您尚未登录。

#1 RK3288/RK3399/RK1108 » rv1106上电后一直进入recovery,能下载固件,但无法正常启动运行 » 2024-09-29 10:03:23

lsy512
回复: 0

rv1106上电后一直进入recovery,能下载固件,但无法正常启动运行,有大佬遇到过这种问题没,调试几天了一直没有头绪。

#2 全志 SOC » t113运行tina执行程序提示无hugepage » 2024-08-08 14:33:57

lsy512
回复: 0

t113运行tina执行程序提示无hugepage,在tina linux 内核中也没有发现有hugepage 启用的选项,请问有大佬知道怎么解决吗?

提示如下:
_20240808143239.png

#3 Re: 全志 SOC » V3S 的tina linux哪里可以找到啊 » 2023-02-06 19:56:25

histimes 说:

github上搜索一下?

没找到,我记得以前我还找到了的,现在搜素没得了

#5 全志 SOC » V3S 的tina linux哪里可以找到啊 » 2023-02-06 02:07:13

lsy512
回复: 5

V3S 的tina linux哪里可以找到啊,目前用的通常那种uboot+内核+buildroot,我们应用主要是网络相关应用,加载了无线网卡,添加了iptable nat后,会死机,了解到tina linux是基于openwrt开发,想试试tina linux是不是会好点。哪个大哥有资源可以分享下吗

#6 全志 SOC » V3S驱动rtl8732bs不稳定,作为AP 经常连不上 » 2022-08-11 17:15:24

lsy512
回复: 1

V3S驱动rtl8732bs不稳定,目前已经正常驱动,作为ap可以正常发wifi出来,启动后也可以正常连接,但不问题,出现问题如下:
1 hostapd启动起来后,手机和电脑一般杜可以正常连接到发出来的wifi,但很多时启动起来后如果长时间不连就无法正常连接到wifi。
2 无法正常连接wifi的情况主要是电脑无法正常连接,如果用手机去连,能连上的几率比电脑高,但同样也存在无法连接的情况。
有人遇到过这种情况吗,怎么解决呢

#8 Re: 全志 SOC » 通过 v3s openwrt 上网发个帖 » 2022-06-06 11:05:47

编译V3S版本的OPENWRT有没有参考资料怎么搞呢

#9 全志 SOC » V3S 接入wifi网卡,设置成monitor模式后skbuff: skb_over_panic error » 2022-06-06 10:51:12

lsy512
回复: 1

我在V3S上接入一张wifi网卡,并设置成monitor模式就会出现下面这个错误,有人遇到过吗?
经过我测试发现是在内核开启了NAT才会出现这个问题提,关闭后就解决了,但是我又必须要用到NAT。

_# [ 481.630319] skbuff: skb_over_panic: text:bf06ecbc len:65327 put:359 head:c3170008 data:c3170040 tail:0xc317ff6f end:0xc317ff40 dev:
[ 481.642699] ------------[ cut here ]------------
[ 481.647311] kernel BUG at net/core/skbuff.c:105!
[ 481.651921] Internal error: Oops - BUG: 0 [#1] SMP ARM
[ 481.657052] Modules linked in: 88XXau(O)
[ 481.660983] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.13.0-licheepi-zero+ #35
[ 481.669492] Hardware name: Allwinner sun8i Family
[ 481.674189] task: c0a09680 task.stack: c0a00000
[ 481.678726] PC is at skb_panic+0x60/0x64
[ 481.682646] LR is at skb_panic+0x60/0x64
[ 481.686563] pc : [] lr : [] psr: 600f0193
[ 481.692811] sp : c0a01e18 ip : 00000000 fp : 40000006
[ 481.698028] r10: c0a02080 r9 : c431d000 r8 : 0000ff2f
[ 481.703245] r7 : c07627b0 r6 : c3170008 r5 : c3170040 r4 : c317ff6f
[ 481.709763] r3 : c4000000 r2 : 00000001 r1 : 02000005 r0 : 0000007d
[ 481.716282] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none
[ 481.723493] Control: 10c5387d Table: 4311006a DAC: 00000051
[ 481.729230] Process swapper/0 (pid: 0, stack limit = 0xc0a00210)
[ 481.735228] Stack: (0xc0a01e18 to 0xc0a02000)
[ 481.739580] 1e00: 00000167 c3170008
[ 481.747748] 1e20: c3170040 c317ff6f c317ff40 c0823724 c317ff40 c053cec0 c431c000 c431d260
[ 481.755916] 1e40: c314a280 c3bdcc48 00000000 bf06ecbc c314a280 600f0113 00000000 c3b2a500
[ 481.764083] 1e60: c3b2a4fc c094a284 c0a02080 c0477dac c3b2a4f8 c0a01e80 00000000 c0477eac
[ 481.772251] 1e80: c0a01e80 c0a01e80 c3b2a508 c3b2a50c 00000000 c0a01ea0 c0a00000 c012327c
[ 481.780418] 1ea0: 00000000 00000006 c0a00000 c0a02098 c0a02080 00000100 c0a02080 c0123434
[ 481.788586] 1ec0: c3808000 c4003000 c0a01ec0 c0a424c0 0000000a 000046f3 c0a02d00 00200102
[ 481.796754] 1ee0: c3899060 c095160c 0000001a 00000000 00000000 c3808000 c4003000 c3e02d40
[ 481.804921] 1f00: 00000000 c0123884 c095160c c0164094 c0a16ce4 c0a04fb4 c400200c c0a01f48
[ 481.813089] 1f20: c4002000 c01014a4 c010808c 600f0013 ffffffff c0a01f7c c0a41a40 c0a00000
[ 481.821257] 1f40: c3e02d40 c010bdcc 00000000 00045620 0349c000 c01171c0 c0a00000 c0a04d48
[ 481.829424] 1f60: c0a04cec c0a3a622 c0a41a40 c0938a28 c3e02d40 00000000 0349c000 c0a01f98
[ 481.837592] 1f80: c0108088 c010808c 600f0013 ffffffff 00000051 00000000 c0a00000 c0155a68
[ 481.845759] 1fa0: 000000bb c0a41a40 c0a04cc0 ffffffff c0a41a40 c0155d48 c0a41a80 c0900c58
[ 481.853927] 1fc0: ffffffff ffffffff 00000000 c0900684 00000000 c0938a28 c0a41dd4 c0a04cd8
[ 481.862094] 1fe0: c0938a24 c0a0a8d0 4000406a 410fc075 00000000 4000807c 00000000 00000000
[ 481.870281] [] (skb_panic) from [] (skb_put+0x50/0x54)
[ 481.877706] [] (skb_put) from [] (usb_read_port_complete+0x9c/0x1d8 [88XXau])
[ 481.886896] [] (usb_read_port_complete [88XXau]) from [] (__usb_hcd_giveback_urb+0x80/0xe4)
[ 481.896987] [] (__usb_hcd_giveback_urb) from [] (usb_giveback_urb_bh+0x9c/0xec)
[ 481.906028] [] (usb_giveback_urb_bh) from [] (tasklet_action+0x74/0x110)
[ 481.914460] [] (tasklet_action) from [] (__do_softirq+0xc8/0x220)
[ 481.922282] [] (__do_softirq) from [] (irq_exit+0xd8/0x140)
[ 481.929588] [] (irq_exit) from [] (__handle_domain_irq+0x60/0xb4)
[ 481.937415] [] (__handle_domain_irq) from [] (gic_handle_irq+0x4c/0x90)
[ 481.945759] [] (gic_handle_irq) from [] (__irq_svc+0x6c/0x90)
[ 481.953230] Exception stack(0xc0a01f48 to 0xc0a01f90)
[ 481.958276] 1f40: 00000000 00045620 0349c000 c01171c0 c0a00000 c0a04d48
[ 481.966444] 1f60: c0a04cec c0a3a622 c0a41a40 c0938a28 c3e02d40 00000000 0349c000 c0a01f98
[ 481.974609] 1f80: c0108088 c010808c 600f0013 ffffffff
[ 481.979661] [] (__irq_svc) from [] (arch_cpu_idle+0x38/0x3c)
[ 481.987055] [] (arch_cpu_idle) from [] (do_idle+0xc0/0x138)
[ 481.994360] [] (do_idle) from [] (cpu_startup_entry+0x18/0x1c)
[ 482.001926] [] (cpu_startup_entry) from [] (start_kernel+0x374/0x380)
[ 482.010097] Code: e58d5008 e58d400c e58de010 ebf09d3c (e7f001f2)
[ 482.016186] ---[ end trace 0e11b3253337338a ]---
[ 482.020799] Kernel panic - not syncing: Fatal exception in interrupt
[ 482.027155] Rebooting in 5 seconds..
_

#11 全志 SOC » V3S 运行iptables命令提示can't initialize iptables table `nat' » 2022-05-31 19:47:46

lsy512
回复: 2

最近在用V3S主板,使用iptables命令是执行命令
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE

提示
iptables v1.6.1: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.

根据查询资料应该是内核中没有开启iptable_nat,但我进入内核编译发现始终没法使能IP_NF_NAT选项,这就导致无法编译出optables_nat.ko
FluxBB bbcode 测试

改怎么破呢,感谢

页脚

工信部备案:粤ICP备20025096号 Powered by FluxBB

感谢为中文互联网持续输出优质内容的各位老铁们。 QQ: 516333132, 微信(wechat): whycan_cn (哇酷网/挖坑网/填坑网) service@whycan.cn