您尚未登录。

楼主 #1 2020-10-23 14:33:22

tang6397
会员
注册时间: 2020-06-27
已发帖子: 95
积分: 94.5

无数次启动u-boot, 原因何在?

F1c100s 64M 800480 u-boot 不使用FT卡, 直接烧写spi , 无数次启动u-boot, 原因何在?
能介绍一个F1c100s 64M 800480 flash是 MX25L256
能启动 f1c100s linux bsp 到 licheepi nano (app QT)的 u-boot 万分感谢!

离线

楼主 #2 2020-10-23 15:18:22

tang6397
会员
注册时间: 2020-06-27
已发帖子: 95
积分: 94.5

Re: 无数次启动u-boot, 原因何在?

https://whycan.cn/t_1008.html
下载 f1c100s_bsp_linux_split.7z
u-boot-2018.01

离线

楼主 #4 2020-10-23 15:39:48

tang6397
会员
注册时间: 2020-06-27
已发帖子: 95
积分: 94.5

Re: 无数次启动u-boot, 原因何在?

我首先要介决的是u-boot, 不是buildroot.

离线

楼主 #6 2020-10-23 17:22:33

tang6397
会员
注册时间: 2020-06-27
已发帖子: 95
积分: 94.5

Re: 无数次启动u-boot, 原因何在?

我不发f1c100启动画面, 我慢慢模着补上

离线

楼主 #7 2020-10-23 17:32:20

tang6397
会员
注册时间: 2020-06-27
已发帖子: 95
积分: 94.5

Re: 无数次启动u-boot, 原因何在?

我不会发f1c100启动画面, 我慢慢模着补上

离线

楼主 #8 2020-10-23 17:34:53

tang6397
会员
注册时间: 2020-06-27
已发帖子: 95
积分: 94.5

Re: 无数次启动u-boot, 原因何在?

r7 : 00ff0000  r6 : 000099f1     r5 : 00009900  r4 : 816fbd6c
r3 : 00000fe9  r2 : 00000cd3     r1 : 816fbd6c  r0 : 816fbd6c
Flags: nzCv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

resetting ...

U-Boot SPL 2018.01-05679-g013ca45-dirty (Oct 22 2020 - 02:25:57)
DRAM: 64 MiB
Trying to boot from MMC1
Card did not respond to voltage select!
mmc_init: -95, time 22
spl: mmc init failed with error: -95
Trying to boot from sunxi SPI


U-Boot 2018.01-05679-g013ca45-dirty (Oct 22 2020 - 02:25:57 -0700) Allwinner Technology

CPU:   Allwinner F Series (SUNIV)
Model: Lichee Pi Nano
DRAM:  64 MiB
MMC:   SUNXI SD/MMC: 0
SF: Detected w25q128bv with page size 256 Bytes, erase size 4 KiB, total 16 MiB
Setting up a 800x480 lcd console (overscan 0x0)
In:    serial@1c25000
Out:   serial@1c25000
Err:   serial@1c25000
Net:   No ethernet found.
starting USB...
No controllers found
Hit any key to stop autoboot:  2  1  0
SF: Detected w25q128bv with page size 256 Bytes, erase size 4 KiB, total 16 MiB
device 0 offset 0x100000, size 0x250000

离线

楼主 #9 2020-10-23 17:51:53

tang6397
会员
注册时间: 2020-06-27
已发帖子: 95
积分: 94.5

Re: 无数次启动u-boot, 原因何在?

我将u-boot-2018.01 make ARCH=arm menuconfig
配置只改 LCD 480272-->800480 保存后, make -j8
将生存u-boot.bin, 代替如下括号里文件, 烧写(非FT卡),
开杌 u-boot 串口显示, 无数次启动u-boot.
( https://whycan.cn/t_1008.html
下载 f1c100s_bsp_linux_split.7z )

离线

楼主 #11 2020-10-23 19:04:53

tang6397
会员
注册时间: 2020-06-27
已发帖子: 95
积分: 94.5

Re: 无数次启动u-boot, 原因何在?

device 0 offset 0x350000, size 0x7000
SF: 28672 bytes @ 0x350000 Read: OK
## Flattened Device Tree blob at 80c00000
   Booting using the fdt blob at 0x80c00000
   reserving fdt memory region: addr=81000000 size=10000
   Loading Device Tree to 816f6000, end 816ff9f0 ... OK
undefined instruction
pc : [<82f99cdc>]       lr : [<82f99cc9>]
reloc pc : [<81729cdc>]       lr : [<81729cc9>]
sp : 82e65a00  ip : fffd1da0     fp : 00000017
r10: deadbeef  r9 : 82e67ee8     r8 : 82f702a0
r7 : 00ff0000  r6 : 000099f1     r5 : 00009900  r4 : 816fbd6c
r3 : 00000fe9  r2 : 00000cd3     r1 : 816fbd6c  r0 : 816fbd6c
Flags: nzCv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

resetting ...

U-Boot SPL 2018.01-05679-g013ca45-dirty (Oct 22 2020 - 02:25:57)
DRAM: 64 MiB
Trying to boot from MMC1
Card did not respond to voltage select!
mmc_init: -95, time 22
spl: mmc init failed with error: -95
Trying to boot from sunxi SPI


U-Boot 2018.01-05679-g013ca45-dirty (Oct 22 2020 - 02:25:57 -0700) Allwinner Technology

CPU:   Allwinner F Series (SUNIV)
Model: Lichee Pi Nano
DRAM:  64 MiB
MMC:   SUNXI SD/MMC: 0
SF: Detected w25q128bv with page size 256 Bytes, erase size 4 KiB, total 16 MiB

离线

楼主 #12 2020-10-23 19:06:32

tang6397
会员
注册时间: 2020-06-27
已发帖子: 95
积分: 94.5

Re: 无数次启动u-boot, 原因何在?

永远是没完没了的重启u-boot

离线

楼主 #13 2020-10-23 19:31:19

tang6397
会员
注册时间: 2020-06-27
已发帖子: 95
积分: 94.5

Re: 无数次启动u-boot, 原因何在?

U-Boot 2018.01-05679-g013ca45-dirty (Oct 22 2020 - 02:25:57 -0700) Allwinner Technology

CPU:   Allwinner F Series (SUNIV)
Model: Lichee Pi Nano
DRAM:  64 MiB
MMC:   SUNXI SD/MMC: 0
SF: Detected w25q128bv with page size 256 Bytes, erase size 4 KiB, total 16 MiB
Setting up a 800x480 lcd console (overscan 0x0)
In:    serial@1c25000
Out:   serial@1c25000
Err:   serial@1c25000
Net:   No ethernet found.
starting USB...
No controllers found
Hit any key to stop autoboot:  2  1  0
SF: Detected w25q128bv with page size 256 Bytes, erase size 4 KiB, total 16 MiB
device 0 offset 0x100000, size 0x250000
SF: 2424832 bytes @ 0x100000 Read: OK
device 0 offset 0x350000, size 0x7000
SF: 28672 bytes @ 0x350000 Read: OK
## Flattened Device Tree blob at 80c00000
   Booting using the fdt blob at 0x80c00000
   reserving fdt memory region: addr=81000000 size=10000
   Loading Device Tree to 816f6000, end 816ff9f0 ... OK
undefined instruction
pc : [<82f99cdc>]       lr : [<82f99cc9>]
reloc pc : [<81729cdc>]       lr : [<81729cc9>]
sp : 82e65a00  ip : fffd1da0     fp : 00000017
r10: deadbeef  r9 : 82e67ee8     r8 : 82f702a0
r7 : 00ff0000  r6 : 000099f1     r5 : 00009900  r4 : 816fbd6c
r3 : 00000fe9  r2 : 00000cd3     r1 : 816fbd6c  r0 : 816fbd6c
Flags: nzCv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

离线

楼主 #14 2020-10-23 19:32:44

tang6397
会员
注册时间: 2020-06-27
已发帖子: 95
积分: 94.5

Re: 无数次启动u-boot, 原因何在?

resetting ...

U-Boot SPL 2018.01-05679-g013ca45-dirty (Oct 22 2020 - 02:25:57)
DRAM: 64 MiB
Trying to boot from MMC1
Card did not respond to voltage select!
mmc_init: -95, time 21
spl: mmc init failed with error: -95
Trying to boot from sunxi SPI


U-Boot 2018.01-05679-g013ca45-dirty (Oct 22 2020 - 02:25:57 -0700) Allwinner Technology

CPU:   Allwinner F Series (SUNIV)
Model: Lichee Pi Nano
DRAM:  64 MiB
MMC:   SUNXI SD/MMC: 0
SF: Detected w25q128bv with page size 256 Bytes, erase size 4 KiB, total 16 MiB
Setting up a 800x480 lcd console (overscan 0x0)
In:    serial@1c25000
Out:   serial@1c25000
Err:   serial@1c25000
Net:   No ethernet found.
starting USB...
No controllers found
Hit any key to stop autoboot:  2  1  0
SF: Detected w25q128bv with page size 256 Bytes, erase size 4 KiB, total 16 MiB
device 0 offset 0x100000, size 0x250000
SF: 2424832 bytes @ 0x100000 Read: OK
device 0 offset 0x350000, size 0x7000
SF: 28672 bytes @ 0x350000 Read: OK
## Flattened Device Tree blob at 80c00000
   Booting using the fdt blob at 0x80c00000
   reserving fdt memory region: addr=81000000 size=10000

离线

页脚

工信部备案:粤ICP备20025096号 Powered by FluxBB

感谢为中文互联网持续输出优质内容的各位老铁们。 QQ: 516333132, 微信(wechat): whycan_cn (哇酷网/挖坑网/填坑网) service@whycan.cn