ns2009的驱动移植好了，点击屏幕的时候没反应 log里面显示....

androidno · 2020-04-01 15:47:37

[ 138.565093] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[ 138.583451] input input0: Poll touch data failed: -110
[ 140.725056] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[ 140.743392] input input0: Poll touch data failed: -110
[ 142.885015] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[ 142.903319] input input0: Poll touch data failed: -110
[ 145.044991] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[ 145.063361] input input0: Poll touch data failed: -110
[ 147.204992] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[ 147.223281] input input0: Poll touch data failed: -110
[ 149.364993] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[ 149.383260] input input0: Poll touch data failed: -110
[ 151.524986] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[ 151.543327] input input0: Poll touch data failed: -110
[ 153.684983] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[ 153.703151] input input0: Poll touch data failed: -110
[ 155.844985] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[ 155.863320] input input0: Poll touch data failed: -110
[ 158.005008] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[ 158.023374] input input0: Poll touch data failed: -110
[ 160.164987] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[ 160.183321] input input0: Poll touch data failed: -110
[ 162.325083] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[ 162.343434] input input0: Poll touch data failed: -110
^C[ 164.485012] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[ 164.503360] input input0: Poll touch data failed: -110

wupaul2001 · 2020-04-01 15:53:02

I2c加上拉电阻

wupaul2001 · 2020-04-01 15:53:39

nano pi没上拉电阻，要自己加

androidno · 2020-04-01 16:33:44

wupaul2001 说：

I2c加上拉电阻

是e11那吗

晕哥 · 2020-04-01 16:35:06

参考这个: https://whycan.cn/t_1744.html#p37251

androidno · 2020-04-01 17:18:20

晕哥说：

参考这个: https://whycan.cn/t_1744.html#p37251

可以了谢谢晕哥~ 直接e11 e12 接上拉电阻就可以了
但是屏幕没有校准~

晕哥 · 2020-04-01 17:20:52

ts_calibrate
ts_test

androidno · 2020-04-01 17:59:28

晕哥说：

ts_calibrate
ts_test

晕哥 ts_lib 的链接有没找了一圈没找到呢~

androidno · 2020-04-01 18:00:17

晕哥说：

ts_calibrate
ts_test

哦哦知道了 buildroot里面可以选

WhyCan Forum(哇酷开发者社区)

楼主 #1 2020-04-01 15:47:37 分享评论

ns2009的驱动移植好了，点击屏幕的时候没反应 log里面显示....

#2 2020-04-01 15:53:02 分享评论

Re: ns2009的驱动移植好了，点击屏幕的时候没反应 log里面显示....

#3 2020-04-01 15:53:39 分享评论

Re: ns2009的驱动移植好了，点击屏幕的时候没反应 log里面显示....

楼主 #4 2020-04-01 16:33:44 分享评论

Re: ns2009的驱动移植好了，点击屏幕的时候没反应 log里面显示....

#5 2020-04-01 16:35:06 分享评论

Re: ns2009的驱动移植好了，点击屏幕的时候没反应 log里面显示....

楼主 #6 2020-04-01 17:18:20 分享评论

Re: ns2009的驱动移植好了，点击屏幕的时候没反应 log里面显示....

#7 2020-04-01 17:20:52 分享评论

Re: ns2009的驱动移植好了，点击屏幕的时候没反应 log里面显示....

楼主 #8 2020-04-01 17:59:28 分享评论

Re: ns2009的驱动移植好了，点击屏幕的时候没反应 log里面显示....

楼主 #9 2020-04-01 18:00:17 分享评论

Re: ns2009的驱动移植好了，点击屏幕的时候没反应 log里面显示....

页脚