您尚未登录。

楼主 # 2021-09-09 14:36:34

X3
会员
注册时间: 2020-04-08
已发帖子: 33
积分: 28

刚刚收到的全志AIC800开发板,接个串口打印LOG 试一试

全志AIC800 手册: aic800g3_datasheet_v1.4.pdf

原理图: SC3904Q-mb-V00-20112600.pdf


[94]HELLO! BOOT0 is starting!
[97]BOOT0 commit : dc54be6
[100]set pll start
[102]periph0 has been enabled
[105]set pll end
[107][pmu]: bus read error
[109][pmu]: bus read error
[117]vaild para:1  select dram para0
[121]board init ok
[123]DRAM BOOT DRIVE INFO: V0.19
[126]the chip id is 0x2400
[129]the chip id is 0x2400
[131]the chip id is 0x2400
[134]the chip id is 0x2400
[137]the chip id is 0x2400
[139]chip id check OK
[141]DRAM_VCC set to 1100 mv
[144]DRAM CLK =792 MHZ
[147]DRAM Type =8 (3:DDR3,4:DDR4,7:LPDDR3,8:LPDDR4)
[155]DRAM SIZE =1024 MBytes, para1 = 30fa, para2 = 4000000, dram_tpr13 = 6063
[167]DRAM simple test OK.
[170]dram size =1024
[172]chipid = 53002400
[174]nsi init ok 2020-4-7
[177]card no is 2
[179]sdcard 2 line count 8
[182][mmc]: mmc driver ver 2020-05-25 09:40
[191][mmc]: Wrong media type 0x0
[195][mmc]: ***Try SD card 2***
[198][mmc]: mmc 2 cmd 8 timeout, err 100
[202][mmc]: mmc 2 cmd 8 err 100
[206][mmc]: mmc 2 send if cond failed
[210][mmc]: mmc 2 cmd 55 timeout, err 100
[214][mmc]: mmc 2 cmd 55 err 100
[217][mmc]: mmc 2 send app cmd failed
[221][mmc]: ***Try MMC card 2***
[246][mmc]: RMCA OK!
[248][mmc]: mmc 2 bias 4
[251][mmc]: MMC 5.0
[253][mmc]: HSSDR52/SDR25 8 bit
[256][mmc]: 50000000 Hz
[259][mmc]: 7456 MB
[261][mmc]: ***SD/MMC 2 init OK!!!***
[315]Loading boot-pkg Succeed(index=0).
[319]Entry_name        = u-boot
[326]Entry_name        = monitor
[329]Entry_name        = scp
[337]set arisc reset to de-assert state
[341]Entry_name        = dtb
[345]tunning data addr:0x4a0003e8
[348]Jump to second Boot.
NOTICE:  BL3-1: v1.0(debug):cc1f5d7
NOTICE:  BL3-1: Built : 10:23:25, 2020-04-08
NOTICE:  BL3-1 commit: 8
ERROR:   Error initializing runtime service tspd_fast
NOTICE:  BL3-1: Preparing for EL3 exit to normal world
NOTICE:  BL3-1: Next image address = 0x4a000000
NOTICE:  BL3-1: Next image spsr = 0x1d3

U-Boot 2018.05-00002-g27dfc9348f (Nov 06 2020 - 08:19:02 +0000) Allwinner Technology

[00.428]CPU:   Allwinner Family
[00.431]Model: sun50iw10
I2C:   ready
[00.682]DRAM:  1 GiB
[00.685]Relocation Offset is: 35f17000
[00.714]secure enable bit: 0
[00.717][ARISC] :arisc initialize
[00.722][ARISC ERROR] :get [allwinner,sunxi-hwspinlock] device node error
CACHE: Misaligned operation at range [7ffa72c0, 7ffa75d8]
[00.733][ARISC] :arisc para ok
[SCP] :sunxi-arisc driver begin startup 2
[SCP] :0x1
[SCP] :arisc version: [9b9b85f5ab606cc93b4061ac38834cab8a191a28rid-]
[SCP] :arisc startup ready
[SCP] :arisc startup notify message feedback
[SCP] :send hard sync feedback message: 0x900200
[SCP] :sunxi-arisc driver v1.10 is starting
[00.763][ARISC] :sunxi-arisc driver startup succeeded
[00.769]pmu_axp81X_probe pmic_bus_read fail
[00.773]pmu_axp858_probe pmic_bus_read fail
[00.777]PMU: no found
[00.779]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=400Mhz
[00.786]init_clocks:finish
[00.788]not need merged sunxi overlay
[00.791]drv_disp_init
request pwm success, pwm8:pwm8:0x300a000.
pwm_request: err:this pwm has been requested!
[00.827]drv_disp_init finish
[00.835]gic: sec monitor mode
[00.838]flash init start
[00.840]workmode = 0,storage type = 2
[00.843][mmc]: mmc driver ver uboot2018:2020-5-25 9:26:00-20201021190
[00.857][mmc]: SUNXI SDMMC Controller Version:0x50300
[00.881][mmc]: Best spd md: 2-HSDDR52/DDR50, freq: 2-50000000, Bus width: 8
[00.888]sunxi flash init ok
[00.891]Loading Environment from SUNXI_FLASH... OK
[00.900]no secure os for keybox operation
[00.903]try to burn key
[00.907]out of usb burn from boot: not need burn key
[00.911]boot_gui_init:start
[00.915]set disp.dev2_output_type fail. using defval=0
[00.920]disp 1, clk: pll(490000000),clk(490000000),dclk(70000000) dsi_rate(490000000)
     clk real:pll(492000000),clk(492000000),dclk(70285714) dsi_rate(0)
[00.938]switch device: sel=1, type=1, mode=4, format=0, bits=0, eotf=4, cs=260
[00.944]boot_gui_init:finish
[00.947]bmp_name=bootlogo.bmp
2764856 bytes read in 32 ms (82.4 MiB/s)
[00.999]read item0 copy0
[01.001]Item0 (Map) magic is bad
[01.004]the secure storage item0 copy0 magic is bad
[01.009]Item0 (Map) magic is bad
[01.011]the secure storage item0 copy1 magic is bad
[01.016]Item0 (Ma[01.018]soc ic_ver:0x0, qa_val:0x0, markid:0x53002400 dclk[0-9999]
p) magic is bad
[01.025]the secure storage map is empty
[01.028]no item name device_unlock in the map
[01.032]no item name fastboot_status_flag in the map
[01.037]sunxi secure storage has no flag
[01.043][mmc]: delete mmc-hs400-1_8v from dtb
[01.047][mmc]: delete mmc-hs200-1_8v from dtb
[01.051][mmc]: get max-frequency ok 50000000 Hz
[01.057](weak)update dtb dram start
[01.061]update dtb dram  end
[01.063]update dts
[01.065]no item name snum in the map
** Unrecognized filesystem type **
[01.078]load file(ULI/factory/snum.txt) error.
[01.082]no item name mac in the map
** Unrecognized filesystem type **
[01.095]load file(ULI/factory/mac.txt) error.
[01.099]no item name wifi_mac in the map
** Unrecognized filesystem type **
[01.113]load file(ULI/factory/wifi_mac.txt) error.
[01.117]no item name bt_mac in the map
[01.126]LCD open finish
** Unrecognized filesystem type **
[01.135]load file(ULI/factory/bt_mac.txt) error.
[01.140]no item name specialstr in the map
** Unrecognized filesystem type **
[01.153]load file(ULI/factory/specialstr.txt) error.
[01.166]update part info
[01.169]key 0
[01.173]misc partition found
[01.196]update bootcmd
[01.197]serial num is: 0c001415a0c0873228d
Hit any key to stop autoboot:  0
[03.212]partinfo: name boot, start 0x2a000, size 0x10000
[03.504]read data in addr ret = 1
[03.507]magic = AVB0
[03.509]major version = 1  minor version = 0
[03.513]authentication_data_block_size = 240
[03.517]auxiliary_data_block_size = d40
[03.521]vbmeta_size = 4224
[03.523]algorithm_type = 0
[03.526]flag = 0
[03.527]release tool = avbtool 1.1.0
[03.544]read data in addr ret = 1
[03.547]magic = AVB0
[03.550]major version = 1  minor version = 0
[03.554]authentication_data_block_size = 140
[03.558]auxiliary_data_block_size = 3c0
[03.561]vbmeta_size = 1536
[03.564]algorithm_type = 0
[03.566]flag = 0
[03.568]release tool = avbtool 1.1.0
[03.585]read data in addr ret = 1
[03.588]magic = AVB0
[03.590]major version = 1  minor version = 0
[03.594]authentication_data_block_size = 140
[03.598]auxiliary_data_block_size = 340
[03.602]vbmeta_size = 1408
[03.605]algorithm_type = 0
[03.607]flag = 0
[03.609]release tool = avbtool 1.1.0
[03.612]total_size = 7168
[03.615]alloc block = 17
[03.658]vbmeta hash is 318f52cb3e903d5eacdc4fc4d4f9d9156a94d1d9142b53f3ed945c788a49ddf2[03.668]in boot normal mode,pass normal para to cmdline
[03.674]android.hardware = sun50iw10p1
[03.677]line:56 dtbo_idx= 0
[03.679]dtbo_idx= 64
[03.759]partinfo: name dtbo, start 0x8c2000, size 0x1000
[03.814]Starting kernel ...

[03.816][mmc]: mmc exit start
[03.835][mmc]: mmc 2 exit ok
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.9.170 (keliang.liu@Exdroid019) (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05) ) #11 SMP PREEMPT Thu Aug 5 15:18:26 CST 2021
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] disp reserve base 0x7bf65080 ,size 0x3e8000
[    0.000000] cma: Reserved 8 MiB at 0x000000007f800000
[    0.000000] On node 0 totalpages: 262144
[    0.000000]   DMA zone: 4096 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 262144 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 23 pages/cpu @ffffffc03f704000 s53376 r8192 d32640 u94208
[    0.000000] pcpu-alloc: s53376 r8192 d32640 u94208 alloc=23*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258048
[    0.000000] Kernel command line: earlyprintk=sunxi-uart,0x05000000 initcall_debug=0 console=ttyS0,115200 loglevel=8 root=/dev/mmcblk0p4 init=/init partitions=bootloader@mmcblk0p1:env@mmcblk0p2:boot@mmcblk0p3:super@mmcblk0p4:misc@mmcblk0p5:recovery@mmcblk0p6:cache@mmcblk0p7:vbmeta@mmcblk0p8:vbmeta_system@mmcblk0p9:vbmeta_vendor@mmcblk0p10:metadata@mmcblk0p11:private@mmcblk0p12:frp@mmcblk0p13:empty@mmcblk0p14:dtbo@mmcblk0p15:media_data@mmcblk0p16:UDISK@mmcblk0p17 cma=8M snum=0c001415a0c0873228d mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.vbmeta.avb_version=2.0 androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=7168 androidboot.vbmeta.digest=318f52cb3e903d5eacdc4fc4d4f9d9156a94d1d9142b53f3ed945c788a49ddf2 androidboot.vbmeta.device_state=locked androidboot.mode=normal androidboot.serialno=0c001415a0c0873228d androidboot.hardware=sun50iw10p1 boot_type=2 androidboot.boot_type=2 androidboot.secure_os_exist=0 androidboot.trustchain=false gpt=1 uboot_message=2018.05-00002-g[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Memory: 977432K/1048576K available (11390K kernel code, 2192K rwdata, 4040K rodata, 4416K init, 599K bss, 62952K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008ba0000   ( 11392 KB)
[    0.000000]     .rodata : 0xffffff8008ba0000 - 0xffffff8008fa0000   (  4096 KB)
[    0.000000]       .init : 0xffffff8008fa0000 - 0xffffff80093f0000   (  4416 KB)
[    0.000000]       .data : 0xffffff80093f0000 - 0xffffff8009614008   (  2193 KB)
[    0.000000]        .bss : 0xffffff8009614008 - 0xffffff80096a9f18   (   600 KB)
[    0.000000]     fixed   : 0xffffffbefe7fb000 - 0xffffffbefec00000   (  4116 KB)
[    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
[    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
[    0.000000]               0xffffffbf00000000 - 0xffffffbf01000000   (    16 MB actual)
[    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc040000000   (  1024 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.008151] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    0.018200] pid_max: default: 32768 minimum: 301
[    0.023030] Security Framework initialized
[    0.026879] SELinux:  Initializing.
[    0.030473] SELinux:  Starting in permissive mode
[    0.035135] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.041697] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.049571] ftrace: allocating 34487 entries in 135 pages
[    0.133140] sched-energy: CPU device node has no sched-energy-costs
[    0.133781] Invalid sched_group_energy for CPU0
[    0.138319] CPU0: update cpu_capacity 1024
[    0.152424] ASID allocator initialised with 32768 entries
[    0.171319] BOOTEVENT:       171.309206: ON
[    0.199393] Detected VIPT I-cache on CPU1
[    0.199444] Invalid sched_group_energy for CPU1
[    0.199447] CPU1: update cpu_capacity 1024
[    0.199449] CPU1: Booted secondary processor [410fd034]
[    0.222760] Detected VIPT I-cache on CPU2
[    0.222788] Invalid sched_group_energy for CPU2
[    0.222790] CPU2: update cpu_capacity 1024
[    0.222793] CPU2: Booted secondary processor [410fd034]
[    0.246173] Detected VIPT I-cache on CPU3
[    0.246199] Invalid sched_group_energy for CPU3
[    0.246202] CPU3: update cpu_capacity 1024
[    0.246205] CPU3: Booted secondary processor [410fd034]
[    0.246287] Brought up 4 CPUs
[    0.296922] SMP: Total of 4 processors activated.
[    0.301614] CPU features: detected feature: 32-bit EL0 Support
[    0.307419] CPU features: detected feature: Kernel page table isolation (KPTI)
[    0.318435] CPU: All CPU(s) started at EL1
[    0.318690] alternatives: patching kernel code
[    0.323300] Invalid sched_group_energy for CPU3
[    0.327617] CPU3: update max cpu_capacity 1024
[    0.332032] Invalid sched_group_energy for Cluster3
[    0.336885] Invalid sched_group_energy for CPU2
[    0.341392] Invalid sched_group_energy for Cluster2
[    0.346245] Invalid sched_group_energy for CPU1
[    0.350752] Invalid sched_group_energy for Cluster1
[    0.355604] Invalid sched_group_energy for CPU0
[    0.360112] Invalid sched_group_energy for Cluster0
[    0.365495] CPU1: update max cpu_capacity 1024
[    0.370110] devtmpfs: initialized
[    0.411511] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.415650] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    0.422448] atomic64_test: passed
[    0.425146] pinctrl core: initialized pinctrl subsystem
[    0.432406] NET: Registered protocol family 16
[    0.436190] dump_class_init,861, success
[    0.452075] cpuidle: using governor menu
[    0.453372] sunxi iommu: irq = 9
[    0.454362] vdso: 2 pages (1 code @ ffffff8008ba8000, 1 data @ ffffff80093f4000)
[    0.460988] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.469145] DMA: preallocated 256 KiB pool for atomic allocations
[    0.476973] sun50iw10p1-r-pinctrl r_pio: initialized sunXi PIO driver
[    0.497370] sun50iw10p1-pinctrl pio: initialized sunXi PIO driver
[    0.501908] iommu: Adding device 1c0e000.ve to group 0
[    0.510198] iommu: Adding device 6000000.disp to group 0
[    0.511091] iommu: Adding device 6480000.g2d to group 0
[    0.519109] iommu: Adding device csi0 to group 0
[    0.520097] iommu: Adding device csi1 to group 0
[    0.525349] iommu: Adding device 2108000.tdm to group 0
[    0.529935] iommu: Adding device 2100000.isp to group 0
[    0.535121] iommu: Adding device 2102000.isp to group 0
[    0.540159] iommu: Adding device 2110000.scaler to group 0
[    0.545620] iommu: Adding device 2110400.scaler to group 0
[    0.551078] iommu: Adding device 2110800.scaler to group 0
[    0.556531] iommu: Adding device 2110c00.scaler to group 0
[    0.600000] pwm module init!
[    0.605054] sunxi-pm debug v3.10
[    0.606600] SCSI subsystem initialized
[    0.607380] usbcore: registered new interface driver usbfs
[    0.611981] usbcore: registered new interface driver hub
[    0.617263] usbcore: registered new device driver usb
[    0.622367] sunxi_i2c_adap_init()2541 - init
[    0.626975] sunxi_i2c_probe()2289 - [i2c0] twi_drv_used = 0
[    0.631963] sunxi_i2c_probe()2293 - [i2c0] twi_pkt_interval = 0
[    0.637870] twi0 supply twi not found, using dummy regulator
[    0.643572] twi_request_gpio()453 - [i2c0] init name: twi0
[    0.649674] sunxi_i2c_probe()2289 - [i2c1] twi_drv_used = 0
[    0.654499] sunxi_i2c_probe()2293 - [i2c1] twi_pkt_interval = 0
[    0.660412] twi1 supply twi not found, using dummy regulator
[    0.666094] twi_request_gpio()453 - [i2c1] init name: twi1
[    0.672328] sunxi_i2c_probe()2289 - [i2c2] twi_drv_used = 0
[    0.677036] sunxi_i2c_probe()2293 - [i2c2] twi_pkt_interval = 0
[    0.682934] twi2 supply twi not found, using dummy regulator
[    0.688625] twi_request_gpio()453 - [i2c2] init name: twi2
[    0.694613] sunxi_i2c_probe()2289 - [i2c3] twi_drv_used = 0
[    0.699564] sunxi_i2c_probe()2293 - [i2c3] twi_pkt_interval = 0
[    0.705465] twi3 supply twi not found, using dummy regulator
[    0.711175] twi_request_gpio()453 - [i2c3] init name: twi3
[    0.717130] media: Linux media interface: v0.10
[    0.721121] Linux video capture interface: v2.00
[    0.726697] ion_parse_dt_heap_common: id 0 type 0 name sys_user align 1000
[    0.732719] ion_parse_dt_heap_common: id 4 type 4 name cma align 1000
[    0.739095] ion_parse_dt_heap_common: id 6 type 6 name secure align 1000
[    0.745898] drm config service not available: FFFFFFFF
[    0.750966] Advanced Linux Sound Architecture Driver Initialized.
[    0.757480] Bluetooth: Core ver 2.22
[    0.760371] NET: Registered protocol family 31
[    0.764732] Bluetooth: HCI device and connection manager initialized
[    0.771072] Bluetooth: HCI socket layer initialized
[    0.775919] Bluetooth: L2CAP socket layer initialized
[    0.780989] Bluetooth: SCO socket layer initialized
[    0.786576] ncs8801s init:*************************
[    0.790806] script_ncs8801s_gpio_init: ncs8801s is not used
[    0.796860] clocksource: Switched to clocksource arch_sys_counter
[    0.878522] VFS: Disk quotas dquot_6.6.0
[    0.878663] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.886439] udc_init,0
[    0.887689] NET: Registered protocol family 2
[    0.907057] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.908533] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    0.915116] TCP: Hash tables configured (established 8192 bind 8192)
[    0.921381] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.927224] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.933870] NET: Registered protocol family 1
[    0.938155] Trying to unpack rootfs image as initramfs...
[    0.970882] Freeing initrd memory: 752K
[    0.972443] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.979415] audit: initializing netlink subsys (disabled)
[    0.982275] audit: type=2000 audit(0.809:1): initialized
[    0.988544] workingset: timestamp_bits=45 max_order=18 bucket_order=0
[    1.005716] Registering sdcardfs 0.1
[    1.006293] ntfs: driver 2.1.32 [Flags: R/W].
[    1.008505] fuse init (API version 7.26)
[    1.014127] SELinux:  Registering netfilter hooks
[    1.021080] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.023966] io scheduler noop registered
[    1.027907] io scheduler deadline registered
[    1.032358] io scheduler cfq registered (default)
[    1.038427] [DISP]disp_module_init
[    1.041335] [DISP] disp_init,line:2214:
[    1.043821] smooth display screen:1 type:1 mode:4
[    1.122701] [DISP] lcd_clk_config,line:dlk(70000000) dsi_rate(490000000)
[    1.122747]      clk real:pll(492000000),clk(492000000),dclk(70285714) dsi_rate(0)
[    1.124067] [DISP]disp_module_init finish
[    1.126052] uart uart0: get regulator failed
[    1.126066] uart0 supply uart not found, using dummy regulator
[    1.126317] uart0: ttyS0 at MMIO 0x5000000 (irq = 349, base_baud = 1500000) is a SUNXI
[    1.126334] sw_console_setup()1731 - console setup baud 115200 parity n bits 8, flow n
[    1.161164] console [ttyS0] enabled
[    1.161164] console [ttyS0] enabled
[    1.170776] bootconsole [earlycon0] disabled
[    1.170776] bootconsole [earlycon0] disabled
[    1.179882] uart uart1: get regulator failed
[    1.188005] uart1 supply uart not found, using dummy regulator
[    1.194841] uart1: ttyS1 at MMIO 0x5000400 (irq = 350, base_baud = 1500000) is a SUNXI
[    1.204772] misc dump reg init
[    1.209335] G2D: Module initialized.major:246
[    1.215517] [drm] Initialized
[    1.219052] Unable to detect cache hierarchy for CPU 0
[    1.238438] brd: module loaded
[    1.257606] loop: module loaded
[    1.262054] zram: Added device: zram0
[    1.266389] [NAND][NE] Not found valid nand node on dts
[    1.273345] sunxi-wlan soc@03000000:wlan@0: wlan_busnum (1)
[    1.279645] sunxi-wlan soc@03000000:wlan@0: Missing wlan_power.
[    1.286343] sunxi-wlan soc@03000000:wlan@0: wlan_power_name ((null))
[    1.293553] sunxi-wlan soc@03000000:wlan@0: Missing wlan_io_regulator.
[    1.300911] sunxi-wlan soc@03000000:wlan@0: io_regulator_name ((null))
[    1.308323] sunxi-wlan soc@03000000:wlan@0: wlan_regon gpio=357  mul-sel=1  pull=-1  drv_level=-1  data=0
[    1.319127] sunxi-wlan soc@03000000:wlan@0: get gpio chip_en failed
[    1.326204] sunxi-wlan soc@03000000:wlan@0: get gpio power_en failed
[    1.333381] sunxi-wlan soc@03000000:wlan@0: wlan_hostwake gpio=358  mul-sel=1  pull=-1  drv_level=-1  data=0
[    1.344538] sunxi-wlan soc@03000000:wlan@0: clk not config
[    1.350724] sunxi-wlan soc@03000000:wlan@0: dcxo not config
[    1.357037] sunxi-wlan soc@03000000:wlan@0: pinctrl_lookup_state(default) failed! return ffffffffffffffed
[    1.368876] [ADDR_MGT] addr_mgt_probe: success.
[    1.376050] it6612_init-<629>:it6612 init:*************************
[    1.383867] it6612_probe-<497>:it6612 probe:*************************
[    1.395476] twi_stop()514 - [i2c0] STOP can't sendout!
[    1.401252] sunxi_i2c_core_process()1751 - [i2c0] STOP failed!
[    1.407837] sunxi_i2c_do_xfer()1946 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4c)
[    1.417448] sunxi_i2c_do_xfer()1946 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4c)
[    1.427095] sunxi_i2c_do_xfer()1946 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x4c)
[    1.436730] sunxi_i2c_do_xfer()1946 - [i2c3] incomplete xfer (status: 0x20, dev addr: 0x4c)
[    1.446839] libphy: Fixed MDIO Bus: probed
[    1.451464] tun: Universal TUN/TAP device driver, 1.6
[    1.457171] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.465922] gmac-power0: NULL
[    1.469303] gmac-power1: NULL
[    1.472652] gmac-power2: NULL
[    1.476934] PPP generic driver version 2.4.2
[    1.482023] PPP BSD Compression module registered
[    1.487343] PPP Deflate Compression module registered
[    1.493051] PPP MPPE Compression module registered
[    1.498453] NET: Registered protocol family 24
[    1.503470] PPTP driver version 0.8.5
[    1.507972] usbcore: registered new interface driver rtl8150
[    1.514429] usbcore: registered new interface driver r8152
[    1.520688] usbcore: registered new interface driver asix
[    1.526836] usbcore: registered new interface driver ax88179_178a
[    1.533758] usbcore: registered new interface driver cdc_ether
[    1.540418] usbcore: registered new interface driver smsc75xx
[    1.546965] usbcore: registered new interface driver smsc95xx
[    1.553506] usbcore: registered new interface driver net1080
[    1.559938] usbcore: registered new interface driver cdc_subset
[    1.566674] usbcore: registered new interface driver zaurus
[    1.573017] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    1.581430] usbcore: registered new interface driver cdc_ncm
[    1.587814] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.595525] get ehci0-controller, regulator_io is no nocare
[    1.601813] get ehci0-controller wakeup-source is fail.
[    1.607936] sunxi ehci0-controller don't init wakeup source
[    1.614220] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffff8009695988, 0x:ffffff80097bc000, irq_no:164
[    1.627936] [sunxi-ehci0]: Not init ehci0
[    1.632585] get ehci1-controller, regulator_io is no nocare
[    1.639064] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffff8009695d10, 0x:ffffff80097d7000, irq_no:166
[    1.652795] 5200000.ehci1-controller supply drvvbus not found, using dummy regulator
[    1.661648] sunxi-ehci 5200000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.671866] sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 1
[    1.682114] sunxi-ehci 5200000.ehci1-controller: irq 358, io mem 0xffffffc03dab0810
[    1.703547] sunxi-ehci 5200000.ehci1-controller: USB 0.0 started, EHCI 1.00
[    1.712466] hub 1-0:1.0: USB hub found
[    1.716739] hub 1-0:1.0: 1 port detected
[    1.722051] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.729362] get ohci0-controller, regulator_io is no nocare
[    1.735660] get ohci0-controller wakeup-source is fail.
[    1.741759] sunxi ohci0-controller don't init wakeup source
[    1.748166] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff8009696420
[    1.758647] [sunxi-ohci0]: Not init ohci0
[    1.763278] get ohci1-controller, regulator_io is no nocare
[    1.769843] [sunxi-ohci1]: probe, pdev->name: 5200000.ohci1-controller, sunxi_ohci: 0xffffff80096967a8
[    1.780347] 5200000.ohci1-controller supply drvvbus not found, using dummy regulator
[    1.789192] sunxi-ohci 5200000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    1.799017] sunxi-ohci 5200000.ohci1-controller: new USB bus registered, assigned bus number 2
[    1.808791] sunxi-ohci 5200000.ohci1-controller: irq 359, io mem 0xffffffc03dab0c00
[    1.878552] hub 2-0:1.0: USB hub found
[    1.882821] hub 2-0:1.0: 1 port detected
[    1.888348] usbcore: registered new interface driver uas
[    1.894462] usbcore: registered new interface driver usb-storage
[    1.901298] usbcore: registered new interface driver ums-alauda
[    1.908023] usbcore: registered new interface driver ums-cypress
[    1.914849] usbcore: registered new interface driver ums-datafab
[    1.921669] usbcore: registered new interface driver ums_eneub6250
[    1.928688] usbcore: registered new interface driver ums-freecom
[    1.935508] usbcore: registered new interface driver ums-isd200
[    1.942234] usbcore: registered new interface driver ums-jumpshot
[    1.949152] usbcore: registered new interface driver ums-karma
[    1.955784] usbcore: registered new interface driver ums-onetouch
[    1.962721] usbcore: registered new interface driver ums-realtek
[    1.969549] usbcore: registered new interface driver ums-sddr09
[    1.976272] usbcore: registered new interface driver ums-sddr55
[    1.982999] usbcore: registered new interface driver ums-usbat
[    1.989701] usbcore: registered new interface driver usbserial
[    1.996477] usbcore: registered new interface driver option
[    2.002809] usbserial: USB Serial support registered for GSM modem (1-port)
[    2.010917] usb_serial_number:20080411
[    2.015900] sunxikbd_key_init: key0 vol= 210 code= 115
[    2.021704] sunxikbd_key_init: key1 vol= 410 code= 114
[    2.027496] sunxikbd_key_init: key2 vol= 590 code= 139
[    2.033292] sunxikbd_key_init: key3 vol= 750 code= 28
[    2.038985] sunxikbd_key_init: key4 vol= 880 code= 102
[    2.045114] input: sunxi-keyboard as /devices/virtual/input/input0
[    2.054173] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0
[    2.061111] sunxi-rtc rtc: RTC enabled
[    2.065641] i2c /dev entries driver
[    2.070579] sunxi cedar version 0.1
[    2.074654] VE: install start!!!
[    2.074654]
[    2.080088] cedar_ve: cedar-ve the get irq is 347
[    2.085789] VE: get debugfs_mpp_root is NULL, please check mpp
[    2.085789]
[    2.094033] VE: sunxi ve debug register driver failed!
[    2.094033]
[    2.103701] device-mapper: uevent: version 1.0.3
[    2.109414] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    2.119096] device-mapper: verity-avb: AVB error handler initialized with vbmeta device:
[    2.128320] Bluetooth: HCI UART driver ver 2.3
[    2.133336] Bluetooth: HCI UART protocol H4 registered
[    2.139125] Bluetooth: HCI UART protocol LL registered
[    2.144919] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    2.156174] sunxi-mmc sdc2: SD/MMC/SDIO Host Controller Driver(v3.46 2020-6-1 11:33-202006021635)
[    2.166314] sunxi-mmc sdc2: No vmmc regulator found
[    2.171822] sunxi-mmc sdc2: No vqmmc regulator found
[    2.177418] sunxi-mmc sdc2: No vdmmc regulator found
[    2.183017] sunxi-mmc sdc2: No vd33sw regulator found
[    2.188708] sunxi-mmc sdc2: No vd18sw regulator found
[    2.194403] sunxi-mmc sdc2: No vq33sw regulator found
[    2.200094] sunxi-mmc sdc2: No vq18sw regulator found
[    2.206387] sunxi-mmc sdc2: set host busy
[    2.210991] mmc:failed to get gpios
[    2.215201] sunxi-mmc sdc2: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.240217] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.266897] sunxi-mmc sdc2: detmode:alway in(non removable)
[    2.266920] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.275286] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.276353] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.287208] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.287276] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.300121] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.344626] sun50iw10p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag0
[    2.354060] sun50iw10p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag0
[    2.363474] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.374356] sun50iw10p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0
[    2.383796] sun50iw10p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag0
[    2.393207] sun50iw10p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0
[    2.402643] sun50iw10p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag0
[    2.412374] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.46 2020-6-1 11:33-202006021635)
[    2.422465] sunxi-mmc sdc0: ***ctl-spec-caps*** 8
[    2.427776] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing MMC-HS(SDR20) dt B
[    2.438629] sunxi-mmc sdc2: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing MMC-HS(SDR20) dt B
[    2.449890] sunxi-mmc sdc2: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 8 timing MMC-HS(SDR20) dt B
[    2.460871] sunxi-mmc sdc0: No vmmc regulator found
[    2.460875] sunxi-mmc sdc0: No vqmmc regulator found
[    2.460880] sunxi-mmc sdc0: No vdmmc regulator found
[    2.460884] sunxi-mmc sdc0: No vd33sw regulator found
[    2.460888] sunxi-mmc sdc0: No vd18sw regulator found
[    2.460892] sunxi-mmc sdc0: No vq33sw regulator found
[    2.460896] sunxi-mmc sdc0: No vq18sw regulator found
[    2.466681] sunxi-mmc sdc0: set host busy
[    2.466745] sunxi-mmc sdc0: Got CD GPIO
[    2.467140] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.467167] sunxi-mmc sdc0: no vqmmc,Check if there is regulator
[    2.483616] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.500583] sunxi-mmc sdc0: detmode:gpio irq
[    2.500610] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[    2.502210] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.46 2020-6-1 11:33-202006021635)
[    2.502287] sunxi-mmc sdc1: ***ctl-spec-caps*** 8
[    2.502341] sunxi-mmc sdc1: No vmmc regulator found
[    2.502346] sunxi-mmc sdc1: No vqmmc regulator found
[    2.502350] sunxi-mmc sdc1: No vdmmc regulator found
[    2.502354] sunxi-mmc sdc1: No vd33sw regulator found
[    2.502358] sunxi-mmc sdc1: No vd18sw regulator found
[    2.502362] sunxi-mmc sdc1: No vq33sw regulator found
[    2.502366] sunxi-mmc sdc1: No vq18sw regulator found
[    2.502869] sunxi-mmc sdc1: set host busy
[    2.502944] mmc:failed to get gpios
[    2.502969] sunxi-mmc sdc1: min-frequency:400000
[    2.503199] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.503223] sunxi-mmc sdc1: no vqmmc,Check if there is regulator
[    2.517000] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.533617] sunxi-mmc sdc1: detmode:manually by software
[    2.534454] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !!
[    2.534965] hidraw: raw HID events driver (C) Jiri Kosina
[    2.535286] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !!
[    2.535312] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.537808] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.539712] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[    2.540540] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[    2.541368] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[    2.542193] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[    2.542231] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[    2.543879] usbcore: registered new interface driver usbhid
[    2.543881] usbhid: USB HID core driver
[    2.544434] ashmem: initialized
[    2.546264] optee: probing for conduit method from DT.
[    2.546271] optee: api uid mismatch
[    2.546694] usbcore: registered new interface driver snd-usb-audio
[    2.548450] u32 classifier
[    2.548453]     Actions configured
[    2.548464] Netfilter messages via NETLINK v0.30.
[    2.548481] nfnl_acct: registering with nfnetlink.
[    2.548796] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[    2.549034] ctnetlink v0.93: registering with nfnetlink.
[    2.549626] xt_time: kernel timezone is -0000
[    2.549730] ipip: IPv4 and MPLS over IPv4 tunneling driver
[    2.550499] gre: GRE over IPv4 demultiplexor driver
[    2.550503] ip_gre: GRE over IPv4 tunneling driver
[    2.551719] IPv4 over IPsec tunneling driver
[    2.567675] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.567939] arp_tables: arp_tables: (C) 2002 David S. Miller
[    2.573110] Initializing XFRM netlink socket
[    2.573144] IPsec XFRM device driver
[    2.574268] NET: Registered protocol family 10
[    2.576111] mip6: Mobile IPv6
[    2.576145] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    2.585456] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.586908] NET: Registered protocol family 17
[    2.586941] NET: Registered protocol family 15
[    2.586975] l2tp_core: L2TP core driver, V2.0
[    2.586989] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    2.589982] Registered cp15_barrier emulation handler
[    2.590001] Registered setend emulation handler
[    2.590946] registered taskstats version 1
[    2.605774] get usb_detect_mode is fail, 22
[    2.607059] sunxi-rtc rtc: setting system clock to 1970-01-01 00:00:05 UTC (5)
[    2.608114] usb1-vbus: disabling
[    2.608119] ALSA device list:
[    2.608122]   No soundcards found.
[    2.917934] sunxi-mmc sdc2: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 8 timing MMC-DDR52 dt B
[    2.920431] Freeing unused kernel memory: 4416K
[    2.920525] Kernel init done
[    2.928995] init: init first stage started!
[    2.930355] init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt
[    2.932911] init: Using Android DT directory /proc/device-tree/firmware/android/
[    2.958459] mmc0: new DDR MMC card at address 0001
[    2.968423] mmcblk0: mmc0:0001 8WPD3R 7.28 GiB
[    2.977357] mmcblk0boot0: mmc0:0001 8WPD3R partition 1 4.00 MiB
[    2.987815] mmcblk0boot1: mmc0:0001 8WPD3R partition 2 4.00 MiB
[    2.998267] mmcblk0rpmb: mmc0:0001 8WPD3R partition 3 512 KiB
[    3.007053]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
[    3.033971] init: [libfs_mgr]Created logical partition system on device /dev/block/dm-0
[    3.045005] init: [libfs_mgr]Created logical partition vendor on device /dev/block/dm-1
[    3.055862] init: [libfs_mgr]Created logical partition product on device /dev/block/dm-2
[    3.065980] init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/by-name/metadata
[    3.075358] init: [libfs_mgr]Filesystem on /dev/block/by-name/metadata was not cleanly shutdown; state flags: 0x1, incompat feature flags: 0x46
[    3.090468] init: [libfs_mgr]check_fs(): mount(/dev/block/by-name/metadata,/metadata,ext4)=-1: No such file or directory
[    3.102913] init: [libfs_mgr]Not running /system/bin/e2fsck on /dev/block/mmcblk0p11 (executable not in system image)
[    3.121076] EXT4-fs (mmcblk0p11): recovery complete
[    3.127172] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: errors=panic
[    3.144387] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1
[    3.163297] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1
[    3.175873] EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1
[    3.203165] init: 12 output lines suppressed due to ratelimiting
[    3.218400] random: init: uninitialized urandom read (40 bytes read)
[    3.370630] random: init: uninitialized urandom read (40 bytes read)
[    3.395100] init: Loading SELinux policy
[    3.420120] SELinux: 8192 avtab hash slots, 22205 rules.
[    3.443382] SELinux: 8192 avtab hash slots, 22205 rules.
[    3.449411] SELinux:  1 users, 4 roles, 1369 types, 0 bools, 1 sens, 1024 cats
[    3.457596] SELinux:  97 classes, 22205 rules
[    3.467126] SELinux:  Completing initialization.
[    3.472360] SELinux:  Setting up existing superblocks.
[    3.611267] audit: type=1403 audit(6.503:2): policy loaded auid=4294967295 ses=4294967295
[    3.620814] selinux: SELinux: Loaded policy from /vendor/etc/selinux/precompiled_sepolicy
[    3.620814]
[    3.640703] selinux: SELinux:  Skipping /product/etc/selinux/product_file_contexts:  empty file
[    3.640703]
[    3.652508] selinux: SELinux: Loaded file_contexts
[    3.652508]
[    3.667333] random: init: uninitialized urandom read (40 bytes read)
[    3.733358] init: init second stage started!
[    3.787961] init: Using Android DT directory /proc/device-tree/firmware/android/
[    3.805203] selinux: SELinux:  Skipping /product/etc/selinux/product_file_contexts:  empty file
[    3.805203]
[    3.817106] selinux: SELinux: Loaded file_contexts
[    3.817106]
[    3.824233] init: Running restorecon...
[    3.850150] init: Overriding previous 'ro.' property 'pm.dexopt.shared':'speed' with new value 'quicken'
[    3.864801] selinux: avc:  denied  { set } for  scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=1
[    3.864801]
[    3.882627] selinux: avc:  denied  { set } for  scontext=u:r:vendor_init:s0 tcontext=u:object_r:dalvik_prop:s0 tclass=property_service permissive=1
[    3.882627]
[    3.899392] init: Overriding previous 'ro.' property 'pm.dexopt.boot':'verify' with new value 'extract'
[    3.910084] init: Overriding previous 'ro.' property 'dalvik.vm.heapsize':'256m' with new value '512m'
[    4.138138] ueventd: ueventd started!
[    4.148831] selinux: SELinux:  Skipping /product/etc/selinux/product_file_contexts:  empty file
[    4.148831]
[    4.160705] selinux: SELinux: Loaded file_contexts
[    4.160705]
[    4.162085] apexd: Bootstrap subcommand detected
[    4.171959] apexd: Scanning /system/apex for embedded keys
[    4.174140] apexd: Scanning /product/apex for embedded keys
[    4.174358] apexd: ... does not exist. Skipping
[    4.174571] apexd: Scanning /system/apex looking for APEX packages.
[    4.174939] apexd: Found /system/apex/com.android.media
[    4.175407] apexd: Skipped when bootstrapping
[    4.175620] apexd: Found /system/apex/com.android.resolv
[    4.176075] apexd: Skipped when bootstrapping
[    4.176288] apexd: Found /system/apex/com.android.runtime.release
[    4.183055] apexd: 9 output lines suppressed due to ratelimiting
[    4.233369] ueventd: Parsing file /ueventd.rc...
[    4.240231] ueventd: Parsing file /vendor/ueventd.rc...
[    4.247299] ueventd: Parsing file /odm/ueventd.rc...
[    4.252990] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
[    4.264050] ueventd: Parsing file /ueventd.sun50iw10p1.rc...
[    4.270511] ueventd: Unable to read config file '/ueventd.sun50iw10p1.rc': open() failed: No such file or directory
[    4.552809] ueventd: Coldboot took 0.268 seconds
[    4.595741] Registered swp emulation handler
[    4.674570] init: wait for '/dev/block/by-name/media_data' took 0ms
[    4.691638] FAT-fs (mmcblk0p16): bogus number of reserved sectors
[    4.698657] FAT-fs (mmcblk0p16): Can't find a valid FAT filesystem
[    4.707430] random: fast init done
[    4.749983] logd.auditd: start
[    4.779235] fsck.f2fs: Info: Fix the reported corruption.
[    4.779235]
[    4.787216] fsck.f2fs:       Info: No support kernel version!
[    4.787216]
[    4.795082] fsck.f2fs: Info: Segments per section = 1
[    4.795082]
[    4.802565] fsck.f2fs: Info: Sections per zone = 1
[    4.802565]
[    4.809892] fsck.f2fs: Info: sector size = 512
[    4.809892]
[    4.816651] fsck.f2fs: Info: total sectors = 6049759 (2953 MB)
[    4.816651]
[    4.824925] fsck.f2fs: Info: MKFS version
[    4.824925]
[    4.831180] fsck.f2fs:   "4.9.170 #11 SMP PREEMPT Thu Aug 5 15:18:26 CST 2021"
[    4.831180]
[    4.841122] fsck.f2fs: Info: FSCK version
[    4.841122]
[    4.847446] fsck.f2fs:   from "4.9.170 #11 SMP PREEMPT Thu Aug 5 15:18:26 CST 2021"
[    4.847446]
[    4.980878] F2FS-fs (mmcblk0p17): recover_inode: ino = 1b39, name = 46.proto, inline = b
[    4.990535] F2FS-fs (mmcblk0p17): recover_dentry: ino = 1b39, name = 46.proto, dir = cdb, err = 0
[    5.000564] F2FS-fs (mmcblk0p17): recover_data: ino = 1b39 (i_size: recover) recovered = 0, err = 0
[    5.010763] F2FS-fs (mmcblk0p17): recover_inode: ino = 1b3b, name = drop37.tmp, inline = b
[    5.022535] F2FS-fs (mmcblk0p17): recover_dentry: ino = 1b3b, name = drop37.tmp, dir = 58, err = 0
[    5.032665] F2FS-fs (mmcblk0p17): recover_data: ino = 1b3b (i_size: recover) recovered = 0, err = 0
[    5.042865] F2FS-fs (mmcblk0p17): recover_inode: ino = 1b3c, name = log-files.xml, inline = 1
[    5.053354] F2FS-fs (mmcblk0p17): recover_dentry: ino = 1b3c, name = log-files.xml, dir = 57, err = 0
[    5.063813] F2FS-fs (mmcblk0p17): recover_data: ino = 1b3c (i_size: recover) recovered = 1, err = 0
[    5.074018] F2FS-fs (mmcblk0p17): recover_inode: ino = 1b3e, name = drop37.tmp, inline = b
[    5.083380] F2FS-fs (mmcblk0p17): recover_dentry: ino = 1b3e, name = drop37.tmp, dir = 58, err = 0
[    5.093559] F2FS-fs (mmcblk0p17): recover_data: ino = 1b3e (i_size: recover) recovered = 0, err = 0
[    5.103763] F2FS-fs (mmcblk0p17): recover_inode: ino = 1b3f, name = log-files.xml, inline = 1
[    5.113389] F2FS-fs (mmcblk0p17): recover_dentry: ino = 1b3f, name = log-files.xml, dir = 57, err = 0
[    5.123828] F2FS-fs (mmcblk0p17): recover_data: ino = 1b3f (i_size: recover) recovered = 1, err = 0
[    5.134030] F2FS-fs (mmcblk0p17): recover_inode: ino = 1b40, name = 46_task.xml, inline = b
[    5.144205] F2FS-fs (mmcblk0p17): recover_dentry: ino = 1b40, name = 46_task.xml, dir = 87d, err = 0
[    5.154535] F2FS-fs (mmcblk0p17): recover_data: ino = 1b40 (i_size: recover) recovered = 0, err = 0
[    5.164738] F2FS-fs (mmcblk0p17): recover_inode: ino = 1b44, name = drop37.tmp, inline = b
[    5.174086] F2FS-fs (mmcblk0p17): recover_dentry: ino = 1b44, name = drop37.tmp, dir = 58, err = 0
[    5.184204] F2FS-fs (mmcblk0p17): recover_data: ino = 1b44 (i_size: recover) recovered = 0, err = 0
[    5.194406] F2FS-fs (mmcblk0p17): recover_inode: ino = 1b45, name = log-files.xml, inline = 1
[    5.204036] F2FS-fs (mmcblk0p17): recover_dentry: ino = 1b45, name = log-files.xml, dir = 57, err = 0
[    5.214474] F2FS-fs (mmcblk0p17): recover_data: ino = 1b45 (i_size: recover) recovered = 1, err = 0
[    5.224706] F2FS-fs (mmcblk0p17): recover_inode: ino = 1b47, name = drop37.tmp, inline = b
[    5.234055] F2FS-fs (mmcblk0p17): recover_dentry: ino = 1b47, name = drop37.tmp, dir = 58, err = 0
[    5.244165] F2FS-fs (mmcblk0p17): recover_data: ino = 1b47 (i_size: recover) recovered = 0, err = 0
[    5.254367] F2FS-fs (mmcblk0p17): recover_inode: ino = 1b48, name = log-files.xml, inline = 1
[    5.263987] F2FS-fs (mmcblk0p17): recover_dentry: ino = 1b48, name = log-files.xml, dir = 57, err = 0
[    5.274418] F2FS-fs (mmcblk0p17): recover_data: ino = 1b48 (i_size: recover) recovered = 1, err = 0
[    5.284620] F2FS-fs (mmcblk0p17): recover_inode: ino = 1b4a, name = drop37.tmp, inline = b
[    5.293959] F2FS-fs (mmcblk0p17): recover_dentry: ino = 1b4a, name = drop37.tmp, dir = 58, err = 0
[    5.304074] F2FS-fs (mmcblk0p17): recover_data: ino = 1b4a (i_size: recover) recovered = 0, err = 0
[    5.314276] F2FS-fs (mmcblk0p17): recover_inode: ino = 1b4b, name = log-files.xml, inline = 1
[    5.323898] F2FS-fs (mmcblk0p17): recover_dentry: ino = 1b4b, name = log-files.xml, dir = 57, err = 0
[    5.334335] F2FS-fs (mmcblk0p17): recover_data: ino = 1b4b (i_size: recover) recovered = 1, err = 0
[    5.351490] F2FS-fs (mmcblk0p17): checkpoint: version = 6e8c2f39
[    5.358441] F2FS-fs (mmcblk0p17): Mounted with checkpoint version = 6e8c2f39
[    5.369023] EXT4-fs (mmcblk0p7): Ignoring removed nomblk_io_submit option
[    5.382881] EXT4-fs (mmcblk0p7): recovery complete
[    5.388774] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[    5.516141] EXT4-fs (mmcblk0p7): Ignoring removed nomblk_io_submit option
[    5.525855] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nomblk_io_submit,noauto_da_alloc,errors=panic
[    5.569367] init: 14 output lines suppressed due to ratelimiting
[    5.583708] zram0: detected capacity change from 0 to 760926208
[    5.627711] mkswap: Swapspace size: 743088k, UUID=b7c67a4f-02ba-4a2c-a078-0c665891b1c2
[    5.637636] Adding 743088k swap on /dev/block/zram0.  Priority:-1 extents:1 across:743088k SS
console:/ $ [    6.012945] usbcore: registered new interface driver uvcvideo
[    6.019484] USB Video Class driver (1.1.1)
[    6.251270] apexd: Marking APEXd as starting
[    6.257255] apexd: Scanning /system/apex for embedded keys
[    6.266316] apexd: Scanning /product/apex for embedded keys
[    6.272787] apexd: ... does not exist. Skipping
[    6.278024] apexd: Populating APEX database from mounts...
[    6.284849] apexd: Failed to walk /product/apex : Can't open /product/apex for reading : No such file or directory
[    6.297545] apexd: Found "/apex/com.android.runtime@1"
[    6.303622] apexd: Found "/apex/com.android.tzdata@290000000"
[    6.310561] apexd: 2 packages restored.
[    6.315174] apexd: Scanning /data/apex/sessions looking for sessions to be activated.
[    6.411385] vdc: Waited 0ms for vold
[    6.518051] type=1400 audit(9.410:3): avc: denied { setattr } for comm="init" name="audio_d" dev="mmcblk0p17" ino=118 scontext=u:r:vendor_init:s0 tcontext=u:object_r:audio_rw_data_file:s0 tclass=dir permissive=1
[    6.744413] logd.daemon: reinit
[    6.879128] treadahead: go to process_files
[    7.144183] file system registered
[    7.196410] using random self ethernet address
[    7.216963] using random host ethernet address
[    7.258698] healthd: No battery devices found
[    7.269546] healthd: battery none chg=
[    7.399923] Bluetooth: XRadio Bluetooth LPM Mode Driver Ver 01.00.06
[    7.624607] read descriptors
[    7.630433] read strings
[    7.694204] type=1400 audit(9.410:3): avc: denied { setattr } for comm="init" name="audio_d" dev="mmcblk0p17" ino=118 scontext=u:r:vendor_init:s0 tcontext=u:object_r:audio_rw_data_file:s0 tclass=dir permissive=1
[    7.716467] type=1400 audit(10.576:4): avc: denied { create } for comm="audio@2.0-servi" scontext=u:r:hal_audio_default:s0 tcontext=u:r:hal_audio_default:s0 tclass=tcp_socket permissive=1
[    7.735545] type=1400 audit(10.576:4): avc: denied { create } for comm="audio@2.0-servi" scontext=u:r:hal_audio_default:s0 tcontext=u:r:hal_audio_default:s0 tclass=tcp_socket permissive=1
[    7.754430] type=1400 audit(10.576:5): avc: denied { setopt } for comm="audio@2.0-servi" scontext=u:r:hal_audio_default:s0 tcontext=u:r:hal_audio_default:s0 tclass=tcp_socket permissive=1
[    7.773487] type=1400 audit(10.576:5): avc: denied { setopt } for comm="audio@2.0-servi" scontext=u:r:hal_audio_default:s0 tcontext=u:r:hal_audio_default:s0 tclass=tcp_socket permissive=1
[    7.792400] type=1400 audit(10.576:6): avc: denied { bind } for comm="audio@2.0-servi" scontext=u:r:hal_audio_default:s0 tcontext=u:r:hal_audio_default:s0 tclass=tcp_socket permissive=1
[    7.811260] type=1400 audit(10.576:6): avc: denied { bind } for comm="audio@2.0-servi" scontext=u:r:hal_audio_default:s0 tcontext=u:r:hal_audio_default:s0 tclass=tcp_socket permissive=1
[    9.047565]
[    9.047565] insmod_device_driver
[    9.047565]
[    9.447247] init: Received control message 'interface_start' for 'android.hardware.camera.provider@2.4::ICameraProvider/legacy/0' from pid: 1636 (/system/bin/hwservicemanager)
[    9.468869] init: starting service 'vendor.camera-provider-2-4'...
[    9.482033] init: couldn't write 1968 to /dev/cpuset/camera-daemon/tasks: No such file or directory
[    9.484341] init: Received control message 'interface_start' for 'android.hardware.camera.provider@2.4::ICameraProvider/legacy/0' from pid: 1636 (/system/bin/hwservicemanager)
[   10.880660] init: Service 'treadahead_process' (pid 1793) exited with status 0
[   10.889032] init: Sending signal 9 to service 'treadahead_process' (pid 1793) process group...
[   10.899342] libprocessgroup: Successfully killed process cgroup uid 0 pid 1793 in 0ms
[   11.063476] init: Opened file '/d/mmc0/mmc0:0001/ext_csd', flags 0
[   11.074690] pvrsrvkm: loading out-of-tree module taints kernel.
[   11.183654] pvrsrvkm gpu: set gpu core rate:504000000 freq:504000000-950000uV dfs:0x00000001
[   11.193185] pvrsrvkm gpu: set gpu core rate:504000000 freq:472500000-950000uV dfs:0x00000002
[   11.202727] pvrsrvkm gpu: set gpu core rate:504000000 freq:441000000-950000uV dfs:0x00000004
[   11.212273] pvrsrvkm gpu: set gpu core rate:252000000 freq:252000000-950000uV dfs:0x00000001
[   11.222109] pvrsrvkm gpu: idle:0 dvfs:0 power:0 No mode:1 volt:0 core:504000000
[   11.230481] PVR_K:  1815: Read BVNC 22.102.54.38 from HW device registers
[   11.238168] PVR_K:  1815: RGX Device registered with BVNC 22.102.54.38
[   11.246635] pvrsrvkm gpu: opp[1/4]: (252000000 Hz, 950000 uV)
[   11.253161] pvrsrvkm gpu: opp[2/4]: (441000000 Hz, 950000 uV)
[   11.259664] pvrsrvkm gpu: opp[3/4]: (472500000 Hz, 950000 uV)
[   11.266168] pvrsrvkm gpu: opp[4/4]: (504000000 Hz, 950000 uV)
[   11.273254] pvrsrvkm gpu: Cooling: power ops not registered, not enabling cooling
[   11.287553] [drm] Initialized pvr 1.11.5516664 20170530 on minor 0
[   11.297429] type=1400 audit(11.226:9): avc: denied { write } for comm="radio_monitor" name="uevent" dev="sysfs" ino=17766 scontext=u:r:radio_monitor:s0 tcontext=u:object_r:sysfs_usb:s0 tclass=file permissive=1
[   11.318545] type=1400 audit(14.186:10): avc: denied { read } for comm="pvrsrvctl" name="modules" dev="proc" ino=4026532037 scontext=u:r:pvr:s0 tcontext=u:object_r:proc_modules:s0 tclass=file permissive=1
[   11.320455] init: Service 'pvrsrvinit' (pid 1815) exited with status 0
[   11.320495] init: Sending signal 9 to service 'pvrsrvinit' (pid 1815) process group...
[   11.356477] type=1400 audit(14.186:10): avc: denied { read } for comm="pvrsrvctl" name="modules" dev="proc" ino=4026532037 scontext=u:r:pvr:s0 tcontext=u:object_r:proc_modules:s0 tclass=file permissive=1
[   11.377249] type=1400 audit(14.210:11): avc: denied { open } for comm="pvrsrvctl" path="/proc/modules" dev="proc" ino=4026532037 scontext=u:r:pvr:s0 tcontext=u:object_r:proc_modules:s0 tclass=file permissive=1
[   11.398756] type=1400 audit(14.210:11): avc: denied { open } for comm="pvrsrvctl" path="/proc/modules" dev="proc" ino=4026532037 scontext=u:r:pvr:s0 tcontext=u:object_r:proc_modules:s0 tclass=file permissive=1
[   11.419976] type=1400 audit(14.210:12): avc: denied { getattr } for comm="pvrsrvctl" path="/proc/modules" dev="proc" ino=4026532037 scontext=u:r:pvr:s0 tcontext=u:object_r:proc_modules:s0 tclass=file permissive=1
[   11.442822] PVR_K:  1820: RGX Firmware image 'rgx.fw.22.102.54.38' loaded
[   11.531105] random: crng init done
[   11.534939] random: 7 urandom warning(s) missed due to ratelimiting
[   15.118719] healthd: battery none chg=
[   15.136022] healthd: battery none chg=
[   15.143077] healthd: battery none chg=
[   15.512728] type=1400 audit(14.210:12): avc: denied { getattr } for comm="pvrsrvctl" path="/proc/modules" dev="proc" ino=4026532037 scontext=u:r:pvr:s0 tcontext=u:object_r:proc_modules:s0 tclass=file permissive=1
[   15.535725] type=1400 audit(1628148019.150:13): avc: denied { read } for comm="android.ui" name="state" dev="sysfs" ino=17470 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   15.557312] type=1400 audit(1628148019.150:13): avc: denied { read } for comm="android.ui" name="state" dev="sysfs" ino=17470 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   15.587460] init: processing action (sys.sysctl.extra_free_kbytes=*) from (/init.rc:806)
[   15.588917] binder: undelivered transaction 3238, process died.
[   15.592211] init: Service 'vendor.camera-provider-2-4' (pid 1968) exited with status 0
[   15.592271] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 1968) process group...
[   15.595255] libprocessgroup: Successfully killed process cgroup uid 1047 pid 1968 in 0ms
[   15.648771] type=1400 audit(1628148019.156:14): avc: denied { open } for comm="android.ui" path="/sys/devices/platform/ite66121/extcon/hdmi/state" dev="sysfs" ino=17470 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   16.595374] acc_open
[   16.597964] acc_release
[   16.898462] init: Received control message 'interface_start' for 'android.hardware.wifi@1.0::IWifi/default' from pid: 1636 (/system/bin/hwservicemanager)
[   16.918746] init: starting service 'vendor.wifi_hal_legacy'...
[   16.932312] init: Received control message 'interface_start' for 'android.hardware.wifi@1.0::IWifi/default' from pid: 1636 (/system/bin/hwservicemanager)
[   17.201150] libphy: gmac0: probed
[   17.313934] sunxi-gmac gmac0 eth0: eth0: Type(7) PHY ID 001cc916 at 0 IRQ poll (gmac0-0:00)
[   17.787532] ======== XRADIO WIFI OPEN ========
[   17.807533] [XRADIO] Driver Label:XR_V02.16.84_P2P_HT40_01.40  Aug  5 2021 15:18:13
[   17.823649] [XRADIO] Allocated hw_priv @ ffffffc01a21d7a0
[   17.857781] sunxi-wlan soc@03000000:wlan@0: bus_index: 1
[   17.944695] [XRADIO] Detect SDIO card 1
[   17.944741] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[   17.944868] sunxi-mmc sdc1: no vqmmc,Check if there is regulator
[   17.963108] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[   17.985035] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[   17.987594] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[   18.034429] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[   18.107520] sunxi-mmc sdc1: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[   18.123847] sunxi-mmc sdc1: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B
[   18.142165] mmc2: new high speed SDIO card at address 0001
[   18.162442] [SBUS] XRadio Device:sdio clk=50000000
[   18.185826] [XRADIO] XRADIO_HW_REV 1.0 detected.
[   18.227511] [XRADIO] xradio_update_dpllctrl: DPLL_CTRL Sync=0x01400000.
[   18.364005] [XRADIO] Bootloader complete
[   18.604222] [XRADIO] Firmware completed.
[   18.614345] [WSM] Firmware Label:XR_C09.08.52.64_DBG_02.100 2GHZ HT40 Jan  3 2020 13:14:37
[   18.634046] [XRADIO] Firmware Startup Done.
[   18.639208] [XRADIO_WRN] enable Multi-Rx!
[   18.653164] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   18.744291] init: Received control message 'interface_start' for 'android.hardware.wifi.supplicant@1.0::ISupplicant/default' from pid: 1636 (/system/bin/hwservicemanager)
[   18.799602] init: starting service 'wpa_supplicant'...
[   18.836102] init: Created socket '/dev/socket/wpa_wlan0', mode 660, user 1010, group 1010
[   19.011470] capability: warning: `wpa_supplicant' uses 32-bit capabilities (legacy support in use)
[   19.164709] ieee80211_do_open: vif_type=2, p2p=0, ch=3, addr=94:17:db:1b:c0:08
[   19.180766] [STA] !!!xradio_vif_setup: id=0, type=2, p2p=0, addr=94:17:db:1b:c0:08
[   19.201771] [AP_WRN] BSS_CHANGED_ASSOC but driver is unjoined.
[   19.228723] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.620774] ieee80211_do_open: vif_type=10, p2p=0, ch=3, addr=94:17:db:1b:c0:09
[   19.630571] [STA] !!!xradio_vif_setup: id=2, type=10, p2p=0, addr=94:17:db:1b:c0:09
[   22.321365] init: processing action (sys.boot_completed=1) from (/init.rc:800)
[   22.337111] init: processing action (sys.boot_completed=1) from (/vendor/etc/init/hw/init.device.rc:44)
[   22.338745] sdcardfs version 2.0
[   22.338750] sdcardfs: dev_name -> /data/media
[   22.338754] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,derive_gid,default_normal,unshared_obb,mask=6,userid=0,gid=1015
[   22.338760] sdcardfs: mnt -> ffffffc0169e8c60
[   22.338853] sdcardfs: mounted on top of /data/media type f2fs
[   22.342429] Remount options were mask=23,gid=9997 for vfsmnt ffffffc00ca5e720.
[   22.342445] sdcardfs : options - debug:1
[   22.342448] sdcardfs : options - gid:9997
[   22.342451] sdcardfs : options - mask:23
[   22.346855] Remount options were mask=7,gid=9997 for vfsmnt ffffffc00ca5f6e0.
[   22.346988] sdcardfs : options - debug:1
[   22.346993] sdcardfs : options - gid:9997
[   22.346995] sdcardfs : options - mask:7
[   22.348066] Remount options were mask=7,gid=9997 for vfsmnt ffffffc00ca60720.
[   22.348078] sdcardfs : options - debug:1
[   22.348082] sdcardfs : options - gid:9997
[   22.348085] sdcardfs : options - mask:7
[   22.519998] get ctp_power is fail, -22
[   22.539240] sunxi_ctp_startup: ctp_power_io is invalid.
[   22.545797] get ctp_gesture_wakeup fail, no gesture wakeup
[   22.566117] 1-005d supply ctp not found, using dummy regulator
[   22.739588] input: gt9xxnew_ts as /devices/virtual/input/input1
[   22.747633] <<-GTP-ERROR->> File PID != Ic PID, update aborted!
[   22.752218] init: Command 'insmod /vendor/modules/gt9xxnew_ts.ko' action=sys.boot_completed=1 (/vendor/etc/init/hw/init.device.rc:46) took 280ms and succeeded
[   22.795783] <<-GTP-ERROR->> [update_proc]Check *.bin file fail.
[   22.810689] init: Command 'insmod /vendor/modules/gt9xxnewdup_ts.ko' action=sys.boot_completed=1 (/vendor/etc/init/hw/init.device.rc:47) took 57ms and failed: finit_module for "/vendor/modules/gt9xxnewdup_ts.ko" failed: Operation not permitted
[   22.852183] selinux: SELinux: Skipping restorecon on directory(/data/system_ce/0)
[   22.852183]
[   22.870931] init: processing action (sys.boot_completed=1) from (/system/etc/init/aw_thermal.rc:10)
[   22.887257] init: starting service 'aw_thermal'...
[   22.948185] init: Command 'start aw_thermal' action=sys.boot_completed=1 (/system/etc/init/aw_thermal.rc:11) took 65ms and succeeded
[   23.010700] init: Async property child exited with status 0
[   23.027486] init: processing action (sys.boot_completed=1 && sys.logbootcomplete=1) from (/system/etc/init/bootstat.rc:78)
[   23.413615] [DISP] de_enhance_set_mode,line:474:
[   23.420573] para excess! mode = 0, enhance_mode = 0, format=255
[   23.433630] [DISP] de_enhance_set_mode,line:474:
[   23.438699] para excess! mode = 0, enhance_mode = 0, format=255
[   23.446241] [DISP] de_enhance_set_mode,line:474:
[   23.451289] para excess! mode = 0, enhance_mode = 0, format=255
[   23.458288] [DISP] de_enhance_set_mode,line:474:
[   23.463786] para excess! mode = 0, enhance_mode = 1, format=255
[   23.470716] [DISP] de_enhance_set_mode,line:474:
[   23.476049] para excess! mode = 0, enhance_mode = 0, format=255
[   23.483492] [DISP] de_enhance_set_mode,line:474:
[   23.488825] para excess! mode = 0, enhance_mode = 0, format=255
[   23.495781] [DISP] de_enhance_set_mode,line:474:
[   23.501095] para excess! mode = 0, enhance_mode = 1, format=255
[   23.508037] [DISP] de_enhance_set_mode,line:474:
[   23.513330] para excess! mode = 0, enhance_mode = 0, format=255
[   23.520781] [DISP] de_enhance_set_mode,line:474:
[   23.526116] para excess! mode = 0, enhance_mode = 0, format=255
[   23.533102] [DISP] de_enhance_set_mode,line:474:
[   23.538644] para excess! mode = 0, enhance_mode = 1, format=255
[   23.545640] [DISP] de_enhance_set_mode,line:474:
[   23.550909] para excess! mode = 0, enhance_mode = 0, format=255
[   23.573475] logd: logdr: UID=1036 GID=1023 PID=1890 b tail=0 logMask=19 pid=0 start=1628148019759408000ns timeout=0ns
[   25.334748] BOOTEVENT:     25334.731777: OFF
[   27.229633] apexd: Can't open /product/apex for reading : No such file or directory
[   27.851087] init: Received control message 'start' for 'gsid' from pid: 2014 (system_server)
[   27.861864] init: starting service 'gsid'...
[   27.940771] init: Received control message 'stop' for 'gsid' from pid: 2014 (system_server)
[   27.950691] init: Sending signal 9 to service 'gsid' (pid 3418) process group...
[   27.965229] libprocessgroup: Successfully killed process cgroup uid 0 pid 3418 in 5ms
[   27.979021] init: Service 'gsid' (pid 3418) received signal 9
[   28.008625] type=1400 audit(1628148019.156:15): avc: denied { getattr } for comm="android.ui" path="/sys/devices/platform/ite66121/extcon/hdmi/state" dev="sysfs" ino=17470 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   28.036386] type=1400 audit(1628148031.653:16): avc: granted { read } for comm="main" name="u:object_r:net_dns_prop:s0" dev="tmpfs" ino=9680 scontext=u:r:untrusted_app_25:s0:c512,c768 tcontext=u:object_r:net_dns_prop:s0 tclass=file app=com.android.email
[   33.185142] type=1400 audit(1628148031.653:16): avc: granted { read } for comm="main" name="u:object_r:net_dns_prop:s0" dev="tmpfs" ino=9680 scontext=u:r:untrusted_app_25:s0:c512,c768 tcontext=u:object_r:net_dns_prop:s0 tclass=file app=com.android.email
[   33.210512] type=1400 audit(1628148036.830:17): avc: denied { dac_override } for comm="irqbalance" capability=1 scontext=u:r:shell:s0 tcontext=u:r:shell:s0 tclass=capability permissive=1

console:/ $
console:/ $
console:/ $

出厂固件是andorid

离线

楼主 #1 2021-09-09 14:45:33

X3
会员
注册时间: 2020-04-08
已发帖子: 33
积分: 28

Re: 刚刚收到的全志AIC800开发板,接个串口打印LOG 试一试

QQ截图20210909144259.png

离线

楼主 #2 2021-09-09 14:46:07

X3
会员
注册时间: 2020-04-08
已发帖子: 33
积分: 28

Re: 刚刚收到的全志AIC800开发板,接个串口打印LOG 试一试

QQ截图20210909144434.png

[  113.670028] pwm device hdl is NULL
[  113.911255] sun50iw10p1-pinctrl pio: expect_func as:lvds3, but muxsel(3) is func:lvds2
[  113.920206] sun50iw10p1-pinctrl pio: expect_func as:lvds3, but muxsel(3) is func:lvds2
[  113.929135] sun50iw10p1-pinctrl pio: expect_func as:lvds3, but muxsel(3) is func:lvds2
[  113.938061] sun50iw10p1-pinctrl pio: expect_func as:lvds3, but muxsel(3) is func:lvds2
[  113.946986] sun50iw10p1-pinctrl pio: expect_func as:lvds3, but muxsel(3) is func:lvds2
[  113.955912] sun50iw10p1-pinctrl pio: expect_func as:lvds3, but muxsel(3) is func:lvds2
[  113.964838] sun50iw10p1-pinctrl pio: expect_func as:lvds3, but muxsel(3) is func:lvds2
[  113.973763] sun50iw10p1-pinctrl pio: expect_func as:lvds3, but muxsel(3) is func:lvds2
[  113.982689] sun50iw10p1-pinctrl pio: expect_func as:lvds3, but muxsel(3) is func:lvds2
[  113.991615] sun50iw10p1-pinctrl pio: expect_func as:lvds3, but muxsel(3) is func:lvds2
[  114.524214] sunxi_ohci_hcd_shutdown, ohci0-controller is disable, need not shutdown
[  114.532867] sunxi_ehci_hcd_shutdown, ehci0-controller is disable, need not shutdown
[  114.541722] reboot: Restarting system with command 'efex'
[4037]HELLO! BOOT0 is starting!
[4040]BOOT0 commit : dc54be6
[4043]set pll start
[4045]periph0 has been enabled
[4049]set pll end
[4051][pmu]: bus read error
[4054][pmu]: bus read error
[4061]vaild para:1  select dram para0
[4065]board init ok
[4067]rtc[3] value = 0xa102
[4070]DRAM BOOT DRIVE INFO: V0.19
[4073]the chip id is 0x2400
[4076]the chip id is 0x2400
[4079]the chip id is 0x2400
[4081]the chip id is 0x2400
[4084]the chip id is 0x2400
[4087]chip id check OK
[4089]DRAM_VCC set to 1100 mv
[4092]DRAM CLK =792 MHZ
[4095]DRAM Type =8 (3:DDR3,4:DDR4,7:LPDDR3,8:LPDDR4)
[4103]DRAM SIZE =1024 MBytes, para1 = 30fa, para2 = 4000000, dram_tpr13 = 6063
[4115]DRAM simple test OK.
[4118]dram size =1024
[4120]chipid = 53002400
[4122]nsi init ok 2020-4-7
[4126]card no is 2
[4128]sdcard 2 line count 8
[4130][mmc]: mmc driver ver 2020-05-25 09:40
[4140][mmc]: Wrong media type 0x0
[4143][mmc]: ***Try SD card 2***
[4148][mmc]: mmc 2 cmd 8 timeout, err 100
[4152][mmc]: mmc 2 cmd 8 err 100
[4155][mmc]: mmc 2 send if cond failed
[4159][mmc]: mmc 2 cmd 55 timeout, err 100
[4164][mmc]: mmc 2 cmd 55 err 100
[4167][mmc]: mmc 2 send app cmd failed
[4171][mmc]: ***Try MMC card 2***
[4195][mmc]: RMCA OK!
[4198][mmc]: mmc 2 bias 4
[4201][mmc]: MMC 5.0
[4203][mmc]: HSSDR52/SDR25 8 bit
[4206][mmc]: 50000000 Hz
[4209][mmc]: 7456 MB
[4211][mmc]: ***SD/MMC 2 init OK!!!***
[4265]Loading boot-pkg Succeed(index=0).
[4269]Entry_name        = u-boot
[4276]Entry_name        = monitor
[4280]Entry_name        = scp
[4288]set arisc reset to de-assert state
[4292]Entry_name        = dtb
[4296]tunning data addr:0x4a0003e8
[4299]Jump to second Boot.
NOTICE:  BL3-1: v1.0(debug):cc1f5d7
NOTICE:  BL3-1: Built : 10:23:25, 2020-04-08
NOTICE:  BL3-1 commit: 8
ERROR:   Error initializing runtime service tspd_fast
NOTICE:  BL3-1: Preparing for EL3 exit to normal world
NOTICE:  BL3-1: Next image address = 0x4a000000
NOTICE:  BL3-1: Next image spsr = 0x1d3

U-Boot 2018.05-00002-g27dfc9348f (Nov 06 2020 - 08:19:02 +0000) Allwinner Technology

[04.377]CPU:   Allwinner Family
[04.380]Model: sun50iw10
I2C:   ready
[04.625]DRAM:  1 GiB
[04.628]Relocation Offset is: 35f17000
[04.657]secure enable bit: 0
[04.660][ARISC] :arisc initialize
[04.665][ARISC ERROR] :get [allwinner,sunxi-hwspinlock] device node error
CACHE: Misaligned operation at range [7ffa72c0, 7ffa75d8]
[04.676][ARISC] :arisc para ok
[SCP] :sunxi-arisc driver begin startup 2
[SCP] :0x1
[SCP] :arisc version: [9b9b85f5ab606cc93b4061ac38834cab8a191a28rid-]
[SCP] :arisc startup ready
[SCP] :arisc startup notify message feedback
[SCP] :send hard sync feedback message: 0x900200
[SCP] :sunxi-arisc driver v1.10 is starting
[04.706][ARISC] :sunxi-arisc driver startup succeeded
[04.712]pmu_axp81X_probe pmic_bus_read fail
[04.716]pmu_axp858_probe pmic_bus_read fail
[04.720]PMU: no found
[04.722]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=400Mhz
[04.729]init_clocks:finish
[04.731]not need merged sunxi overlay
[04.734]drv_disp_init
request pwm success, pwm8:pwm8:0x300a000.
pwm_request: err:this pwm has been requested!
[04.770]drv_disp_init finish
[04.778]gic: sec monitor mode
[04.780]flash init start
[04.783]workmode = 0,storage type = 2
[04.786][mmc]: mmc driver ver uboot2018:2020-5-25 9:26:00-20201021190
[04.800][mmc]: SUNXI SDMMC Controller Version:0x50300
[04.824][mmc]: Best spd md: 2-HSDDR52/DDR50, freq: 2-50000000, Bus width: 8
[04.831]sunxi flash init ok
[04.834]Loading Environment from SUNXI_FLASH... OK
[04.843]no secure os for keybox operation
[04.846]try to burn key
[04.849]out of usb burn from boot: not need burn key
[04.854]boot_gui_init:start
[04.858]set disp.dev2_output_type fail. using defval=0
[04.863]disp 1, clk: pll(490000000),clk(490000000),dclk(70000000) dsi_rate(490000000)
     clk real:pll(492000000),clk(492000000),dclk(70285714) dsi_rate(0)
[04.880]switch device: sel=1, type=1, mode=4, format=0, bits=0, eotf=4, cs=260
[04.887]boot_gui_init:finish
[04.890]bmp_name=bootlogo.bmp
2764856 bytes read in 32 ms (82.4 MiB/s)
[04.941]read item0 copy0
[04.944]Item0 (Map) magic is bad
[04.947]the secure storage item0 copy0 magic is bad
[04.951]Item0 (Map) magic is bad
[04.954]the secure storage item0 copy1 magic is bad
[04.959]Item0 (Map)[04.960]soc ic_ver:0x0, qa_val:0x0, markid:0x53002400 dclk[0-9999]
 magic is bad
[04.968]the secure storage map is empty
[04.971]no item name device_unlock in the map
[04.975]no item name fastboot_status_flag in the map
[04.980]sunxi secure storage has no flag
[04.985][mmc]: delete mmc-hs400-1_8v from dtb
[04.989][mmc]: delete mmc-hs200-1_8v from dtb
[04.993][mmc]: get max-frequency ok 50000000 Hz
[04.999](weak)update dtb dram start
[05.003]update dtb dram  end
[05.006]update dts
[05.008]no item name snum in the map
** Unrecognized filesystem type **
[05.021]load file(ULI/factory/snum.txt) error.
[05.025]no item name mac in the map
** Unrecognized filesystem type **
[05.038]load file(ULI/factory/mac.txt) error.
[05.042]no item name wifi_mac in the map
** Unrecognized filesystem type **
[05.055]load file(ULI/factory/wifi_mac.txt) error.
[05.060]no item name bt_mac in the map
[05.069]LCD open finish
** Unrecognized filesystem type **
[05.078]load file(ULI/factory/bt_mac.txt) error.
[05.082]no item name specialstr in the map
** Unrecognized filesystem type **
[05.096]load file(ULI/factory/specialstr.txt) error.
[05.109]update part info
[05.112]key 0
[05.115]misc partition found
[05.137]bootmode[2]:0x5a
[05.139][mmc]: mmc exit start
[05.158][mmc]: mmc 2 exit ok
[4037]HELLO! BOOT0 is starting!
[4040]BOOT0 commit : dc54be6
[4043]set pll start
[4045]periph0 has been enabled
[4049]set pll end
[4051][pmu]: bus read error
[4054][pmu]: bus read error
[4061]vaild para:1  select dram para0
[4065]board init ok
[4067]rtc[2] value = 0x5aa5a55a
[4070]rtc[3] value = 0xb00f
[4073]eraly jump fel

刷机失败???

离线

楼主 #3 2021-09-09 19:15:03

X3
会员
注册时间: 2020-04-08
已发帖子: 33
积分: 28

Re: 刚刚收到的全志AIC800开发板,接个串口打印LOG 试一试

QQ图片20210909191437.png


搞定

离线

#4 2021-09-09 19:41:40

qianniao29
会员
注册时间: 2020-05-19
已发帖子: 5
积分: 23.5

Re: 刚刚收到的全志AIC800开发板,接个串口打印LOG 试一试

AIC800又复活了?

离线

#5 2021-09-12 09:51:20

xintian
会员
注册时间: 2020-03-28
已发帖子: 3
积分: 2.5

Re: 刚刚收到的全志AIC800开发板,接个串口打印LOG 试一试

AIC800开发板哪里买的?现在是索智在推?

离线

#6 2021-09-12 10:38:43

夜阑卧听
会员
注册时间: 2020-09-15
已发帖子: 1
积分: 0.5

Re: 刚刚收到的全志AIC800开发板,接个串口打印LOG 试一试

在哪里能买到开发板呢?

离线

楼主 #7 2021-09-12 10:53:42

X3
会员
注册时间: 2020-04-08
已发帖子: 33
积分: 28

Re: 刚刚收到的全志AIC800开发板,接个串口打印LOG 试一试

朋友送的,我也不知道他哪里弄来的。

离线

#8 2021-09-12 20:15:19

arychen
会员
注册时间: 2019-04-06
已发帖子: 210
积分: 200.5

Re: 刚刚收到的全志AIC800开发板,接个串口打印LOG 试一试

我也有3片  去年推的时候记得代理那买的,后来代码一直没跟上,就放弃直接上A133了。

离线

#9 2021-09-26 14:23:09

kangxuebin
会员
注册时间: 2020-05-23
已发帖子: 12
积分: 11

Re: 刚刚收到的全志AIC800开发板,接个串口打印LOG 试一试

在哪里能买到开发板呢?

离线

#10 2021-09-26 17:37:42

loveme758
会员
注册时间: 2021-01-25
已发帖子: 14
积分: 7.5

Re: 刚刚收到的全志AIC800开发板,接个串口打印LOG 试一试

太多了,不知道用哪个好了!

离线

页脚

工信部备案:粤ICP备20025096号 Powered by FluxBB

感谢为中文互联网持续输出优质内容的各位老铁们。 QQ: 516333132, 微信(wechat): whycan_cn (哇酷网/挖坑网/填坑网) service@whycan.cn