openwrt下如何添加wifi指示灯和wan指示灯？
我用的MT7620a的开发板，wled-->gpio#72，wan-->gpio#49,我在openwrt/target/linux/ramips/dts/MT7620a.dts里做了如下操作(红色部分)，可是编译出的固件指示灯还是不亮,各位大佬指导一下
/dts-v1/;
/include/ "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
model = "Ralink MT7620a + MT7610e evaluation board";
palmbus@10000000 {
gpio2: gpio@660{
status = "okay";
};
gpio3: gpio@688{
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "en25q64";
reg = <0 0>;
linux,modalias = "m25p80", "en25q64";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x1fb0000>;
};
};
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf","wled";
ralink,function = "gpio";
};
};
};
ethernet@10100000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
ralink,port-map = "llllw";
};
wmac@10180000{
ralink,mtd-eeprom = <&factory 0>;
};
gpio-leds {
compatible = "gpio-leds";
wan {
label = "w856n:blue:wan"; /*led灯的标识，会体现在/sys/class/leds目录中*/
gpios = <&gpio2 9 1>; /*led灯对应的gpio编号;表示是gpio2组中的第4个GPIO;这里的wan对应路由器面板外壳上的丝印*/
};
wlan {
label = "w856n:blue:wlan";
gpios = <&gpio3 0 1>;
};
};
gsw@10110000 {
ralink,port4 = "gmac";
};
sdhci@10130000 {
status = "okay";
};
pcie@10140000 {
status = "okay";
};
gpio-keys-polled {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
s2 {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x198>;
};
s3 {
label = "power";
gpios = <&gpio0 2 1>;
linux,code = <116>;
};
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
};
离线
以上是我的dts文件，代码部分为我增加的操作，最终不能实现功能，请各位大侠指导一下
离线
可以在用户空间操作io吗？
/sys/class/gpio里可以看到，但是我需要怎么配置才能让wifi打开是指示灯亮，关闭WiFi时指示灯灭呢？
root@OpenWrt:/sys/class/gpio#
root@OpenWrt:/sys/class/gpio# ls
export gpiochip0 gpiochip40 gpiochip72 unexport
root@OpenWrt:/sys/class/gpio#
离线
在/sys/class/leds/下也可以看到w856n:blue:wlan 我如下操作root@OpenWrt:/sys/devices/gpio-leds/leds/w856n:blue:wlan# echo "1" > ./brightness 也能点亮led,但是我要如何才能让WiFi开启时点亮，关闭时熄灭呢？
root@OpenWrt:/sys/class# cd leds/
root@OpenWrt:/sys/class/leds# ls
rt2800soc-phy0::assoc rt2800soc-phy0::radio
rt2800soc-phy0::quality w856n:blue:wlan
root@OpenWrt:/sys/class/leds# cd w856n\:blue\:wlan/
root@OpenWrt:/sys/devices/gpio-leds/leds/w856n:blue:wlan# ls
brightness max_brightness trigger
device subsystem uevent
root@OpenWrt:/sys/devices/gpio-leds/leds/w856n:blue:wlan# echo "1" > ./brightness
root@OpenWrt:/sys/devices/gpio-leds/leds/w856n:blue:wlan#
离线
看看widora neo MT7688开发板的配置:
https://github.com/openwrt/openwrt/search?utf8=%E2%9C%93&q=widora%3Aorange%3Awifi&type=
有没有配置 /etc/diag.sh 文件:
widora-neo)
status_led="widora:orange:wifi"
我的/openwrt/target/linux/ramips/base-files/etc/diag.sh文件内容如下，这里面什么以上啊，我网上没找到资料，该如何修改配置呢？
#!/bin/sh
# Copyright (C) 2010-2013 OpenWrt.org
. /lib/functions/leds.sh
. /lib/ramips.sh
get_status_led() {
case $(ramips_board_name) in
3g-6200n)
status_led="edimax:green:power"
;;
3g150b | 3g300m | w150m)
status_led="tenda:blue:ap"
;;
ai-br100)
status_led="aigale:blue:wlan"
;;
ar670w)
status_led="ar670w:green:power"
;;
ar725w)
status_led="ar725w:green:power"
;;
awapn2403)
status_led="asiarf:green:wps"
;;
argus-atp52b)
status_led="argus-atp52b:green:run"
;;
asl26555)
status_led="asl26555:green:power"
;;
br6524n)
status_led="edimax:blue:power"
;;
br6425 | br-6475nd)
status_led="edimax:green:power"
;;
cf-wr800n)
status_led="comfast:white:wps"
;;
cy-swr1100)
status_led="samsung:blue:wps"
;;
d105)
status_led="d105:red:power"
;;
dcs-930 | dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-610-a1 | dir-615-h1 | dir-615-d | dir-620-a1| dir-620-d1| dir-300-b7| dir-320-b1)
status_led="d-link:green:status"
;;
dcs-930l-b1)
status_led="d-link:red:power"
;;
dir-645)
status_led="d-link:green:wps"
;;
dap-1350)
status_led="d-link:blue:power"
;;
e1700)
status_led="linksys:green:power"
;;
esr-9753)
status_led="esr-9753:orange:power"
;;
ex2700)
status_led="ex2700:red:power"
;;
f5d8235-v2)
status_led="f5d8235v2:blue:router"
;;
fonera20n)
status_led="fonera20n:green:power"
;;
ip2202)
status_led="ip2202:green:run"
;;
rt-n13u)
status_led="rt-n13u:power"
;;
hlk-rm04)
status_led="hlk-rm04:red:power"
;;
ht-tm02)
status_led="ht-tm02:blue:wlan"
;;
all0239-3g|\
hw550-3g)
status_led="hw550-3g:green:status"
;;
linkits7688| \
linkits7688d)
[ "$1" = "upgrade" ] && status_led="mediatek:orange:wifi"
;;
m2m)
status_led="m2m:blue:wifi"
;;
m3)
status_led="m3:blue:status"
;;
m4)
status_led="m4:blue:status"
;;
mlw221|\
mlwg2)
status_led="kingston:blue:system"
;;
mofi3500-3gn)
status_led="mofi3500-3gn:green:status"
;;
mpr-a1)
status_led="hame:red:power"
;;
mpr-a2)
status_led="hame:red:power"
;;
mr-102n)
status_led="mr-102n:amber:status"
;;
nbg-419n)
status_led="nbg-419n:green:power"
;;
nw718)
status_led="nw718:amber:cpu"
;;
omni-emb|\
omni-emb-hpm)
status_led="emb:green:status"
;;
pbr-m1)
status_led="pbr-m1:green:sys"
;;
psr-680w)
status_led="psr-680w:red:wan"
;;
pwh2004)
status_led="pwh2004:green:power"
;;
px4885)
status_led="7links:orange:wifi"
;;
re6500)
status_led="linksys:orange:wifi"
;;
rt-n15)
status_led="rt-n15:blue:power"
;;
rt-n10-plus)
status_led="asus:green:wps"
;;
rt-n14u | rt-n56u | wl-330n | wl-330n3g)
status_led="asus:blue:power"
;;
rut5xx)
status_led="rut5xx:green:status"
;;
sl-r7205)
status_led="sl-r7205:green:status"
;;
tew-691gr|\
tew-692gr)
status_led="trendnet:green:wps"
;;
v11st-fe)
status_led="v11st-fe:green:status"
;;
v22rw-2x2)
status_led="v22rw-2x2:green:security"
;;
vocore)
status_led="vocore:green:status"
;;
w306r-v20)
status_led="w306r-v20:green:sys"
;;
w502u)
status_led="alfa:blue:wps"
;;
wcr-150gn)
status_led="wcr150gn:amber:power"
;;
whr-g300n)
status_led="whr-g300n:green:router"
;;
wizfi630a)
status_led="wizfi630a::run"
;;
wmr300)
status_led="buffalo:green:status"
;;
wli-tx4-ag300n)
status_led="buffalo:blue:power"
;;
wzr-agl300nh)
status_led="buffalo:green:router"
;;
wl-351)
status_led="wl-351:amber:power"
;;
wr512-3gn)
status_led="wr512:green:wps"
;;
wr8305rt)
status_led="wr8305rt:sys"
;;
whr-300hp2 | \
whr-600d | \
whr-1166d | \
wsr-600 | \
wsr-1166)
status_led="buffalo:orange:diag"
;;
wnce2001)
status_led="netgear:green:power"
;;
nexx-wt1520)
status_led="nexx-wt1520:white:power"
;;
wt3020)
status_led="nexx:blue:power"
;;
mzk-w300nh2)
status_led="mzkw300nh2:green:power"
;;
ur-326n4g)
status_led="ur326:green:wps"
;;
ur-336un)
status_led="ur336:green:wps"
;;
x5)
status_led="x5:green:power"
;;
x8)
status_led="x8:green:power"
;;
xdxrn502j)
status_led="xdxrn502j:green:power"
;;
xiaomi-mini)
status_led="xiaomi:red:status"
;;
f7c027)
status_led="belkin:orange:status"
;;
na930)
status_led="na930:blue:power"
;;
y1 | \
y1s)
status_led="lenovo:blue:power"
;;
zbt-wg2626)
status_led="zbt-wg2626:green:status"
;;
zte-q7)
status_led="zte:red:status"
;;
esac
}
set_state() {
get_status_led $1
case "$1" in
preinit)
status_led_blink_preinit
;;
failsafe)
status_led_blink_failsafe
;;
upgrade | \
preinit_regular)
status_led_blink_preinit_regular
;;
done)
status_led_on
;;
esac
}离线
在openwrt:/sys/class/leds/下可以看到7620a:blue:wifi
root@OpenWrt:/sys/class# cd leds/
root@OpenWrt:/sys/class/leds# ls
7620a:blue:wifi rt2800soc-phy0::quality
rt2800soc-phy0::assoc rt2800soc-phy0::radio
root@OpenWrt:/sys/class/leds#
我在代码中是不是应该在/openwrt/target/linux/ramips/base-files/etc/diag.sh这样添加啊？
MT7620a)
status_led="7620a:blue:wifi "
;;
离线
谢谢！指导！
离线
lzx1044364960 说：谢谢！指导！
搞定了吗？我过段时间也要弄7620了.
离线