好消息，Xilinx放出了FTDI下载器的制作工具

metro · 2022-09-01 20:00:10

原帖见Programming FTDI Devices for Vivado Hardware Manager Support，注意需要安装最新的Vivado 2022.1。

使用方法很简单，亲测可行。支持FT232H/FT2232H/FT4232H。

最后贴一下命令的使用方法：

program_ftdi
Short Description
Write/Read to FTDI EEPROM for Xilinx JTAG Tools support
Syntax:
program_ftdi {-write -ftdi=<ftdi_part> -serial=<serial_number> [-vendor=<vendor_name>][-board=<board_name>][-m=<manufacturer>][-desc=<description>] |
-write -filein=<cfg_filein> |
-read [-fileout=<cfg_fileout>]} [-help][-longhelp]
Usage:
Name Description
-------------------------------------------------------------------------------------
-ftdi Specify the ftdi device to be programmed <FT232H | FT2232H | FT4232H>
-serial Serial number to be written into the EEPROM
[-vendor] Vendor information
[-board ] Name of the board being programmed
[-mfg ] Manufacturer information
[-desc ] A short description of the board
-file_in Input file with all fields to be written
[-file_out] File to which the FDI EEPROM should be read back

Description:
program_ftdi writes/reads the fdti part according to the option specified.
When called with write, either -ftdi and -serial must be used or -filein with -ftdi must be specified. The Xilinx supported configuration for the part specified using -ftdi flag is written into the EEPROM.
-vendor, --board, -m and -desc are optional arguments which can be used to specify more details to be written. All strings must be specified within inverted commas ("").
When used with read, the command reads back the content of FTDI EEPROM to standard out. if -fileout option is used, the read back information is written to the file specified.
If no arguments are passed, FTDI communication is skipped and help menu is printed.
Restrictions:
Only the 1st ftdi part found will be programmed/read. If more than 1 ftdi device is detected this command will error out.
Arguments:
-write - Write the FTDI EEPROM with either the options specifed with command line option of by a given input configuration file.
-read - Read the contents of the FTDI device detected in chain.
-ftdi - (Required field) Specify the ftdi device to be programmed <FT232H | FT2232H | FT4232H>
This programs the ftdi part according to the supported configuration for the specified device
-serial - (Required field) Serial number to be written into the EEPROM
The serial number can have digits and/or alphabets. no special characters may be used.
-vendor - (Optional field) Vendor information
The vendor information should contain vendor name and other details as a string.
-board - (Optional field) Name of the board being programmed
A board name can be written into FTDI using this argument.
-m - (Optional field) Manufacturer information
The Manufacturer information should contain Manufacturer name and other details as a string.
-desc - (Optional field) A short description of the board
-filein - (Required field) Input file with all fields to be written
If this argument is used, an input file with details about the FTDI device, serial number etc should be specified.
-fileout - (Optional field) File to which the FDI EEPROM should be read back

metro · 2022-09-02 11:04:05

echo 说：

FTDI芯片太贵，CH552模拟才是王道

最近在玩CH32V203G6，批量价格2块左右，性能比CH552强了很多，感觉挺适合做调试器。

metro · 2022-09-02 16:40:41

Fanserasery 说：

草我昨天找到的你就发了

嘿嘿嘿🥵🥵🥵

WhyCan Forum(哇酷开发者社区)

楼主 # 2022-09-01 20:00:10 分享评论

好消息，Xilinx放出了FTDI下载器的制作工具

楼主 #2 2022-09-02 11:04:05 分享评论

Re: 好消息，Xilinx放出了FTDI下载器的制作工具

楼主 #4 2022-09-02 16:40:41 分享评论

Re: 好消息，Xilinx放出了FTDI下载器的制作工具

页脚