG_FPE_NWFPE is not set
# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y

#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_COREDUMP is not set

#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HAS_WAKELOCK=y
# CONFIG_WAKELOCK is not set
# CONFIG_SCENELOCK is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_APM_EMULATION is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_CPU_PM=y
CONFIG_SUSPEND_TIME=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_NET_IP_TUNNEL is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_ANDROID_PARANOID_NETWORK is not set
CONFIG_NET_ACTIVITY_STATS=y
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
# CONFIG_NETLINK_DIAG is not set
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
# CONFIG_LIB80211 is not set
# CONFIG_CFG80211_ALLOW_RECONNECT is not set
# CONFIG_MAC80211 is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
# CONFIG_HAVE_CPU_AUTOPROBE is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
# CONFIG_DMA_SHARED_BUFFER is not set

#
# Bus devices
#
# CONFIG_ARM_CCI is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_M25P80=y
# CONFIG_M25PXX_USE_FAST_READ is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_NAND_IDS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set

#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_UBI is not set
CONFIG_DTC=y
CONFIG_OF=y

#
# Device Tree and Open Firmware support
#
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_OF_SELFTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_NET=y
CONFIG_OF_MTD=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_ATMEL_PWM is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_UID_STAT is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_SUNXI_RFKILL=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_MII is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
# CONFIG_ETHERNET is not set
# CONFIG_PHYLIB is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_WIFI_CONTROL_FUNC is not set
CONFIG_XR_WLAN=y
CONFIG_XRMAC=m
CONFIG_XRMAC_RC_DEFAULT="minstrel_ht"
# CONFIG_XRMAC_RC_PID is not set
CONFIG_XRMAC_RC_MINSTREL=y
CONFIG_XRMAC_RC_MINSTREL_HT=y
CONFIG_XRMAC_DEBUGFS=y
CONFIG_XRADIO=m
CONFIG_XRADIO_SDIO=y
CONFIG_XRADIO_NON_POWER_OF_TWO_BLOCKSIZES=y
CONFIG_XRADIO_USE_GPIO_IRQ=y
CONFIG_XRADIO_USE_EXTENSIONS=y
# CONFIG_XRADIO_SUSPEND_POWER_OFF is not set
# CONFIG_XRADIO_EXTEND_SUSPEND is not set

#
# Driver debug features
#
# CONFIG_XRADIO_DEBUG is not set
# CONFIG_ATH_CARDS is not set
# CONFIG_BCMDHD is not set
# CONFIG_BRCMFMAC is not set
# CONFIG_HOSTAP is not set
# CONFIG_LIBERTAS is not set
# CONFIG_WL_TI is not set
# CONFIG_MWIFIEX is not set
# CONFIG_RTL8188EU is not set
# CONFIG_RTL8723BS is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_KEYRESET is not set
# CONFIG_INPUT_KEYCOMBO is not set
# CONFIG_INPUT_SW_DEVICE is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_KEYBOARD_SUNXI=y
CONFIG_WIRELESS_KEY=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_INPUT_SENSOR is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_SERIAL_SUNXI=y
CONFIG_SERIAL_SUNXI_CONSOLE=y
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_DEBUG is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_DCC_TTY is not set
# CONFIG_SUNXI_DMA_TEST is not set
# CONFIG_SUNXI_SCR is not set
# CONFIG_SUNXI_DI is not set
CONFIG_DUMP_REG=y
CONFIG_DUMP_REG_MISC=y
# CONFIG_SUNXI_TRANSFORM is not set
CONFIG_SUNXI_SYS_INFO=y
# CONFIG_SUNXI_TIMER_TEST is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SUNXI is not set
CONFIG_I2C_SUNIV=y
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_SC18IS602 is not set
CONFIG_SPI_SUNXI=y
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set

#
# Qualcomm MSM SSBI bus support
#
# CONFIG_SSBI is not set
# CONFIG_HSI is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_PINCTRL=y

#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_SINGLE is not set
# CONFIG_PINCTRL_EXYNOS is not set
# CONFIG_PINCTRL_EXYNOS5440 is not set

#
# Allwinner SOC PINCTRL DRIVER
#
CONFIG_PINCTRL_SUNXI_COMMON=y
# CONFIG_PINCTRL_SUNXI_TEST is not set
# CONFIG_PINCTRL_SUN4I_A10 is not set
# CONFIG_PINCTRL_SUN5I_A10S is not set
# CONFIG_PINCTRL_SUN5I_A13 is not set
# CONFIG_PINCTRL_SUN6I_A31 is not set
# CONFIG_PINCTRL_SUN7I_A20 is not set
# CONFIG_PINCTRL_SUN8I_A23 is not set
# CONFIG_PINCTRL_SUN8IW10P1 is not set
# CONFIG_PINCTRL_SUN50IW1P1 is not set
# CONFIG_PINCTRL_SUN50IW1P1_R is not set
CONFIG_PINCTRL_SUNIVW1P1=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_TS5500 is not set
# CONFIG_GPIO_GRGPIO is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set

#
# PCI GPIO expanders:
#

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#

#
# USB GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_POWER_AVS is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_VEXPRESS_CONFIG is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
# CONFIG_TTPCI_EEPROM is not set

#
# Media drivers
#
CONFIG_RC_CORE=y
# CONFIG_RC_MAP is not set
CONFIG_RC_DECODERS=y
# CONFIG_LIRC is not set
CONFIG_IR_NEC_DECODER=y
# CONFIG_IR_RC5_DECODER is not set
# CONFIG_IR_RC6_DECODER is not set
# CONFIG_IR_JVC_DECODER is not set
# CONFIG_IR_SONY_DECODER is not set
# CONFIG_IR_RC5_SZ_DECODER is not set
# CONFIG_IR_SANYO_DECODER is not set
# CONFIG_IR_MCE_KBD_DECODER is not set
CONFIG_RC_DEVICES=y
# CONFIG_RC_ATI_REMOTE is not set
# CONFIG_IR_IMON is not set
# CONFIG_IR_MCEUSB is not set
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_TTUSBIR is not set
# CONFIG_RC_LOOPBACK is not set
# CONFIG_IR_GPIO_CIR is not set
CONFIG_IR_SUNXI=y
# CONFIG_MEDIA_USB_SUPPORT is not set

#
# Supported MMC/SDIO adapters
#
# CONFIG_CYPRESS_FIRMWARE is not set

#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#

#
# Customise DVB Frontends
#
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
CONFIG_VIDEO_ENCODER_DECODER_SUNXI=y

#
# Graphics support
#
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#

#
# Video support for sunxi
#
CONFIG_SUNIV_FB=y
CONFIG_SUNXI_BOOT_COLORBAR=y
CONFIG_SUNIV_LCD=y
# CONFIG_SUNIV_HDMI is not set
# CONFIG_FB_ARMHDLCD is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_EXYNOS_VIDEO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# CONFIG_LOGO is not set
# CONFIG_FB_SSD1307 is not set
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_SND_SOC_DMAENGINE_PCM=y
# CONFIG_SND_ATMEL_SOC is not set
# CONFIG_SND_DESIGNWARE_I2S is not set
CONFIG_SND_SOC_SUNXI_RW=y
CONFIG_SND_SOC_SUNXI_AUDIO_DMA=y
CONFIG_SND_SOC_SUNXI_TDM=y
CONFIG_SND_SUNXI_SOC=y
CONFIG_SND_SOC_INTERNAL_SUNIVW1P1_AUDIOCODEC=y
CONFIG_SND_SOC_SUNIVW1P1_CODEC_CPU_DAI=y
CONFIG_SND_SOC_SUNIVW1P1_AUDIO_CODEC_MACHINE=y
CONFIG_SND_SOC_SUNIVW1P1_AUDIO_CODEC_MACHINE_I2S=y
CONFIG_SND_SOC_SUNIVW1P1_AUDIO_CODEC_MACHINE_STA33X=y
CONFIG_SND_SOC_SUNIVW1P1_CPU_DAUDIO=y
CONFIG_SND_SOC_DAUDIO_PLATFORM=y
# CONFIG_SND_SOC_VIRCODEC is not set
CONFIG_SND_SOC_DAUDIO0_MACHINE=y
# CONFIG_SND_SOC_DAUDIO1_MACHINE is not set
# CONFIG_SND_SOC_DMIC is not set
# CONFIG_SND_SOC_CS4385 is not set
# CONFIG_SND_SOC_DSD is not set
# CONFIG_SND_SUNXI_SOC_SPDIF is not set
# CONFIG_SUNXI_AUDIO_DEBUG is not set
CONFIG_SND_SOC_I2C_AND_SPI=y
# CONFIG_SND_SOC_ALL_CODECS is not set
# CONFIG_SND_SIMPLE_CARD is not set
# CONFIG_SOUND_PRIME is not set

#
# HID support
#
CONFIG_HID=y
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO_TPKBD is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_PS3REMOTE is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set

#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_EHCI_HCD_SYNOPSYS is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_SUNXI_HCD=y
CONFIG_USB_SUNXI_HCI=y
CONFIG_USB_SUNXI_EHCI0=y
CONFIG_USB_SUNXI_EHCI1=y
CONFIG_USB_SUNXI_OHCI0=y
CONFIG_USB_SUNXI_OHCI1=y
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_RENESAS_USBHS is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_CHIPIDEA is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_PHY is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FUSB300 is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_NET2272 is not set
CONFIG_USB_SUNXI_UDC0=y
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_G_ANDROID is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
CONFIG_USB_SUNXI=y
CONFIG_USB_SUNXI_USB=y
CONFIG_USB_SUNXI_USBC=y
CONFIG_USB_SUNXI_USB_MANAGER=y
CONFIG_USB_SUNXI_HCD0=y
CONFIG_USB_SUNXI_USB0_OTG=y
CONFIG_USB_SUNXI_USB_DEBUG=y
CONFIG_USB_SUNXI_USB_ADB=y
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
# CONFIG_MMC_CLKGATE is not set
# CONFIG_MMC_EMBEDDED_SDIO is not set
# CONFIG_MMC_PARANOID_SD_INIT is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_MMC_BLOCK_DEFERRED_RESUME is not set
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_SDHCI_PXAV3 is not set
# CONFIG_MMC_SDHCI_PXAV2 is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_DW is not set
CONFIG_MMC_SUNXI=y
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_SWITCH is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
# CONFIG_RTC_SHUTDOWN_ALARM is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_RX4581 is not set

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_DS2404 is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SUNXI is not set
# CONFIG_RTC_DRV_SNVS is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_DW_DMAC is not set
# CONFIG_TIMB_DMA is not set
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y

#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
CONFIG_SUNXI_DMA=y
# CONFIG_SUNXI_RDMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VIRT_DRIVERS is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_DEBUG is not set
# CONFIG_COMMON_CLK_SI5351 is not set

#
# SUNXI Clock Configuration
#
# CONFIG_SUNXI_CLK_DEFAULT_INIT is not set
# CONFIG_SUNXI_CLK_AHB_FROM_PLL6 is not set

#
# Hardware Spinlock drivers
#
# CONFIG_HWSPINLOCK_SUNXI is not set
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_MMIO=y
# CONFIG_SUN4I_TIMER is not set
CONFIG_SUNXI_TIMER=y
# CONFIG_ARM_ARCH_TIMER_EVTSTREAM is not set
# CONFIG_MAILBOX is not set
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_PWM is not set
CONFIG_IRQCHIP=y
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
# CONFIG_JFFS2_SUMMARY is not set
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_XATTR is not set
# CONFIG_SQUASHFS_ZLIB is not set
# CONFIG_SQUASHFS_LZO is not set
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set

#
# RCU Debugging
#
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_ARM_UNWIND is not set
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_RODATA is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_SUNXI_UART0 is not set
CONFIG_DEBUG_SUNXI_UART1=y
# CONFIG_DEBUG_LL_UART_NONE is not set
# CONFIG_DEBUG_ICEDCC is not set
# CONFIG_DEBUG_SEMIHOSTING is not set
CONFIG_DEBUG_LL_INCLUDE="debug/sunxi.S"
CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_CORESIGHT is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_RNG2=y
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA1_ARM is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_ARM is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
# CONFIG_XZ_DEC_BCJ is not set
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_LIBFDT=y
CONFIG_ARCH_HAS_SG_CHAIN=y
# CONFIG_VIRTUALIZATION is not set

上面这个是配置文件.

这几个开关影响LCD驱动:

CONFIG_SUNIV_FB=y
CONFIG_SUNXI_BOOT_COLORBAR=y
CONFIG_SUNIV_LCD=y

晕哥 · 2018-10-09 16:54:54

asdf 说：

终于把显示demo随机矩形跑起来了，特别感谢晕哥提供的.config,sys_config也可参照晕哥的，虽然晕哥强调那几个我都配了但可能还是其它一些未知的配置影响了；然后也给后面调试的朋友再指出两个可能遇到的坑，1.显示的PD7管脚跟daudio模块的管脚有冲突，可以在sunivw1p1.dtsi相关位置屏蔽；2.如果自己设计走线注意lcd_power管脚的正确性和开关逻辑！目前usb主从显示都通了，接下来再把触摸，串口调通~

恭喜恭喜！
然后组织给你摊派一个重要的任务，
把OTG切换的功能调通.

^_^

晕哥 · 2018-10-09 22:38:53

asdf 说：

otg软切目前倒是可用的，话说原理图上没有看到id脚呢

请教如何操作?

晕哥 · 2018-10-10 11:29:32

能软切也不错，有空我试一试.

asdf 说：

软切的话在/sys/devices/soc.0/usbc0.2/otg_role 这个文件，只需要echo usb_host 或者usb_devices就可以了，数字0，1，2应该也可以的
晕哥说：
asdf 说：
otg软切目前倒是可用的，话说原理图上没有看到id脚呢
请教如何操作?

晕哥 · 2018-10-10 15:21:15

asdf 说：

话说默认debug串口为uart1,改成uart0后直接烧录都不成功，可有什么好的方案呢，有人实现uart0 debug了么

你是如何改的呢？应该不存在烧录不成功的问题.

晕哥 · 2018-10-10 15:33:29

我记得貌似改过，有空我帮你试一试。

asdf 说：

就sys_config的uart_para段把debug port设置成0；再把对应的管脚改成PE1,PE0
晕哥说：
asdf 说：
话说默认debug串口为uart1,改成uart0后直接烧录都不成功，可有什么好的方案呢，有人实现uart0 debug了么
你是如何改的呢？应该不存在烧录不成功的问题.

晕哥 · 2018-10-10 16:15:48

asdf 说：

好的，uart1这两个管脚跟触摸冲突了

PA2, PA3确实共用了 UART1 和 RTP.

晕哥 · 2018-10-28 10:36:01

上面已经提示了，运行:

apt-get update

晕哥 · 2018-10-28 11:21:20

https://askubuntu.com/questions/186847/error-gnutls-handshake-failed-when-connecting-to-https-servers

可能系统缺什么库，你看下这个链接。

晕哥 · 2018-10-29 08:24:37

https://whycan.cn/t_1299.html
https://whycan.cn/t_1008.html

关于声卡你看下上面两个帖子, 我暂时还没有用到.

晕哥 · 2018-11-05 13:45:59

asdf 说：

@晕哥 bsp这边内存频率怎么调啊，只支持默认的156？cpu频率在dts调节生效，从276调到了408

应该是 sys_config.fex 里面调，dts是否能调不确定.

晕哥 · 2018-11-26 16:10:18

迪卡说：

迪卡说：
我这github下不动，所以从nano.lichee.pro的百度网盘下载的1.9GB大小C600_Linux.tar.gz，参考https://github.com/mirkerson/c600.git，对照着把带fix
uboot标记的地方都修改了。
./build.sh config
./build.sh
生成的sunivw1p1_linux_evb_uart0.img镜像使用PhoenixSuit烧录无问题，启动后dock底板上RGB的绿灯亮了，串口有信息，可以登录。
既然跑起来了，就开始玩软件了，想安装qt。那么就得用buildroot.
看了一下，BSP目录的buildroot里是没有配置的，out目录里的buildroot才是配置成F1C100S的，使用menuconfig进行配置，在主目录./build.sh会各种报错，失败，应该和晕哥遭遇一样..
接下来，参考晕哥的方法，自己下载buildroot。未完待续....
还有不知道默认编译好的镜像支不支持gpio spi i2c之类的基本接口，还有USB接口，挂载U盘啥的，接电脑虚拟网卡啥的。去尝试一下在kernel3.10目录去menuconfig一下。
把rndis勾上，编译报错...

关于USB问题在这里解决: https://whycan.cn/t_1626.html

晕哥 · 2018-11-29 18:24:04

hai 说：

晕哥，遇到个奇怪问题，uboot烧到板子，串口（uart0）没有任何信息输出，请教这个可能哪里出错了？

确定是 uart0输出, 确认烧录文件没有问题, 确认烧进去了(可以读出来比较)?

晕哥 · 2018-11-30 09:57:02

hai 说：

晕哥说：
hai 说：
晕哥，遇到个奇怪问题，uboot烧到板子，串口（uart0）没有任何信息输出，请教这个可能哪里出错了？
确定是 uart0输出, 确认烧录文件没有问题, 确认烧进去了(可以读出来比较)?
确定是烧到flash了，读取出来的文件内容和烧写的原文件是一样的，通过LED在uboot代码里点灯也是看到启动流程都运行了

看是不是另外一组复用的uart0，还有检查一下硬件，串口模块是不是好的

晕哥 · 2018-11-30 10:26:35

hai 说：

晕哥说：
hai 说：
确定是烧到flash了，读取出来的文件内容和烧写的原文件是一样的，通过LED在uboot代码里点灯也是看到启动流程都运行了
看是不是另外一组复用的uart0，还有检查一下硬件，串口模块是不是好的
另外一组指的是哪个？通过逻辑分析仪测板子的串口uart0引脚都没有波形

PE0,PE1 / PF2,PF4 两组都试一试.
如果这两组都从逻辑分析仪检测不到数据，只能怀疑软件写错了，或者口IO坏了.

晕哥 · 2018-11-30 12:55:06

hai 说：

晕哥说：
hai 说：
另外一组指的是哪个？通过逻辑分析仪测板子的串口uart0引脚都没有波形
PE0,PE1 / PF2,PF4 两组都试一试.
如果这两组都从逻辑分析仪检测不到数据，只能怀疑软件写错了，或者口IO坏了.
有没有什么好方法检测是否是IO口坏了呢？搞了好久软件目前查不到原因

再买两片板子，时间比比板子更值钱

晕哥 · 2018-12-03 17:11:39

device 0 offset 0x100000, size 0x4000
SF: 16384 bytes @ 0x100000 Read: OK
device 0 offset 0x110000, size 0x400000
SF: 4194304 bytes @ 0x110000 Read: OK

zImage flash那部分没有读完, 检查一下是不是硬件引起？

晕哥 · 2018-12-05 12:21:18

hai 说：

多谢，已经解决了这个问题，改为 sf probe 0:50000000; 就可以了，但内核启动到文件系统时停住了 Waiting for root device /dev/mtdblock3...，这个是什么解决的？

首先看下log mtdX 分区有没有解析成功

晕哥 · 2018-12-05 16:01:06

看是不是block相关配置没勾上, 这是我的配置，你参考一下:

CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_BLOCK2MTD=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_BLK_DEV=y

晕哥 · 2018-12-05 16:24:26

hai 说：

查了下.config配置文件，发现有两个地方不一样，下面这两个是在哪里配置的呢？
# CONFIG_MTD_BLOCK2MTD is not set
CONFIG_OF_MDIO=y 这个配置没有在配置文件里面

linux 源码目录下的 .config 文件,
或者 make menuconfig 文件保存后, 也是更新这个文件.

晕哥 · 2018-12-05 16:36:55

hai 说：

make menuconfig 里面那个选项可以配这两个的，貌似找不到呢

那直接修改 .config 更快

晕哥 · 2018-12-05 17:13:38

hai 说：

加了这个配置后启动还是一样的结果

你这是 f1c100s 主线 linux 吧:
https://whycan.cn/t_1662.html
https://whycan.cn/t_1623.html

从官方正常能跑的固件里面抽出 u-boot, dtb, kernel, jffs2 ，然后一个一个替换试一试。

晕哥 · 2018-12-05 17:44:23

hai 说：

bootargs 使用官方文档指导的内核启动到挂载文件系统时就停止了
console=ttyS0,115200 panic=5 rootwait root=/dev/mtdblock3 rw rootfstype=jffs2
bootargs 使用下面这个就可以正常挂载跟文件系统
console=ttyS0,115200 earlyprintk panic=5 rootwait mtdparts=spi0.0:1M(uboot)ro,64k(dtb)ro,4M(kernel)ro,-(rootfs) root=31:03 rw rootfstype=jff2
还搞不清楚什么原因

mtdparts=spi0.0:1M(uboot)ro,64k(dtb)ro,4M(kernel)ro,-(rootfs) 这串必须传给内行，让内核生成分区, 否则后面找不到根文件系统了。

晕哥 · 2018-12-07 09:45:20

小菜说：

我在编译的时候出现：
configure：error:ACC conformance test failed.Stop.
网上查资料说是GCC版本问题，我现在的arm-linux-gnueabi-gcc 是7.3.0版本，使用apt安装的。
请大侠指点如何修改。

bsp linux 用的是SDK包里面的gcc，怎么会是 7.3.0 ?

相关的解决方案:
https://blog.csdn.net/weixin_42421766/article/details/82983170

晕哥 · 2018-12-07 09:56:14

小菜说：

我的linux系统是Ubuntu，我使用apt安装了一个armgcc，是7.3的。我不知道bsp linux里面是否是使用的我系统安装的gcc，还是bsp自带的——因为没有输出信息。
前面有一个什么正则错误，我网上查了一下说是新旧格式的问题，改用新格式就没事了，所以怀疑是使用我的7.3的armgcc

那你换台电脑，或者换一个新虚拟机镜像，按流程再来一次。

晕哥 · 2019-01-07 19:16:15

@qinxiongxu

bsp linux 里面的声卡是可以用的, 好几个网友测试过了.

晕哥 · 2019-01-07 20:29:01

@千石级灯

试一试这个: https://github.com/qq516333132/c600.git

晕哥 · 2019-01-09 08:09:18

qinxiongxu 说：

晕哥，我下载了这个BSP。同时也将FB，LCD等打开了，但是启动起来，屏幕背景大部分是黑色的，但是会显示大小变化方块的花屏颜色，，之前开了内核config的fb color bar，会有RGB的颜色调显示，但是也是有变换的颜色块在闪，显示异常。
请问下晕哥，部分闪烁花屏的问题，还有哪些地方要调整的吗？

屏有没有问题呢？
怎么感觉硬件有问题呢

晕哥 · 2019-01-11 18:44:02

看下没改之前的log,然后对比一下

晕哥 · 2019-01-14 19:50:54

有没有试过烧二楼的镜像呢?

晕哥 · 2019-01-14 20:15:00

qinxiongxu 说：

烧过，运行fb-test，rect没有奔溃，但是屏幕异常显示现象一样。

一样的奔溃信息?

晕哥 · 2019-02-19 11:23:01

asdf 说：

各位路过的大虾，有人用f1c100s跑成功过emmc的没，看datasheet只能通过sd相关引脚转，我自己焊了个tf接口转的emmc，windows,ubuntu都能正常读写，本以为能够像sd卡那样用起来，结果发现烧录，包括在内核当设备都不可用，用逻辑分析仪跟过，cmd0,cmd8后回复R7时，argument内部的vol电压和echo值全都是0，然后cmd0,cmd1回复R1时的card status的值为0x00ff8000,也不知道这是个什么状态，然后就再没相关反应咯！

eMMC肯定是没有问题，可以兼容SD模式

我在 V3s 上面试过了, 也是用转接板。

这是okplay做的: https://whycan.cn/t_355.html#p4428

晕哥 · 2019-05-31 10:52:56

官方的格式并不是 bin 格式，而是烧录软件可以解析的格式，所以生成的 img 文件大小和 flash 大小没有直接关系，不要在意大小。

晕哥 · 2019-05-31 16:56:56

没有理解 "封了" 的意思?还请详细解说

晕哥 · 2019-11-15 17:52:49

bsp编译出来的img不是用这种方式烧录，要用官方烧录软件。

晕哥 · 2019-11-15 21:53:25

hxhlb 说：

晕哥, PhoenixSuit 不是官方烧录吗??

是用 PhoenixSuit 烧录, 如果没反应, 要接串口看日志,具体哪组串口你翻下帖子.

晕哥 · 2019-12-05 10:35:07

zhaolei_cpp 说：

楼主能不能提供一个 sunxi-fel 用的 flash 版本。谢谢啦。我的Windows驱动安装不上。

linux编译非常容易的

晕哥 · 2019-12-06 07:11:00

Biftor 说：

嗨，大家好
我想编译它时遇到问题。
它只是失败了。
您能检查一下怎么了吗？
对不起我不懂中文。
我使用翻译器。
谢谢。
Hi guys
i have problem when i want to compile it.
it just failed.
can you please check what's wrong with it?
sorry i don't know Chinese .
i am using translator.
Thanks.
Ubuntu 18.0.4.3 LTS

try this: sudo apt-get install libtool m4 automake

晕哥 · 2019-12-06 17:25:01

f1c100s bsp驱动比较全，应该支持声卡，不过这个版本比较老，不完全确定是否支持。

WhyCan Forum(哇酷开发者社区)

楼主 #1 2018-08-16 11:54:17 分享评论