Hi y'all,
I built and sdcard image for the Lichee Pi Nano using the buildroot image at https://github.com/florpor. However on booting with the flashed sdcard
U-Boot SPL 2018.01-05679-g013ca457fd-dirty (Aug 02 2019 - 09:57:28) DRAM: 32 MiB Trying to boot from MMC1
and it hangs indefinitely. I would be very grateful for any ideas
离线
Hi tigger,
My goal is to boot from an sd card. not the NOR flash. I've swapped sd cards and it is still stuck at trying to boot from mmc1. Is this a general problem with this board?
离线
Hi X3,
Can you point me to the source of your information ??
离线