WhyCan Forum(哇酷开发者社区)

我要把这个系统  放到荔枝派ZERO 的板子上试一下能播放视频不，期待中

下载到固件试一下，认真看了一下是FLASH版的，有没有SD版的 想播放视频怎么操作

Linux内核启动成功，值得庆祝

U-Boot 2017.01-rc2-00075-gec3f3ba-dirty (Dec 15 2017 - 14:00:51 +0800) Allwinner Technology

CPU:   Allwinner V3s (SUN8I 1681)
Model: Lichee Pi Zero
DRAM:  64 MiB
MMC:   SUNXI SD/MMC: 0
SF: unrecognized JEDEC id bytes: 00, 00, 00
*** Warning - spi_flash_probe() failed, using default environment

Setting up a 800x480 lcd console (overscan 0x0)
dotclock: 33000kHz = 33000kHz: (1 * 3MHz * 66) / 6
In:    serial@01c28000
Out:   serial@01c28000
Err:   serial@01c28000
Net:   phy interface0
eth0: ethernet@1c30000
starting USB...
No controllers found
Hit any key to stop autoboot:  0
reading zImage
4016104 bytes read in 636 ms (6 MiB/s)
reading sun8i-v3s-licheepi-zero-dock.dtb
11803 bytes read in 29 ms (397.5 KiB/s)
## Flattened Device Tree blob at 41800000
   Booting using the fdt blob at 0x41800000
   Loading Device Tree to 42dfa000, end 42dffe1a ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.13.0-licheepi-zero+ (hexing@ubuntu) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1)) #46 SMP Fri Dec 15 14:36:43 CST 2017
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Lichee Pi Zero with Dock
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] percpu: Embedded 16 pages/cpu @c3de6000 s33920 r8192 d23424 u65536
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 15883
[    0.000000] Kernel command line: console=ttyS0,115200 panic=5 mtdparts=spi32766.0:1M(uboot),64k(dtb),4M(kernel),-(rootfs) rootwait root=/dev/mmcblk0p2 earlyprintk rw 

vt.global_cursor_default=0
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Memory: 53572K/64036K available (6144K kernel code, 222K rwdata, 1480K rodata, 1024K init, 266K bss, 10464K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc4000000 - 0xff800000   ( 952 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc3e89000   (  62 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0700000   (7136 kB)
[    0.000000]       .init : 0xc0900000 - 0xc0a00000   (1024 kB)
[    0.000000]       .data : 0xc0a00000 - 0xc0a37b00   ( 223 kB)
[    0.000000]        .bss : 0xc0a3ebec - 0xc0a8153c   ( 267 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU event tracing is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000017] Switching to timer-based delay loop, resolution 41ns
[    0.000183] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000417] Console: colour dummy device 80x30
[    0.000454] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000469] pid_max: default: 32768 minimum: 301
[    0.000597] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000611] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001213] CPU: Testing write buffer coherency: ok
[    0.001599] /cpus/cpu@0 missing clock-frequency property
[    0.001623] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002061] Setting up static identity map for 0x40100000 - 0x40100060
[    0.002237] Hierarchical SRCU implementation.
[    0.002731] smp: Bringing up secondary CPUs ...
[    0.002747] smp: Brought up 1 node, 1 CPU
[    0.002757] SMP: Total of 1 processors activated (48.00 BogoMIPS).
[    0.002764] CPU: All CPU(s) started in SVC mode.
[    0.003528] devtmpfs: initialized
[    0.006657] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.006954] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.006981] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.007149] pinctrl core: initialized pinctrl subsystem
[    0.008018] random: get_random_u32 called from bucket_table_alloc+0xf0/0x250 with crng_init=0
[    0.008160] NET: Registered protocol family 16
[    0.008646] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.009779] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.009797] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.023302] SCSI subsystem initialized
[    0.023613] usbcore: registered new interface driver usbfs
[    0.023685] usbcore: registered new interface driver hub
[    0.023788] usbcore: registered new device driver usb
[    0.024038] pps_core: LinuxPPS API ver. 1 registered
[    0.024050] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.024074] PTP clock support registered
[    0.024302] Advanced Linux Sound Architecture Driver Initialized.
[    0.026192] clocksource: Switched to clocksource arch_sys_counter
[    0.036937] NET: Registered protocol family 2
[    0.037527] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.037561] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[    0.037584] TCP: Hash tables configured (established 1024 bind 1024)
[    0.037712] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.037760] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.037983] NET: Registered protocol family 1
[    0.038563] RPC: Registered named UNIX socket transport module.
[    0.038584] RPC: Registered udp transport module.
[    0.038590] RPC: Registered tcp transport module.
[    0.038596] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.040552] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[    0.049508] NFS: Registering the id_resolver key type
[    0.049561] Key type id_resolver registered
[    0.049568] Key type id_legacy registered
[    0.049617] jffs2: version 2.2. (NAND) ? 2001-2006 Red Hat, Inc.
[    0.051107] random: fast init done
[    0.053940] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.053965] io scheduler noop registered
[    0.053972] io scheduler deadline registered
[    0.054223] io scheduler cfq registered (default)
[    0.054237] io scheduler mq-deadline registered
[    0.054245] io scheduler kyber registered
[    0.058599] sun8i-v3s-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.127379] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.130632] console [ttyS0] disabled
[    0.150911] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 36, base_baud = 1500000) is a U6_16550A
[    0.741614] console [ttyS0] enabled
[    0.749825] m25p80 spi32766.0: unrecognized JEDEC id bytes: 00, 00, 00
[    0.756472] m25p80: probe of spi32766.0 failed with error -2
[    0.762672] libphy: Fixed MDIO Bus: probed
[    0.767429] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
[    0.773223] dwmac-sun8i 1c30000.ethernet: No regulator found
[    0.779007] dwmac-sun8i 1c30000.ethernet: Will use internal PHY
[    0.785001] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 38000)
[    0.794579] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
[    0.800274] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
[    0.807502] dwmac-sun8i 1c30000.ethernet: Normal descriptors
[    0.813155] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
[    0.820380] dwmac-sun8i 1c30000.ethernet: COE Type 2
[    0.825339] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
[    0.832313] libphy: stmmac: probed
[    0.837683] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.844221] ehci-platform: EHCI generic platform driver
[    0.849858] ehci-platform 1c1a000.usb: EHCI Host Controller
[    0.855474] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
[    0.863449] ehci-platform 1c1a000.usb: irq 26, io mem 0x01c1a000
[    0.896208] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[    0.903462] hub 1-0:1.0: USB hub found
[    0.907411] hub 1-0:1.0: 1 port detected
[    0.911909] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.918203] ohci-platform: OHCI generic platform driver
[    0.923779] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[    0.930511] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
[    0.938470] ohci-platform 1c1a400.usb: irq 27, io mem 0x01c1a400
[    1.011310] hub 2-0:1.0: USB hub found
[    1.015147] hub 2-0:1.0: 1 port detected
[    1.022757] udc-core: couldn't find an available UDC - added [g_cdc] to list of pending drivers
[    1.032347] input: 1c22800.lradc as /devices/platform/soc/1c22800.lradc/input/input0
[    1.041369] sun6i-rtc 1c20400.rtc: rtc core: registered rtc-sun6i as rtc0
[    1.048276] sun6i-rtc 1c20400.rtc: RTC enabled
[    1.052827] i2c /dev entries driver
[    1.057872] input: ns2009_ts as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-0048/input/input1
[    1.067370] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    1.136243] sunxi-mmc 1c0f000.mmc: base:0xc407b000 irq:23
[    1.181709] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.189887] mmc0: new SDHC card at address 0001
[    1.195020] mmcblk0: mmc0:0001 SD16G 14.8 GiB
[    1.199910] sunxi-mmc 1c10000.mmc: base:0xc423b000 irq:24
[    1.206361] usbcore: registered new interface driver usbhid
[    1.211937] usbhid: USB HID core driver
[    1.218401] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01c23000 not registered
[    1.226459] sun4i-codec 1c22c00.codec: Failed to register our card
[    1.232863]  mmcblk0: p1 p2
[    1.239084] NET: Registered protocol family 17
[    1.243647] Key type dns_resolver registered
[    1.248194] Registering SWP/SWPB emulation handler
[    1.259671] simple-framebuffer 43e89000.framebuffer: framebuffer at 0x43e89000, 0x177000 bytes, mapped to 0xc4400000
[    1.270353] simple-framebuffer 43e89000.framebuffer: format=x8r8g8b8, mode=800x480x32, linelength=3200
[    1.286648] Console: switching to colour frame buffer device 100x30
[    1.299046] simple-framebuffer 43e89000.framebuffer: fb0: simplefb registered!
[    1.307654] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator
[    1.319098] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    1.324864] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 3
[    1.334025] hub 3-0:1.0: USB hub found
[    1.338001] hub 3-0:1.0: 1 port detected
[    1.343149] using random self ethernet address
[    1.347724] using random host ethernet address
[    1.353263] usb0: HOST MAC 86:ea:3a:db:1c:dd
[    1.357728] usb0: MAC ba:23:53:3d:44:90
[    1.361628] g_cdc gadget: CDC Composite Gadget, version: King Kamehameha Day 2008
[    1.369152] g_cdc gadget: g_cdc ready
[    1.375511] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
[    1.385094] sun6i-rtc 1c20400.rtc: setting system clock to 1970-01-01 00:01:42 UTC (102)
[    1.393521] vcc5v0: disabling
[    1.396551] ALSA device list:
[    1.399517]   #0: V3s Audio Codec
[    1.404919] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    1.414445] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    1.524068] EXT4-fs (mmcblk0p2): recovery complete
[    1.534519] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.542732] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    1.551738] devtmpfs: mounted
[    1.555995] Freeing unused kernel memory: 1024K
[    1.743770] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
Starting logging: OK
Initializing random number generator... done.
Starting network: OK

Welcome to Buildroot
buildroot login: root
# cd /
# ls
bin         lib         lost+found  opt         run         tmp
dev         lib32       media       proc        sbin        usr
etc         linuxrc     mnt         root        sys         var

Thank you.

所有IO都引出,是个好办法，以后做板子都要引出IO

新内核都用设备树了，真怀念210开发板时代

我的KEIL环境还有些问题，有哪位大佬知道怎么配这板子的KEIL环境的吗

卡在 starting kernel 应是没有进入内核，和机器ID有关系

github.com我这边为什么打不开了

调试串口在板上的什么位置？

Where is the debugging serial port located on the board?

@tongshezheng
https://github.com/nminaylov/F1C100s_projects

这个很有参考价值，正在研究中

芯片成本只有十二三块，太好了

用KEIL来搞，把难度又降低了

看来咱们的贴子都受到国际同行的关注了

屏幕用的中RGB屏还是8080屏

真的是好东西，再问一下，如果要改大动，大概改哪里？谢谢。