WhyCan Forum(哇酷开发者社区)

U-Boot SPL 2018.01-05676-g00188782ee (Apr 08 2018 - 16:10:25)
DRAM: 64 MiB
Tryi

U-Boot SPL 2023.04-rc3 (Mar 04 2023 - 14:07:34 +0800)
DRAM: 64 MiB
Trying to boot from MMC1


U-Boot 2023.04-rc3 (Mar 04 2023 - 14:07:34 +0800) Allwinner Technology

CPU:   Allwinner F Series (SUNIV)
Model: Allwinner F1C
DRAM:  64 MiB
Core:  27 devices, 15 uclasses, devicetree: separate
WDT:   Not starting watchdog@1c20ca0
MMC:   mmc@1c0f000: 0
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1... 
Unknown monitor
Unknown monitor
In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0 
5194352 bytes read in 218 ms (22.7 MiB/s)
6000 bytes read in 2 ms (2.9 MiB/s)
Kernel image @ 0x80008000 [ 0x000000 - 0x4f4270 ]
## Flattened Device Tree blob at 80c08000
   Booting using the fdt blob at 0x80c08000
Working FDT set to 80c08000
   Loading Device Tree to 816fb000, end 816ff76f ... OK
Working FDT set to 816fb000
DE is present but not probed

Starting kernel ...

console=ttyS0,115200 panic=5 rootwait root=/dev/mmcblk0p2 earlyprintk rw

load mmc 0:1 0x80008000 zImage;load mmc 0:1 0x80c08000 myf1c.dtb;bootz 0x80008000 - 0x80c08000;

U-Boot SPL 2018.01-05682-gd83b2fe-dirty (Aug 27 2019 - 15:04:43)
DRAM: 64 MiB
Trying to boot from MMC1


U-Boot 2018.01-05682-gd83b2fe-dirty (Aug 27 2019 - 15:04:43 +0800) Allwinner Technology

CPU:   Allwinner F Series (SUNIV)
Model: Lichee Pi Nano
DRAM:  64 MiB
MMC:   SUNXI SD/MMC: 0
Using default environment

Setting up a 800x480 lcd console (overscan 0x0)
In:    serial@1c25000
Out:   serial@1c25000
Err:   serial@1c25000
Hit any key to stop autoboot:  0 
reading zImage
3891016 bytes read in 202 ms (18.4 MiB/s)
reading splash.bmp
385078 bytes read in 40 ms (9.2 MiB/s)
reading dtb.bin
10119 bytes read in 23 ms (428.7 KiB/s)
## Flattened Device Tree blob at 80c00000
   Booting using the fdt blob at 0x80c00000
   Loading Device Tree to 82e69000, end 82e6e786 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.15.0-licheepi-nano+ (root@ubuntu) (gcc version 7.4.0 (Buildroot 2019.02.2)) #29
[    0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] OF: fdt: Machine model: Lichee Pi Nano
[    0.000000] Memory policy: Data cache writeback
[    0.000000] random: fast init done
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: console=ttyS0,115200 panic=5 rootwait root=/dev/mmcblk0p2 rw vt.global_cu0
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Memory: 55160K/65536K available (6144K kernel code, 236K rwdata, 1412K rodata, 1024K init, 245)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc4800000 - 0xff800000   ( 944 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc4000000   (  64 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (7136 kB)
[    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
[    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   ( 237 kB)
[    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   ( 246 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000052] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000121] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000749] Console: colour dummy device 80x30
[    0.000846] Calibrating delay loop... 203.16 BogoMIPS (lpj=1015808)
[    0.070247] pid_max: default: 32768 minimum: 301
[    0.070581] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070628] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.072201] CPU: Testing write buffer coherency: ok
[    0.074061] Setting up static identity map for 0x80100000 - 0x80100058
[    0.076759] devtmpfs: initialized
[    0.084562] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 s
[    0.084629] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.084912] pinctrl core: initialized pinctrl subsystem
[    0.087174] NET: Registered protocol family 16
[    0.089001] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.091122] cpuidle: using governor menu
[    0.119919] SCSI subsystem initialized
[    0.120450] usbcore: registered new interface driver usbfs
[    0.120618] usbcore: registered new interface driver hub
[    0.120840] usbcore: registered new device driver usb
[    0.121341] pps_core: LinuxPPS API ver. 1 registered
[    0.121366] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.121423] PTP clock support registered
[    0.121944] Advanced Linux Sound Architecture Driver Initialized.
[    0.124015] clocksource: Switched to clocksource timer
[    0.152791] NET: Registered protocol family 2
[    0.154482] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.154565] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.154623] TCP: Hash tables configured (established 1024 bind 1024)
[    0.154967] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.155028] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.155571] NET: Registered protocol family 1
[    0.156900] RPC: Registered named UNIX socket transport module.
[    0.156947] RPC: Registered udp transport module.
[    0.156963] RPC: Registered tcp transport module.
[    0.156979] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.159254] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.161274] Initialise system trusted keyrings
[    0.161856] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[    0.180254] NFS: Registering the id_resolver key type
[    0.180332] Key type id_resolver registered
[    0.180350] Key type id_legacy registered
[    0.180461] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.195746] Key type asymmetric registered
[    0.195785] Asymmetric key parser 'x509' registered
[    0.195976] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.196007] io scheduler noop registered
[    0.196028] io scheduler deadline registered
[    0.196833] io scheduler cfq registered (default)
[    0.196870] io scheduler mq-deadline registered
[    0.196890] io scheduler kyber registered
[    0.198232] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
[    0.208682] suniv-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.396199] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.403202] console [ttyS0] disabled
[    0.423481] 1c25000.serial: ttyS0 at MMIO 0x1c25000 (irq = 27, base_baud = 6250000) is a 16550A
[    0.896739] console [ttyS0] enabled
[    0.923088] 1c25800.serial: ttyS2 at MMIO 0x1c25800 (irq = 28, base_baud = 6250000) is a 16550A
[    0.940233] panel-simple panel: panel supply power not found, using dummy regulator
[    0.949578] SCSI Media Changer driver v0.25 
[    0.957934] m25p80 spi0.0: unrecognized JEDEC id bytes: 00, 00, 00
[    0.964921] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.971455] ehci-platform: EHCI generic platform driver
[    0.977127] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.983362] ohci-platform: OHCI generic platform driver
[    0.989141] usbcore: registered new interface driver usb-storage
[    0.997300] input: 1c23400.lradc as /devices/platform/soc/1c23400.lradc/input/input0
[    1.007762] input: 1c24800.rtp as /devices/platform/soc/1c24800.rtp/input/input1
[    1.016265] i2c /dev entries driver
[    3.124098] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[    3.130664] rtc-pcf8563 0-0051: pcf8563_write_block_data: err=-110 addr=0e, data=03
[    3.138378] rtc-pcf8563 0-0051: pcf8563_probe: write error
[    3.143986] rtc-pcf8563: probe of 0-0051 failed with error -5
[    3.152320] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    3.214162] sunxi-mmc 1c0f000.mmc: base:0xabd39341 irq:20
[    3.221872] usbcore: registered new interface driver usbhid
[    3.227581] usbhid: USB HID core driver
[    3.250916] NET: Registered protocol family 17
[    3.255748] Key type dns_resolver registered
[    3.262501] Loading compiled-in X.509 certificates
[    3.282553] sun4i-drm display-engine: bound 1e60000.display-backend (ops 0xc0739c18)
[    3.291492] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xc0738efc)
[    3.299273] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.305930] [drm] No driver support for vblank timestamp query.
[    3.351512] mmc0: host does not support reading read-only switch, assuming write-enable
[    3.353646] mmc0: new high speed SDXC card at address 59b4
[    3.354883] mmcblk0: mmc0:59b4 SD    57.8 GiB 
[    3.357538]  mmcblk0: p1 p2
[    3.505136] Console: switching to colour frame buffer device 100x30
[    3.564690] sun4i-drm display-engine: fb0:  frame buffer device
[    3.571989] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
[    3.581253] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dumr
[    3.593285] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    3.599240] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    3.609414] hub 1-0:1.0: USB hub found
[    3.613345] hub 1-0:1.0: 1 port detected
[    3.619344] hctosys: unable to open rtc device (rtc0)
[    3.625025] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.642489] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.649406] ALSA device list:
[    3.652399]   #0: Loopback 1
[    3.656268] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.665025] cfg80211: failed to load regulatory.db
[    3.672642] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    3.720313] EXT4-fs (mmcblk0p2): recovery complete
[    3.731937] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.740291] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    3.749606] devtmpfs: mounted
[    3.760121] Freeing unused kernel memory: 1024K
[    3.929073] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
Starting syslogd: OK
uVideoSize = 0x177000
var.xres = 0x320
var.yres = 0x1e0
pVideoBuffer = 0xb6dd8000
Touch Task thread
Touch Task start
Main Task thread
Starting klogd: OK
Starting mdev...
[    6.475334] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fs.
Initializing random number generator... done.
Starting network: OK
[   10.901051] file system registered
install_listener('tcp:5037','*smartsocket*')
[   11.231481] read descriptors
[   11.241498] read strings
[   11.244475] g_ffs gadget: g_ffs ready
[   11.262886] uart closed, irq=27 ..................... 

Welcome to Buildroot
buildroot login: 
 

U-Boot SPL 2023.04-rc4 (Mar 17 2023 - 21:26:23 +0800)
DRAM: 64 MiB
Trying to boot from MMC1


U-Boot 2023.04-rc4 (Mar 17 2023 - 21:26:23 +0800) Allwinner Technology

CPU:   Allwinner F Series (SUNIV)
Model: Allwinner F1C
DRAM:  64 MiB
Core:  27 devices, 15 uclasses, devicetree: separate
WDT:   Not starting watchdog@1c20ca0
MMC:   mmc@1c0f000: 0
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1... 
Unknown monitor
Unknown monitor
In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0 
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
256 bytes read in 2 ms (125 KiB/s)
## Executing script at 81d40000
4588720 bytes read in 194 ms (22.6 MiB/s)
5877 bytes read in 3 ms (1.9 MiB/s)
Kernel image @ 0x80008000 [ 0x000000 - 0x4604b0 ]
## Flattened Device Tree blob at 80c08000
   Booting using the fdt blob at 0x80c08000
Working FDT set to 80c08000
   Loading Device Tree to 816fb000, end 816ff6f4 ... OK
Working FDT set to 816fb000
DE is present but not probed

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.10.175 (zhou2008@zhou2008-Arch) (arm-none-eabi-gcc (Arch Repository) 12.2.0, GNU ld (GNU Binutils) 2.39) #3 Sat Mar 18 17:07:31 CST 2023
[    0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] OF: fdt: Machine model: Allwinner F1C
[    0.000000] Memory policy: Data cache writeback
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000080000000-0x0000000083ffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x0000000083ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000083ffffff]
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: console=ttyS0,115200 panic=5 rootwait root=/dev/mmcblk0p2 earlyprintk rw
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 53592K/65536K available (7168K kernel code, 804K rwdata, 1580K rodata, 1024K init, 236K bss, 11944K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000053] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000150] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000815] Console: colour dummy device 80x30
[    0.000932] Calibrating delay loop... 203.16 BogoMIPS (lpj=1015808)
[    0.070288] pid_max: default: 32768 minimum: 301
[    0.070846] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.070903] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.072741] CPU: Testing write buffer coherency: ok
[    0.075065] Setting up static identity map for 0x80100000 - 0x80100058
[    0.076541] devtmpfs: initialized
[    0.081737] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.081822] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[    0.082147] pinctrl core: initialized pinctrl subsystem
[    0.085554] NET: Registered protocol family 16
[    0.086911] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.089223] thermal_sys: Registered thermal governor 'step_wise'
[    0.089369] cpuidle: using governor menu
[    0.126540] usbcore: registered new interface driver usbfs
[    0.126729] usbcore: registered new interface driver hub
[    0.126892] usbcore: registered new device driver usb
[    0.127328] pps_core: LinuxPPS API ver. 1 registered
[    0.127364] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.128090] Advanced Linux Sound Architecture Driver Initialized.
[    0.130476] clocksource: Switched to clocksource timer
[    0.160584] NET: Registered protocol family 2
[    0.161193] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.162585] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.162720] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.162786] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.162840] TCP: Hash tables configured (established 1024 bind 1024)
[    0.163124] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.163195] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.163732] NET: Registered protocol family 1
[    0.167548] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.169249] Initialise system trusted keyrings
[    0.170009] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[    0.494950] Key type asymmetric registered
[    0.495013] Asymmetric key parser 'x509' registered
[    0.495193] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.495236] io scheduler mq-deadline registered
[    0.495262] io scheduler kyber registered
[    0.506408] suniv-f1c100s-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.687103] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.693107] suniv-f1c100s-pinctrl 1c20800.pinctrl: supply vcc-pe not found, using dummy regulator
[    0.695046] printk: console [ttyS0] disabled
[    0.715442] 1c25000.serial: ttyS0 at MMIO 0x1c25000 (irq = 25, base_baud = 6250000) is a 16550A
[    1.134812] printk: console [ttyS0] enabled
[    1.147412] suniv-f1c100s-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dummy regulator
[    1.160244] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.166910] ehci-platform: EHCI generic platform driver
[    1.172464] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.178713] ohci-platform: OHCI generic platform driver
[    1.184803] udc-core: couldn't find an available UDC - added [zero] to list of pending drivers
[    1.193763] i2c /dev entries driver
[    1.199061] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    1.210210] usbcore: registered new interface driver usbhid
[    1.215917] usbhid: USB HID core driver
[    1.219765] TESETS hava!
[    1.222348] ESP8089_init Enter
[    2.822052] esp8089_spi: No dev using spi! 
[    2.826884] esp8089_spi: esp_spi_dummy_probe enter
[    2.831909] esp8089_spi: register board OK
[    2.836018] esp8089_spi: sem_timeout = 0
[    2.840446] suniv-f1c100s-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    2.877963] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
[    2.923396] mmc0: new high speed SDXC card at address 59b4
[    2.930974] mmcblk0: mmc0:59b4 SD    57.8 GiB 
[    2.940052]  mmcblk0: p1 p2
[    3.050976] esp8089 spi0.0: succeed get all info from dt!
[    3.050976]  
[    3.057967] esp8089 spi0.0: succeed Cover esp_interrupt esp_reset_gpio !
[    3.057967]  
[    3.066322] esp8089 spi0.0: interrupt_gpio: 105, reset_gpio : 104!
[    3.066322]  
[    3.074110] esp8089 spi0.0: Finish got dt data
[    3.078555] esp8089_spi: esp_spi_probe ENTER
[    3.082860] esp8089_spi: esp_spi_probe Set CS LOW
[    3.087648] suniv-f1c100s-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
[    3.096912] esp8089_spi: esp_setup_spi
[    3.100798] esp8089_spi: sif_spi_protocol_init
[    3.105254] esp8089_spi: drivers/staging/esp8089/spi_sif_esp.c, 1563
[    3.111642] esp8089_spi: fail_count = 0
[    3.217257] rx:[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff]
[    3.324874] esp8089_spi: drivers/staging/esp8089/spi_sif_esp.c, 1563
[    3.331257] esp8089_spi: fail_count = 1
[    3.436838] rx:[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff]
[    3.544453] esp8089_spi: drivers/staging/esp8089/spi_sif_esp.c, 1563
[    3.550840] esp8089_spi: fail_count = 2
[    3.656377] rx:[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff]
[    3.763982] esp8089_spi: drivers/staging/esp8089/spi_sif_esp.c, 1563
[    3.770334] esp8089_spi: fail_count = 3
[    3.875898] rx:[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff]
[    3.983527] esp8089_spi: drivers/staging/esp8089/spi_sif_esp.c, 1563
[    3.989879] esp8089_spi: fail_count = 4
[    4.095491] rx:[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff]
[    4.203166] esp8089_spi: drivers/staging/esp8089/spi_sif_esp.c, 1563
[    4.209519] esp8089_spi: fail_count = 5
[    4.315092] rx:[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff]
[    4.422702] esp8089_spi: drivers/staging/esp8089/spi_sif_esp.c, 1563
[    4.429056] esp8089_spi: fail_count = 6
[    4.534644] rx:[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff]
[    4.642252] esp8089_spi: drivers/staging/esp8089/spi_sif_esp.c, 1563
[    4.648603] esp8089_spi: fail_count = 7
[    4.754152] rx:[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff]
[    4.861770] esp8089_spi: drivers/staging/esp8089/spi_sif_esp.c, 1563
[    4.868122] esp8089_spi: fail_count = 8
[    4.973674] rx:[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff]
[    5.081322] esp8089_spi: drivers/staging/esp8089/spi_sif_esp.c, 1563
[    5.087676] esp8089_spi: fail_count = 9
[    5.193300] rx:[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff]
[    5.300959] esp8089_spi: drivers/staging/esp8089/spi_sif_esp.c, 1563
[    5.307311] esp8089_spi: fail_count = 10
[    5.412970] rx:[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff],[0xff]
[    5.520583] esp8089_spi: first error exit
[    5.524608] esp8089_spi: esp_spi_probe EXIT
[    5.528848] esp8089: probe of spi0.0 failed with error -110
[    5.534590] esp8089_spi: sem_timeout = 0
[    5.538526] esp8089_spi: esp_spi_init err 0
[    5.559065] NET: Registered protocol family 10
[    5.566466] Segment Routing with IPv6
[    5.570563] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    5.579386] Loading compiled-in X.509 certificates
[    5.595994] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.614865] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.621764] ALSA device list:
[    5.624764]   #0: Loopback 1
[    5.628606] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    5.637344] cfg80211: failed to load regulatory.db
[    5.780589] EXT4-fs (mmcblk0p2): recovery complete
[    5.791572] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    5.799826] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    5.808920] devtmpfs: mounted
[    5.816558] Freeing unused kernel memory: 1024K
[    5.821322] Run /sbin/init as init process
[    5.943345] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
Initializing random number generator: OK
Saving random seed: [    6.555855] random: dd: uninitialized urandom read (32 bytes read)
OK
Starting network: OK

Welcome to Buildroot
buildroot login: 

// SPDX-License-Identifier: (GPL-2.0+ OR X11)
/*
 * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
 */

/dts-v1/;
#include "suniv-f1c100s.dtsi"

/ {
        model = "Allwinner F1C";
        compatible = "allwinner,suniv-f1c100s";

        aliases {
                serial0 = &uart0;
                mmc0 = &mmc0;
                spi0 = &spi0;
        };

        chosen {
                stdout-path = "serial0:115200n8";
        };

        reg_vcc3v3: vcc3v3 {
                compatible = "regulator-fixed";
                regulator-name = "vcc3v3";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
        };
};

&pio {
    spi0_pd_pins: spi0-pd-pins {
        pins = "PD20", "PD18", "PD21", "PD19";
        function = "spi0";
    };
};

&spi0 {
    pinctrl-names = "default";
    pinctrl-0 = <&spi0_pd_pins>;
    status = "okay";

    esp8089@0 {
            status = "okay";
            compatible = "boss,esp8089";
            spi-cpol;
            spi-cpha;
            reg = <0>;
            spi-max-frequency = <30000000>;
            reset= <104>; // PD7
            interrupt= <105>; // PD8 
            debug= <0>;
    };
};

&mmc0 {
        broken-cd;
        bus-width = <4>;
        disable-wp;
        status = "okay";
        vmmc-supply = <&reg_vcc3v3>;
};

&uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_pe_pins>;
        status = "okay";
};

&usb_otg {
    dr_mode = "host"; /* 三个可选项: otg / host / peripheral */
    status = "okay";
};