小弟刚入坑Android系统开发,使用的是全志A33的芯片,从百度云盘将源码下下来,编译烧录.无法开机,接上串口将日志打印出来
烧录百度云的img使能正常开机的,说明板子没问题
离线
[ 0.264]
U-Boot 2011.09-rc1 (Jan 24 2022 - 10:21:23) Allwinner Technology
[ 0.272]version: 2.1.0
[ 0.358]pmbus: ready
[ 0.360]PMU: AXP221
[ 0.362]PMU: AXP22x found
[ 0.366]PMU: dcdc3 1200
[ 0.369]PMU: pll1 1008 Mhz,PLL6=600 Mhz
AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz
set power on vol to default
dcdc1_vol = 3000
dcdc2_vol = 1100
dcdc3_vol = 1200
dcdc4_vol = 0
dcdc5_vol = 1500
aldo2_vol = 2500
aldo3_vol = 3000
eldo1_vol = 3300
find power_sply to end
vbus pc exist, limit to pc
fel key old mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
[ 0.997]DRAM: 1 GiB
relocation Offset is: 35af1000
fetch script data fail
huangn uboot disp_lcd_init [PWM]backlight_bright=192,period_ns=100000,duty_ns=15469
huangn PWM _TEST: duty_ns=15469, period_ns=100000, freq=10000, per_scal=0, period_reg=0xf
smcl's set manager is NULL
<axp22, dc1sw>
BOOT_POWER22_OUTPUT_CTL2 = 129
workmode = 0
[ 1.221]NAND: NAND_UbootInit
NAND_UbootInit start
NB1 : enter NAND_LogicInit
uboot:nand version: 2 33 20170405 1103
nand : get id_number_ctl fail, 1
uboot:nand info: a714dead ffff4a42 318c 40704 5
nand : get sorting_flag fail, a
nand : get CapacityLevel fail, 7fb8d0a1
not burn nand partition table!
NB1 : nftl num: 2
init nftl: 0
huangn uboot disp_lcd_set_brightlcd bright= 192
huangn uboot disp_lcd_set_brightlcd [PWM]bright=192, bright_modify=193, backlight_dimming=129, period_ns=100000, duty_ns=15469
huangn PWM _TEST: duty_ns=15469, period_ns=100000, freq=10000, per_scal=0, period_reg=0x1000000f
sunxi_pwm_enable,pwm = 0!
NB1 : NAND_LogicInit ok, result = 0x0
[ 2.179]sunxi flash init ok
out of usb burn from boot: not enough energy
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:10-
-name- -start- -size-
bootloader : 1000000 2000000
env : 3000000 1000000
boot : 4000000 1000000
system : 5000000 40000000
misc : 45000000 1000000
recovery : 46000000 2000000
cache : 48000000 c000000
metadata : 54000000 1000000
private : 55000000 1000000
UDISK : 56000000 0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_nand
key 0
recovery key high 5, low 3
cant find fstbt value
misc partition found
misc_message->command = ff
to be run cmd=run setargs_nand boot_normal
mount part name bootloader
cant open script.bin, maybe it is not exist
WORK_MODE_BOOT
board_status_probe
stage1 resule 2
[ 2.283]key trigger
stage2 resule 0
huangn board_status_probe 2222222222222222
sunxi_bmp_logo_display
screen_id =0, screen_width =1024, screen_height =600
[ 2.321]Hit any key to stop autoboot: 0
read boot or recovery all
[ 2.813]sunxi flash read :offset 4000000, 13091466 bytes OK
no signature
[ 2.823]ready to boot
para err in disp_ioctl, cmd = 0xa,screen id = 1
[ 2.829][mmc]: MMC Device 2 not found
[ 2.833][mmc]: mmc not find,so not exit
NAND_UbootExit
NB1 : NAND_LogicExit
nand release dma:0
[ 2.837]
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.39 (wyh@wyh-BoDE) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #776 SMP PREEMPT Mon Jan 24 11:21:19 CST 2022
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun8i
[ 0.000000] cma: CMA: reserved 176 MiB at 75000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c09a7b40, node_mem_map c11ca000
[ 0.000000] Normal zone: 1710 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 192850 pages, LIFO batch:31
[ 0.000000] HighMem zone: 594 pages used for memmap
[ 0.000000] HighMem zone: 66990 pages, LIFO batch:15
[ 0.000000] script_init enter!
[ 0.000000] script_init exit!
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c1ae3000 s10688 r8192 d13888 u32768
[ 0.000000] pcpu-alloc: s10688 r8192 d13888 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259840
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/nandd init=/init ion_cma_512m=120m ion_cma_1g=176m ion_carveout_512m=96m ion_carveout_1g=150m coherent_pool=4m loglevel=8 partitions=bootloader@nanda:env@nandb:boot@nandc:system@nandd:misc@nande:recovery@nandf:cache@nandg:metadata@nandh:private@nandi:UDISK@nandj boot_type=0 config_size=41700
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1024MB = 1024MB total
[ 0.000000] Memory: 844688k/844688k available, 203888k reserved, 90112K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc08ea3d4 (9097 kB)
[ 0.000000] .init : 0xc08eb000 - 0xc093d9c0 ( 331 kB)
[ 0.000000] .data : 0xc093e000 - 0xc09b8b08 ( 491 kB)
[ 0.000000] .bss : 0xc09ba098 - 0xc0b41708 (1566 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:416
[ 0.000000] try to syncboot of clk ats
[ 0.000000] try to syncboot of clk sdmmc2mod
[ 0.000000] try to syncboot of clk uart0
[ 0.000000] try to syncboot of clk pll_ddr1
[ 0.000000] try to syncboot of clk debe0
[ 0.000000] try to syncboot of clk nand
[ 0.000000] try to syncboot of clk dma
[ 0.000000] try to syncboot of clk sat
[ 0.000000] try to syncboot of clk pio
[ 0.000000] try to syncboot of clk mbus
[ 0.000000] try to syncboot of clk drc0
[ 0.000000] try to syncboot of clk lcd0ch0
[ 0.000000] try to syncboot of clk axi
[ 0.000000] Architected local timer running at 24.00MHz.
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000259] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
[ 0.000286] pid_max: default: 32768 minimum: 301
[ 0.000514] Security Framework initialized
[ 0.000567] SELinux: Initializing.
[ 0.000637] SELinux: Starting in permissive mode
[ 0.000651] AppArmor: AppArmor disabled by boot time parameter
[ 0.000758] Mount-cache hash table entries: 512
[ 0.001897] Initializing cgroup subsys debug
[ 0.001917] Initializing cgroup subsys cpuacct
[ 0.001929] Initializing cgroup subsys freezer
[ 0.001974] CPU: Testing write buffer coherency: ok
[ 0.002024] ftrace: allocating 23540 entries in 70 pages
[ 0.030357] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.030379] [sunxi_smp_prepare_cpus] enter
[ 0.030428] Setting up static identity map for 0x406395f0 - 0x40639648
[ 0.010000] CPU1: Booted secondary processor
[ 0.010000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.010000] CPU2: Booted secondary processor
[ 0.010000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.010000] CPU3: Booted secondary processor
<6>[ 0.010000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.210196] Brought up 4 CPUs
[ 0.210196] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
[ 0.210452] devtmpfs: initialized
[ 0.220319] pinctrl core: initialized pinctrl subsystem
[ 0.220467] dummy:
[ 0.227974] NET: Registered protocol family 16
[ 0.245039] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.245128] script_sysfs_init success
[ 0.245163] sunxi_dump_init success
[ 0.245467] sunxi pinctrl probe enter
[ 0.246194] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
[ 0.247521] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
[ 0.247746] axp_pinctrl_probe enter...
[ 0.247929] gpiochip_add: registered GPIOs 1024 to 1029 on device: axp-pinctrl
[ 0.247951] mainkey total count : 79
[ 0.247962] mainkey name : product, pin count : 0
[ 0.247973] mainkey name : platform, pin count : 0
[ 0.247985] mainkey name : target, pin count : 0
[ 0.247995] mainkey name : key_detect_en, pin count : 0
[ 0.248007] mainkey name : power_sply, pin count : 0
[ 0.248017] mainkey name : card_boot, pin count : 0
[ 0.248028] mainkey name : card0_boot_para, pin count : 6
[ 0.248042] mainkey name : card2_boot_para, pin count : 6
[ 0.248054] mainkey name : twi_para, pin count : 2
[ 0.248066] mainkey name : uart_para, pin count : 2
[ 0.248078] mainkey name : force_uart_para, pin count : 2
[ 0.248091] mainkey name : jtag_para, pin count : 4
[ 0.248104] mainkey name : clock, pin count : 0
[ 0.248115] mainkey name : pm_para, pin count : 0
[ 0.248126] mainkey name : dram_para, pin count : 0
[ 0.248137] mainkey name : pm_para, pin count : 0
[ 0.248148] mainkey name : wakeup_src_para, pin count : 2
[ 0.248160] mainkey name : twi0, pin count : 2
[ 0.248171] mainkey name : twi1, pin count : 2
[ 0.248182] mainkey name : twi2, pin count : 2
[ 0.248194] mainkey name : uart0, pin count : 2
[ 0.248205] mainkey name : uart1, pin count : 2
[ 0.248218] mainkey name : uart2, pin count : 4
[ 0.248229] mainkey name : uart3, pin count : 4
[ 0.248241] mainkey name : uart4, pin count : 4
[ 0.248253] mainkey name : spi0, pin count : 4
[ 0.248264] mainkey name : spi1, pin count : 4
[ 0.248274] mainkey name : spi_devices, pin count : 0
[ 0.248285] mainkey name : spi_board0, pin count : 0
[ 0.248295] mainkey name : ws1830, pin count : 1
[ 0.248306] mainkey name : ctp_para, pin count : 2
[ 0.248316] mainkey name : ctp_list_para, pin count : 0
[ 0.248327] mainkey name : tkey_para, pin count : 0
[ 0.248337] mainkey name : motor_para, pin count : 1
[ 0.248349] map mainkey [motor_para] to pinctrl, map number [2]
[ 0.248363] mainkey name : ths_para, pin count : 0
[ 0.248373] mainkey name : cooler_table, pin count : 0
[ 0.248384] mainkey name : nand0_para, pin count : 19
[ 0.248397] mainkey name : disp_init, pin count : 0
[ 0.248409] mainkey name : lcd0_para, pin count : 30
[ 0.248425] mainkey name : pwm0_para, pin count : 1
[ 0.248437] mainkey name : pwm1_para, pin count : 1
[ 0.248449] mainkey name : csi0, pin count : 16
[ 0.248463] mainkey name : mmc0_para, pin count : 7
[ 0.248474] mainkey name : mmc1_para, pin count : 6
[ 0.248486] mainkey name : mmc2_para, pin count : 11
[ 0.248498] mainkey name : usbc0, pin count : 2
[ 0.248509] map mainkey [usbc0] to pinctrl, map number [2]
[ 0.248530] mainkey name : usbc1, pin count : 0
[ 0.248540] mainkey name : usb_feature, pin count : 0
[ 0.248551] mainkey name : msc_feature, pin count : 0
[ 0.248561] mainkey name : serial_feature, pin count : 0
[ 0.248572] mainkey name : gsensor_para, pin count : 1
[ 0.248583] mainkey name : gsensor_list_para, pin count : 0
[ 0.248594] mainkey name : gps_para, pin count : 0
[ 0.248604] mainkey name : wifi_para, pin count : 6
[ 0.248616] map mainkey [wifi_para] to pinctrl, map number [2]
[ 0.248628] mainkey name : bt_para, pin count : 0
[ 0.248638] mainkey name : 3g_para, pin count : 4
[ 0.248649] mainkey name : gy_para, pin count : 0
[ 0.248660] mainkey name : gy_list_para, pin count : 0
[ 0.248670] mainkey name : ls_para, pin count : 1
[ 0.248681] mainkey name : ls_list_para, pin count : 0
[ 0.248692] mainkey name : compass_para, pin count : 0
[ 0.248703] mainkey name : i2s0, pin count : 4
[ 0.248713] mainkey name : i2s1, pin count : 4
[ 0.248724] mainkey name : audio0, pin count : 1
[ 0.248735] mainkey name : pmu1_para, pin count : 0
[ 0.248746] mainkey name : pmu2_para, pin count : 0
[ 0.248756] mainkey name : recovery_key, pin count : 0
[ 0.248767] mainkey name : dvfs_table, pin count : 0
[ 0.248778] mainkey name : Vdevice, pin count : 2
[ 0.248789] mainkey name : s_uart0, pin count : 2
[ 0.248799] mainkey name : s_rsb0, pin count : 2
[ 0.248810] mainkey name : s_jtag0, pin count : 4
[ 0.248821] mainkey name : s_powchk, pin count : 0
[ 0.248832] mainkey name : mali_para, pin count : 0
[ 0.248843] mainkey name : dram_dvfs_table, pin count : 0
[ 0.248854] mainkey name : charging_type, pin count : 0
[ 0.248865] mainkey name : dram_scene_table, pin count : 0
[ 0.248876] mainkey name : leds_para, pin count : 2
[ 0.248887] map mainkey [leds_para] to pinctrl, map number [4]
[ 0.248900] mainkey name : gpio_para, pin count : 5
[ 0.248910] axp pinctrl driver probe ok
[ 0.250608] [sunxi-module]: [sunxi-module.0] probe success
[ 0.250660] script config pll3 to 297 Mhz
[ 0.250678] script config pll4 to 300 Mhz
[ 0.250716] script config pll6 to 600 Mhz
[ 0.250730] script config pll8 to 408 Mhz
[ 0.250752] script config pll9 to 480 Mhz
[ 0.250766] script config pll10 to 297 Mhz
<4>[ 0.250775] sunxi_default_clk_init
[ 0.250783] try to set pll6ahb1 to 200000000
[ 0.250836] try to set ahb clk source to pll6ahb1
[ 0.250846] set ahb clk source to pll6ahb1
[ 0.250857] try to set ahb1 to 200000000
[ 0.250869] try to set apb1 to 100000000
[ 0.260302] bio: create slab <bio-0> at 0
[ 0.260499] [ARISC] :sunxi-arisc driver v1.60
[ 0.296211] [ARISC] :arisc version: [v0.0.76]
[ 0.296224] [sunxi-module]: arisc register success
[ 0.515785] [ARISC] :sunxi-arisc driver v1.60 startup succeeded
[ 0.520575] SCSI subsystem initialized
[ 0.520817] usbcore: registered new interface driver usbfs
[ 0.520906] usbcore: registered new interface driver hub
[ 0.520956] usbcore: registered new device driver usb
[ 0.520956] twi_chan_cfg()350 - [twi0] has no twi_regulator.
[ 0.520956] twi_chan_cfg()350 - [twi1] has no twi_regulator.
[ 0.520956] twi_chan_cfg()350 - [twi2] has no twi_regulator.
[ 0.521240] Linux video capture interface: v2.00
[ 0.520044] axp22_board axp22_board: AXP (CHIP ID: 0x06) detected
[ 0.522119] axp22_dcdc1: 1600 <--> 3400 mV at 3000 mV
[ 0.522119] axp22_dcdc2: 600 <--> 1540 mV at 1100 mV
[ 0.522119] axp22_dcdc3: 600 <--> 1860 mV at 1200 mV
[ 0.522119] axp22_dcdc4: 600 <--> 1540 mV at 1100 mV
[ 0.522119] axp22_dcdc5: 1000 <--> 2550 mV at 1500 mV
[ 0.522119] axp22_rtc: 3000 mV
[ 0.522119] axp22_aldo1: 700 <--> 3300 mV at 3000 mV
[ 0.522119] axp22_aldo2: 700 <--> 3300 mV at 2500 mV
[ 0.522119] axp22_aldo3: 700 <--> 3300 mV at 3000 mV
[ 0.522119] axp22_dldo1: 700 <--> 3300 mV at 700 mV
[ 0.522119] axp22_dldo2: 700 <--> 3300 mV at 700 mV
[ 0.522119] axp22_dldo3: 700 <--> 3300 mV at 700 mV
[ 0.530036] axp22_dldo4: 700 <--> 3300 mV at 700 mV
[ 0.530233] axp22_eldo1: 700 <--> 3300 mV at 3300 mV
[ 0.530233] axp22_eldo1: supplied by axp22_dcdc1
[ 0.530308] axp22_eldo2: 700 <--> 3300 mV at 700 mV
[ 0.530308] axp22_eldo2: supplied by axp22_dcdc1
[ 0.530308] axp22_eldo3: 700 <--> 3300 mV at 700 mV
[ 0.530308] axp22_eldo3: supplied by axp22_dcdc1
[ 0.530308] axp22_dc5ldo: 700 <--> 1400 mV at 1100 mV
[ 0.530308] axp22_ldoio0: 700 <--> 3300 mV at 3800 mV
[ 0.530308] axp22_ldoio1: 700 <--> 3300 mV at 3800 mV
[ 0.530308] axp22_dc1sw: at 700 mV
[ 0.530308] axp22_dc1sw: supplied by axp22_dcdc1
[ 0.530429] input: axp22-supplyer as /devices/platform/axp22_board/axp22-supplyer.20/input/input0
[ 0.530676] now_rest_vol = 100
[ 0.530676] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.530915] Bluetooth: Core ver 2.16
[ 0.530993] NET: Registered protocol family 31
[ 0.531006] Bluetooth: HCI device and connection manager initialized
[ 0.531023] Bluetooth: HCI socket layer initialized
[ 0.531035] Bluetooth: L2CAP socket layer initialized
[ 0.531069] Bluetooth: SCO socket layer initialized
<6>[ 0.531362] cfg80211: Calling CRDA to update world regulatory domain
[ 0.531402] Switching to clocksource arch_sys_counter
[ 0.553724] ro.twd get target ddrx2 fail
[ 0.554040] FS-Cache: Loaded
[ 0.554409] CacheFiles: Loaded
[ 0.565887] [sunxi_hci_sunxi]: sunxi-ehci1(restrict_gpio) is invalid
[ 0.565904] [sunxi_hci_sunxi]: sunxi-ehci1(drv vbus) is invalid
[ 0.565920] [sunxi_hci_sunxi]: get usb_regulator is nocare
[ 0.565953] [sunxi_hci_sunxi]: sunxi-ohci1(restrict_gpio) is invalid
[ 0.565966] [sunxi_hci_sunxi]: sunxi-ohci1(drv vbus) is invalid
[ 0.565979] [sunxi_hci_sunxi]: get usb_regulator is nocare
[ 0.566217] [usb_manager]: CONFIG_USB_SUNXI_USB0_OTG
[ 0.566245] no usbc(0) det_vbus gpio and try to axp det_pin
[ 0.566258] get usbc0(usb_restrict pin) failed
[ 0.566681] [sw_udc]: udc_init: version 20080411
[ 0.567205] [ddrfreq] dram_clk value is 456
[ 0.567216] [ddrfreq] sunxi_ddrfreq_max=456000
[ 0.567226] [ddrfreq] dram_type value is 3
[ 0.567237] [ddrfreq] dram_zq value is 0x3bbb
[ 0.567247] [ddrfreq] dram_odt_en value is 1
[ 0.567258] [ddrfreq] dram_para1 value is 0x10f20400
[ 0.567269] [ddrfreq] dram_para2 value is 0x1000
[ 0.567279] [ddrfreq] dram_mr0 value is 0x1c70
[ 0.567289] [ddrfreq] dram_mr1 value is 0x40
[ 0.567299] [ddrfreq] dram_mr2 value is 0x18
[ 0.567309] [ddrfreq] dram_mr3 value is 0x0
[ 0.567320] [ddrfreq] dram_tpr0 value is 0x46210d
[ 0.567330] [ddrfreq] dram_tpr1 value is 0x1c22109
[ 0.567341] [ddrfreq] dram_tpr2 value is 0x50037
[ 0.567351] [ddrfreq] dram_tpr3 value is 0x0
[ 0.567361] [ddrfreq] dram_tpr4 value is 0x0
[ 0.567371] [ddrfreq] dram_tpr5 value is 0x0
[ 0.567381] [ddrfreq] dram_tpr6 value is 0x0
[ 0.567391] [ddrfreq] dram_tpr7 value is 0x0
[ 0.567401] [ddrfreq] dram_tpr8 value is 0x0
[ 0.567411] [ddrfreq] dram_tpr9 value is 0x0
[ 0.567421] [ddrfreq] dram_tpr10 value is 0x0
[ 0.567431] [ddrfreq] dram_tpr11 value is 0x0
[ 0.567441] [ddrfreq] dram_tpr12 value is 168
[ 0.567451] [ddrfreq] sunxi_ddrfreq_min=168000
[ 0.567461] [ddrfreq] dram_tpr13 value is 0x10901
[ 0.567627] [dsm] use sysconfig
[ 0.567636] [dsm] -----------Dram scene-freq Table------------
[ 0.567647] [dsm] scene = 0 frequency = 456000KHz
[ 0.567657] [dsm] scene = 1 frequency = 360000KHz
[ 0.567666] [dsm] scene = 2 frequency = 240000KHz
[ 0.567676] [dsm] scene = 3 frequency = 168000KHz
[ 0.567685] [dsm] --------------------------------------------
[ 0.567831] [ddrfreq] LV_count value is 3
[ 0.567855] [ddrfreq] ---------------Dram V-F Table---------------
[ 0.567867] [ddrfreq] voltage = 1100mv frequency = 552000KHz
[ 0.567878] [ddrfreq] voltage = 1100mv frequency = 360000KHz
[ 0.567888] [ddrfreq] voltage = 1100mv frequency = 0KHz
[ 0.567898] [ddrfreq] --------------------------------------------
[ 0.568092] [ddrfreq] last_vdd=1100
[ 0.568180] [ddrfreq] __sram_start: 0xc09b9000, __sram_end: 0xc09ba074, __sram_text_start: 0xf0000000, __sram_data_end: 0xf0001074
[ 0.568195] [ddrfreq] sunxi dramfreq probe ok!
[ 0.568548] NET: Registered protocol family 2
[ 0.568864] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.569461] ro.twd get target ddrx2 fail
[ 0.569642] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.571615] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.572542] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.572555] TCP: reno registered
[ 0.572570] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.572610] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.572980] NET: Registered protocol family 1
[ 0.573429] RPC: Registered named UNIX socket transport module.
[ 0.573442] RPC: Registered udp transport module.
[ 0.573452] RPC: Registered tcp transport module.
[ 0.573461] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.573730] Unpacking initramfs...
[ 0.704177] Freeing initrd memory: 1828K
[ 0.704662] [pm]aw_pm_init!
[ 0.704675] standby_mode = 1.
[ 0.704684] wakeup src cnt is : 2.
[ 0.704696] [exstandby]leave extended_standby_enable_wakeup_src : event 0x2000
[ 0.704708] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x80
[ 0.704720] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
[ 0.704732] [exstandby]leave extended_standby_enable_wakeup_src : event 0x2000
[ 0.704744] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x280
[ 0.704756] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
[ 0.704777] [wifi_pm]: no wifi used in configuration
[ 0.704787] sunxi_reg_init enter
[ 0.705900] audit: initializing netlink socket (disabled)
[ 0.705971] type=2000 audit(0.700:1): initialized
[ 0.706810] highmem bounce pool size: 64 pages
[ 0.708963] NTFS driver 2.1.30 [Flags: R/W].
[ 0.709175] fuse init (API version 7.18)
[ 0.709681] ro.twd get target ddrx2 fail
[ 0.709695] msgmni has been set to 1477
[ 0.709749] SELinux: Registering netfilter hooks
[ 0.712127] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.712148] io scheduler noop registered
[ 0.712159] io scheduler deadline registered
[ 0.712260] io scheduler cfq registered (default)
[ 0.712727] pwm module init!
[ 0.713327] sw_uart_get_devinfo()1416 - uart0 has no uart_regulator.
[ 0.713346] sw_uart_get_devinfo()1416 - uart1 has no uart_regulator.
[ 0.713683] sw_uart_request_gpio()776 - UART0 devm_pinctrl_get() failed! return -22
[ 0.713709] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
[ 0.713731] sw_console_setup()1176 - console setup baud 115200 parity n bits 8, flow n
[ 0.906177] console [ttyS0] enabled
[ 1.002252] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
[ 1.198507] loop: module loaded
[ 1.294072] sunxi_spi_chan_cfg()1368 - [spi-0] has no spi_regulator.
[ 1.580385] sunxi_spi_chan_cfg()1368 - [spi-1] has no spi_regulator.
[ 2.662615] spi spi0: master is unqueued, this is deprecated
[ 2.669033] tun: Universal TUN/TAP device driver, 1.6
[ 2.674671] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.681790] PPP generic driver version 2.4.2
[ 2.686715] PPP BSD Compression module registered
[ 2.691954] PPP Deflate Compression module registered
[ 2.698497] PPP MPPE Compression module registered
[ 2.703845] NET: Registered protocol family 24
[ 2.708817] PPTP driver version 0.8.5
[ 2.713234] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.720609] [sunxi_hci_sunxi]: [sunxi-ehci1]: probe, pdev->name: sunxi-ehci, pdev->id: 1, sunxi_ehci: 0xc0a13e2c
[ 2.731929] [sunxi_hci_sunxi]: [sunxi-ehci1]: open clock, is_open: 0
[ 2.759009] [sunxi_hci_sunxi]: [sunxi-ehci1]: Set USB Power ON
[ 2.765500] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.774421] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
[ 2.784650] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
[ 2.810049] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
[ 2.816628] ehci_irq: highspeed device connect
[ 2.821715] hub 1-0:1.0: USB hub found
[ 2.825893] hub 1-0:1.0: 1 port detected
[ 2.830719] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.837649] [sunxi_hci_sunxi]: [sunxi-ohci1]: probe, pdev->name: sunxi-ohci, pdev->id: 1, sunxi_ohci: 0xc0a13f30
[ 2.848979] [sunxi_hci_sunxi]: [sunxi-ohci1]: open clock, is_open: 0
[ 2.876062] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 2.884588] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
[ 2.893035] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
[ 2.954668] hub 2-0:1.0: USB hub found
[ 2.958847] hub 2-0:1.0: 1 port detected
[ 2.963799] usbcore: registered new interface driver cdc_acm
[ 2.970107] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.978990] Initializing USB Mass Storage driver...
[ 2.984522] usbcore: registered new interface driver usb-storage
[ 2.991203] USB Mass Storage support registered.
[ 2.996371] usbcore: registered new interface driver ums-alauda
[ 3.002998] usbcore: registered new interface driver ums-cypress
[ 3.009705] usbcore: registered new interface driver ums-datafab
[ 3.016570] usbcore: registered new interface driver ums_eneub6250
[ 3.023503] usbcore: registered new interface driver ums-freecom
[ 3.030271] usbcore: registered new interface driver ums-isd200
[ 3.036889] usbcore: registered new interface driver ums-jumpshot
[ 3.043715] usbcore: registered new interface driver ums-karma
[ 3.050254] usbcore: registered new interface driver ums-onetouch
[ 3.057073] usbcore: registered new interface driver ums-realtek
[ 3.063835] usbcore: registered new interface driver ums-sddr09
[ 3.070465] usbcore: registered new interface driver ums-sddr55
[ 3.077072] usbcore: registered new interface driver ums-usbat
[ 3.083696] usbcore: registered new interface driver usbserial
[ 3.090187] usbserial: USB Serial Driver core
[ 3.095069] usbcore: registered new interface driver option
[ 3.101305] USB Serial support registered for GSM modem (1-port)
[ 3.150061] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
[ 3.303408] [sw_udc]: [sunxi_usb_udc]: binding gadget driver 'android_usb'
[ 3.311088] [sw_udc]: alloc request: ep(0xc0986ed0, ep0, 64), req(0xee9875c0)
[ 3.319021] sunxi_udc_set_selfpowered_2300: usb device is not active
[ 3.326078] [sw_udc]: sunxi_udc_pullup, is_on = 0
[ 3.331320] sunxi_udc_set_pullup_2317: usb device is not active
[ 3.337991] file system registered
[ 3.343776] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 3.351435] android_usb gadget: Number of LUNs=3
[ 3.356559] lun0: LUN: removable file: (no medium)
[ 3.361986] lun1: LUN: removable file: (no medium)
[ 3.367399] lun2: LUN: removable file: (no medium)
[ 3.373208] android_bind, serial_unique = 1
[ 3.377860] sunxi_udc_set_selfpowered_2300: usb device is not active
[ 3.384943] android_usb gadget: android_usb ready
[ 3.390196] [sw_hcd0]: usb host driver initialize........
[ 3.396281] [sw_hcd0]: open_usb_clock
[ 3.400681] [sunxi_hcd0]: host_init_state = 0
[ 3.405713] [sw_hcd0]: platform is usb host
[ 3.410448] [sw_hcd0]: sunxi_hcd_init_controller: sunxi_hcd_host0: USB Host mode controller at f1c19000 using PIO, IRQ 103
[ 3.422737] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
[ 3.429597] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 3
[ 3.439443] hub 3-0:1.0: USB hub found
[ 3.443642] hub 3-0:1.0: 1 port detected
[ 3.448381] [sw_hcd0]: sunxi_usb_host0_disable start
[ 3.453913] [sw_hcd0]: sunxi_hcd_wait_for_disconnect cnt=0
[ 3.460019] [sunxi_hcd_host0]: Set USB Power OFF
[ 3.465250] -------sunxi_hcd0_soft_disconnect---------
[ 3.470956] wrn: hcd is not enable, need not stop hcd
[ 3.476573] [sunxi_hcd_host0]: Set USB Power OFF
[ 3.481833] [sw_hcd0]: close_usb_clock
[ 3.486013] [sw_hcd0]: sunxi_usb_host0_disable end
[ 3.491729] mousedev: PS/2 mouse device common for all mice
[ 3.498508] hn sunxi_rtc_probe enter
[ 3.502632] hn rtc_device_register enter
[ 3.507097] hn rtc-sunxi.c sunxi_rtc_gettime enter
[ 3.512526] hn rtc-sunxi.c sunxi_rtc_settime enter
[ 3.517936] hn rtc-sunxi.c sunxi_rtc_gettime enter
[ 3.523365] hn rtc-sunxi.c sunxi_rtc_gettime enter
[ 3.528778] hn rtc_device_register rtc->name= sunxi-rtc
[ 3.534685] hn rtc_dev_prepare enter
[ 3.538891] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
[ 3.546461] sunxi cedar version 0.1
[ 3.550500] [cedar]: install start!!!
[ 3.554799] [cedar]: install end!!!
[ 3.561821] axp22_dcdc1: Failed to create debugfs directory
[ 3.569776] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 3.579233] Bluetooth: HCI UART driver ver 2.2
[ 3.584183] Bluetooth: HCI H4 protocol initialized
[ 3.589497] Bluetooth: HCI BCSP protocol initialized
[ 3.595120] usbcore: registered new interface driver btusb
[ 3.601225] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[ 3.607540] Bluetooth: BlueSleep Mode Driver Ver 1.1
[ 3.613796] autohotplug_init init ok
[ 3.617797] sunxi_cpufreq_initcall: clocks pll=1008000000,cpu=1008000000,axi=336000000
[ 3.626621] cur: pll=1008000000, cpudiv=1, axidiv=3
[ 3.632067] axp22_dcdc3: Failed to create debugfs directory
[ 3.638265] sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 1200MHz, min freq: 120MHz
[ 3.648994] -------------------CPU V-F Table--------------------
[ 3.655680] frequency = 1536000KHz voltage = 1500mv
[ 3.661307] frequency = 1344000KHz voltage = 1460mv
[ 3.666910] frequency = 1200000KHz voltage = 1320mv
[ 3.672528] frequency = 1008000KHz voltage = 1200mv
[ 3.678132] frequency = 816000KHz voltage = 1100mv
[ 3.683662] frequency = 648000KHz voltage = 1040mv
[ 3.689168] frequency = 0KHz voltage = 1040mv
[ 3.694498] frequency = 0KHz voltage = 1040mv
[ 3.699813] -----------------------------------------------------
[ 3.708980] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.85 2014-08-01 15:11) Compiled in Jan 24 2022 at 10:27:58
[ 3.720387] [mmc]: sunxi_mci_init
[ 3.724077] [mmc]: get mmc0's power supply 'axp22_dcdc1' ok
[ 3.730268] [mmc]: get mmc0's 2xmode fail
[ 3.734710] [mmc]: get mmc0's ddrmode fail
[ 3.739249] [mmc]: get mmc0's sdc_ex_dly_used failed, use default dly
[ 3.746413] [mmc]: get mmc1's sdc_power failed
[ 3.751350] [mmc]: get mmc1's 2xmode fail
[ 3.755792] [mmc]: get mmc1's ddrmode fail
[ 3.760343] [mmc]: get mmc1's sdc_ex_dly_used failed, use default dly
[ 3.767488] [mmc]: MMC host used card: 0x3, boot card: 0x0, io_card 2离线
刚学习,也不是很会看日志,感觉重点就是,但不知道怎么解决,求大佬看看
[ 3.708980] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.85 2014-08-01 15:11) Compiled in Jan 24 2022 at 10:27:58
[ 3.720387] [mmc]: sunxi_mci_init
[ 3.724077] [mmc]: get mmc0's power supply 'axp22_dcdc1' ok
[ 3.730268] [mmc]: get mmc0's 2xmode fail
[ 3.734710] [mmc]: get mmc0's ddrmode fail
[ 3.739249] [mmc]: get mmc0's sdc_ex_dly_used failed, use default dly
[ 3.746413] [mmc]: get mmc1's sdc_power failed
[ 3.751350] [mmc]: get mmc1's 2xmode fail
[ 3.755792] [mmc]: get mmc1's ddrmode fail
[ 3.760343] [mmc]: get mmc1's sdc_ex_dly_used failed, use default dly
[ 3.767488] [mmc]: MMC host used card: 0x3, boot card: 0x0, io_card 2离线