U-Boot SPL 2020.07-dirty (Aug 20 2020 - 00:42:14 -0700)
DRAM: 128 MiB
Failed to set core voltage! Can't set CPU frequency
Trying to boot from MMC1
U-Boot 2020.07-dirty (Aug 20 2020 - 00:42:14 -0700) Allwinner Technology
CPU: Allwinner A33 (SUN8I 1667)
Model: Sinlinx SinA33
DRAM: 128 MiB
MMC: mmc@1c0f000: 0, mmc@1c11000: 1
Loading Environment from FAT... Card did not respond to voltage select!
Setting up a 800x480 lcd console (overscan 0x0)
In: serial
Out: vga
Err: vga
Allwinner mUSB OTG (Peripheral)
Net:
Warning: usb_ether using MAC address from ROM
eth0: usb_ether
starting USB...
Bus usb@1c1a000: USB EHCI 1.00
Bus usb@1c1a400: USB OHCI 1.0
scanning bus usb@1c1a000 for devices... 1 USB Device(s) found
scanning bus usb@1c1a400 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
355 bytes read in 3 ms (115.2 KiB/s)
## Executing script at 41900000
** Reading file would overwrite reserved memory **
There is no valid bmp file at the given address
** Reading file would overwrite reserved memory **
** Reading file would overwrite reserved memory **
SCRIPT FAILED: continuing...
Card did not respond to voltage select!
Device 0: unknown device
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/01-de-ad-be-ef-00-01
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000000
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000000
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-sunxi-sunxi
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-sunxi
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.Config file not found
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.=>离线
找到了: https://github.com/u-boot/u-boot/blob/master/fs/fs.c
#ifdef CONFIG_LMB
/* Check if a file may be read to the given address */
static int fs_read_lmb_check(const char *filename, ulong addr, loff_t offset,
loff_t len, struct fstype_info *info)
{
struct lmb lmb;
int ret;
loff_t size;
loff_t read_len;
/* get the actual size of the file */
ret = info->size(filename, &size);
if (ret)
return ret;
if (offset >= size) {
/* offset >= EOF, no bytes will be written */
return 0;
}
read_len = size - offset;
/* limit to 'len' if it is smaller */
if (len && len < read_len)
read_len = len;
lmb_init_and_reserve(&lmb, gd->bd, (void *)gd->fdt_blob);
lmb_dump_all(&lmb);
if (lmb_alloc_addr(&lmb, addr, read_len) == addr)
return 0;
printf("** Reading file would overwrite reserved memory **\n");
return -ENOSPC;
}离线