自己画了块v3s的板子，spi 启动，到这卡住不走了。有哪位碰到吗？
U-Boot 2011.09-rc1 (Apr 25 2020 - 19:55:58) Allwinner Technology
[ 0.505]version: 1.1.0
[ 0.508]uboot commit : 8
[ 0.514]pmbus: ready
not set main pmu id
axp_probe error
[ 0.520]PMU: pll1 408 Mhz,PLL6=600 Mhz
AXI=204 Mhz,AHB=204 Mhz, APB1=102 Mhz
set power on vol to default
dcdc2_vol = 1200
axp set dcdc2_vol to 1200 failed
dcdc3_vol = 3300
axp set dcdc3_vol to 3300 failed
aldo2_vol = 2500
axp set aldo2_vol to 2500 failed
aldo3_vol = 3000
axp set aldo3_vol to 3000 failed
ldo1_vol = 3300
axp set ldo1_vol to 3300 failed
ldo2_vol = 3000
axp set ldo2_vol to 3000 failed
ldo3_vol = 3000
axp set ldo3_vol to 3000 failed
find power_sply to end
vbus exist
no battery, limit to dc
no key input
dram_para_set start
dram_para_set end
[ 0.651]DRAM: 64 MiB
relocation Offset is: 0309c000
离线