[ 0.402]
U-Boot 2011.09-rc1-00000-geb34904-dirty (Nov 28 2021 - 17:50:12) Allwinner Technology
[ 0.411]version: 1.1.0
[ 0.414]uboot commit : eb3490458843de28cd4abb59d2013438b3d0f101
ready
set power on vol to default
no battery, limit to dc
no key input
dram_para_set start
dram_para_set end
In: Out: Err: Net: Warning: failed to set MAC address
read boot or recovery all
Verifying Checksum ... OK
OK
OK
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Linux version 3.4.39 (whycan@ubuntu) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #122 Mon Dec 13 22:28:18 CST 2021
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun8i
[ 0.000000] ion_reserve_common: ion reserve: [0x45c00000, 0x48000000]!
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c0702414, node_mem_map c073f000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32512 pages, LIFO batch:7
[ 0.000000] script_init enter!
[ 0.000000] script_init exit!
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/nandd loglevel=8
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 128MB = 128MB total
[ 0.000000] Memory: 85452k/85452k available, 45620k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0680000 (6624 kB)
[ 0.000000] .init : 0xc0680000 - 0xc06aa000 ( 168 kB)
[ 0.000000] .data : 0xc06aa000 - 0xc0702b60 ( 355 kB)
[ 0.000000] .bss : 0xc0702b84 - 0xc073e56c ( 239 kB)
[ 0.000000] NR_IRQS:544
[ 0.000000] 524 ahb1 set parent pll_periph0d2
[ 0.000000] Architected local timer running at 24.00MHz.
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000269] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
[ 0.000321] pid_max: default: 32768 minimum: 301
[ 0.000586] Mount-cache hash table entries: 512
[ 0.001452] CPU: Testing write buffer coherency: ok
[ 0.001799] Setting up static identity map for 0x404d2aa8 - 0x404d2b00
[ 0.002830] devtmpfs: initialized
[ 0.005857] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.006224] pinctrl core: initialized pinctrl subsystem
[ 0.007079] NET: Registered protocol family 16
[ 0.007562] DMA: preallocated 128 KiB pool for atomic coherent allocations
[ 0.007654] script_sysfs_init success
[ 0.007728] sunxi_dump_init success
[ 0.009258] gpiochip_add: registered GPIOs 0 to 223 on device: sunxi-pinctrl
[ 0.011114] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
[ 0.012396] tsc2003 device registered
[ 0.012993] [sunxi-module]: [sunxi-module.0] probe success
[ 0.013079] script config pll_isp to 360 Mhz
[ 0.013130] Not Found clk pll_video in script
[ 0.013162] script config pll_ve to 360 Mhz
[ 0.013203] Not Found clk pll_periph0 in script
[ 0.013225] Not Found clk pll_de in script
[ 0.013240] sunxi_default_clk_init
[ 0.013259] try to set pll6ahb1 to 200000000
[ 0.013283] Error not get clk pll6ahb1
[ 0.013310] Error not get clk pll6ahb1try to set ahb1 to 200000000
[ 0.013353] try to set apb1 to 100000000
[ 0.013742] ===fe3o4==== sunxi_root_procfs_attach ret:0
[ 0.026983] bio: create slab <bio-0> at 0
[ 0.027410] pwm module init!
[ 0.030471] ion_mem.size = 37748736
[ 0.031493] SCSI subsystem initialized
[ 0.031962] usbcore: registered new interface driver usbfs
[ 0.032120] usbcore: registered new interface driver hub
[ 0.032355] usbcore: registered new device driver usb
[ 0.032614] twi_chan_cfg()341 - [twi0] has no twi_speed!
[ 0.032640] twi_chan_cfg()352 - [twi0] has no twi_regulator.
[ 0.032667] twi_chan_cfg()341 - [twi1] has no twi_speed!
[ 0.032690] twi_chan_cfg()352 - [twi1] has no twi_regulator.
[ 0.033629] Linux video capture interface: v2.00
[ 0.034054] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.035689] cfg80211: Calling CRDA to update world regulatory domain
[ 0.037887] Switching to clocksource arch_sys_counter
[ 0.049239] NET: Registered protocol family 2
[ 0.049731] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.050679] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.050864] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.050964] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.050988] TCP: reno registered
[ 0.051014] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.051062] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.051577] NET: Registered protocol family 1
[ 0.052139] RPC: Registered named UNIX socket transport module.
[ 0.052167] RPC: Registered udp transport module.
[ 0.052186] RPC: Registered tcp transport module.
[ 0.052204] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.052540] [pm]aw_pm_init!
[ 0.052567] standby_mode = 1.
[ 0.052583] wakeup src cnt is : 3.
[ 0.052681] sunxi_reg_init enter
[ 0.055273] VFS: Disk quotas dquot_6.5.2
[ 0.055391] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.056175] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.056777] NTFS driver 2.1.30 [Flags: R/W].
[ 0.056962] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.057399] msgmni has been set to 166
[ 0.059793] io scheduler noop registered
[ 0.059820] io scheduler deadline registered
[ 0.059966] io scheduler cfq registered (default)
[ 0.059993] [DISP]disp_module_init
[ 0.060878] cmdline,disp=
[ 0.061914] rotation_sw module is config as no used
[ 0.061970] [DISP] disp_get_rotation_sw,line:78:disp 0 out of range? g_rot_sw=0
[ 0.062004] [DISP] disp_init_connections,line:289:NULL pointer: 0, 0
[ 0.062168] fb_para.width = 240,fb_para.height = 240,fb_para.buffer_num = 2
[ 0.063060] info->var.bits_per_pixel = 32
[ 0.063087] [DISP] Fb_map_kernel_logo,line:924:Fb_map_kernel_logo failed!LCD_power_on 88 ..........
[ 0.067242] LCD_power_on 89 ++++++++++++++++++++++++
[ 0.068739] [DISP]disp_module_init finish
[ 0.069212] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator.
[ 0.069250] sw_uart_get_devinfo()1503 - uart1 has no uart_regulator.
[ 0.069282] sw_uart_get_devinfo()1503 - uart2 has no uart_regulator.
[ 0.070351] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
[ 0.070383] sw_uart_pm()890 - uart0 clk is already enable
[ 0.070422] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
[ 0.263987] LCD_panel_init 122 ..........
[ 0.803708] LCD_panel_init 123 ++++++++++++++++++++++++
[ 0.809666] lcd_panel_st7789s_init 183 ++++++++++++++++++++++++
[ 0.816432] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL
[ 0.826239] console [ttyS0] enabled
[ 0.830876] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
[ 0.838139] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
[ 0.846627] [rf_pm]: failed to fetch wifi configuration!
[ 0.852691] sunxi-rf-pm: probe of sunxi-rf-pm.0 failed with error -1
[ 0.859882] [wifi_pm]: get wl_reg_on gpio failed
[ 0.865369] [wifi_pm]: wifi gpio init is OK !!
[ 0.870459] [rfkill]: init no bt used in configuration
[ 0.877356] spinand type err! 0[NAND]nand init start, spinand_used_flag is -1066850196
[ 0.886318] spinand_cache_level err! 0spinand_capacity_level err! 0
[ 0.893378] NandHwInit: Start Nand Hardware initializing .....
[ 0.899920] kernel:nand version: 2 25 20150917 1145
[ 0.905541] pin count:4
[ 0.908443] request tx DMA
[ 0.911508] request general tx dma channel ok!
[ 0.916489] request rx DMA
[ 0.919521] request general rx dma channel ok!
[ 0.924566] NAND_ClkRequest: get pll6 rate 600000000HZ
[ 0.930404] SPI nand ID: 12c212c2 12c212c2
[ 0.935019] [SCAN_DBG] NandTwoPlaneOp: 1, DriverTwoPlaneOPCfg: 1, 0xffcfffff
[ 0.943049] spinand, spinand_id_number_ctl, nand type err! 0
[ 0.949395] _UpdateExtAccessFreqPara: no para.
[ 0.954679] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL
[ 0.964543] PHY_Scan_DelayMode: right delay mode 0x0
[ 0.970524] PHY_Scan_DelayMode: right delay mode 0x800
[ 0.976321] PHY_Scan_DelayMode: right delay mode,clk 75 MHz, bit[13]=0,bit[11]=1
[ 0.984950] _GetOldPhysicArch: chip 0, block 20, page 0, oob: 0x0, 0x50, 0x48, 0x59
[ 0.993566] _GetOldPhysicArch: get old physic arch ok, 0x6d 0x2!
[ 1.000335] NAND_ReadPhyArch: get old physic arch ok, use old cfg, now:0x2 0x6d - old:0x2 0x6d!
[ 1.010103]
[ 1.010110]
[ 1.013435] [SCAN_DBG] ==============Nand Architecture Parameter==============
[ 1.021552] [SCAN_DBG] Nand Chip ID: 0xffff12c2 0xffffffff
[ 1.028774] [SCAN_DBG] Nand Chip Count: 0x1
[ 1.034257] [SCAN_DBG] Nand Chip Connect: 0x1
[ 1.039725] [SCAN_DBG] Sector Count Of Page: 0x4
[ 1.045218] [SCAN_DBG] Page Count Of Block: 0x40
[ 1.050801] [SCAN_DBG] Block Count Of Die: 0x400
[ 1.056463] [SCAN_DBG] Plane Count Of Die: 0x2
[ 1.061946] [SCAN_DBG] Die Count Of Chip: 0x1
[ 1.067414] [SCAN_DBG] Bank Count Of Chip: 0x1
[ 1.072896] [SCAN_DBG] Optional Operation: 0x6d
[ 1.078462] [SCAN_DBG] Access Frequence: 0x4b
[ 1.084043] [SCAN_DBG] =======================================================
[ 1.084060]
[ 1.093820]
[ 1.095489] [FORMAT_DBG] ===========Logical Architecture Parameter===========
[ 1.103504] [FORMAT_DBG] Page Count of Logic Block: 0x40
[ 1.109851] [FORMAT_DBG] Sector Count of Logic Page: 0x8
[ 1.116104] [FORMAT_DBG] Block Count of Die: 0x200
[ 1.122560] [FORMAT_DBG] Die Count: 0x1
[ 1.128807] [FORMAT_DBG] ===================================================
[ 1.136761] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL
[ 1.148082] nand:found factory_bad_block(new version) table in block:26!
[ 1.155629] nand:support secure storage
[ 1.174085] secure storage updata ok!
[ 1.178196] nand secure storage ok: 21,22
[ 1.182716] NandHwInit: End Nand Hardware initializing ..... OK!
[ 1.190992] nand:found factory_bad_block(new version) table in block:26!
[ 1.198509] nand:support secure storage
[ 1.202833] start block:23
[ 1.206119] [NE]mbr read 12
[ 1.209683] [NE]mbr read ok!
[ 1.212937] [NE]mbr read end!
[ 1.216277] [NE]mbr partition start!
[ 1.220751] [NE]mbr partition ok!
[ 1.224469] [NE]mbr partition end!
[ 1.228298] [NE]new nand info init!!
[ 1.232593] [NE]mbr read 12
[ 1.236150] [NE]mbr read ok!
[ 1.239396] [NE]mbr read end!
[ 1.242757] [NE]get mbr_data table
[ 1.247253] [ND]ok get factory_bad_block table!
[ 1.252458] [ND]factory bad block:0 215!
[ 1.257544] [NE]new_bad_block table new format!
[ 1.263070] [ND]ok get a new bad table!
[ 1.268040] [ND]build all_phy partition start!
[ 1.273044] [NE]mbr partition start!
[ 1.277466] [NE]mbr partition ok!
[ 1.281210] [NE]mbr partition end!
[ 1.285030] [NE]partition_num: 0,size :0x36400,cross_talk 0
[ 1.291301] [NE]part mbr size: 0x800 type: 0
[ 1.296090] [NE]part bootloader size: 0x4000 type: 0
[ 1.301673] [NE]part env size: 0x400 type: 0
[ 1.306462] [NE]part boot size: 0x4000 type: 0
[ 1.311460] [NE]part system size: 0x2d000 type: 0
[ 1.316736] [NE]part UDISK size: 0x800 type: 0
[ 1.321739] st7789v3 init over![ND]factory bad block:0,215 PartitionNO:0
[ 1.329368] [ND]build 1 phy_partition !
[ 1.333686] [ND]nand_info->type :0
[ 1.337498] [ND]nand_info->SectorNumsPerPage :8
[ 1.342592] [ND]nand_info->BytesUserData :16
[ 1.347379] [ND]nand_info->PageNumsPerBlk :64
[ 1.352276] [ND]nand_info->BlkPerChip :512
[ 1.356867] [ND]nand_info->FirstBuild :0
[ 1.361278] [ND]nand_info->FullBitmap :-1066681228
[ 1.366649] [ND]nand_info->bad_block_addr.Chip_NO :0
[ 1.372228] [ND]nand_info->bad_block_addr.Block_NO :13
[ 1.377989] [ND]nand_info->mbr_block_addr.Chip_NO :0
[ 1.383568] [ND]nand_info->mbr_block_addr.Block_NO :12
[ 1.389329] [ND]nand_info->no_used_block_addr.Chip_NO :0
[ 1.395298] [ND]nand_info->no_used_block_addr.Block_NO :16
[ 1.401462] [ND]nand_info->new_bad_block_addr.Chip_NO :0
[ 1.407417] [ND]nand_info->new_bad_block_addr.Block_NO :14
[ 1.413582] [ND]nand_info->new_bad_page_addr :65535
[ 1.419050] [ND]nand_info->partition_nums :1
[ 1.423854] [ND]sizeof partition:1192
[ 1.427959] [ND]nand_info->partition:0:
[ 1.432273] [ND]size:0x36400
[ 1.435500] [ND]cross_talk:0x0
[ 1.438921] [ND]attribute:0x0
[ 1.442261] [ND]start: chip:0 block:16
[ 1.446464] [ND]end : chip:0 block:511
[ 1.451234] [ND]nand_partition0
[ 1.454877] [ND]nftl start:496,62
[ 1.458712] [ND]first
[ 1.485312] [ND]bad block: 199
[ 1.524369] [ND]before second 495 434.
[ 1.528673] LCD_bl_open 104 ..........
[ 1.532916] LCD_bl_open 105 ++++++++++++++++++++++++
[ 1.538614] [DISP] disp_lcd_pwm_enable,line:1023:pwm device hdl is NULL
[ 1.703907] [NE]smart->version:aaaaaa01;
[ 1.708318] [NE]smart->total_recv_read_sectors:9022;
[ 1.713912] [NE]smart->total_recv_write_sectors:184534;
[ 1.719770] [NE]smart->total_real_read_pages:1245;
[ 1.725157] [NE]smart->total_real_write_pages:23552;
[ 1.730737] [NE]smart->total_recv_discard_sectors:0;
[ 1.736303] [NE]smart->total_real_discard_sectors:0;
[ 1.741883] [NE]smart->total_recv_read_claim_pages:0;
[ 1.747546] [NE]smart->total_gc_times:0;
[ 1.751956] [NE]smart->total_gc_pages:0;
[ 1.756353] [NE]smart->total_wl_times:0;
[ 1.760763] [NE]smart->total_real_read_error_pages:0;
[ 1.766426] [NE]smart->total_real_write_error_pages:0;
[ 1.772201] [NE]smart->total_normal_power_cycles:2;
[ 1.777669] [NE]smart->total_unusual_power_cycles:0;
[ 1.783248] [NE]smart->max_block_erase_times:0;
[ 1.788326] [NE]smart->min_block_erase_times:0;
[ 1.793418] [NE]smart->max_block_used_counter:0;
[ 1.798594] [NE]smart->min_block_used_counter:0;
[ 1.803783] [NE]smart->read_reclaim_utc:0;
[ 1.811149] [NE]recover_phy_page_mapping no used page 5!!
[ 1.817209] [ND]recover 126 5
[ 1.820561] [ND]A64 nand2.0 version:0009
[ 1.825057] [ND]zone->nand_chip->blk_per_chip: 496
[ 1.830542] [ND]zone->nand_chip->bytes_per_page: 4096
[ 1.836303] [ND]zone->nand_chip->pages_per_blk: 64
[ 1.841786] [ND]zone->nand_chip->max_erase_times: 3000
[ 1.847645] [ND]zone->nand_chip->support_read_reclaim: 1
[ 1.853711] [ND]zone->test: 0
[ 1.857133] [ND]zone->zone_no: 0
[ 1.860860] [ND]zone->zone_attr: 0
[ 1.864762] [ND]zone->blocks: 495
[ 1.868574] [ND]zone->bad_block: 1
[ 1.872498] [ND]zone->logic_cap_in_sects: 222208
[ 1.877771] [ND]zone->backup_cap_in_sects: 31232
[ 1.883058] [ND]zone->free_block_num: 126
[ 1.887651] [ND]zone->gc_strategy.start_gc_free_blocks: 12
[ 1.893912] [ND]zone->gc_strategy.stop_gc_free_blocks: 40
[ 1.900076] [ND]zone->gc_strategy.gc_page: 0
[ 1.904960] [ND]zone->gc_strategy.process: 1
[ 1.909843] [ND]zone->prio_gc.prio_type : 0
[ 1.914644] [ND]zone->zone_start_phy_block->phy_block.Block_NO: 0
[ 1.921589] [ND]zone->zone_end_phy_block->phy_block.Block_NO: 495
[ 1.928520] [ND]zone->zone_phy_page_map_for_gc: c55f2800
[ 1.934588] [ND]zone->current_block.user_info: c55ad000
[ 1.940558] [ND]zone->current_block.block_info: c55e91b8
[ 1.946612] [ND]zone->current_block.block_info->phy_block.Block_NO: 126
[ 1.954140] [ND]zone->current_block.page_used: 5
[ 1.959414] [ND]zone->current_block.block_info->block_used_count: 368
[ 1.966748] [ND]zone->read_reclaim_complete: 0
[ 1.971842] [ND]zone->temp_page_buf: c55e7000
[ 1.976823] [ND]zone->max_erase_num: 1
[ 1.981136] [ND]zone->cache.cache_totals: 0
[ 1.985923] [ND]zone->cfg->nftl_dont_use_cache: 1
[ 1.991308] [ND]zone->cfg->nftl_use_cache_sort: 1
[ 1.996680] [ND]zone->cfg->nftl_support_gc_read_reclaim: 1
[ 2.002945] [ND]zone->cfg->nftl_support_wear_leveling: 1
[ 2.008997] [ND]zone->cfg->nftl_need_erase: 0
[ 2.013993] [ND]zone->cfg->nftl_min_free_block_num: 32
[ 2.019852] [ND]zone->cfg->nftl_gc_threshold_free_block_num: a
[ 2.026503] [ND]zone->cfg->nftl_min_free_block: a
[ 2.031889] [ND]zone->cfg->nftl_gc_threshold_ratio_numerator: 2
[ 2.038624] [ND]zone->cfg->nftl_gc_threshold_ratio_denominator: 3
[ 2.045568] [ND]zone->cfg->nftl_max_cache_num: 20
[ 2.050954] [ND]zone->cfg->nftl_max_cache_write_num: 10
[ 2.056910] [ND]zone->cfg->nftl_cross_talk: 0
[ 2.061906] [ND]zone->cfg->nftl_read_claim_interval: 1296000
[ 2.068349] [NE]smart->version:aaaaaa01;
[ 2.072759] [NE]smart->total_recv_read_sectors:9022;
[ 2.078325] [NE]smart->total_recv_write_sectors:184534;
[ 2.084197] [NE]smart->total_real_read_pages:1251;
[ 2.089568] [NE]smart->total_real_write_pages:23552;
[ 2.095147] [NE]smart->total_recv_discard_sectors:0;
[ 2.100726] [NE]smart->total_real_discard_sectors:0;
[ 2.106292] [NE]smart->total_recv_read_claim_pages:0;
[ 2.111969] [NE]smart->total_gc_times:0;
[ 2.116366] [NE]smart->total_gc_pages:0;
[ 2.120776] [NE]smart->total_wl_times:0;
[ 2.125173] [NE]smart->total_real_read_error_pages:0;
[ 2.130850] [NE]smart->total_real_write_error_pages:0;
[ 2.136610] [NE]smart->total_normal_power_cycles:2;
[ 2.142093] [NE]smart->total_unusual_power_cycles:0;
[ 2.147658] [NE]smart->max_block_erase_times:0;
[ 2.152750] [NE]smart->min_block_erase_times:0;
[ 2.157829] [NE]smart->max_block_used_counter:0;
[ 2.163018] [NE]smart->min_block_used_counter:0;
[ 2.168194] [NE]smart->read_reclaim_utc:0;
[ 2.172797] [ND]nftl ok!
[ 2.175729] [ND]max_erase_times = 65000
[ 2.180268] [NAND]nand_dev add mbr
[ 2.184090] [NAND]nand_dev add bootloader
[ 2.190586] nanda:
[ 2.193417] [NAND]nand_dev add env
[ 2.200740] nandb: unknown partition table
[ 2.205926] [NAND]nand_dev add boot
[ 2.213312] nandc: unknown partition table
[ 2.218505] [NAND]nand_dev add system
[ 2.226063] nandd: unknown partition table
[ 2.231326] [NAND]nand_dev add UDISK
[ 2.237279] nande: unknown partition table
[ 2.242704] [NAND]nand init end
[ 2.246920] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator.
[ 2.255163] spi spi0: master is unqueued, this is deprecated
[ 2.261848] m25p_probe()966 - Use the Dual Mode Read.
[ 2.267630] NorFlash ID: 0x18425 - 0x8425
[ 2.272194] m25p80 spi0.0: unrecognized JEDEC id 018425
[ 2.279844] usbcore: registered new interface driver rtl8192cu
[ 2.286610] usbcore: registered new interface driver rt2500usb
[ 2.293355] usbcore: registered new interface driver rt73usb
[ 2.299822] usbcore: registered new interface driver rt2800usb
[ 2.306422] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.333878] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.342921] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
[ 2.351590] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
[ 2.370051] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
[ 2.378026] hub 1-0:1.0: USB hub found
[ 2.382326] hub 1-0:1.0: 1 port detected
[ 2.387615] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.414743] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 2.423393] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
[ 2.431997] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
[ 2.495198] hub 2-0:1.0: USB hub found
[ 2.499438] hub 2-0:1.0: 1 port detected
[ 2.504713] Initializing USB Mass Storage driver...
[ 2.510476] usbcore: registered new interface driver usb-storage
[ 2.517214] USB Mass Storage support registered.
[ 2.522525] usbcore: registered new interface driver ums-cypress
[ 2.529340] usbcore: registered new interface driver ums_eneub6250
[ 2.536411] usbcore: registered new interface driver ums-freecom
[ 2.543245] usbcore: registered new interface driver ums-isd200
[ 2.549986] usbcore: registered new interface driver ums-jumpshot
[ 2.556977] usbcore: registered new interface driver ums-realtek
[ 2.563813] usbcore: registered new interface driver ums-sddr09
[ 2.570567] usbcore: registered new interface driver ums-sddr55
[ 2.577285] usbcore: registered new interface driver ums-usbat
[ 2.584510] file system registered
[ 2.591380] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.599106] android_usb gadget: Number of LUNs=1
[ 2.604467] lun0: LUN: removable file: (no medium)
[ 2.610904] android_usb gadget: android_usb ready
[ 2.616836] mousedev: PS/2 mouse device common for all mice
[ 2.623316] sunxikbd_script_init: key para not found, used default para.
[ 2.632672] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
[ 2.640253] i2c /dev entries driver
[ 2.644843] uvcvideo: Adding mapping Brightness to control 00000000-0000-0000-0000-000000000101/2.
[ 2.654997] uvcvideo: Adding mapping Contrast to control 00000000-0000-0000-0000-000000000101/3.
[ 2.664876] uvcvideo: Adding mapping Hue to control 00000000-0000-0000-0000-000000000101/6.
[ 2.674265] uvcvideo: Adding mapping Saturation to control 00000000-0000-0000-0000-000000000101/7.
[ 2.684367] uvcvideo: Adding mapping Sharpness to control 00000000-0000-0000-0000-000000000101/8.
[ 2.694345] uvcvideo: Adding mapping Gamma to control 00000000-0000-0000-0000-000000000101/9.
[ 2.703931] uvcvideo: Adding mapping Backlight Compensation to control 00000000-0000-0000-0000-000000000101/1.
[ 2.715173] uvcvideo: Adding mapping Gain to control 00000000-0000-0000-0000-000000000101/4.
[ 2.724678] uvcvideo: Adding mapping Power Line Frequency to control 00000000-0000-0000-0000-000000000101/5.
[ 2.735730] uvcvideo: Adding mapping Hue, Auto to control 00000000-0000-0000-0000-000000000101/16.
[ 2.745807] uvcvideo: Adding mapping Exposure, Auto to control 00000000-0000-0000-0000-000000000001/2.
[ 2.756273] uvcvideo: Adding mapping Exposure, Auto Priority to control 00000000-0000-0000-0000-000000000001/3.
[ 2.767617] uvcvideo: Adding mapping Exposure (Absolute) to control 00000000-0000-0000-0000-000000000001/4.
[ 2.778568] uvcvideo: Adding mapping White Balance Temperature, Auto to control 00000000-0000-0000-0000-000000000101/11.
[ 2.790788] uvcvideo: Adding mapping White Balance Temperature to control 00000000-0000-0000-0000-000000000101/10.
[ 2.802422] uvcvideo: Adding mapping White Balance Component, Auto to control 00000000-0000-0000-0000-000000000101/13.
[ 2.814442] uvcvideo: Adding mapping White Balance Blue Component to control 00000000-0000-0000-0000-000000000101/12.
[ 2.826365] uvcvideo: Adding mapping White Balance Red Component to control 00000000-0000-0000-0000-000000000101/12.
[ 2.838196] uvcvideo: Adding mapping Focus (absolute) to control 00000000-0000-0000-0000-000000000001/6.
[ 2.848875] uvcvideo: Adding mapping Focus, Auto to control 00000000-0000-0000-0000-000000000001/8.
[ 2.859055] uvcvideo: Adding mapping Zoom, Absolute to control 00000000-0000-0000-0000-000000000001/11.
[ 2.869622] uvcvideo: Adding mapping Zoom, Continuous to control 00000000-0000-0000-0000-000000000001/12.
[ 2.880388] uvcvideo: Adding mapping Privacy to control 00000000-0000-0000-0000-000000000001/17.
[ 2.890441] usbcore: registered new interface driver uvcvideo
[ 2.896885] USB Video Class driver (v1.0.8_SONiX_v2.6.36.04)
[ 2.903478] sunxi cedar version 0.1
[ 2.907606] [cedar]: install start!!!
[ 2.912179] [cedar]: install end!!!
[ 2.916160] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0
[ 2.923608] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf
[ 2.935092] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)
[ 2.942659] wdt_enable, write reg 0xf1c20cb8 val 0x00000000
[ 2.948918] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec
[ 2.958399] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.114 2015-6-2 10:21) Compiled in Dec 13 2021 at 11:12:54
[ 2.969868] [mmc]: get mmc0's IO(sdc_cd) failed
[ 2.974996] [mmc]: get mmc0's sdc_power failed
[ 2.980037] [mmc]: get mmc1's sdc_power failed
[ 2.985039] [mmc]: MMC host used card: 0x3, boot card: 0x0, io_card 2
[ 2.993341] [mmc]: *** sunxi_mci_request_mmcio(L1379): sdc0 request io(cd) failed
[ 3.001805] [mmc]: *** sunxi_mci_resource_request(L1580): sdc0 request mmcio failed
[ 3.010899] [mmc]: *** sunxi_mci_free_mmcio(L1504): sdc0 set cd mulsel failed
[ 3.018911] [mmc]: *** sunxi_mci_probe(L3090): sunxi-mmc.0: Failed to get resouce.
[ 3.028442] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.041729] sunxi_leds_fetch_sysconfig_para script_parser_fetch "leds_para" leds_used = -1066837212
[ 3.051981] =========script_get_err============
[ 3.057718] usbcore: registered new interface driver usbhid
[ 3.064055] usbhid: USB HID core driver
[ 3.069121] usbcore: registered new interface driver snd-usb-audio
[ 3.076331] Netfilter messages via NETLINK v0.30.
[ 3.081669] nfnl_acct: registering with nfnetlink.
[ 3.087156] nf_conntrack version 0.5.0 (1335 buckets, 5340 max)
[ 3.094555] ctnetlink v0.93: registering with nfnetlink.
[ 3.100664] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 3.108476] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 3.115603] xt_time: kernel timezone is -0000
[ 3.120567] ip_set: protocol 6
[ 3.124470] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.130794] arp_tables: (C) 2002 David S. Miller
[ 3.136092] TCP: cubic registered
[ 3.140172] NET: Registered protocol family 10
[ 3.146825] IPv6 over IPv4 tunneling driver
[ 3.152945] NET: Registered protocol family 17
[ 3.158199] ThumbEE CPU extension supported.
[ 3.163081] Registering SWP/SWPB emulation handler
[ 3.170745] sunxi-rtc sunxi-rtc: setting system clock to 1970-01-01 00:01:27 UTC (87)
[ 3.182227] =========GPS========= :failed to fetch gps configuration!
[ 3.189477] ALSA device list:
[ 3.192872] No soundcards found.
[ 4.762231] TC Complete wait status timeout!
[ 4.767034] wait tc complete timeout!
[ 6.335585] TC Complete wait status timeout!
[ 6.340388] wait tc complete timeout!
[ 6.344502] PHY_PageRead bad flag: bank 0x0 block 0x1ed page 0xa
[ 6.351580] PHY_PageRead : bank 0 blk 493 pg 10 read timeout
[ 7.923438] TC Complete wait status timeout!
[ 7.928240] wait tc complete timeout!
[ 9.496813] TC Complete wait status timeout!
[ 9.501613] wait tc complete timeout!
[ 9.505727] PHY_PageRead bad flag: bank 0x0 block 0x1ed page 0xa
[ 9.512806] PHY_PageRead : bank 0 blk 493 pg 10 read timeout
[ 11.084361] TC Complete wait status timeout!
[ 11.089160] wait tc complete timeout!
[ 12.657759] TC Complete wait status timeout!
[ 12.662582] wait tc complete timeout!
[ 12.666714] PHY_PageRead bad flag: bank 0x0 block 0x1ed page 0xa
[ 12.673793] PHY_PageRead : bank 0 blk 493 pg 10 read timeout
[ 14.245408] TC Complete wait status timeout!
[ 14.250224] wait tc complete timeout!
[ 15.818857] TC Complete wait status timeout!
[ 15.823657] wait tc complete timeout!
[ 15.827771] PHY_PageRead bad flag: bank 0x0 block 0x1ed page 0xa
[ 15.834850] PHY_PageRead : bank 0 blk 493 pg 10 read timeout
[ 17.406156] TC Complete wait status timeout!
[ 17.410967] wait tc complete timeout!
[ 18.979522] TC Complete wait status timeout!
[ 18.984322] wait tc complete timeout!
[ 18.988436] PHY_PageRead bad flag: bank 0x0 block 0x1ed page 0xb
[ 18.995515] PHY_PageRead : bank 0 blk 493 pg 11 read timeout
[ 20.566761] TC Complete wait status timeout!
[ 20.571572] wait tc complete timeout!
[ 22.140095] TC Complete wait status timeout!
[ 22.144882] wait tc complete timeout!
[ 22.148996] PHY_PageRead bad flag: bank 0x0 block 0x1ed page 0xc
[ 22.156074] PHY_PageRead : bank 0 blk 493 pg 12 read timeout
[ 23.727225] TC Complete wait status timeout!
[ 23.732036] wait tc complete timeout!
[ 25.300566] TC Complete wait status timeout!
[ 25.305353] wait tc complete timeout!
[ 25.309467] PHY_PageRead bad flag: bank 0x0 block 0x1ed page 0xd
[ 25.316547] PHY_PageRead : bank 0 blk 493 pg 13 read timeout
[ 26.888137] TC Complete wait status timeout!
[ 26.892954] wait tc complete timeout!
[ 28.461548] TC Complete wait status timeout!
[ 28.466359] wait tc complete timeout!
[ 28.470504] PHY_PageRead bad flag: bank 0x0 block 0x1ed page 0xa
[ 28.477536] PHY_PageRead : bank 0 blk 493 pg 10 read timeout
[ 30.049015] TC Complete wait status timeout!
[ 30.053828] wait tc complete timeout!
[ 30.057941] TX FIFO size error!
[ 31.625967] TC Complete wait status timeout!
[ 31.630791] wait tc complete timeout!
[ 31.634904] PHY_PageRead bad flag: bank 0x0 block 0x1ed page 0xa
[ 31.641983] PHY_PageRead : bank 0 blk 493 pg 10 read timeout
[ 33.213375] TC Complete wait status timeout!
[ 33.218172] wait tc complete timeout!
[ 34.786900] TC Complete wait status timeout!
[ 34.791723] wait tc complete timeout!
[ 34.795852] PHY_PageRead bad flag: bank 0x0 block 0x1ed page 0xa
[ 34.802902] PHY_PageRead : bank 0 blk 493 pg 10 read timeout
[ 34.809400] List of all partitions:
[ 34.813365] 5d00 8192 nanda (driver?)
[ 34.818658] 5d08 512 nandb (driver?)
[ 34.823971] 5d10 8192 nandc (driver?)
[ 34.829260] 5d18 92160 nandd (driver?)
[ 34.834566] 5d20 1024 nande (driver?)
[ 34.839845] No filesystem could mount root, tried: ext3 ext2 ext4 cramfs squashfs vfat ntfs
[ 34.849378] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(93,24)
[ 34.858856] Backtrace:
[ 34.861666] [<c0013490>] (dump_backtrace+0x0/0x110) from [<c04cc024>] (dump_stack+0x18/0x1c)
[ 34.871153] r6:00008000 r5:c5437029 r4:c5437029 r3:00000001
[ 34.877578] [<c04cc00c>] (dump_stack+0x0/0x1c) from [<c04cc22c>] (panic+0x78/0x1cc)
[ 34.886216] [<c04cc1b4>] (panic+0x0/0x1cc) from [<c0680cf8>] (mount_block_root+0x1e0/0x224)
[ 34.895603] r3:c5427ef4 r2:00000020 r1:c5427f20 r0:c05d5363
[ 34.902017] r7:c06a3c84
[ 34.904898] [<c0680b18>] (mount_block_root+0x0/0x224) from [<c0680e2c>] (mount_root+0xf0/0x110)
[ 34.914696] [<c0680d3c>] (mount_root+0x0/0x110) from [<c0680f70>] (prepare_namespace+0x124/0x184)
[ 34.924665] r7:c0702bc0 r6:c06a3c5c r5:c06a3c95 r4:c0702c24
[ 34.931107] [<c0680e4c>] (prepare_namespace+0x0/0x184) from [<c06808f0>] (kernel_init+0x16c/0x1a8)
[ 34.941173] r5:c06a3c7c r4:00000007
[ 34.945233] [<c0680784>] (kernel_init+0x0/0x1a8) from [<c0031bf8>] (do_exit+0x0/0x660)[ 34.791723] wait tc complete timeout!
[ 34.795852] PHY_PageRead bad flag: bank 0x0 block 0x1ed page 0xa
[ 34.802902] PHY_PageRead : bank 0 blk 493 pg 10 read timeout
[ 34.809400] List of all partitions:
[ 34.813365] 5d00 8192 nanda (driver?)
[ 34.818658] 5d08 512 nandb (driver?)
[ 34.823971] 5d10 8192 nandc (driver?)
[ 34.829260] 5d18 92160 nandd (driver?)
[ 34.834566] 5d20 1024 nande (driver?)
[ 34.839845] No filesystem could mount root, tried: ext3 ext2 ext4 cramfs squashfs vfat ntfs
[ 34.849378] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(93,24)
[ 34.858856] Backtrace:
[ 34.861666] [<c0013490>] (dump_backtrace+0x0/0x110) from [<c04cc024>] (dump_stack+0x18/0x1c)
[ 34.871153] r6:00008000 r5:c5437029 r4:c5437029 r3:00000001
[ 34.877578] [<c04cc00c>] (dump_stack+0x0/0x1c) from [<c04cc22c>] (panic+0x78/0x1cc)
[ 34.886216] [<c04cc1b4>] (panic+0x0/0x1cc) from [<c0680cf8>] (mount_block_root+0x1e0/0x224)
[ 34.895603] r3:c5427ef4 r2:00000020 r1:c5427f20 r0:c05d5363
[ 34.902017] r7:c06a3c84
[ 34.904898] [<c0680b18>] (mount_block_root+0x0/0x224) from [<c0680e2c>] (mount_root+0xf0/0x110)
[ 34.914696] [<c0680d3c>] (mount_root+0x0/0x110) from [<c0680f70>] (prepare_namespace+0x124/0x184)
[ 34.924665] r7:c0702bc0 r6:c06a3c5c r5:c06a3c95 r4:c0702c24
[ 34.931107] [<c0680e4c>] (prepare_namespace+0x0/0x184) from [<c06808f0>] (kernel_init+0x16c/0x1a8)
[ 34.941173] r5:c06a3c7c r4:00000007
[ 34.945233] [<c0680784>] (kernel_init+0x0/0x1a8) from [<c0031bf8>] (do_exit+0x0/0x660)离线