U-Boot 1.3.4 (Oct 10 2009 - 09:57:17)
DRAM: 64 MB
SST : SST39vF3201
Flash: 4 MB
*** Warning - bad CRC, using default environmentIn: serial
Out: serial
Err: serial
Net: macb0
macb0: Starting autonegotiation...
macb0: Autonegotiation timed out (status=0x7809)
macb0: link down (status: 0x7809)
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 22000000 ...
Image Name: Linux-2.6.28.7
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1478416 Bytes = 1.4 MB
Load Address: 20008000
Entry Point: 20008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OKStarting kernel ...
Uncompressing Linux................................................................................................ done, booting the kernel.
mr900e login:
串口线插入【配置串口】,默认115200 8 N 1, 显示以上信息.
离线
SEGGER J-Link Commander V4.50 ('?' for help)
Compiled Jun 1 2012 22:44:34
DLL version V4.50, compiled Jun 1 2012 22:44:17
Firmware: J-Link ARM V8 compiled Nov 28 2014 13:44:46
Hardware: V8.00
S/N: 20121126
Feature(s): RDI,FlashDL,FlashBP,JFlash
VTarget = 3.293V
Info: TotalIRLen = 4, IRPrint = 0x01
Found 1 JTAG device, Total IRLen = 4:
#0 Id: 0x0792603F, IRLen: 04, IRPrint: 0x1, ARM926EJ-S Core (Atmel)
Found ARM with core Id 0x0792603F (ARM9)
JTAG speed: 100 kHz
J-Link>
JLINK 信息.
离线
这古董我也淘了一台,atmel 9260太老了不想玩,接着吃灰。
离线
看来你家垃圾堆还是有不少好货
离线
哈哈,我还玩过9261,记得当初用 winarm 编译bootload。
估计有十年八年了。
离线