WhyCan Forum(哇酷开发者社区)

Wang

会员

注册时间： 2017-12-09

已发帖子： 13

积分： 3

4寸方屏GT911触摸驱动

显示已经ok了。目前调试触摸X轴坐标正常，Y轴坐标不对，参考了很多配置参数解决不了。有哪位调试过这款屏触摸吗

参数如下：

    0x61,0xE0,0x01,0xE0,0x01,0x01,0x05,0x00,0x01,0x08,
    0x19,0x05,0x4A,0x3A,0x03,0x0F,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x18,0x1A,0x1E,0x14,0x89,0x2A,0x09,
    0x2F,0x2B,0x88,0x13,0x00,0x00,0x01,0xB8,0x03,0x2D,
    0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x02,0x04,0x06,0x08,0x0A,0x0C,0x10,0x12,
    0x14,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x02,0x04,0x06,0x08,0x0A,0x0F,0x10,
    0x12,0x16,0x18,0x1C,0x1D,0x1E,0x1F,0x20,0x21,0x22,
    0x24,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,

Wang

会员

注册时间： 2017-12-09

已发帖子： 13

积分： 3

Re: 4寸方屏GT911触摸驱动

没看出来是怎么不对的？

从上往下滑，Y坐标先变大后变小。正常应该是逐渐变大

Wang

会员

注册时间： 2017-12-09

已发帖子： 13

积分： 3

Re: 4寸方屏GT911触摸驱动

没看出来是怎么不对的？

从上往下滑，Y坐标先变大后变小。正常应该是逐渐变大

可能gt911芯片里面固件有问题，可能触屏质量有问题，找一下卖家，看怎么说。

嗯，在联系卖家，感觉这玩意没技术支持，卖家也不懂