您尚未登录。

楼主 # 2021-07-16 11:44:18

tigger
Moderator
注册时间: 2021-06-18
已发帖子: 172
积分: 111

请问 D1 的 dts

&uart1 {
        pinctrl-names = "default", "sleep";
        pinctrl-0 = <&uart1_pins_a>;
        pinctrl-1 = <&uart1_pins_b>;
        status = "okay";
};
        uart1_pins_a: uart1_pins@0 {  /* For EVB1 board */
                pins = "PG6", "PG7", "PG8", "PG9";
                function = "uart1";
                drive-strength = <10>;
                bias-pull-up;
        };

        uart1_pins_b: uart1_pins {  /* For EVB1 board */
                pins = "PG6", "PG7", "PG8", "PG9";
                function = "gpio_in";
        };

请问 pinctrl-0, pinctrl-1 怎么理解?

离线

页脚

工信部备案:粤ICP备20025096号 Powered by FluxBB

感谢为中文互联网持续输出优质内容的各位老铁们。 QQ: 516333132, 微信(wechat): whycan_cn (哇酷网/挖坑网/填坑网) service@whycan.cn