主芯片v3s，使用32M spi flash，启动卡在Starting kernel ...；用tf卡启动也是一样，但是我的文件都是没问题的，之前在板子上跑过，换了这个板子就卡住了，下面三打印信息
U-Boot SPL 2017.01-rc2-00073-gdd6e8740dc-dirty (Jun 18 2020 - 17:29:34)
DRAM: 64 MiB
Trying to boot from sunxi SPI
U-Boot 2017.01-rc2-00073-gdd6e8740dc-dirty (Jun 18 2020 - 17:29:34 +0800) Allwinner Technology
CPU: Allwinner V3s (SUN8I 1681)
Model: Lichee Pi Zero
DRAM: 64 MiB
MMC: SUNXI SD/MMC: 0
SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB
*** Warning - bad CRC, using default environment
In: serial@01c28000
Out: serial@01c28000
Err: serial@01c28000
U-Boot 2017.01-rc2-00073-gdd6e8740dc-dirty (Jun 18 2020 - 17:29:34 +0800) Allwinner Technology
CPU: Allwinner V3s (SUN8I 1681)
Model: Lichee Pi Zero
DRAM: 64 MiB
MMC: SUNXI SD/MMC: 0
SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB
*** Warning - bad CRC, using default environment
In: serial@01c28000
Out: serial@01c28000
Err: serial@01c28000
Net: No ethernet found.
starting USB...
No controllers found
Hit any key to stop autoboot: 0
SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB
device 0 offset 0x100000, size 0x10000
SF: 65536 bytes @ 0x100000 Read: OK
device 0 offset 0x110000, size 0x400000
SF: 4194304 bytes @ 0x110000 Read: OK
## Flattened Device Tree blob at 41800000
Booting using the fdt blob at 0x41800000
Loading Device Tree to 42dfa000, end 42dff5bb ... OK
Starting kernel ...离线
zImage或者dtb 有问题或者不完整， 用这个逐个替换: https://whycan.cn/t_3400.html#p47841
离线
不行，和我的固件差不多，下面是我下载的固件输出信息
U-Boot SPL 2017.01-rc2-00081-g2914134d38-dirty (Dec 17 2019 - 16:28:42)
DRAM: 64 MiB
Trying to boot from sunxi SPI
U-Boot 2017.01-rc2-00081-g2914134d38-dirty (Dec 17 2019 - 16:28:42 +0800) Allwiy
CPU: Allwinner V3s (SUN8I 1681)
Model: Lichee Pi Zero
DRAM: 64 MiB
MMC: SUNXI SD/MMC: 0
SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 B
*** Warning - bad CRC, using default environment
Setting up a 800x480 lcd console (overscan 0x0)
dotclock: 33000kHz = 33000kHz: (1 * 3MHz * 66) / 6
In: serial@01c28000
Out: serial@01c28000
Err: serial@01c28000
U-Boot 2017.01-rc2-00081-g2914134d38-dirty (Dec 17 2019 - 16:28:42 +0800) Allwiy
CPU: Allwinner V3s (SUN8I 1681)
Model: Lichee Pi Zero
DRAM: 64 MiB
MMC: SUNXI SD/MMC: 0
SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 B
*** Warning - bad CRC, using default environment
Setting up a 800x480 lcd console (overscan 0x0)
dotclock: 33000kHz = 33000kHz: (1 * 3MHz * 66) / 6
In: serial@01c28000
Out: serial@01c28000
Err: serial@01c28000
Hit any key to stop autoboot: 0
SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 B
device 0 offset 0x50000, size 0x50000
SF: 327680 bytes @ 0x50000 Read: OK
Uncompressed size: 385078 = 0x5E036
device 0 offset 0xf0000, size 0x4000
SF: 16384 bytes @ 0xf0000 Read: OK
device 0 offset 0x100000, size 0x400000
SF: 4194304 bytes @ 0x100000 Read: OK
## Flattened Device Tree blob at 41800000
Booting using the fdt blob at 0x41800000
Loading Device Tree to 42df9000, end 42dff040 ... OK
Starting kernel ...离线
我测试结果是跟程序没有关系，同样的固件在zero板子上可以运行，在我自己画的板子上就卡住，不知道问题出在那里，请问大师有没有遇到过
离线