页次： 1
命令保存如下
sh ./pack.sh
make: Nothing to be done for 'first'.
32+0 records in
32+0 records out
33554432 bytes (34 MB, 32 MiB) copied, 0.169975 s, 197 MB/s
815+1 records in
815+1 records out
417538 bytes (418 kB, 408 KiB) copied, 0.00204546 s, 204 MB/s
dd: failed to open 'output/images/env.bin': No such file or directory
0+1 records in
0+1 records out
11986 bytes (12 kB, 12 KiB) copied, 0.000954651 s, 12.6 MB/s
3+1 records in
3+1 records out
4298024 bytes (4.3 MB, 4.1 MiB) copied, 0.00529297 s, 812 MB/s
4+1 records in
4+1 records out
27197440 bytes (27 MB, 26 MiB) copied, 0.0763896 s, 356 MB/s
jffs2.bin
output/build/uboot-v3s-spi-experimental/u-boot-sunxi-with-spl.bin
tar: output/images/env.bin: Cannot stat: No such file or directory
output/images/sun8i-v3s-licheepi-zero-dock.dtb
output/images/zImage
tar: Exiting with failure status due to previous errors
flash_32m.bin你好，我按照荔枝派官方教材移植flash启动版本，修改了u-boot和内核，也修改了sun8i.h文件的启动参数和环境命令，设备树也添加了spi falsh节点，启动的时候卡在内核启动部分，能帮忙看下原因吗？
U-Boot 2017.01-rc2 (Sep 21 2024 - 13:55:52 +0800) Allwinner Technology
CPU: Allwinner V3s (SUN8I 1681)
Model: Lichee Pi Zero
DRAM: 64 MiB
MMC: SUNXI SD/MMC: 0
SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB
*** Warning - bad CRC, using default environment
Setting up a 800x480 lcd console (overscan 0x0)
dotclock: 33000kHz = 33000kHz: (1 * 3MHz * 66) / 6
In: serial@01c28000
Out: serial@01c28000
Err: serial@01c28000
Net: No ethernet found.
starting USB...
No controllers found
Hit any key to stop autoboot: 0
SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB
device 0 offset 0x100000, size 0x10000
SF: 65536 bytes @ 0x100000 Read: OK
device 0 offset 0x110000, size 0x400000
SF: 4194304 bytes @ 0x110000 Read: OK
## Flattened Device Tree blob at 41800000
Booting using the fdt blob at 0x41800000
Loading Device Tree to 42dfa000, end 42dfffc5 ... OK
Starting kernel ...页次： 1