WhyCan Forum(哇酷开发者社区)

Ozelot

会员

所在地： Ukraine

注册时间： 2020-06-22

已发帖子： 52

积分： 36

个人网站

Bare metal USB-host example (F1C100S)

This is a simple USB Host implementation in bare metal with supporting Mass Storage Device. In this example, the program reads a file from the drive and copies its contents to another file: GitHub

lanlanzhilian

会员

注册时间： 2021-12-21

已发帖子： 130

积分： 60

Re: Bare metal USB-host example (F1C100S)

Very tasty

Neil

会员

注册时间： 2021-04-04

已发帖子： 2

积分： 1.5

Re: Bare metal USB-host example (F1C100S)

This is a very nice topic.

Ozelot

会员

所在地： Ukraine

注册时间： 2020-06-22

已发帖子： 52

积分： 36

个人网站

Re: Bare metal USB-host example (F1C100S)

Example of using USB-Ethernet adapter and lwIP-library.
Adapters based on the RTL8152B chip are supported. The driver from u-boot was taken as the base. This program runs on bare metal and depends on the lwIP TCP/IP stack. In this example, the available services are ping, iperf, and http server. At the same time, iperf demonstrated the use of a bandwidth of more than 90Mbits/sec.
Link: GitHub

三哥

会员

注册时间： 2018-08-03

已发帖子： 72

积分： 44.5

Re: Bare metal USB-host example (F1C100S)

楼主，我用了你的代码，读U盘时卡在这里，能帮忙看一下是什么问题不？谢谢
bulk_in（）函数里面，执行wait_csr（）时一直不能返回