WhyCan Forum(哇酷开发者社区)

* Dialog Semiconductor DA9062/61 Watchdog Timer

Required properties:

- compatible: should be one of the following valid compatible string lines:
        "dlg,da9061-watchdog", "dlg,da9062-watchdog"
        "dlg,da9062-watchdog"

Optional properties:
- dlg,use-sw-pm: Add this property to disable the watchdog during suspend.
        Only use this option if you can't use the watchdog automatic suspend
        function during a suspend (see register CONTROL_B).

Example: DA9062

        pmic0: da9062@58 {
                watchdog {
                        compatible = "dlg,da9062-watchdog";
                };
        };

Example: DA9061 using a fall-back compatible for the DA9062 watchdog driver

        pmic0: da9061@58 {
                watchdog {
                        compatible = "dlg,da9061-watchdog", "dlg,da9062-watchdog";
                };
        };

/* DA9062AA_CONTROL_F = 0x013 */
#define DA9062AA_WATCHDOG_SHIFT         0
#define DA9062AA_WATCHDOG_MASK          0x01
#define DA9062AA_SHUTDOWN_SHIFT         1
#define DA9062AA_SHUTDOWN_MASK          BIT(1)
#define DA9062AA_WAKE_UP_SHIFT          2
#define DA9062AA_WAKE_UP_MASK           BIT(2)

static int da9062_wdt_restart(struct watchdog_device *wdd, unsigned long action,
                              void *data)
{
        struct da9062_watchdog *wdt = watchdog_get_drvdata(wdd);
        struct i2c_client *client = to_i2c_client(wdt->hw->dev);
        int ret;

        /* Don't use regmap because it is not atomic safe */
        ret = i2c_smbus_write_byte_data(client, DA9062AA_CONTROL_F,
                                        DA9062AA_SHUTDOWN_MASK);
        if (ret < 0)
                dev_alert(wdt->hw->dev, "Failed to shutdown (err = %d)\n",
                          ret);

        /* wait for reset to assert... */
        mdelay(500);

        return ret;
}