WhyCan Forum(哇酷开发者社区)

xel

会员

注册时间： 2018-07-09

已发帖子： 15

积分： 114.5

Tina 生成的img使用PhoenixSuit烧录报错

SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
[05.535]Loading Environment from SUNXI_FLASH... OK
[05.540]Net:   [05.541]Net Initialization Skipped
[05.544]No ethernet found.
Hit any key to stop autoboot:  0 
sunxi work mode=0x10
run usb efex
delay time 2500

weak:otg_phy_config
usb init ok

set address 0x2f
set address 0x2f ok

SUNXI_EFEX_ERASE_TAG
erase_flag = 0x1
FEX_CMD_fes_verify_status
FEX_CMD_fes_verify last err=0
the 0 mbr table is ok
*************MBR DUMP***************
total mbr part 7

part[0] name      :boot
part[0] classname :DISK
part[0] addrlo    :0x20
part[0] lenlo     :0x1800
part[0] user_type :32768
part[0] keydata   :0
part[0] ro        :0

part[1] name      :rootfs
part[1] classname :DISK
part[1] addrlo    :0x1820

part[1] lenlo     :0x2f00
part[1] user_type :32768
part[1] keydata   :0
part[1] ro        :0

part[2] name      :extend
part[2] classname :DISK
part[2] addrlo    :0x4720
part[2] lenlo     :0x2900
part[2] user_type :32768

part[2] keydata   :0
part[2] ro        :0


part[3] name      :rootfs_data
part[3] classname :DISK
part[3] addrlo    :0x7020
part[3] lenlo     :0x400
part[3] user_type :32768
part[3] keydata   :0
part[3] ro        :0

part[4] name      :env
part[4] classname :DISK
part[4] addrlo    :0x7420
part[4] lenlo     :0x200
part[4] user_type :32768
part[4] keydata   :0
part[4] ro        :0

part[5] name      :misc
part[5] classname :DISK
part[5] addrlo    :0x7620
part[5] lenlo     :0x80
part[5] user_type :32768
part[5] keydata   :0

part[5] ro        :0

part[6] name      :UDISK
part[6] classname :DISK
part[6] addrlo    :0x76a0
part[6] lenlo     :0x0
part[6] user_type :0
part[6] keydata   :0
part[6] ro        :0

need erase flash: 1
no part need to protect user data
erase size: 4096 ,sector size: 4096
total 4096 sectors, erase index 0

total 4096 sectors, erase index 256

total 4096 sectors, erase index 512

total 4096 sectors, erase index 768

total 4096 sectors, erase index 1024

total 4096 sectors, erase index 1280

total 4096 sectors, erase index 1536

total 4096 sectors, erase index 1792

total 4096 sectors, erase index 2048

total 4096 sectors, erase index 2304

total 4096 sectors, erase index 2560

total 4096 sectors, erase index 2816

total 4096 sectors, erase index 3072

total 4096 sectors, erase index 3328

total 4096 sectors, erase index 3584

total 4096 sectors, erase index 3840

SUNXI_EFEX_MBR_TAG
mbr size = 0x4000

write primary GPT success
SF: write offset not multiple of erase size

SF: write offset not multiple of erase size
write Backup GPT success
FEX_CMD_fes_verify_status
FEX_CMD_fes_verify last err=0

FEX_CMD_fes_verify_value, start 0x20, size high 0x0:low 0x25e448
FEX_CMD_fes_verify_value 0x670b5304

串口打印之后上位机就报错停止了烧录,有盆友遇到过吗.

xel

会员

注册时间： 2018-07-09

已发帖子： 15

积分： 114.5

Re: Tina 生成的img使用PhoenixSuit烧录报错

换 MX 的flash试一试， 或者跟踪一下u-boot代码

话说全志的SDK太恶心了。。。

uboot 是预编译的..