楼主 #1 2018-09-03 10:46:29 分享评论
楼主 #2 2018-09-03 10:47:23 分享评论
楼主 #3 2018-09-03 10:48:43 分享评论
#4 2018-09-03 11:09:10 分享评论
- 达克罗德
- 会员
- 注册时间： 2018-04-10
- 已发帖子： 1,138
- 积分： 1090.5
Re: 买两片 W25M512JVFIQ 测试一下
多少钱？
离线
楼主 #5 2018-09-03 11:16:50 分享评论
楼主 #6 2018-09-03 11:17:23 分享评论
楼主 #7 2018-09-03 11:18:33 分享评论
楼主 #8 2018-09-03 11:19:27 分享评论
楼主 #9 2018-09-03 11:21:16 分享评论
楼主 #10 2018-09-03 16:37:00 分享评论
- 晕哥
- 管理员
- 注册时间： 2017-09-06
- 已发帖子： 9,350
- 积分： 9202
Re: 买两片 W25M512JVFIQ 测试一下
V3s u-boot 修改
licheepi/u-boot/drivers/mtd/spi/spi_flash_ids.c
添加一行:
{"w25m512jv", INFO(0xef7119, 0x0, 64 * 1024, 1024, RD_FULL | WR_QPP | SECT_4K) },
linux
licheepi/linux/drivers/mtd/devices/m25p80.c
添加
{"w25q80bl"}, {"w25q128"}, {"w25q256"}, {"w25m512jv"},
licheepi/linux/drivers/mtd/spi-nor/spi-nor.c
{ "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024, SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
改完之后重新编译烧录, 发现u-boot, Linux都可以启动，w25q256驱动不正常了:
[ 0.624277] m25p80 spi32766.0: unrecognized JEDEC id bytes: 00, 00, 00
[ 0.624352] m25p80: probe of spi32766.0 failed with error -2
离线
楼主 #11 2018-09-03 16:38:42 分享评论
- 晕哥
- 管理员
- 注册时间： 2017-09-06
- 已发帖子： 9,350
- 积分： 9202
Re: 买两片 W25M512JVFIQ 测试一下
经过 @assert 大神指点, 把 spi 时钟频率从 50Mhz 调整到 16Mhz,
识别flash正常了.
licheepi/linux/arch/arm/boot/dts/sun8i-v3s-sya.dts
&spi0 {
status ="okay";mx25l25635e:mx25l25635e@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-max-frequency = <16000000>;
#address-cells = <1>;
#size-cells = <1>;
};};
离线
楼主 #12 2018-09-03 18:36:36 分享评论
楼主 #13 2018-09-03 18:39:00 分享评论
- 晕哥
- 管理员
- 注册时间： 2017-09-06
- 已发帖子： 9,350
- 积分： 9202
Re: 买两片 W25M512JVFIQ 测试一下
找到一个 linux 下的 W25M512 的补丁
From c7025568f83800de384c457557169e44740dc8f7 Mon Sep 17 00:00:00 2001
From: "Anton D. Kachalov" <mouse@yandex-team.ru>
Date: Tue, 24 May 2016 19:36:35 +0300
Subject: [PATCH 06/14] Add various MTD SPI chips
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
---
drivers/mtd/spichips/Kconfig | 94 ++++
drivers/mtd/spichips/Makefile | 18 +
drivers/mtd/spichips/astspi.c | 367 +++++++++++++
drivers/mtd/spichips/atmel.c | 133 +++++
drivers/mtd/spichips/default.c | 106 ++++
drivers/mtd/spichips/generic.c | 1052 ++++++++++++++++++++++++++++++++++++++
drivers/mtd/spichips/intels33.c | 96 ++++
drivers/mtd/spichips/m25pxx.c | 121 +++++
drivers/mtd/spichips/macronix.c | 208 ++++++++
drivers/mtd/spichips/micron.c | 104 ++++
drivers/mtd/spichips/spansion.c | 103 ++++
drivers/mtd/spichips/spiaccess.c | 433 ++++++++++++++++
drivers/mtd/spichips/spiflash.h | 178 +++++++
drivers/mtd/spichips/spimtd.c | 241 +++++++++
drivers/mtd/spichips/spireg.c | 180 +++++++
drivers/mtd/spichips/winbond.c | 98 ++++
16 files changed, 3532 insertions(+)
create mode 100644 drivers/mtd/spichips/Kconfig
create mode 100644 drivers/mtd/spichips/Makefile
create mode 100644 drivers/mtd/spichips/astspi.c
create mode 100644 drivers/mtd/spichips/atmel.c
create mode 100644 drivers/mtd/spichips/default.c
create mode 100644 drivers/mtd/spichips/generic.c
create mode 100644 drivers/mtd/spichips/intels33.c
create mode 100644 drivers/mtd/spichips/m25pxx.c
create mode 100644 drivers/mtd/spichips/macronix.c
create mode 100644 drivers/mtd/spichips/micron.c
create mode 100644 drivers/mtd/spichips/spansion.c
create mode 100644 drivers/mtd/spichips/spiaccess.c
create mode 100644 drivers/mtd/spichips/spiflash.h
create mode 100644 drivers/mtd/spichips/spimtd.c
create mode 100644 drivers/mtd/spichips/spireg.c
create mode 100644 drivers/mtd/spichips/winbond.c
diff --git a/drivers/mtd/spichips/Kconfig b/drivers/mtd/spichips/Kconfig
new file mode 100644
index 0000000..c5e5a4c
--- /dev/null
+++ b/drivers/mtd/spichips/Kconfig
@@ -0,0 +1,94 @@
+# drivers/mtd/chips/Kconfig
+# $Id: Kconfig,v 1.18 2005/11/07 11:14:22 gleixner Exp $
+
+menu "SPI Flash chip drivers"
+ depends on MTD!=n
+
+config MTD_SPI
+ bool "Enable MTD support on SPI devices"
+ depends on MTD
+ help
+ Select this if you want to access SPI flash devices via MTD
+
+config MTD_SPI_SPANSION
+ bool "Spansion SPI devices Support"
+ depends on MTD_SPI
+ help
+ Select this if you want to use Spansion SPI devices
+
+config MTD_SPI_MACRONIX
+ bool "Macronix SPI devices Support"
+ depends on MTD_SPI
+ help
+ Select this if you want to use Macronix SPI devices
+
+config MTD_SPI_INTEL_S33
+ bool "Intel S33 SPI devices Support"
+ depends on MTD_SPI
+ help
+ Select this if you want to use Intel S33 SPI devices
+
+config MTD_SPI_WINBOND
+ bool "Winbond SPI devices Support"
+ depends on MTD_SPI
+ help
+ Select this if you want to use Winbond SPI devices
+
+config MTD_SPI_AT
+ bool "Atmel SPI devices Support"
+ depends on MTD_SPI
+ help
+ Select this if you want to use Atmel SPI devices
+
+config MTD_SPI_ST
+ bool "ST Micro SPI devices Support"
+ depends on MTD_SPI
+ help
+ Select this if you want to use ST Microelectronics SPI devices
+
+config MTD_SPI_NUMONYX
+ bool "Numonyx SPI devices Support"
+ depends on MTD_SPI
+ help
+ Select this if you want to use Numonyx SPI devices
+
+config MTD_SPI_MICRON
+ bool "Numonyx SPI devices Support"
+ depends on MTD_SPI
+ help
+ Select this if you want to use Micron SPI devices
+
+config MTD_SPI_DEFAULT
+ bool "Support for SPI Devices not supporting ReadID"
+ depends on MTD_SPI
+ help
+ Select this if the SPI device on your board does not SPI ReadID Command
+
+config DEFAULT_SPI_NAME
+ string "Default SPI Name"
+ depends on MTD_SPI && MTD_SPI_DEFAULT
+ default "default"
+ help
+ Name of the SPI Device that does not support ReadID
+
+config DEFAULT_SPI_SIZE
+ int "Default SPI Size in Bytes"
+ depends on MTD_SPI && MTD_SPI_DEFAULT
+ default "65536"
+ help
+ Chip Size of the SPI Device that does not support ReadID
+
+config DEFAULT_SPI_ERASE_SIZE
+ int "Default SPI Erase Block Size in Bytes"
+ depends on MTD_SPI && MTD_SPI_DEFAULT
+ default "65536"
+ help
+ Erase Block Size of the SPI Device that does not support ReadID
+
+config MTD_AST_SPI
+ bool "AST SOC SPI Flash Controller"
+ depends on MTD_SPI
+ help
+ If you are using SPI device on AST SOC, select Y
+
+endmenu
diff --git a/drivers/mtd/spichips/Makefile b/drivers/mtd/spichips/Makefile
new file mode 100644
index 0000000..b30a452
--- /dev/null
+++ b/drivers/mtd/spichips/Makefile
@@ -0,0 +1,18 @@
+#
+# linux/drivers/spichips/Makefile
+#
+obj-$(CONFIG_MTD_SPI) += spimtd.o spiaccess.o spireg.o generic.o
+
+obj-$(CONFIG_MTD_SPI_ST) += m25pxx.o
+obj-$(CONFIG_MTD_SPI_SPANSION) += spansion.o
+obj-$(CONFIG_MTD_SPI_MACRONIX) += macronix.o
+obj-$(CONFIG_MTD_SPI_AT) += atmel.o
+obj-$(CONFIG_MTD_SPI_INTEL_S33) += intels33.o
+obj-$(CONFIG_MTD_SPI_WINBOND) += winbond.o
+obj-$(CONFIG_MTD_SPI_MICRON) += micron.o
+obj-$(CONFIG_MTD_SPI_NUMONYX) += micron.o
+
+# The default driver should be the last in the list of suppported devices
+obj-$(CONFIG_MTD_SPI_DEFAULT) += default.o
+
+obj-$(CONFIG_MTD_AST_SPI) += astspi.o
diff --git a/drivers/mtd/spichips/astspi.c b/drivers/mtd/spichips/astspi.c
new file mode 100644
index 0000000..a0dc9d4
--- /dev/null
+++ b/drivers/mtd/spichips/astspi.c
@@ -0,0 +1,367 @@
+/*
+ * (C) Copyright 2009
+ * American Megatrends Inc.
+ *
+ * SPI flash controller driver for the AST SoC
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "spiflash.h"
+
+#define AST_FMC_REG_BASE AST_FMC_VA_BASE /* 0x1E620000 */
+#define AST_FMC_FLASH_CTRL_REG 0x00
+
+#define AST_FMC_CE0_CTRL_REG 0x10
+#define AST_FMC_CTRL_REG_SIZE 0x04
+
+#define AST_SPI_CMD_MASK 0x00FF0000 /* bit[23:16] */
+#define AST_SPI_CMD_SHIFT 16
+
+#define AST_SPI_CLOCK_MASK 0x00000F00 /* bit[11:8] */
+#define AST_SPI_CLOCK_SHIFT 8
+
+#define AST_SPI_DUMMY_MASK 0x000000C0 /* bit[7:6] */
+#define AST_SPI_DUMMY_0 0x00000000
+#define AST_SPI_DUMMY_1 0x00000040
+#define AST_SPI_DUMMY_2 0x00000080
+#define AST_SPI_DUMMY_3 0x000000C0
+
+#define AST_SPI_DATA_SINGLE 0x00000000
+#define AST_SPI_DATA_DUAL 0x00000008
+#define AST_SPI_DUAL_IO 0x00000002
+#define AST_SPI_FULL_DUAL_IO 0x00000003
+#define AST_SPI_DATA_MASK 7
+#define AST_SPI_DUAL_IO_SHIFT 28
+
+#define AST_SPI_CE_LOW 0x00000000
+#define AST_SPI_CE_HI 0x00000004
+
+#define AST_SPI_CMD_MODE_MASK 0x00000007 /* bit[2:0] */
+#define AST_SPI_CMD_MODE_NORMAL 0x00000000
+#define AST_SPI_CMD_MODE_FAST 0x00000001
+#define AST_SPI_CMD_MODE_WRITE 0x00000002
+#define AST_SPI_CMD_MODE_USER 0x00000003
+
+#define SPI_FAST_READ_CMD 0x0B
+#define SPI_DREAD_CMD 0x3B
+#define SPI_2READ_CMD 0xBB
+
+extern unsigned long ractrends_spiflash_flash_size[MAX_SPI_BANKS];
+static int *g_fast_read = 0;
+
+static void reset_flash(int bank)
+{
+ uint32_t reg;
+ uint32_t ctrl_reg;
+
+ // bank = 0,CE0 (0x10) ; bank = 1,CE1 (0x14) ; bank = 2,CE2 (0x18)
+ ctrl_reg = AST_FMC_CE0_CTRL_REG + (bank * AST_FMC_CTRL_REG_SIZE);
+
+ reg = ioread32((void __iomem *)AST_FMC_REG_BASE + ctrl_reg);
+ if (*g_fast_read == 3)//2xI/O Read
+ {
+ reg &= ~(AST_SPI_CMD_MASK | AST_SPI_DUMMY_MASK | AST_SPI_CMD_MODE_MASK);
+ reg |= (SPI_2READ_CMD << AST_SPI_CMD_SHIFT) | AST_SPI_DUMMY_1 | AST_SPI_CE_LOW | AST_SPI_CMD_MODE_FAST | (AST_SPI_FULL_DUAL_IO << AST_SPI_DUAL_IO_SHIFT);
+ }
+ else if (*g_fast_read == 2)//Dual Read
+ {
+ reg &= ~(AST_SPI_CMD_MASK | AST_SPI_DUMMY_MASK | AST_SPI_CMD_MODE_MASK);
+ reg |= (SPI_DREAD_CMD << AST_SPI_CMD_SHIFT) | AST_SPI_DUMMY_1 | AST_SPI_CE_LOW | AST_SPI_CMD_MODE_FAST | (AST_SPI_DUAL_IO << AST_SPI_DUAL_IO_SHIFT);
+ }
+ else if (*g_fast_read == 1)//Fast Read
+ {
+ reg &= ~(AST_SPI_CMD_MASK | AST_SPI_DUMMY_MASK | AST_SPI_CMD_MODE_MASK);
+ reg |= (SPI_FAST_READ_CMD << AST_SPI_CMD_SHIFT) | AST_SPI_DUMMY_1 | AST_SPI_CE_LOW | AST_SPI_CMD_MODE_FAST;
+ }
+ else
+ {
+ reg &= (~AST_SPI_CMD_MODE_MASK);
+ reg |= (AST_SPI_CE_LOW | AST_SPI_CMD_MODE_NORMAL);
+ }
+ iowrite32(reg, (void __iomem *)AST_FMC_REG_BASE + ctrl_reg);
+
+}
+
+static void reset_iomode (int bank)
+{
+ uint32_t reg;
+ uint32_t ctrl_reg;
+
+ // bank = 0,CE0 (0x10) ; bank = 1,CE1 (0x14) ; bank = 2,CE2 (0x18)
+ ctrl_reg = AST_FMC_CE0_CTRL_REG + (bank * AST_FMC_CTRL_REG_SIZE);
+
+ reg = ioread32((void __iomem *)AST_FMC_REG_BASE + ctrl_reg);
+ reg &= ~(AST_SPI_CMD_MASK | AST_SPI_DUMMY_MASK | (AST_SPI_DATA_MASK << AST_SPI_DUAL_IO_SHIFT));
+
+ if (*g_fast_read == 2)//Dual Read
+ reg |= (AST_SPI_DUAL_IO << AST_SPI_DUAL_IO_SHIFT);
+ else if (*g_fast_read == 3)//2xI/O Read
+ reg |= (AST_SPI_FULL_DUAL_IO << AST_SPI_DUAL_IO_SHIFT);
+
+ iowrite32(reg, (void __iomem *)AST_FMC_REG_BASE + ctrl_reg);
+
+ return;
+}
+
+static void chip_select_active(int bank)
+{
+ uint32_t reg;
+ uint32_t ctrl_reg;
+
+ // bank = 0,CE0 (0x10) ; bank = 1,CE1 (0x14) ; bank = 2,CE2 (0x18)
+ ctrl_reg = AST_FMC_CE0_CTRL_REG + (bank * AST_FMC_CTRL_REG_SIZE);
+
+ reg = ioread32((void __iomem *)AST_FMC_REG_BASE + ctrl_reg);
+ reg &= (~(AST_SPI_CMD_MODE_MASK | (AST_SPI_DATA_MASK << AST_SPI_DUAL_IO_SHIFT)) );
+ reg |= (AST_SPI_CE_LOW | AST_SPI_CMD_MODE_USER);
+ iowrite32(reg, (void __iomem *)AST_FMC_REG_BASE + ctrl_reg);
+}
+
+static void chip_select_deactive(int bank)
+{
+ uint32_t reg;
+ uint32_t ctrl_reg;
+
+ // bank = 0,CE0 (0x10) ; bank = 1,CE1 (0x14) ; bank = 2,CE2 (0x18)
+ ctrl_reg = AST_FMC_CE0_CTRL_REG + (bank * AST_FMC_CTRL_REG_SIZE);
+
+ reg = ioread32((void __iomem *)AST_FMC_REG_BASE + ctrl_reg);
+ reg &= (~(AST_SPI_CMD_MODE_MASK | (AST_SPI_DATA_MASK << AST_SPI_DUAL_IO_SHIFT)) );
+ reg |= (AST_SPI_CE_HI | AST_SPI_CMD_MODE_USER);
+ iowrite32(reg, (void __iomem *)AST_FMC_REG_BASE + ctrl_reg);
+}
+
+static int astspiflash_transfer(int bank, unsigned char *cmd, int cmdlen, SPI_DIR dir, unsigned char *data, unsigned long datalen)
+{
+ ulong base;
+ int i;
+ ulong offset = 0;
+
+ for(i = 0; i < bank; i++)
+ {
+ offset += ractrends_spiflash_flash_size[i];
+ }
+
+ base = AST_SPI_FLASH_VA_BASE + offset;
+
+ chip_select_active(bank);
+
+ if (cmd[0] == 0xBB)
+ {
+ *((volatile unsigned char *) base) = cmd[0];
+ reset_iomode(bank);
+ for (i = 1; i < cmdlen; i ++)
+ *((volatile unsigned char *) base) = cmd[i];
+ }
+ else if (cmd[0] == 0x3B)
+ {
+ for (i = 0; i < cmdlen; i ++)
+ *((volatile unsigned char *) base) = cmd[i];
+ reset_iomode(bank);
+ }
+ else
+ {
+ /* issue command */
+ for (i = 0; i < cmdlen; i ++)
+ *((volatile unsigned char *) base) = cmd[i];
+ }
+
+ if (dir == SPI_WRITE) {
+ /* write data to flash */
+ for (i = 0; i < datalen; i ++) {
+ *((volatile unsigned char *) base) = data[i];
+ }
+ } else if (dir == SPI_READ) {
+ /* read data from flash */
+ for (i = 0; i < datalen; i ++) {
+ data[i] = ((volatile unsigned char *) base)[i];
+ }
+ }
+
+ chip_select_deactive(bank);
+
+
+ reset_flash(bank);
+ return 0;
+}
+
+static const unsigned char clock_selection_table[] = {
+ 0x0F, /* 1 */
+ 0x07, /* 2 */
+ 0x0E, /* 3 */
+ 0x06, /* 4 */
+ 0x0D, /* 5 */
+ 0x05, /* 6 */
+ 0x0C, /* 7 */
+ 0x04, /* 8 */
+ 0x0B, /* 9 */
+ 0x03, /* 10 */
+ 0x0A, /* 11 */
+ 0x02, /* 12 */
+ 0x09, /* 13 */
+ 0x01, /* 14 */
+ 0x08, /* 15 */
+ 0x00, /* 16 */
+};
+
+static int astspiflash_configure_clock(int bank, unsigned int clock)
+{
+ uint32_t reg;
+ uint32_t cpu_clock;
+ uint32_t clock_divisor;
+ uint32_t ctrl_reg;
+#if defined(CONFIG_SOC_AST2500) || defined(CONFIG_SOC_AST2530)
+ uint32_t cpu_ratio;
+ uint32_t axi_ratio;
+#endif
+ // bank = 0,CE0 (0x10) ; bank = 1,CE1 (0x14) ; bank = 2,CE2 (0x18)
+ ctrl_reg = AST_FMC_CE0_CTRL_REG + (bank * AST_FMC_CTRL_REG_SIZE);
+
+ /* according to AST spec, clock of SPI controller can not exceed 50M Hz */
+ if (clock > (50 * 1000000))
+ clock = 50 * 1000000;
+
+ /* read CPU clock rate and CPU/AHB ratio from SCU */
+ reg = ioread32((void __iomem *)SCU_HW_STRAPPING_REG);
+
+ #if defined(CONFIG_SOC_AST2500) || defined(CONFIG_SOC_AST2530)
+ cpu_ratio = 2;
+
+ switch ((reg & 0x00000E00) >> 9) {
+ case 0x01:
+ axi_ratio = 2;
+ break;
+ case 0x02:
+ axi_ratio = 3;
+ break;
+ case 0x03:
+ axi_ratio = 4;
+ break;
+ case 0x04:
+ axi_ratio = 5;
+ break;
+ case 0x05:
+ axi_ratio = 6;
+ break;
+ case 0x06:
+ axi_ratio = 7;
+ break;
+ case 0x07:
+ axi_ratio = 8;
+ break;
+ default:
+ axi_ratio = 2;
+ break;
+ }
+
+ cpu_clock = 792 * 1000000;//Default H-PLL value
+ cpu_clock = cpu_clock / cpu_ratio / axi_ratio;
+ #else
+ switch ((reg & 0x00000300) >> 8) {
+ case 0x00:
+ cpu_clock = 384 * 1000000;
+ break;
+ case 0x01:
+ cpu_clock = 360 * 1000000;
+ break;
+ case 0x02:
+ cpu_clock = 336 * 1000000;
+ break;
+ case 0x03:
+ cpu_clock = 408 * 1000000;
+ break;
+ default:
+ cpu_clock = 408 * 1000000;
+ }
+
+ switch ((reg & 0x00000C00) >> 10) {
+ case 0x01:
+ cpu_clock /= 2;
+ break;
+ case 0x02:
+ cpu_clock /= 4;
+ break;
+ case 0x03:
+ cpu_clock /= 3;
+ break;
+ }
+ #endif
+
+ clock_divisor = 1;
+ while ((cpu_clock / clock_divisor) > clock) {
+ clock_divisor ++;
+ if (clock_divisor == 16)
+ break;
+ }
+
+ reg = ioread32((void __iomem *)AST_FMC_REG_BASE + ctrl_reg);
+ reg &= ~AST_SPI_CLOCK_MASK;
+ reg |= (clock_selection_table[clock_divisor - 1] << AST_SPI_CLOCK_SHIFT);
+ iowrite32(reg, (void __iomem *)AST_FMC_REG_BASE + ctrl_reg);
+
+ return 0;
+}
+
+struct spi_ctrl_driver astspi_driver = {
+ .name = "astspiflash",
+ .module = THIS_MODULE,
+ .max_read = (64 * 1024 * 1024), /* 32 MB */
+ #ifdef CONFIG_FLASH_OPERATION_MODE_MASK
+ .operation_mode_mask = CONFIG_FLASH_OPERATION_MODE_MASK,
+ #else
+ .operation_mode_mask = 0x00010003, //Default
+ #endif
+ .fast_read = 1,
+ .fast_write = 0,
+ .spi_transfer = astspiflash_transfer,
+ .spi_burst_read = astspiflash_transfer,
+ .spi_configure_clock = astspiflash_configure_clock,
+};
+
+static int astspi_init(void)
+{
+ sema_init(&astspi_driver.lock, 1);
+ register_spi_ctrl_driver(&astspi_driver);
+
+ g_fast_read = &astspi_driver.fast_read;
+
+ reset_flash(0); // CE0
+
+ reset_flash(1); // CE1
+
+ reset_flash(2); // CE2
+ #if !defined(CONFIG_SOC_AST2500) && !defined(CONFIG_SOC_AST2530)
+ reset_flash(3); // CE3
+ #endif
+
+ return 0;
+}
+
+static void astspi_exit(void)
+{
+ unregister_spi_ctrl_driver(&astspi_driver);
+}
+
+module_init(astspi_init);
+module_exit(astspi_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("AST SOC SPI flash controller driver");
diff --git a/drivers/mtd/spichips/atmel.c b/drivers/mtd/spichips/atmel.c
new file mode 100644
index 0000000..a7cfddb
--- /dev/null
+++ b/drivers/mtd/spichips/atmel.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifdef __UBOOT__
+#include <common.h>
+#endif
+#include "spiflash.h"
+#ifdef CFG_FLASH_SPI_DRIVER
+
+/* Name, ID1, ID2 , Size, Clock, Erase regions, address mode,{ Offset, Erase Size, Erase Block Count } */
+/* address mode: 0x00 -3 byte address
+ 0x01 - 4 byte address
+ 0x02 - Low byte: 3 byte address, High byte: 4 byte address*/
+static struct spi_flash_info atmel_data [] =
+{
+ /* Atmel 26F 64K Sectors */
+ { "Atmel at26f004" , 0x1F, 0x0004, 0x00010001, 0x100000 , 25 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 8 },} },
+
+ /* Atmel 25DF 64K Sectors */
+ { "Atmel at25df041a" , 0x1F, 0x0144, 0x00010001, 0x100000 , 70 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 8 },} },
+
+ /* Atmel 26DF 64K Sectors */
+ { "Atmel at26df081a" , 0x1F, 0x0145, 0x00010001, 0x100000 , 70 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 16 },} },
+ { "Atmel at26df161a" , 0x1F, 0x0146, 0x00010001, 0x200000 , 25 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 32 },} },
+ { "Atmel at26df161" , 0x1F, 0x0046, 0x00010001, 0x200000 , 25 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 32 },} },
+ { "Atmel at26df321" , 0x1F, 0x0047, 0x00010001, 0x400000 , 25 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 64 },} },
+ { "Atmel at25df321" , 0x1F, 0x0147, 0x00010001, 0x400000 , 85 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 64 },} },
+};
+
+
+static
+int
+atmel_probe(int bank,struct spi_ctrl_driver *ctrl_drv, struct spi_flash_info *chip_info)
+{
+ int retval;
+ unsigned char status;
+
+ retval = spi_generic_probe(bank, ctrl_drv,chip_info,"atmel",atmel_data,ARRAY_SIZE(atmel_data));
+ if (retval == -1)
+ return retval;
+
+ if (spi_generic_read_status(bank,ctrl_drv,&status) < 0)
+ {
+ printk("atmel: Read SR Failed.Cannot Unprotect all sectors\n");
+ return retval;
+ }
+
+ /* If SRPL = 1 (Bit 7)and WP/ = 0 (Bit 4), then it is hardware locked */
+ if ((status & 0x80) && (!(status & 0x10)))
+ {
+ printk("atmel: Hardware Locked\n");
+ return retval;
+ }
+
+ /* Check if already unprotected */
+ if ((status & 0xC) == 0)
+ return retval;
+
+ /* if SRPL is set, we have to disable SRPL before unprotect */
+ if (status & 0x80)
+ {
+ if (spi_generic_write_status(bank,ctrl_drv,status& 0x7F) < 0)
+ {
+ printk("atmel: Clearing SRPL failed .Cannot Unprotect all sectors\n");
+ return retval;
+ }
+ }
+
+ /* Unprotect all sectors */
+ if (spi_generic_write_status(bank,ctrl_drv,0x0) < 0)
+ printk("atmel: Unable to Unprotect all sectors\n");
+
+
+ return retval;
+}
+
+struct spi_chip_driver atmel_driver =
+{
+ .name = "atmel",
+ .module = THIS_MODULE,
+ .probe = atmel_probe,
+ .erase_sector = spi_generic_erase,
+ .read_bytes = spi_generic_read,
+ .write_bytes = spi_generic_write,
+ /* Atmel supports individual protect and unprotect of sectors */
+ /* if needed implement the functions and add here */
+};
+
+int
+atmel_init(void)
+{
+ sema_init(&atmel_driver.lock, 1);
+#ifdef __UBOOT__ /* MIPS */
+ atmel_driver.probe = atmel_probe;
+ atmel_driver.erase_sector = spi_generic_erase;
+ atmel_driver.read_bytes = spi_generic_read;
+ atmel_driver.write_bytes = spi_generic_write;
+#endif
+ register_spi_chip_driver(&atmel_driver);
+ return 0;
+}
+
+void
+atmel_exit(void)
+{
+ sema_init(&atmel_driver.lock, 1);
+ unregister_spi_chip_driver(&atmel_driver);
+ return;
+}
+
+module_init(atmel_init);
+module_exit(atmel_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("MTD SPI driver for Atmel flash chips");
+
+#endif
diff --git a/drivers/mtd/spichips/default.c b/drivers/mtd/spichips/default.c
new file mode 100644
index 0000000..93f31d7
--- /dev/null
+++ b/drivers/mtd/spichips/default.c
@@ -0,0 +1,106 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifdef __UBOOT__
+#include <common.h>
+#endif
+#include "spiflash.h"
+#ifdef CFG_FLASH_SPI_DRIVER
+
+#ifndef CONFIG_DEFAULT_SPI_NAME
+#define CONFIG_DEFAULT_SPI_NAME "Unknown SPI Device"
+#endif
+
+#ifndef CONFIG_DEFAULT_SPI_SIZE
+#define CONFIG_DEFAULT_SPI_SIZE 0
+#endif
+
+#ifndef CONFIG_DEFAULT_SPI_CLOCK
+#define CONFIG_DEFAULT_SPI_CLOCK (25 * 1000000)
+#endif
+
+#ifndef CONFIG_DEFAULT_SPI_ERASE_SIZE
+#define CONFIG_DEFAULT_SPI_ERASE_SIZE (64 *1024)
+#endif
+
+
+/* This driver is called at end when all probe failed. Some chips don't support read id
+ commands and user can provide the information here */
+
+/* Name, ID1, ID2 , Size, Clock, Erase regions, address mode,{ Offset, Erase Size, Erase Block Count } */
+/* address mode: 0x00 -3 byte address
+ 0x01 - 4 byte address
+ 0x02 - Low byte: 3 byte address, High byte: 4 byte address*/
+static struct spi_flash_info default_data [] =
+{
+ { CONFIG_DEFAULT_SPI_NAME , 0xFF, 0x0FFFF, 0x00010001, CONFIG_DEFAULT_SPI_SIZE , CONFIG_DEFAULT_SPI_CLOCK, 1, 0x00,
+ {{ 0, CONFIG_DEFAULT_SPI_ERASE_SIZE, CONFIG_DEFAULT_SPI_SIZE/CONFIG_DEFAULT_SPI_ERASE_SIZE },} },
+};
+
+static
+int
+default_probe(int bank,struct spi_ctrl_driver *ctrl_drv, struct spi_flash_info *chip_info)
+{
+ memcpy(chip_info,&default_data[0],sizeof(struct spi_flash_info));
+
+ if (spi_generic_write_status(bank,ctrl_drv,0x0) < 0)
+ printk("%s: Unable to Unprotect all sectors\n",CONFIG_DEFAULT_SPI_NAME);
+ return 0;
+}
+
+struct spi_chip_driver default_driver =
+{
+ .name = "default",
+ .module = THIS_MODULE,
+ .probe = default_probe,
+ .erase_sector = spi_generic_erase,
+ .read_bytes = spi_generic_read,
+ .write_bytes = spi_generic_write,
+};
+
+int
+default_init(void)
+{
+ sema_init(&default_driver.lock, 1);
+#ifdef __UBOOT__ /* MIPS */
+ default_driver.probe = default_probe;
+ default_driver.erase_sector = spi_generic_erase;
+ default_driver.read_bytes = spi_generic_read;
+ default_driver.write_bytes = spi_generic_write;
+#endif
+ register_spi_chip_driver(&default_driver);
+ return 0;
+}
+
+void
+default_exit(void)
+{
+ sema_init(&default_driver.lock, 1);
+ unregister_spi_chip_driver(&default_driver);
+ return;
+}
+
+module_init(default_init);
+module_exit(default_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("MTD SPI driver for Default flash chips");
+
+#endif
diff --git a/drivers/mtd/spichips/generic.c b/drivers/mtd/spichips/generic.c
new file mode 100644
index 0000000..50a70f6
--- /dev/null
+++ b/drivers/mtd/spichips/generic.c
@@ -0,0 +1,1052 @@
+/*
+ * Copyright (C) 2007-2013 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifdef __UBOOT__
+#include <common.h>
+#endif
+#include "spiflash.h"
+#ifdef CFG_FLASH_SPI_DRIVER
+
+/* Flash opcodes. */
+#define OPCODE_WREN 0x06 /* Write enable */
+#define OPCODE_WRDI 0x04 /* Write disable*/
+#define OPCODE_RDID 0x9F /* Read JEDEC ID */
+#define OPCODE_RDSR 0x05 /* Read status register */
+#define OPCODE_WRSR 0x01 /* Write status register */
+#define OPCODE_READ 0x03 /* Read data bytes */
+#define OPCODE_FAST_READ 0x0B /* Read Fast read */
+#define OPCODE_DREAD 0x3B /* Dual Read Mode */
+#define OPCODE_2READ 0xBB /* 2 x I/O Read Mode */
+#define OPCODE_PP 0x02 /* Page program */
+#define OPCODE_SE 0xD8 /* Sector erase */
+#define OPCODE_DP 0xB9 /* Deep Power Down */
+#define OPCODE_RES 0xAB /* Read Electronic Signature */
+
+/* Status Register bits. */
+#define SR_WIP 0x01 /* Write in progress */
+#define SR_WEL 0x02 /* Write enable latch */
+#define SR_BP0 0x04 /* Block protect 0 */
+#define SR_BP1 0x08 /* Block protect 1 */
+#define SR_BP2 0x10 /* Block protect 2 */
+#define SR_SRWD 0x80 /* SR write protect */
+
+#define PROGRAM_PAGE_SIZE 256 /* Max Program Size */
+
+#define ADDR_16MB 0x1000000
+#define CMD_MX25XX_EN4B 0xb7 /* Enter 4-byte address mode */
+#define CMD_MX25XX_EX4B 0xe9 /* Exit 4-byte address mode */
+
+
+#define ADDRESS_3BYTE 0x00
+#define ADDRESS_4BYTE 0x01
+#define ADDRESS_LO3_HI4_BYTE 0x02
+
+#define ADDRESS_DIE_LO3_HI4_BYTE 0x06
+#define ADDR_32MB 0x2000000
+#define CMD_WX25XX_CS 0xc2 /* Die select */
+
+extern unsigned long ractrends_spiflash_flash_id[MAX_SPI_BANKS];
+
+static int wait_till_ready(int bank,struct spi_ctrl_driver *ctrl_drv);
+
+static
+int inline
+spi_error(int retval)
+{
+ printk("SPI Chip %s (%d) : Error (%d)\n",__FILE__,__LINE__,retval);
+ return retval;
+}
+
+static int
+spi_generic_read_flag_status(int bank, struct spi_ctrl_driver *ctrl_drv,unsigned char *status)
+{
+ int retval;
+ u8 code = 0x70;
+
+ /* Issue Controller Transfer Routine */
+ retval = ctrl_drv->spi_transfer(bank,&code, 1,SPI_READ,status, 1);
+
+ if (retval < 0)
+ return spi_error(retval);
+
+ return 0;
+}
+
+
+
+int
+spi_generic_read_status(int bank, struct spi_ctrl_driver *ctrl_drv,unsigned char *status)
+{
+ int retval;
+ u8 code = OPCODE_RDSR;
+
+ /* Issue Controller Transfer Routine */
+ retval = ctrl_drv->spi_transfer(bank,&code, 1,SPI_READ,status, 1);
+
+ if (retval < 0)
+ return spi_error(retval);
+
+ return 0;
+}
+
+int
+spi_generic_write_status(int bank,struct spi_ctrl_driver *ctrl_drv, unsigned char status)
+{
+ int retval;
+ u8 code = OPCODE_WRSR;
+
+ /* Send write enable */
+ spi_generic_write_enable(bank,ctrl_drv);
+
+ /* Issue Controller Transfer Routine */
+ retval = ctrl_drv->spi_transfer(bank,&code, 1,SPI_WRITE,&status, 1);
+ if (retval < 0)
+ return spi_error(retval);
+
+ return 0;
+}
+
+
+int
+spi_generic_write_enable(int bank,struct spi_ctrl_driver *ctrl_drv)
+{
+ u8 code = OPCODE_WREN;
+ int retval;
+
+ /* Issue Controller Transfer Routine */
+ retval = ctrl_drv->spi_transfer(bank,&code, 1,SPI_NONE, NULL, 0);
+ if (retval < 0)
+ return spi_error(retval);
+ return 0;
+}
+
+int
+spi_generic_write_disable(int bank, struct spi_ctrl_driver *ctrl_drv)
+{
+ u8 code = OPCODE_WRDI;
+ int retval;
+
+ /* Issue Controller Transfer Routine */
+ retval = ctrl_drv->spi_transfer(bank,&code, 1,SPI_NONE, NULL, 0);
+ if (retval < 0)
+ return spi_error(retval);
+ return 0;
+}
+
+int spi_generic_select_die(int bank, u8 die_num, struct spi_ctrl_driver *ctrl_drv)
+{
+ int retval;
+ u8 command[2];
+
+ command[0] = CMD_WX25XX_CS;
+ command[1] = die_num;
+
+ /* Wait until finished previous command. */
+ if (wait_till_ready(bank,ctrl_drv))
+ {
+ return -1;
+ }
+
+ retval = ctrl_drv->spi_transfer(bank, command, 2, SPI_NONE, NULL, 0);
+
+ if (retval < 0)
+ {
+ printk ("Could not select die.\n");
+ return spi_error(retval);
+ }
+ return 0;
+}
+
+int enter_4byte_addr_mode(int bank, struct spi_ctrl_driver *ctrl_drv)
+{
+ //enable 32 MB Address mode
+ u8 code = CMD_MX25XX_EN4B;
+ int retval;
+
+ //printf("<ENTER> 4 BYTE\n");
+ /* Wait until finished previous command. */
+ if (wait_till_ready(bank,ctrl_drv))
+ {
+ return -1;
+ }
+
+
+ /* Issue Controller Transfer Routine */
+ if ((ractrends_spiflash_flash_id[bank] == 0x002019BA) || (ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA))
+ spi_generic_write_enable(bank,ctrl_drv);
+ retval = ctrl_drv->spi_transfer(bank, &code, 1, SPI_NONE, NULL, 0);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002019BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA))
+ spi_generic_write_disable(bank,ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Could not Enter into 4-byte address mode\n");
+ return spi_error(retval);
+ }
+ return 0;
+}
+
+int exit_4byte_addr_mode(int bank, struct spi_ctrl_driver *ctrl_drv)
+{
+ //Disable 32 MB Address mode
+ u8 code = CMD_MX25XX_EX4B;
+ int retval;
+
+ //printf("<EXIT> 4 BYTE\n");
+ /* Wait until finished previous command. */
+ if (wait_till_ready(bank,ctrl_drv))
+ {
+ return -1;
+ }
+
+
+ /* Issue Controller Transfer Routine */
+ if ((ractrends_spiflash_flash_id[bank] == 0x002019BA) || (ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA))
+ spi_generic_write_enable(bank,ctrl_drv);
+ retval = ctrl_drv->spi_transfer(bank, &code, 1, SPI_NONE, NULL, 0);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002019BA) || (ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA))
+ spi_generic_write_disable(bank,ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Could not Exit from 4-byte address mode\n");
+ return spi_error(retval);
+ }
+ return 0;
+}
+
+int spi_generic_extended_address(int bank, SPI_DIR dir, u8 addr, struct spi_ctrl_driver *ctrl_drv)
+{
+ int retval;
+
+ if (dir == SPI_READ)
+ {
+ u8 code = 0xC8;
+ u8 reg_data;
+
+ ctrl_drv->spi_transfer(bank, &code, 1, SPI_READ, ®_data, 1);
+ retval = (int) reg_data;
+ }
+ else if (dir == SPI_WRITE)
+ {
+ u8 command[2];
+
+ command[0] = 0xC5;
+ command[1] = addr;
+ spi_generic_write_enable(bank, ctrl_drv);
+ ctrl_drv->spi_transfer(bank, command, 2, SPI_NONE, NULL, 0);
+ spi_generic_write_disable(bank, ctrl_drv);
+ retval = command[1];
+ }
+ else // SPI_NONE
+ {
+ retval = 0;
+ }
+
+ return retval;
+}
+
+// the function just for WINBOND W25Q256 only, always revise the extended address to the defalut
+int w25q256_force_extended_address(int bank, struct spi_ctrl_driver *ctrl_drv)
+{
+ int retval;
+ u8 code;
+ u8 reg_data;
+ u8 command[5];
+
+ code = 0xC8; // "Read Extended Address Register"
+ retval = ctrl_drv->spi_transfer(bank, &code, 1, SPI_READ, ®_data, 1);
+ if (reg_data == 0x01)
+ {
+ spi_generic_write_enable(bank,ctrl_drv);
+ command[0] = 0xC5; // "Write Extended Address Register" with the force address 0x00
+ command[1] = command[2] = command[3] = command[4] = 0x00;
+ retval = ctrl_drv->spi_transfer(bank, command, 5, SPI_NONE, NULL, 0);
+ spi_generic_write_disable(bank,ctrl_drv);
+ }
+ return 0;
+}
+
+/* Define max times to check status register before we give up. */
+#define MAX_READY_WAIT_COUNT 4000000
+
+static int
+wait_till_ready(int bank,struct spi_ctrl_driver *ctrl_drv)
+{
+ unsigned long count;
+ unsigned char sr;
+
+ for (count = 0; count < MAX_READY_WAIT_COUNT; count++)
+ {
+ if (spi_generic_read_status(bank,ctrl_drv,&sr) < 0)
+ {
+ printk("Error reading SPI Status Register\n");
+ break;
+ }
+ else
+ {
+ if (!(sr & SR_WIP))
+ return 0;
+ }
+ }
+
+ printk("spi_generic: Waiting for Ready Failed\n");
+ return 1;
+}
+
+static int
+require_read_flag_status(int bank,struct spi_ctrl_driver *ctrl_drv)
+{
+ unsigned long count;
+ unsigned char sr;
+
+ for (count = 0; count < MAX_READY_WAIT_COUNT; count++)
+ {
+ if (spi_generic_read_flag_status(bank,ctrl_drv,&sr) < 0)
+ {
+ printk("Error reading SPI Status Register\n");
+ break;
+ }
+ else
+ {
+ if (sr & SR_SRWD)
+ return 0;
+ }
+ }
+
+ printk("spi_generic %s() : Waiting for Ready Failed\n", __func__);
+ return 1;
+}
+
+
+
+int
+spi_generic_erase(struct map_info *map, unsigned long sect_addr)
+{
+ struct spi_flash_private *priv=map->fldrv_priv;
+ int bank = map->map_priv_1;
+ struct spi_ctrl_driver *ctrl_drv = priv->ctrl_drv;
+ int retval;
+ unsigned char command[5];
+ int cmd_size;
+ u8 address32 = priv->address32;
+ //unsigned long flash_size = priv->size;
+ u8 had_switch_die = 0;
+ u8 pwr_up_mode = 0;
+
+ down(&priv->chip_drv->lock);
+
+
+ /* Wait until finished previous command. */
+ if (wait_till_ready(bank,ctrl_drv))
+ {
+ up(&priv->chip_drv->lock);
+ return -1;
+ }
+
+ if (address32 == ADDRESS_DIE_LO3_HI4_BYTE) {
+ if(sect_addr>=ADDR_32MB){
+ spi_generic_select_die( bank, 1,ctrl_drv);
+ had_switch_die = 1;
+ sect_addr-=ADDR_32MB;
+ }
+ }
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940)
+ {
+ u8 reg_data;
+
+ command[0] = 0x15; /* Read Status Register S23 ~ S16 */
+ cmd_size = 1;
+ retval = ctrl_drv->spi_transfer(bank,command, cmd_size ,SPI_READ, ®_data, 1);
+ pwr_up_mode = (reg_data & 0x2)>>1; /* S17(ADP) field */
+ }
+
+ /* Logic for 4 byte address mode Enter */
+ if ( ((sect_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE )||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || pwr_up_mode)
+ {
+ retval = enter_4byte_addr_mode(bank, ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Unable to enter 4 byte address mode\n");
+ if(had_switch_die == 1)
+ {
+ spi_generic_select_die( bank, 0,ctrl_drv);
+ }
+ up(&priv->chip_drv->lock);
+ return spi_error(retval);
+ }
+ }
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940) w25q256_force_extended_address(bank, ctrl_drv);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA) || (ractrends_spiflash_flash_id[bank] == 0x00C21A20))
+ spi_generic_extended_address(bank, SPI_WRITE, (sect_addr & 0xFF000000) >> 24, ctrl_drv);
+
+ if ( (((sect_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || (address32 == ADDRESS_4BYTE)) || pwr_up_mode)
+ {
+ /* Set up command buffer. */
+ command[0] = OPCODE_SE;
+ if (ractrends_spiflash_flash_id[bank] == 0x00011902) command[0] = 0xDC; // ERASE command in 4byte mode [spansion only]
+ if (address32 == ADDRESS_DIE_LO3_HI4_BYTE) command[0] = 0xDC; // ERASE command in 4byte mode
+ command[1] = sect_addr >> 24;
+ command[2] = sect_addr >> 16;
+ command[3] = sect_addr >> 8;
+ command[4] = sect_addr;
+
+ cmd_size = 5;
+ }
+ else {
+ /* Set up command buffer. */
+ command[0] = OPCODE_SE;
+ command[1] = sect_addr >> 16;
+ command[2] = sect_addr >> 8;
+ command[3] = sect_addr;
+
+ cmd_size = 4;
+ }
+
+ /* Issue Controller Transfer Routine */
+ spi_generic_write_enable(bank,ctrl_drv); /* Send write enable */
+ retval = ctrl_drv->spi_transfer(bank,command, cmd_size ,SPI_NONE, NULL, 0);
+ spi_generic_write_disable(bank,ctrl_drv); /* Send write disable */
+
+ if (ractrends_spiflash_flash_id[bank] == 0x002020BA || ractrends_spiflash_flash_id[bank] == 0x002021BA)
+ {
+ /* requires the read flag status with at latest one byte. */
+ if (require_read_flag_status(bank,ctrl_drv))
+ {
+ up(&priv->chip_drv->lock);
+ return -1;
+ }
+ }
+
+ if (retval < 0)
+ {
+ //if 4 byte mode exit
+ if ( ((sect_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || pwr_up_mode)
+ {
+ retval = exit_4byte_addr_mode(bank, ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Unable to exit 4 byte address mode\n");
+ }
+ }
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940) w25q256_force_extended_address(bank, ctrl_drv);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA) || (ractrends_spiflash_flash_id[bank] == 0x00C21A20))
+ spi_generic_extended_address(bank, SPI_WRITE, 0x00, ctrl_drv);
+
+ if(had_switch_die == 1)
+ {
+ spi_generic_select_die( bank, 0,ctrl_drv);
+ }
+ up(&priv->chip_drv->lock);
+ return spi_error(retval);
+ }
+
+ if ( ((sect_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || pwr_up_mode)
+ {
+ retval = exit_4byte_addr_mode(bank, ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Unable to exit 4 byte address mode\n");
+ }
+ }
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940) w25q256_force_extended_address(bank, ctrl_drv);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA) || (ractrends_spiflash_flash_id[bank] == 0x00C21A20))
+ spi_generic_extended_address(bank, SPI_WRITE, 0x00, ctrl_drv);
+
+ if(had_switch_die == 1)
+ {
+ spi_generic_select_die( bank, 0,ctrl_drv);
+ }
+ up(&priv->chip_drv->lock);
+ return retval;
+}
+
+
+int
+spi_generic_read(struct map_info *map, loff_t addr, size_t bytes, unsigned char *buff)
+{
+ struct spi_flash_private *priv=map->fldrv_priv;
+ int bank = map->map_priv_1;
+ struct spi_ctrl_driver *ctrl_drv = priv->ctrl_drv;
+ int retval = 0;
+ size_t transfer;
+ unsigned char command[6];
+ int cmd_size;
+ int (*readfn)(int bank,unsigned char *,int , SPI_DIR, unsigned char *, unsigned long); //unsigned long);
+ int end_addr = (addr+bytes-1);
+ u8 address32 = priv->address32;
+ //unsigned long flash_size = priv->size;
+ u8 had_switch_die = 0;
+ u8 pwr_up_mode = 0;
+
+ /* Some time zero bytes length are sent */
+ if (bytes==0)
+ return 0;
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940)
+ {
+ u8 reg_data;
+
+ command[0] = 0x15; /* Read Status Register S23 ~ S16 */
+ cmd_size = 1;
+ retval = ctrl_drv->spi_transfer(bank,command, cmd_size ,SPI_READ, ®_data, 1);
+ pwr_up_mode = (reg_data & 0x2)>>1; /* S17(ADP) field */
+ }
+
+ if (address32 == ADDRESS_DIE_LO3_HI4_BYTE)
+ {
+ if (addr < ADDR_32MB && end_addr >= ADDR_32MB)
+ {
+ int ErrorCode;
+ transfer = (ADDR_32MB - addr);
+ ErrorCode = spi_generic_read(map, addr, transfer, buff);
+ if (ErrorCode != 0) return ErrorCode;
+
+ //fix address
+ bytes-=transfer;
+ addr+=transfer;
+ buff+=transfer;
+
+ end_addr = (addr+bytes-1);
+ if (bytes==0) return 0;
+ }
+ }
+ down(&priv->chip_drv->lock);
+
+
+
+ /* Wait until finished previous command. */
+ if (wait_till_ready(bank,ctrl_drv))
+ {
+ up(&priv->chip_drv->lock);
+ return -1;
+ }
+
+ if (address32 == ADDRESS_DIE_LO3_HI4_BYTE){
+ if(addr >= ADDR_32MB){
+ spi_generic_select_die( bank, 1,ctrl_drv);
+ had_switch_die = 1;
+ addr-=ADDR_32MB;
+ end_addr = (addr+bytes-1);
+ }
+ }
+
+ if (ctrl_drv->spi_burst_read)
+ readfn = ctrl_drv->spi_burst_read;
+ else
+ readfn = ctrl_drv->spi_transfer;
+
+ transfer=bytes;
+
+
+ /* Logic for 4 byte address mode Enter */
+ if ( (( end_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE )||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || pwr_up_mode)
+ {
+ //printk ("Trying to enter 4 byte mode\n");
+ retval = enter_4byte_addr_mode(bank, ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Unable to enter 4 byte address mode\n");
+ if(had_switch_die == 1)
+ {
+ spi_generic_select_die( bank, 0,ctrl_drv);
+ }
+ up(&priv->chip_drv->lock);
+ return spi_error(retval);
+ }
+ }
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940) w25q256_force_extended_address(bank, ctrl_drv);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA) || (ractrends_spiflash_flash_id[bank] == 0x00C21A20))
+ spi_generic_extended_address(bank, SPI_WRITE, (addr & 0xFF000000) >> 24, ctrl_drv);
+
+ while (bytes)
+ {
+ if (ctrl_drv->spi_burst_read)
+ transfer=bytes;
+ else
+ {
+ transfer=ctrl_drv->max_read;
+ if (transfer > bytes)
+ transfer = bytes;
+ }
+
+ if (!ctrl_drv->fast_read)
+ {
+ if ( ((( end_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || (address32 == ADDRESS_4BYTE)) || pwr_up_mode )
+ {
+ /* Set up command buffer. */ /* Normal Read */
+ command[0] = OPCODE_READ;
+ if (ractrends_spiflash_flash_id[bank] == 0x00011902) command[0] = 0x13; // READ command in 4byte mode [spansion only]
+ if (address32 == ADDRESS_DIE_LO3_HI4_BYTE) command[0] = 0x13; // READ command in 4byte mode
+ command[1] = addr >> 24;
+ command[2] = addr >> 16;
+ command[3] = addr >> 8;
+ command[4] = addr;
+
+ cmd_size = 5;
+ }
+ else {
+
+ /* Set up command buffer. */ /* Normal Read */
+ command[0] = OPCODE_READ;
+ command[1] = addr >> 16;
+ command[2] = addr >> 8;
+ command[3] = addr;
+
+ cmd_size = 4;
+ }
+ /* Issue Controller Transfer Routine */
+ retval = (*readfn)(bank,command, cmd_size ,SPI_READ, buff, (unsigned long)transfer);
+ }
+ else if (ctrl_drv->fast_read == 1) // Need to check Fast Read in 4 byte address mode
+ {
+ if ( ((( end_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || (address32 == ADDRESS_4BYTE)) || pwr_up_mode )
+ {
+ /* Set up command buffer. */ /* Fast Read */
+ command[0] = OPCODE_FAST_READ;
+ if (ractrends_spiflash_flash_id[bank] == 0x00011902) command[0] = 0x0C; // FAST_READ command in 4byte mode [spansion only]
+ if (address32 == ADDRESS_DIE_LO3_HI4_BYTE) command[0] = 0x0C; // FAST_READ command in 4byte mode
+ command[1] = addr >> 24;
+ command[2] = addr >> 16;
+ command[3] = addr >> 8;
+ command[4] = addr;
+ command[5] = 0; /* dummy data */
+
+ cmd_size = 6;
+ }
+ else
+ {
+ /* Set up command buffer. */ /* Fast Read */
+ command[0] = OPCODE_FAST_READ;
+ command[1] = addr >> 16;
+ command[2] = addr >> 8;
+ command[3] = addr;
+ command[4] = 0; /* dummy data */
+
+ cmd_size = 5;
+ }
+ /* Issue Controller Transfer Routine */
+ retval = (*readfn)(bank,command, cmd_size ,SPI_READ, buff, (unsigned long)transfer);
+ }
+ else if (ctrl_drv->fast_read == 2) // Need to check Dual Read in 4 byte address mode
+ {
+ if ( ((( end_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || (address32 == ADDRESS_4BYTE)) || pwr_up_mode )
+ {
+ /* Set up command buffer. */ /* Dual Read */
+ command[0] = OPCODE_DREAD;
+ command[1] = addr >> 24;
+ command[2] = addr >> 16;
+ command[3] = addr >> 8;
+ command[4] = addr;
+ command[5] = 0; /* dummy data */
+
+ cmd_size = 6;
+ }
+ else
+ {
+ /* Set up command buffer. */ /* Dual Read */
+ command[0] = OPCODE_DREAD;
+ command[1] = addr >> 16;
+ command[2] = addr >> 8;
+ command[3] = addr;
+ command[4] = 0; /* dummy data */
+
+ cmd_size = 5;
+ }
+ /* Issue Controller Transfer Routine */
+ retval = (*readfn)(bank,command, cmd_size ,SPI_READ, buff, (unsigned long)transfer);
+ }
+ else if (ctrl_drv->fast_read == 3) // Need to check 2xI/O Read in 4 byte address mode
+ {
+ if ( ((( end_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || (address32 == ADDRESS_4BYTE)) || pwr_up_mode )
+ {
+ /* Set up command buffer. */ /* 2xI/O Read */
+ command[0] = OPCODE_2READ;
+ command[1] = addr >> 24;
+ command[2] = addr >> 16;
+ command[3] = addr >> 8;
+ command[4] = addr;
+ command[5] = 0; /* dummy data */
+
+ cmd_size = 6;
+ }
+ else
+ {
+ /* Set up command buffer. */ /* 2xI/O Read */
+ command[0] = OPCODE_2READ;
+ command[1] = addr >> 16;
+ command[2] = addr >> 8;
+ command[3] = addr;
+ command[4] = 0; /* dummy data */
+
+ cmd_size = 5;
+ }
+ /* Issue Controller Transfer Routine */
+ retval = (*readfn)(bank,command, cmd_size ,SPI_READ, buff, (unsigned long)transfer);
+ }
+
+ if (retval < 0)
+ {
+ //if 4 byte mode, exit
+ if ( (( end_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || pwr_up_mode)
+ {
+ retval = exit_4byte_addr_mode(bank, ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Unable to exit 4 byte address mode\n");
+ }
+ }
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940) w25q256_force_extended_address(bank, ctrl_drv);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA) || (ractrends_spiflash_flash_id[bank] == 0x00C21A20))
+ spi_generic_extended_address(bank, SPI_WRITE, 0x00, ctrl_drv);
+
+ if(had_switch_die == 1)
+ {
+ spi_generic_select_die( bank, 0,ctrl_drv);
+ }
+ up(&priv->chip_drv->lock);
+ return spi_error(retval);
+ }
+
+ bytes-=transfer;
+ addr+=transfer;
+ buff+=transfer;
+ }
+
+ //if 4 byte mode exit
+ if ( (( end_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || pwr_up_mode)
+ {
+ //printk ("Trying to exit 4 byte mode\n");
+ retval = exit_4byte_addr_mode(bank, ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Unable to exit 4 byte address mode\n");
+ }
+ }
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940) w25q256_force_extended_address(bank, ctrl_drv);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA) || (ractrends_spiflash_flash_id[bank] == 0x00C21A20))
+ spi_generic_extended_address(bank, SPI_WRITE, 0x00, ctrl_drv);
+
+ if(had_switch_die == 1)
+ {
+ spi_generic_select_die( bank, 0,ctrl_drv);
+ }
+ up(&priv->chip_drv->lock);
+ return 0;
+}
+
+
+int
+spi_generic_write(struct map_info *map, loff_t addr, size_t bytes, const unsigned char *buff)
+{
+ struct spi_flash_private *priv=map->fldrv_priv;
+ int bank = map->map_priv_1;
+ struct spi_ctrl_driver *ctrl_drv = priv->ctrl_drv;
+
+ int retval;
+ unsigned char command[5];
+ size_t transfer;
+ int cmd_size = 0;
+ int end_addr = (addr+bytes-1);
+ u8 address32 = priv->address32;
+ //unsigned long flash_size = priv->size;
+ u8 had_switch_die = 0;
+ u8 pwr_up_mode = 0;
+
+ /* Some time zero bytes length are sent */
+ if (bytes==0)
+ return 0;
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940)
+ {
+ u8 reg_data;
+
+ command[0] = 0x15; /* Read Status Register S23 ~ S16 */
+ cmd_size = 1;
+ retval = ctrl_drv->spi_transfer(bank,command, cmd_size ,SPI_READ, ®_data, 1);
+ pwr_up_mode = (reg_data & 0x2)>>1; /* S17(ADP) field */
+ }
+
+ if (address32 == ADDRESS_DIE_LO3_HI4_BYTE)
+ {
+ if (addr < ADDR_32MB && end_addr >= ADDR_32MB)
+ {
+ int ErrorCode;
+ transfer = (ADDR_32MB - addr);
+ ErrorCode = spi_generic_write(map, addr, transfer, buff);
+ if (ErrorCode != 0) return ErrorCode;
+
+ //fix address
+ bytes-=transfer;
+ addr+=transfer;
+ buff+=transfer;
+
+ end_addr = (addr+bytes-1);
+ if (bytes==0) return 0;
+ }
+ }
+
+ down(&priv->chip_drv->lock);
+
+ if (address32 == ADDRESS_DIE_LO3_HI4_BYTE){
+ if(addr >= ADDR_32MB){
+ spi_generic_select_die( bank, 1,ctrl_drv);
+ had_switch_die = 1;
+ addr-=ADDR_32MB;
+ end_addr = (addr+bytes-1);
+ }
+ }
+
+ /* Logic for 4 byte address mode Enter */
+ if ( (( end_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || pwr_up_mode)
+ {
+ retval = enter_4byte_addr_mode(bank, ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Unable to enter 4 byte address mode\n");
+ if(had_switch_die == 1)
+ {
+ spi_generic_select_die( bank, 0,ctrl_drv);
+ }
+ up(&priv->chip_drv->lock);
+ return spi_error(retval);
+ }
+ }
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940) w25q256_force_extended_address(bank, ctrl_drv);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA) || (ractrends_spiflash_flash_id[bank] == 0x00C21A20))
+ spi_generic_extended_address(bank, SPI_WRITE, (addr & 0xFF000000) >> 24, ctrl_drv);
+
+ while (bytes)
+ {
+ /* Wait until finished previous command. */
+ if (wait_till_ready(bank,ctrl_drv))
+ {
+ if(had_switch_die == 1)
+ {
+ spi_generic_select_die( bank, 0,ctrl_drv);
+ }
+ up(&priv->chip_drv->lock);
+ return -1;
+ }
+
+ transfer = PROGRAM_PAGE_SIZE;
+ if (bytes < transfer)
+ transfer = bytes;
+
+ if (!ctrl_drv->fast_write)
+ {
+ if ( (((end_addr >= ADDR_16MB) && (address32 == ADDRESS_LO3_HI4_BYTE)) || (address32 == ADDRESS_4BYTE)) || pwr_up_mode)
+ {
+ /* Set up command buffer. */
+ command[0] = OPCODE_PP;
+ if (ractrends_spiflash_flash_id[bank] == 0x00011902) command[0] = 0x12; // PROGRAM command in 4byte mode [spansion only]
+ if (address32 == ADDRESS_DIE_LO3_HI4_BYTE) command[0] = 0x12; // PROGRAM command in 4byte mode
+ command[1] = addr >> 24;
+ command[2] = addr >> 16;
+ command[3] = addr >> 8;
+ command[4] = addr;
+ cmd_size = 5;
+ }
+ else {
+ /* Set up command buffer. */
+ command[0] = OPCODE_PP;
+ command[1] = addr >> 16;
+ command[2] = addr >> 8;
+ command[3] = addr;
+ cmd_size = 4;
+ }
+ }
+
+ /* Issue Controller Transfer Routine */
+ spi_generic_write_enable(bank,ctrl_drv); /* Send write enable */
+ retval = ctrl_drv->spi_transfer(bank,command,cmd_size ,SPI_WRITE,
+ (unsigned char *)buff, transfer);
+ spi_generic_write_disable(bank,ctrl_drv); /* Send write disable */
+
+ if (ractrends_spiflash_flash_id[bank] == 0x002020BA || ractrends_spiflash_flash_id[bank] == 0x002021BA)
+ {
+ /* requires the read flag status with at latest one byte. */
+ if (require_read_flag_status(bank,ctrl_drv))
+ {
+ up(&priv->chip_drv->lock);
+ return -1;
+ }
+ }
+
+ if (retval < 0)
+ {
+ //if 4 byte mode exit
+ if ( (( end_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || pwr_up_mode)
+ {
+ retval = exit_4byte_addr_mode(bank, ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Unable to exit 4 byte address mode\n");
+ }
+ }
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940) w25q256_force_extended_address(bank, ctrl_drv);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA) || (ractrends_spiflash_flash_id[bank] == 0x00C21A20))
+ spi_generic_extended_address(bank, SPI_WRITE, 0x00, ctrl_drv);
+
+ if(had_switch_die == 1)
+ {
+ spi_generic_select_die( bank, 0,ctrl_drv);
+ }
+ up(&priv->chip_drv->lock);
+ return spi_error(retval);
+ }
+ addr+=(transfer-retval);
+ buff+=(transfer-retval);
+ bytes-=(transfer-retval);
+ }
+
+ //if 4 byte mode exit
+ if ( (( end_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || pwr_up_mode)
+ {
+ retval = exit_4byte_addr_mode(bank, ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Unable to exit 4 byte address mode\n");
+ }
+ }
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940) w25q256_force_extended_address(bank, ctrl_drv);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA) || (ractrends_spiflash_flash_id[bank] == 0x00C21A20))
+ spi_generic_extended_address(bank, SPI_WRITE, 0x00, ctrl_drv);
+
+ if(had_switch_die == 1)
+ {
+ spi_generic_select_die( bank, 0,ctrl_drv);
+ }
+ up(&priv->chip_drv->lock);
+ return 0;
+}
+
+/***********************************************************************************/
+extern int spi_verbose;
+int
+spi_generic_probe(int bank,struct spi_ctrl_driver *ctrl_drv, struct spi_flash_info *chip_info,
+ char *spi_name,struct spi_flash_info *spi_list, int spi_list_len)
+{
+ int retval;
+ u32 val;
+ int i;
+ u16 opread;
+ u16 opwrite;
+ u8 code = OPCODE_RDID;
+ //int address_mode = 0;
+
+ if (spi_verbose == 2)
+ printk("SPI: probing for %s devices ...\n",spi_name);
+
+ /* Send write enable */
+ retval =spi_generic_write_enable(bank,ctrl_drv);
+ if (retval < 0)
+ return -1;
+
+ /* Issue Controller Transfer Routine */
+ val = 0;
+ retval = ctrl_drv->spi_transfer(bank,&code, 1,SPI_READ,(unsigned char *)&val, 3);
+ val &= 0x00FFFFFF;
+
+ if (retval < 0)
+ {
+ spi_error(retval);
+ return -1;
+ }
+
+ /* Send write disable */
+ retval = spi_generic_write_disable(bank,ctrl_drv);
+ if (retval < 0)
+ return -1;
+
+ /* Match the ID against the table entries */
+ for (i = 0; i < spi_list_len; i++)
+ {
+ if ((spi_list[i].mfr_id == ((val)& 0xFF)) && (spi_list[i].dev_id == ((val >> 8)& 0xFFFF)))
+ {
+ /* Check Operation Mode */
+ //for Read Operation
+ opread = (spi_list[i].operationmode & 0xFFFF);
+ opread &= ctrl_drv->operation_mode_mask;
+ if (opread > 0x7)
+ {
+ ctrl_drv->fast_read = 3;
+ }
+ else if ((0x3 < opread) && (opread <= 0x7))
+ {
+ ctrl_drv->fast_read = 2;
+ }
+ else if ((0x1 < opread) && (opread <= 0x3))
+ {
+ ctrl_drv->fast_read = 1;
+ }
+ else if (opread <= 0x1)
+ {
+ ctrl_drv->fast_read = 0;
+ }
+
+ //for Write Operation
+ opwrite = (spi_list[i].operationmode >> 16);
+ opwrite &= (ctrl_drv->operation_mode_mask >> 16);
+ if (opwrite <= 0x1)
+ {
+ ctrl_drv->fast_write = 0;
+ }
+
+ break;
+ }
+ }
+
+ if (i == spi_list_len)
+ {
+// if (spi_verbose == 2)
+// printk("%s : Unrecognized ID (0x%x) got \n",spi_name,val);
+ return -1;
+ }
+ memcpy(chip_info,&spi_list[i],sizeof(struct spi_flash_info));
+
+ if (spi_verbose > 0)
+ printk(KERN_INFO"Found SPI Chip %s \n",spi_list[i].name);
+
+ return 0;
+
+}
+
+EXPORT_SYMBOL(spi_generic_probe);
+EXPORT_SYMBOL(spi_generic_erase);
+EXPORT_SYMBOL(spi_generic_read);
+EXPORT_SYMBOL(spi_generic_write);
+EXPORT_SYMBOL(spi_generic_write_disable);
+EXPORT_SYMBOL(spi_generic_write_enable);
+EXPORT_SYMBOL(spi_generic_read_status);
+EXPORT_SYMBOL(spi_generic_write_status);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("MTD SPI driver for Generic SPI flash chips");
+
+#endif
diff --git a/drivers/mtd/spichips/intels33.c b/drivers/mtd/spichips/intels33.c
new file mode 100644
index 0000000..6900319
--- /dev/null
+++ b/drivers/mtd/spichips/intels33.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifdef __UBOOT__
+#include <common.h>
+#endif
+#include "spiflash.h"
+#ifdef CFG_FLASH_SPI_DRIVER
+
+/* Name, ID1, ID2 , Size, Clock, Erase regions, address mode,{ Offset, Erase Size, Erase Block Count } */
+/* address mode: 0x00 -3 byte address
+ 0x01 - 4 byte address
+ 0x02 - Low byte: 3 byte address, High byte: 4 byte address*/
+static struct spi_flash_info s33_data [] =
+{
+ /* Intel S33 64 K Sectors */
+ { "Intel S33 16Mb" , 0x89, 0x1189, 0x00010001, 0x200000 , 68 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 32 },} },
+ { "Intel S33 32Mb" , 0x89, 0x1289, 0x00010001, 0x400000 , 68 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 64 },} },
+ { "Intel S33 64Mb" , 0x89, 0x1389, 0x00010001, 0x800000 , 68 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 128 },} },
+};
+
+
+static
+int
+s33_probe(int bank,struct spi_ctrl_driver *ctrl_drv, struct spi_flash_info *chip_info)
+{
+ int retval;
+ retval = spi_generic_probe(bank,ctrl_drv,chip_info,"intel s33",
+ s33_data,ARRAY_SIZE(s33_data));
+
+ if (retval == -1)
+ return retval;
+
+ /* UnProctect all sectors */
+ /* SRWD=0 (Bit 7) BP0,BP1,BP2 = 0 (Bit 2,3,4) */
+ if (spi_generic_write_status(bank,ctrl_drv,0x0) < 0)
+ printk("intel s33: Unable to Unprotect all sectors\n");
+ return retval;
+}
+
+struct spi_chip_driver s33_driver =
+{
+ .name = "intel s33",
+ .module = THIS_MODULE,
+ .probe = s33_probe,
+ .erase_sector = spi_generic_erase,
+ .read_bytes = spi_generic_read,
+ .write_bytes = spi_generic_write,
+};
+
+int
+s33_init(void)
+{
+ sema_init(&s33_driver.lock, 1);
+#ifdef __UBOOT__ /* MIPS */
+ s33_driver.probe = s33_probe;
+ s33_driver.erase_sector = spi_generic_erase;
+ s33_driver.read_bytes = spi_generic_read;
+ s33_driver.write_bytes = spi_generic_write;
+#endif
+ register_spi_chip_driver(&s33_driver);
+ return 0;
+}
+
+void
+s33_exit(void)
+{
+ sema_init(&s33_driver.lock, 1);
+ unregister_spi_chip_driver(&s33_driver);
+ return;
+}
+
+module_init(s33_init);
+module_exit(s33_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("MTD SPI driver for Intel S33 flash chips");
+
+#endif
diff --git a/drivers/mtd/spichips/m25pxx.c b/drivers/mtd/spichips/m25pxx.c
new file mode 100644
index 0000000..448fe06
--- /dev/null
+++ b/drivers/mtd/spichips/m25pxx.c
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifdef __UBOOT__
+#include <common.h>
+#endif
+#include "spiflash.h"
+#ifdef CFG_FLASH_SPI_DRIVER
+
+/* Name, ID1, ID2 , Size, Clock, Erase regions, address mode,{ Offset, Erase Size, Erase Block Count } */
+/* address mode: 0x00 -3 byte address
+ 0x01 - 4 byte address
+ 0x02 - Low byte: 3 byte address, High byte: 4 byte address*/
+static struct spi_flash_info m25pxx_data [] =
+{
+ /* ST Micro 32K Sectors */
+ { "ST Micro m25p05A" , 0x20, 0x1020, 0x00010001, 0x010000 , 50 * 1000000, 1, 0x00, {{ 0, 32 * 1024, 2 },} },
+ { "ST Micro m25p10A" , 0x20, 0x1120, 0x00010001, 0x020000 , 50 * 1000000, 1, 0x00, {{ 0, 32 * 1024, 4 },} },
+
+ /* ST Micro 64 K Sectors */
+ { "ST Micro m25p20" , 0x20, 0x1220, 0x00010001, 0x040000 , 75 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 4 },} },
+ { "ST Micro m25p40" , 0x20, 0x1320, 0x00010001, 0x080000 , 75 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 8 },} },
+ { "ST Micro m25p80" , 0x20, 0x1420, 0x00010001, 0x100000 , 75 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 16 },} },
+ { "ST Micro m25p16" , 0x20, 0x1520, 0x00010001, 0x200000 , 75 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 32 },} },
+ { "ST Micro m25p32" , 0x20, 0x1620, 0x00010001, 0x400000 , 75 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 64 },} },
+ { "ST Micro m25p64" , 0x20, 0x1720, 0x00010001, 0x800000 , 75 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 128 },} },
+ { "ST Micro m25px64" , 0x20, 0x1771, 0x00010001, 0x800000 , 75 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 128 },} },
+
+ /* ST Micro 256K Sectors */
+ { "ST Micro m25p128" , 0x20, 0x1820, 0x00010001, 0x1000000, 50 * 1000000, 1, 0x00, {{ 0, 256 * 1024, 64 },} },
+
+ /* ST Micro 64 K Sectors, 25MHz speed */
+ { "ST Micro m45p20" , 0x20, 0x1240, 0x00010001, 0x040000 , 25 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 4 },} },
+ { "ST Micro m45p40" , 0x20, 0x1340, 0x00010001, 0x080000 , 25 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 8 },} },
+ { "ST Micro m45p80" , 0x20, 0x1440, 0x00010001, 0x100000 , 25 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 16 },} },
+ { "ST Micro m45p16" , 0x20, 0x1540, 0x00010001, 0x200000 , 25 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 32 },} },
+ { "ST Micro m45p32" , 0x20, 0x1640, 0x00010001, 0x400000 , 25 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 64 },} },
+ { "ST Micro m45p64" , 0x20, 0x1740, 0x00010001, 0x800000 , 25 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 128 },} },
+
+};
+
+
+static
+int
+m25pxx_probe(int bank,struct spi_ctrl_driver *ctrl_drv, struct spi_flash_info *chip_info)
+{
+ int retval;
+ retval = spi_generic_probe(bank,ctrl_drv,chip_info,"m25pxx",
+ m25pxx_data,ARRAY_SIZE(m25pxx_data));
+
+ if (retval == -1)
+ return retval;
+
+ /* UnProctect all sectors */
+ /* SRWD=0 (Bit 7) BP0,BP1,BP2 = 0 (Bit 2,3,4) */
+ if (spi_generic_write_status(bank,ctrl_drv,0x0) < 0)
+ printk("m25pxx: Unable to Unprotect all sectors\n");
+
+ return retval;
+}
+
+struct spi_chip_driver m25pxx_driver =
+{
+ .name = "m25pxx",
+ .module = THIS_MODULE,
+ .probe = m25pxx_probe,
+ .erase_sector = spi_generic_erase,
+ .read_bytes = spi_generic_read,
+ .write_bytes = spi_generic_write,
+};
+
+
+
+int
+m25pxx_init(void)
+{
+ sema_init(&m25pxx_driver.lock, 1);
+#ifdef __UBOOT__ /* MIPS */
+ m25pxx_driver.probe = m25pxx_probe;
+ m25pxx_driver.erase_sector = spi_generic_erase;
+ m25pxx_driver.read_bytes = spi_generic_read;
+ m25pxx_driver.write_bytes = spi_generic_write;
+#endif
+ register_spi_chip_driver(&m25pxx_driver);
+ return 0;
+}
+
+
+void
+m25pxx_exit(void)
+{
+ sema_init(&m25pxx_driver.lock, 1);
+ unregister_spi_chip_driver(&m25pxx_driver);
+ return;
+}
+
+
+module_init(m25pxx_init);
+module_exit(m25pxx_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("MTD SPI driver for ST M25Pxx flash chips");
+
+#endif
diff --git a/drivers/mtd/spichips/macronix.c b/drivers/mtd/spichips/macronix.c
new file mode 100644
index 0000000..176d101
--- /dev/null
+++ b/drivers/mtd/spichips/macronix.c
@@ -0,0 +1,208 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifdef __UBOOT__
+#include <common.h>
+#endif
+#include "spiflash.h"
+#ifdef CFG_FLASH_SPI_DRIVER
+
+#define CMD_MX25XX_RDSCUR 0x2B /* Read security register */
+#define CMD_MX25XX_RDCR 0x15 /* Read configuration register */
+
+/* Security register */
+#define SCUR_BIT2 0x04
+
+/* Configuration register */
+#define CR_BIT5 0x20
+
+#define ADDRESS_3BYTE 0x00
+#define ADDRESS_4BYTE 0x01
+#define ADDRESS_LO3_HI4_BYTE 0x02
+#define MX25L25x35E_MFR_ID 0xC2
+#define MX25L25x35E_DEV_ID 0x1920
+
+
+/* Name, ID1, ID2 , Size, Clock, Erase regions, address mode,{ Offset, Erase Size, Erase Block Count } */
+/* address mode: 0x00 -3 byte address
+ 0x01 - 4 byte address
+ 0x02 - Low byte: 3 byte address, High byte: 4 byte address*/
+static struct spi_flash_info macronix_data [] =
+{
+ /* Macronix 64 K Sectors */
+ { "Macronix MX25L1605D" , 0xC2, 0x1520, 0x0001000B, 0x200000 , 66 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 32 },} },
+ { "Macronix MX25L3205D" , 0xC2, 0x1620, 0x0001000B, 0x400000 , 66 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 64 },} },
+ { "Macronix MX25L6405D" , 0xC2, 0x1720, 0x0001000B, 0x800000 , 66 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 128 },} },
+ { "Macronix MX25L12805D", 0xC2, 0x1820, 0x00010001, 0x1000000, 50 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 256 },} },
+ { "Macronix MX25L25635E", 0xC2, 0x1920, 0x0001000F, 0x2000000, 50 * 1000000, 1, 0x02, {{ 0, 64 * 1024, 512 },} },
+ { "Macronix MX25L25735E", 0xC2, 0x1920, 0x0001000F, 0x2000000, 50 * 1000000, 1, 0x01, {{ 0, 64 * 1024, 512 },} },
+ { "Macronix MX66L51235F", 0xC2, 0x1A20, 0x0001000F, 0x4000000, 50 * 1000000, 1, 0x02, {{ 0, 64 * 1024, 1024 },} },
+ { "EON EN25QH256", 0x1C, 0x1970, 0x0001000F, 0x2000000, 50 * 1000000, 1, 0x02, {{ 0, 64 * 1024, 512 },} },
+
+};
+
+/* to dinstinguish between MX25L25635/MX25L25735 E and F type */
+static int read_security_register(int bank, struct spi_ctrl_driver *ctrl_drv)
+{
+ u8 code = CMD_MX25XX_RDSCUR;
+ int retval;
+ unsigned char scur_reg;
+
+ /* Issue Controller Transfer Routine*/
+ retval = ctrl_drv->spi_transfer(bank,&code, 1,SPI_READ,&scur_reg, 1);
+ if (retval < 0)
+ {
+ printk ("Could not read security register\n");
+ return -1;
+
+ }
+
+ /* 0x00 - 3 byte mode
+ 0x04 - 4 byte mode */
+ scur_reg &= SCUR_BIT2;
+
+ if(scur_reg == 0x04)
+ return ADDRESS_4BYTE; // MX25L25735E
+ else
+ return ADDRESS_LO3_HI4_BYTE; // MX25L25635E, MX25L25635F, MX25L25735F
+
+ return 0;
+}
+
+/* to dinstinguish MX25L25635/MX25L25735 F type */
+static int read_configuration_register(int bank, struct spi_ctrl_driver *ctrl_drv)
+{
+ u8 code = CMD_MX25XX_RDCR;
+ int retval;
+ unsigned char conf_reg;
+
+ /* Issue Controller Transfer Routine */
+ retval = ctrl_drv->spi_transfer(bank,&code,1,SPI_READ,&conf_reg,1);
+ if (retval < 0)
+ {
+ printk ("Could not read configuration register\n");
+ return -1;
+ }
+
+ if (conf_reg == 0xFF) conf_reg = 0x00; // invalid value (maybe unsupported the RDCR command)
+
+ /* 0x00 - 3 byte mode
+ 0x20 - 4 byte mode */
+ conf_reg &= CR_BIT5;
+
+ if(conf_reg == CR_BIT5)
+ return ADDRESS_4BYTE; // MX25L25735F
+ else
+ return ADDRESS_LO3_HI4_BYTE; // MX25L25635E or MX25L25635F
+
+ return 0;
+}
+
+static
+int
+macronix_probe(int bank,struct spi_ctrl_driver *ctrl_drv, struct spi_flash_info *chip_info)
+{
+ int retval;
+ int address_mode = 0;
+ int i=0;
+
+ retval = spi_generic_probe(bank,ctrl_drv,chip_info,"macronix",
+ macronix_data,ARRAY_SIZE(macronix_data));
+
+ if (retval == -1)
+ return retval;
+
+ /* MX25L25635E, MX25L25735E, MX25L25635F, MX25L25735F - the same ID code */
+ if((chip_info->mfr_id == MX25L25x35E_MFR_ID) && (chip_info->dev_id == MX25L25x35E_DEV_ID))
+ {
+ address_mode = read_security_register(bank, ctrl_drv);
+ if (address_mode == ADDRESS_LO3_HI4_BYTE) address_mode = read_configuration_register(bank, ctrl_drv);
+
+ if (address_mode == -1)
+ return address_mode;
+
+ if(chip_info->address32 != address_mode)
+ {
+ memset(chip_info,0,sizeof(struct spi_flash_info));
+ for (i = 0; i < (ARRAY_SIZE(macronix_data)); i++)
+ {
+ if((macronix_data[i].mfr_id == MX25L25x35E_MFR_ID) && (macronix_data[i].dev_id == MX25L25x35E_DEV_ID))
+ {
+ if(macronix_data[i].address32 == address_mode)
+ {
+
+ break;
+ }
+ }
+
+ }
+ memcpy(chip_info,¯onix_data[i],sizeof(struct spi_flash_info));
+
+ }
+
+ }
+
+ /* UnProctect all sectors */
+ /* SRWD=0 (Bit 7) BP0,BP1,BP2 = 0 (Bit 2,3,4) */
+ if (spi_generic_write_status(bank,ctrl_drv,0x0) < 0)
+ printk("macronix: Unable to Unprotect all sectors\n");
+
+ return retval;
+}
+
+struct spi_chip_driver macronix_driver =
+{
+ .name = "macronix",
+ .module = THIS_MODULE,
+ .probe = macronix_probe,
+ .erase_sector = spi_generic_erase,
+ .read_bytes = spi_generic_read,
+ .write_bytes = spi_generic_write,
+};
+
+int
+macronix_init(void)
+{
+ sema_init(¯onix_driver.lock, 1);
+#ifdef __UBOOT__ /* MIPS */
+ macronix_driver.probe = macronix_probe;
+ macronix_driver.erase_sector = spi_generic_erase;
+ macronix_driver.read_bytes = spi_generic_read;
+ macronix_driver.write_bytes = spi_generic_write;
+#endif
+ register_spi_chip_driver(¯onix_driver);
+ return 0;
+}
+
+void
+macronix_exit(void)
+{
+ sema_init(¯onix_driver.lock, 1);
+ unregister_spi_chip_driver(¯onix_driver);
+ return;
+}
+
+module_init(macronix_init);
+module_exit(macronix_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("MTD SPI driver for Macronix flash chips");
+
+#endif
diff --git a/drivers/mtd/spichips/micron.c b/drivers/mtd/spichips/micron.c
new file mode 100644
index 0000000..e9f44ab
--- /dev/null
+++ b/drivers/mtd/spichips/micron.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2007-2013 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifdef __UBOOT__
+#include <common.h>
+#endif
+#include "spiflash.h"
+#ifdef CFG_FLASH_SPI_DRIVER
+
+/* Name, ID1, ID2 , Size, Clock, Erase regions, address mode, { Offset, Erase Size, Erase Block Count } */
+/* address mode: 0x00 -3 byte address
+ 0x01 - 4 byte address
+ 0x02 - Low byte: 3 byte address, High byte: 4 byte address*/
+
+static struct spi_flash_info micron_data [] =
+{
+ /* Micron 64 K Sectors */
+ { "Micron/Numonyx N25Q00A" , 0x20, 0x21BA, 0x00010001, 0x8000000 , 108 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 2048 },} },
+ { "Micron/Numonyx N25Q512A" , 0x20, 0x20BA, 0x00010001, 0x4000000 , 108 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 1024 },} },
+ { "Micron/Numonyx N25Q256A" , 0x20, 0x19BA, 0x00010001, 0x2000000 , 108 * 1000000, 1, 0x02, {{ 0, 64 * 1024, 512 },} },
+ { "Micron/Numonyx n25q128" , 0x20, 0x18BA, 0x00010001, 0x1000000, 50 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 256 },} },
+};
+
+
+static
+int
+micron_probe(int bank,struct spi_ctrl_driver *ctrl_drv, struct spi_flash_info *chip_info)
+{
+ int retval;
+
+ retval = spi_generic_probe(bank,ctrl_drv,chip_info,"micron",
+ micron_data,ARRAY_SIZE(micron_data));
+
+ if (retval == -1)
+ return retval;
+
+ /* UnProctect all sectors */
+ /* SRWD=0 (Bit 7) BP0,BP1,BP2 = 0 (Bit 2,3,4) */
+ if (spi_generic_write_status(bank,ctrl_drv,0x0) < 0)
+ printk("micron: Unable to Unprotect all sectors\n");
+
+ return retval;
+}
+
+struct spi_chip_driver micron_driver =
+{
+ .name = "micron",
+ .module = THIS_MODULE,
+ .probe = micron_probe,
+ .erase_sector = spi_generic_erase,
+ .read_bytes = spi_generic_read,
+ .write_bytes = spi_generic_write,
+};
+
+
+
+int
+micron_init(void)
+{
+ sema_init(µn_driver.lock,1);
+#ifdef __UBOOT__ /* MIPS */
+ micron_driver.probe = micron_probe;
+ micron_driver.erase_sector = spi_generic_erase;
+ micron_driver.read_bytes = spi_generic_read;
+ micron_driver.write_bytes = spi_generic_write;
+#endif
+ register_spi_chip_driver(µn_driver);
+ return 0;
+}
+
+
+void
+micron_exit(void)
+{
+ sema_init(µn_driver.lock,1);
+ unregister_spi_chip_driver(µn_driver);
+ return;
+}
+
+
+module_init(micron_init);
+module_exit(micron_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("MTD SPI driver for micron flash chips");
+
+#endif
diff --git a/drivers/mtd/spichips/spansion.c b/drivers/mtd/spichips/spansion.c
new file mode 100644
index 0000000..33a7bca
--- /dev/null
+++ b/drivers/mtd/spichips/spansion.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifdef __UBOOT__
+#include <common.h>
+#endif
+#include "spiflash.h"
+#ifdef CFG_FLASH_SPI_DRIVER
+
+/* Name, ID1, ID2 , Size, Clock, Erase regions, address mode,{ Offset, Erase Size, Erase Block Count } */
+/* address mode: 0x00 -3 byte address
+ 0x01 - 4 byte address
+ 0x02 - Low byte: 3 byte address, High byte: 4 byte address*/
+
+static struct spi_flash_info spansion_data [] =
+{
+ /* Spansion 64 K Sectors */
+ { "Spansion S25FL064A" , 0x01, 0x1602, 0x00010001, 0x800000 , 104 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 128 },} },
+ { "Spansion S25FL128P" , 0x01, 0x1820, 0x00010001, 0x1000000 , 104 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 256 },} },
+ { "Spansion S25FL256S" , 0x01, 0x1902, 0x00010001, 0x2000000 , 104 * 1000000, 1, 0x02, {{ 0, 64 * 1024, 512 },} },
+
+};
+
+
+static
+int
+spansion_probe(int bank,struct spi_ctrl_driver *ctrl_drv, struct spi_flash_info *chip_info)
+{
+ int retval;
+ retval = spi_generic_probe(bank,ctrl_drv,chip_info,"spansion",
+ spansion_data,ARRAY_SIZE(spansion_data));
+
+ if (retval == -1)
+ return retval;
+
+ /* UnProctect all sectors */
+ /* SRWD=0 (Bit 7) BP0,BP1,BP2 = 0 (Bit 2,3,4) */
+ if (spi_generic_write_status(bank,ctrl_drv,0x0) < 0)
+ printk("spansion: Unable to Unprotect all sectors\n");
+
+ return retval;
+}
+
+struct spi_chip_driver spansion_driver =
+{
+ .name = "spansion",
+ .module = THIS_MODULE,
+ .probe = spansion_probe,
+ .erase_sector = spi_generic_erase,
+ .read_bytes = spi_generic_read,
+ .write_bytes = spi_generic_write,
+};
+
+
+
+int
+spansion_init(void)
+{
+ sema_init(&spansion_driver.lock, 1);
+#ifdef __UBOOT__ /* MIPS */
+ spansion_driver.probe = spansion_probe;
+ spansion_driver.erase_sector = spi_generic_erase;
+ spansion_driver.read_bytes = spi_generic_read;
+ spansion_driver.write_bytes = spi_generic_write;
+#endif
+ register_spi_chip_driver(&spansion_driver);
+ return 0;
+}
+
+
+void
+spansion_exit(void)
+{
+ sema_init(&spansion_driver.lock, 1);
+ unregister_spi_chip_driver(&spansion_driver);
+ return;
+}
+
+
+module_init(spansion_init);
+module_exit(spansion_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("MTD SPI driver for Spansion flash chips");
+
+#endif
diff --git a/drivers/mtd/spichips/spiaccess.c b/drivers/mtd/spichips/spiaccess.c
new file mode 100644
index 0000000..5412f72
--- /dev/null
+++ b/drivers/mtd/spichips/spiaccess.c
@@ -0,0 +1,433 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "spiflash.h"
+
+int spi_verbose = 1;
+
+
+/*----------------------------------------------------------------------------------*/
+/* Low level functions which finally talk to the chip driver */
+/*----------------------------------------------------------------------------------*/
+static void inline
+chip_unlock_sector(struct map_info *map, unsigned long sect_addr,int unlock)
+{
+ struct spi_flash_private *priv=map->fldrv_priv;
+
+ if (!priv->chip_drv->unlock_sector)
+ return;
+ (*priv->chip_drv->unlock_sector)(map,sect_addr,unlock);
+ return;
+}
+
+static int inline
+chip_is_sector_locked(struct map_info *map, unsigned long sect_addr)
+{
+ struct spi_flash_private *priv=map->fldrv_priv;
+
+ if (!priv->chip_drv->is_sector_locked)
+ return 0;
+ return (*priv->chip_drv->is_sector_locked)(map,sect_addr);
+}
+
+static int inline
+chip_read_bytes(struct map_info *map, loff_t addr, size_t bytes, unsigned char *buf)
+{
+ struct spi_flash_private *priv=map->fldrv_priv;
+
+ if (!priv->chip_drv->read_bytes)
+ return -1;
+ return (*priv->chip_drv->read_bytes)(map,addr,bytes,buf);
+}
+
+static int inline
+chip_write_bytes(struct map_info *map, loff_t addr, size_t bytes, const unsigned char *buf)
+{
+ struct spi_flash_private *priv=map->fldrv_priv;
+
+ if (!priv->chip_drv->write_bytes)
+ return -1;
+ return (*priv->chip_drv->write_bytes)(map,addr,bytes,buf);
+}
+
+static int inline
+chip_erase_sector(struct map_info *map, unsigned long sect_addr)
+{
+ struct spi_flash_private *priv=map->fldrv_priv;
+
+ if (!priv->chip_drv->erase_sector)
+ return -1;
+ return (*priv->chip_drv->erase_sector)(map,sect_addr);
+}
+
+
+void
+spi_flash_sync(struct mtd_info *mtd)
+{
+ struct map_info *map = mtd->priv;
+ struct spi_flash_private *priv = map->fldrv_priv;
+
+ if (!priv->chip_drv->sync)
+ return;
+ (*priv->chip_drv->sync)(map);
+ return;
+}
+
+int
+spi_flash_suspend(struct mtd_info *mtd)
+{
+ struct map_info *map = mtd->priv;
+ struct spi_flash_private *priv = map->fldrv_priv;
+
+ if (!priv->chip_drv->suspend)
+ return -EINVAL;
+ return (*priv->chip_drv->suspend)(map);
+}
+
+void
+spi_flash_resume(struct mtd_info *mtd)
+{
+ struct map_info *map = mtd->priv;
+ struct spi_flash_private *priv = map->fldrv_priv;
+
+ if (!priv->chip_drv->resume)
+ return;
+ (*priv->chip_drv->resume)(map);
+ return;
+}
+
+
+/*----------------------------------------------------------------------------------*/
+/* Intermediate Functions which interfaces mtd functionss to chip driver fucntions */
+/*----------------------------------------------------------------------------------*/
+static int
+spi_flash_do_unlock(struct mtd_info *mtd, loff_t ofs, uint32_t len,
+ int is_unlock)
+{
+ struct map_info *map;
+ struct mtd_erase_region_info *merip;
+ int eraseoffset, erasesize, eraseblocks;
+ int i;
+ int retval = 0;
+ int lock_status;
+
+ map = mtd->priv;
+
+ /* Pass the whole chip through sector by sector and check for each
+ sector if the sector and the given interval overlap */
+ for(i = 0; i < mtd->numeraseregions; i++)
+ {
+ merip = &mtd->eraseregions[i];
+
+ eraseoffset = merip->offset;
+ erasesize = merip->erasesize;
+ eraseblocks = merip->numblocks;
+
+ if (ofs > eraseoffset + erasesize)
+ continue;
+
+ while (eraseblocks > 0)
+ {
+ if (ofs < eraseoffset + erasesize && ofs + len > eraseoffset)
+ {
+ chip_unlock_sector(map, eraseoffset, is_unlock);
+
+ lock_status = chip_is_sector_locked(map, eraseoffset);
+
+ if (is_unlock && lock_status)
+ {
+ printk("Cannot unlock sector at address %x length %xx\n",
+ eraseoffset, merip->erasesize);
+ retval = -1;
+ }
+ else if (!is_unlock && !lock_status)
+ {
+ printk("Cannot lock sector at address %x length %x\n",
+ eraseoffset, merip->erasesize);
+ retval = -1;
+ }
+ }
+ eraseoffset += erasesize;
+ eraseblocks --;
+ }
+ }
+ return retval;
+}
+
+static int
+read_one_chip(struct map_info *map, struct flchip *chip,
+ loff_t adr, size_t len, u_char *buf)
+{
+ uint32_t i;
+ size_t bytes;
+
+ chip->state = FL_READY;
+
+ bytes = SPI_READ_PAGE_SIZE;
+ i = 0;
+ while (len >= bytes)
+ {
+ if (0 != chip_read_bytes(map,adr,bytes,&buf [i]))
+ {
+ printk (KERN_ERR "spi_read failed in read_one_chip function\n");
+ return -1;
+ }
+ len -= bytes;
+ i += bytes;
+ adr += bytes;
+ }
+
+ if (0 != len)
+ {
+ if (0 != chip_read_bytes(map, adr, len, &buf [i]))
+ {
+ printk (KERN_ERR "spi_read failed in read_one_chip function\n");
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+static int
+write_one_chip(struct map_info *map, struct flchip *chip,
+ loff_t addr, size_t len, const u_char * buf)
+{
+ uint32_t page_size, page_offset;
+ uint32_t i;
+
+ chip->state = FL_WRITING;
+
+ /* what page do we start with? */
+ page_offset = addr % SPI_WRITE_PAGE_SIZE;
+
+ /* do all the bytes fit onto one page? */
+ if (page_offset + len <= SPI_WRITE_PAGE_SIZE)
+ {
+ if (0 != chip_write_bytes (map, addr, len, buf))
+ {
+ printk (KERN_ERR "spi writing in the spi_write_bytes function failed\n");
+ return -1;
+ }
+ }
+ else
+ {
+ /* the size of data remaining on the first page */
+ page_size = SPI_WRITE_PAGE_SIZE - page_offset;
+ if (0 != chip_write_bytes (map, addr, page_size, buf))
+ {
+ printk (KERN_ERR "spi writing in the spi_write_bytes function failed\n");
+ return -1;
+ }
+ /* write everything in PAGESIZE chunks */
+ for (i = page_size; i < len; i += page_size)
+ {
+ page_size = len - i;
+ if (page_size > SPI_WRITE_PAGE_SIZE)
+ page_size = SPI_WRITE_PAGE_SIZE;
+ if (0 != chip_write_bytes (map, (addr + i), page_size, (buf + i)))
+ {
+ printk (KERN_ERR "spi writing in the spi_write_bytes function failed\n");
+ return -1;
+ }
+ }
+ }
+
+ chip->state = FL_READY;
+
+ return 0;
+
+}
+
+static int
+erase_one_block(struct map_info *map, struct flchip *chip,ulong addr)
+{
+ int retval = 0;
+
+ chip->state = FL_ERASING;
+
+ retval = chip_erase_sector (map,addr);
+
+ chip->state = FL_READY;
+
+ return (retval);
+}
+/*----------------------------------------------------------------------------------*/
+/* MTD Functions */
+/*----------------------------------------------------------------------------------*/
+int
+spi_flash_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+ return spi_flash_do_unlock(mtd, ofs, len, 1);
+}
+
+int
+spi_flash_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+ return spi_flash_do_unlock(mtd, ofs, len, 0);
+}
+
+int
+spi_flash_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct map_info *map = mtd->priv;
+ struct spi_flash_private *private = map->fldrv_priv;
+ unsigned long ofs;
+ int ret = 0;
+
+ if ((from + len) > mtd->size)
+ {
+ printk(KERN_WARNING "%s: read request past end of device "
+ "(0x%lx)\n", map->name, (unsigned long)from + len);
+ return -EINVAL;
+ }
+
+ ofs = from;
+
+ *retlen = 0;
+ ret = read_one_chip(map, &private->chips,ofs,len,buf);
+
+ if (0 == ret)
+ *retlen = len;
+ else
+ ret = -EINVAL;
+
+ return ret;
+
+}
+
+int
+spi_flash_write(struct mtd_info *mtd, loff_t to , size_t len,
+ size_t *retlen, const u_char *buf)
+{
+
+ struct map_info *map = mtd->priv;
+ struct spi_flash_private *private = map->fldrv_priv;
+
+ if (to > mtd->size)
+ {
+ printk (KERN_ERR "write address > size of spi flash\n");
+ return -EINVAL;
+ }
+
+ if ((len + to) > mtd->size)
+ {
+ printk (KERN_ERR "write address + size > size of spi flash\n");
+ return -EINVAL;
+ }
+
+ *retlen = 0;
+ if (!len)
+ return 0;
+
+ if (0 == write_one_chip(map, &private->chips, to, len, buf))
+ {
+ *retlen = len;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+
+int
+spi_flash_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+ struct map_info *map = mtd->priv;
+ struct spi_flash_private *private = map->fldrv_priv;
+ unsigned long adr, len;
+ int ret = 0;
+ int i;
+ int first;
+ struct mtd_erase_region_info *regions = mtd->eraseregions;
+
+ if (instr->addr > mtd->size)
+ return -EINVAL;
+
+ if ((instr->len + instr->addr) > mtd->size)
+ return -EINVAL;
+
+ /* Check that both start and end of the requested erase are
+ * aligned with the erasesize at the appropriate addresses.
+ */
+
+ i = 0;
+
+ /* Skip all erase regions which are ended before the start of
+ the requested erase. Actually, to save on the calculations,
+ we skip to the first erase region which starts after the
+ start of the requested erase, and then go back one.
+ */
+ while ((i < mtd->numeraseregions) &&
+ (instr->addr >= regions[i].offset))
+ {
+ i++;
+ }
+ i--;
+
+ /* OK, now i is pointing at the erase region in which this
+ * erase request starts. Check the start of the requested
+ * erase range is aligned with the erase size which is in
+ * effect here.
+ */
+ if (instr->addr & (regions[i].erasesize-1))
+ return -EINVAL;
+
+ /* Remember the erase region we start on. */
+ first = i;
+
+ /* Next, check that the end of the requested erase is aligned
+ * with the erase region at that address.
+ */
+
+ while ((i < mtd->numeraseregions) &&
+ ((instr->addr + instr->len) >= regions[i].offset))
+ {
+ i++;
+ }
+
+ /* As before, drop back one to point at the region in which
+ * the address actually falls.
+ */
+ i--;
+
+ if ((instr->addr + instr->len) & (regions[i].erasesize-1))
+ return -EINVAL;
+
+
+ adr = instr->addr;
+ len = instr->len;
+ i = first;
+
+ while (len)
+ {
+ ret = erase_one_block(map, &private->chips, adr);
+
+ if (ret)
+ return ret;
+
+ adr += regions[i].erasesize;
+ len -= regions[i].erasesize;
+ }
+
+ instr->state = MTD_ERASE_DONE;
+ mtd_erase_callback(instr);
+
+ return 0;
+}
diff --git a/drivers/mtd/spichips/spiflash.h b/drivers/mtd/spichips/spiflash.h
new file mode 100644
index 0000000..2ec2eb4
--- /dev/null
+++ b/drivers/mtd/spichips/spiflash.h
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_SPI_H__
+#define __LINUX_SPI_H__
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/dma-mapping.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+#include <asm/delay.h>
+#include <linux/semaphore.h>
+#define CFG_FLASH_SPI_DRIVER 1 /* Need for compile the modules */
+/*---------------------------------------------------------------------------
+ The folllowing should match exactly with its uboot counterpart spiflash.h
+----------------------------------------------------------------------------*/
+
+#define DEVICE_TYPE_X8 (8 / 8)
+#define DEVICE_TYPE_X16 (16 / 8)
+#define DEVICE_TYPE_X32 (32 / 8)
+
+#define SPI_READ_PAGE_SIZE (4*1024) /* 4K page size */
+#define SPI_WRITE_PAGE_SIZE 256
+
+#define MAX_ERASE_REGIONS 4
+
+struct spi_flash_info
+{
+ const char *name;
+ const __u8 mfr_id;
+ const __u16 dev_id;
+ const __u32 operationmode;
+ const uint64_t size;
+ const unsigned int max_clock;
+ const int numeraseregions;
+ const __u8 address32;
+ const struct mtd_erase_region_info regions[MAX_ERASE_REGIONS];
+};
+
+typedef enum spidir
+{
+ SPI_NONE = 0,
+ SPI_READ = 1,
+ SPI_WRITE = 2
+} SPI_DIR;
+
+struct spi_ctrl_driver
+{
+ struct module *module;
+ struct semaphore lock;
+ char *name;
+ struct list_head list;
+
+ /* Supports operation mode */
+ int operation_mode_mask;
+
+ /* Supports fast read at higher frequency */
+ int fast_read;
+
+ /* Supports fast write at higher frequency */
+ int fast_write;
+
+ /* Max datasize to be used to read type functions in spi_transfer*/
+ int max_read;
+
+ /* spi_transfer can be used for all type of spi access */
+ int (*spi_transfer)(int bank,unsigned char *cmd,int cmdlen, SPI_DIR dir,
+ unsigned char *data, unsigned long datalen);
+
+ /* spi_burst_read is not NULL, if the ctrl supports read large data continuosly */
+ int (*spi_burst_read)(int bank,unsigned char *cmd,int cmdlen, SPI_DIR dir,
+ unsigned char *data, unsigned long datalen);
+
+ int (*spi_configure_clock)(int bank, unsigned int clock);
+
+#ifdef __UBOOT__
+ int (*spi_init)(void);
+#endif
+};
+
+struct spi_chip_driver
+{
+ struct module *module;
+ struct semaphore lock;
+ char *name;
+ struct list_head list;
+ int (*probe)(int bank,struct spi_ctrl_driver *ctlr_drv, struct spi_flash_info *chip_info);
+ void (*unlock_sector) (struct map_info *map, unsigned long sect_addr,int unlock);
+ int (*is_sector_locked)(struct map_info *map, unsigned long sect_addr);
+ int (*erase_sector) (struct map_info *map, unsigned long sect_addr);
+ int (*read_bytes) (struct map_info *map, loff_t addr, size_t bytes, unsigned char *buf);
+ int (*write_bytes) (struct map_info *map, loff_t addr, size_t bytes, const unsigned char *buf);
+ void (*sync) (struct map_info *map);
+ int (*suspend) (struct map_info *map);
+ void (*resume) (struct map_info *map);
+};
+
+struct spi_flash_private
+{
+ int device_type;
+ int interleave;
+ int numchips;
+ unsigned long chipshift;
+ __u8 address32;
+ struct flchip chips;
+ struct spi_chip_driver *chip_drv;
+ struct spi_ctrl_driver *ctrl_drv;
+};
+
+/* SPI Core Functions to register,access chip and controller drivers */
+struct spi_chip_driver *get_spi_chip_driver_by_index (int index);
+struct spi_chip_driver *get_spi_chip_driver_by_name (const char *name);
+struct spi_ctrl_driver *get_spi_ctrl_driver_by_index (int index);
+struct spi_ctrl_driver *get_spi_ctrl_driver_by_name (const char *name);
+void register_spi_chip_driver(struct spi_chip_driver *drv);
+void unregister_spi_chip_driver(struct spi_chip_driver *drv);
+void register_spi_ctrl_driver(struct spi_ctrl_driver *drv);
+void unregister_spi_ctrl_driver(struct spi_ctrl_driver *drv);
+
+/* Functions registered to MTD for accessing the chips */
+int spi_flash_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+int spi_flash_write(struct mtd_info *, loff_t, size_t, size_t *,const u_char *);
+int spi_flash_erase(struct mtd_info *, struct erase_info *);
+void spi_flash_sync(struct mtd_info *);
+int spi_flash_suspend(struct mtd_info *);
+void spi_flash_resume(struct mtd_info *);
+int spi_flash_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+int spi_flash_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+
+/* Generic spi funtions which can be used by any spi device (if uses generic algo) */
+int spi_generic_write_enable(int bank,struct spi_ctrl_driver *ctrl_drv);
+int spi_generic_read_enable(int bank,struct spi_ctrl_driver *ctrl_drv);
+int spi_generic_read_status(int bank,struct spi_ctrl_driver *ctrl_drv,unsigned char *status);
+int spi_generic_write_status(int bank,struct spi_ctrl_driver *ctrl_drv, unsigned char status);
+int spi_generic_erase(struct map_info *map, unsigned long sect_addr);
+int spi_generic_read(struct map_info *map, loff_t addr, size_t bytes, unsigned char *buff);
+int spi_generic_write(struct map_info *map, loff_t addr, size_t bytes, const unsigned char *buff);
+int spi_generic_probe(int bank, struct spi_ctrl_driver *ctrl_drv, struct spi_flash_info *chip_info,
+ char *spi_name,struct spi_flash_info *spi_list, int spi_list_len);
+
+#ifdef CONFIG_SPX_FEATURE_GLOBAL_BKUP_FLASH_BANKS
+#define MAX_SPI_BANKS (CONFIG_SPX_FEATURE_GLOBAL_FLASH_BANKS + CONFIG_SPX_FEATURE_GLOBAL_BKUP_FLASH_BANKS)
+#else
+#define MAX_SPI_BANKS CONFIG_SPX_FEATURE_GLOBAL_FLASH_BANKS
+#endif
+
+#endif
diff --git a/drivers/mtd/spichips/spimtd.c b/drivers/mtd/spichips/spimtd.c
new file mode 100644
index 0000000..3c3a3c0
--- /dev/null
+++ b/drivers/mtd/spichips/spimtd.c
@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "spiflash.h"
+
+static struct mtd_info * spi_flash_probe(struct map_info *map);
+static void spi_flash_destroy(struct mtd_info *mtd);
+
+static struct mtd_chip_driver spi_flash_chipdrv =
+{
+ .probe = spi_flash_probe,
+ .destroy = spi_flash_destroy,
+ .name = "spi_probe",
+ .module = THIS_MODULE
+};
+
+unsigned long ractrends_spiflash_flash_id[MAX_SPI_BANKS];
+unsigned long ractrends_spiflash_flash_size[MAX_SPI_BANKS];
+
+/*------------------------------------------------------------------------------*/
+/* Probe Function */
+/*------------------------------------------------------------------------------*/
+static
+int
+probe_spi_chips(struct map_info *map,struct spi_flash_private *private,
+ struct spi_flash_info *spi_info)
+{
+ int bank = map->map_priv_1;
+ int req = 0;
+ int ctrl,chip;
+ int gotindex;
+ struct spi_chip_driver *chip_drv;
+ struct spi_ctrl_driver *ctrl_drv;
+
+ gotindex=0;
+
+ /* For Every Controller driver */
+ ctrl = 0;
+ ctrl_drv = get_spi_ctrl_driver_by_index(ctrl);
+ while (ctrl_drv != NULL)
+ {
+ /* For Every Chip driver */
+ chip = 0;
+ chip_drv = get_spi_chip_driver_by_index(chip);
+ while (chip_drv != NULL)
+ {
+ /* Probe for the chip on the controller */
+ if (chip_drv->probe(bank,ctrl_drv,spi_info) == 0)
+ {
+ /* If success, check if it is the requested index */
+ if (req == gotindex)
+ {
+ private->chip_drv = chip_drv;
+ private->ctrl_drv = ctrl_drv;
+ return 0;
+ }
+ gotindex++;
+ }
+ /* Try Next chip */
+ chip++;
+ chip_drv = get_spi_chip_driver_by_index(chip);
+ }
+ /* Try next controller */
+ ctrl++;
+ ctrl_drv = get_spi_ctrl_driver_by_index(ctrl);
+ }
+ return -1;
+}
+
+static int configure_spi_clock(struct spi_ctrl_driver *ctrl_drv, int bank, unsigned int clock)
+{
+ if (ctrl_drv->spi_configure_clock == NULL)
+ return 0;
+
+ return ctrl_drv->spi_configure_clock(bank, clock);
+}
+
+/*--------------------------------------------------------------------------------------*/
+/* Interfaces to MTD Module */
+/*--------------------------------------------------------------------------------------*/
+static struct mtd_info *
+spi_flash_probe(struct map_info *map)
+{
+ struct mtd_info *mtd;
+ struct spi_flash_private *private;
+
+ struct spi_flash_info spi_info;
+ struct flchip chips;
+ int j,i;
+
+
+ private = kmalloc(sizeof(*private) + sizeof(struct flchip) , GFP_KERNEL);
+ if (!private)
+ {
+ printk(KERN_WARNING
+ "%s: kmalloc failed for private structure\n", map->name);
+ return NULL;
+ }
+ memset(private,0,sizeof(*private) + (sizeof(struct flchip)));
+
+ mtd = (struct mtd_info*)kmalloc(sizeof(*mtd), GFP_KERNEL);
+ if (!mtd)
+ {
+ printk(KERN_WARNING
+ "%s: kmalloc failed for info structure\n", map->name);
+ return NULL;
+ }
+ memset(mtd, 0, sizeof(*mtd));
+
+ mtd->priv = map;
+
+ memset(&spi_info, 0, sizeof(spi_info));
+ if (probe_spi_chips(map,private,&spi_info) == -1)
+ {
+ printk(KERN_WARNING
+ "%s: No spi compatible flash device found\n",
+ map->name);
+ map->fldrv_priv = NULL;
+ kfree(mtd);
+ kfree(private);
+ return NULL;
+ }
+
+ /* Fill flash ID and size in public array */
+ ractrends_spiflash_flash_id[map->map_priv_1] = ((spi_info.mfr_id << 16) | spi_info.dev_id);
+ ractrends_spiflash_flash_size[map->map_priv_1] = spi_info.size;
+
+ configure_spi_clock(private->ctrl_drv, map->map_priv_1, spi_info.max_clock);
+
+ chips.start = 0;
+ chips.state = FL_READY;
+
+
+ /* Fill in the mtd structures */
+ mtd->size = spi_info.size;
+ mtd->numeraseregions = spi_info.numeraseregions;
+
+ /* Allocate memory for erase regions */
+ mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info) *
+ mtd->numeraseregions, GFP_KERNEL);
+ if (!mtd->eraseregions)
+ {
+ printk(KERN_WARNING "%s: Failed to allocate "
+ "memory for MTD erase region info\n", map->name);
+ kfree(mtd);
+ kfree(private);
+ map->fldrv_priv = NULL;
+ return NULL;
+ }
+
+ /* Fill in the mtd erase structures */
+ for (j = 0; j < spi_info.numeraseregions; j++)
+ {
+ mtd->eraseregions[j].offset = spi_info.regions[j].offset;
+ mtd->eraseregions[j].erasesize = spi_info.regions[j].erasesize;
+ mtd->eraseregions[j].numblocks = spi_info.regions[j].numblocks;
+ if (mtd->erasesize < mtd->eraseregions[j].erasesize)
+ mtd->erasesize = mtd->eraseregions[j].erasesize;
+ }
+
+
+ /* Fill in the remaining mtd structure */
+ mtd->type = MTD_NORFLASH;
+ mtd->flags = MTD_CAP_NORFLASH;
+ mtd->name = map->name;
+ mtd->_erase = spi_flash_erase;
+ mtd->_read = spi_flash_read;
+ mtd->_write = spi_flash_write;
+ mtd->_sync = spi_flash_sync;
+ mtd->_suspend = spi_flash_suspend;
+ mtd->_resume = spi_flash_resume;
+ mtd->_lock = spi_flash_lock;
+ mtd->_unlock = spi_flash_unlock;
+ mtd->writesize = 1;
+
+ /* Fill in the private structure */
+ private->numchips = 1;
+ private->device_type = DEVICE_TYPE_X8;
+ private->interleave = 1;
+ private->address32 = spi_info.address32;
+ memcpy(&private->chips, &chips,sizeof(struct flchip) * private->numchips);
+ for (i = 0; i < private->numchips; i++)
+ {
+ init_waitqueue_head(&private->chips.wq);
+ mutex_init(&private->chips.mutex);
+ }
+
+ /* Fill in the map structure */
+ map->fldrv_priv = private;
+ map->bankwidth = 1;
+ map->fldrv = &spi_flash_chipdrv;
+ __module_get(THIS_MODULE);
+
+ return mtd;
+}
+
+
+static void
+spi_flash_destroy(struct mtd_info *mtd)
+{
+ struct map_info *map = mtd->priv;
+ struct spi_flash_private *private = map->fldrv_priv;
+ kfree(private);
+}
+
+
+int __init
+spi_flash_init(void)
+{
+ register_mtd_chip_driver(&spi_flash_chipdrv);
+ return 0;
+}
+
+void __exit
+spi_flash_exit(void)
+{
+ unregister_mtd_chip_driver(&spi_flash_chipdrv);
+}
+
+module_init(spi_flash_init);
+module_exit(spi_flash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("Core SPI with MTD Interface");
+
diff --git a/drivers/mtd/spichips/spireg.c b/drivers/mtd/spichips/spireg.c
new file mode 100644
index 0000000..09aaa51
--- /dev/null
+++ b/drivers/mtd/spichips/spireg.c
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifdef __UBOOT__
+#include <common.h>
+#endif
+#include "spiflash.h"
+#ifdef CFG_FLASH_SPI_DRIVER
+
+DEFINE_SPINLOCK(spi_chip_drvs_lock);
+LIST_HEAD(spi_chip_drvs_list);
+DEFINE_SPINLOCK(spi_ctrl_drvs_lock);
+LIST_HEAD(spi_ctrl_drvs_list);
+
+void
+register_spi_chip_driver(struct spi_chip_driver *drv)
+{
+ spin_lock(&spi_chip_drvs_lock);
+ list_add(&drv->list, &spi_chip_drvs_list);
+ spin_unlock(&spi_chip_drvs_lock);
+}
+
+void
+unregister_spi_chip_driver(struct spi_chip_driver *drv)
+{
+ spin_lock(&spi_chip_drvs_lock);
+ list_del(&drv->list);
+ spin_unlock(&spi_chip_drvs_lock);
+}
+
+void
+register_spi_ctrl_driver(struct spi_ctrl_driver *drv)
+{
+ spin_lock(&spi_ctrl_drvs_lock);
+ list_add(&drv->list, &spi_ctrl_drvs_list);
+ spin_unlock(&spi_ctrl_drvs_lock);
+}
+
+void
+unregister_spi_ctrl_driver(struct spi_ctrl_driver *drv)
+{
+ spin_lock(&spi_ctrl_drvs_lock);
+ list_del(&drv->list);
+ spin_unlock(&spi_ctrl_drvs_lock);
+}
+
+struct spi_chip_driver *
+get_spi_chip_driver_by_name (const char *name)
+{
+ struct list_head *pos;
+ struct spi_chip_driver *ret = NULL, *this;
+
+ spin_lock(&spi_chip_drvs_lock);
+
+ list_for_each(pos, &spi_chip_drvs_list) {
+ this = list_entry(pos, typeof(*this), list);
+
+ if (!strcmp(this->name, name)) {
+ ret = this;
+ break;
+ }
+ }
+ if (ret && !try_module_get(ret->module))
+ ret = NULL;
+
+ spin_unlock(&spi_chip_drvs_lock);
+
+ return ret;
+}
+
+struct spi_chip_driver *
+get_spi_chip_driver_by_index (int index)
+{
+ struct list_head *pos;
+ struct spi_chip_driver *ret = NULL, *this;
+ int got;
+
+ spin_lock(&spi_chip_drvs_lock);
+
+ got=0;
+ list_for_each(pos, &spi_chip_drvs_list) {
+ this = list_entry(pos, typeof(*this), list);
+
+ if (index == got) {
+ ret = this;
+ break;
+ }
+ got++;
+ }
+ if (ret && !try_module_get(ret->module))
+ ret = NULL;
+
+ spin_unlock(&spi_chip_drvs_lock);
+
+ return ret;
+}
+
+
+struct spi_ctrl_driver *
+get_spi_ctrl_driver_by_name (const char *name)
+{
+ struct list_head *pos;
+ struct spi_ctrl_driver *ret = NULL, *this;
+
+ spin_lock(&spi_ctrl_drvs_lock);
+
+ list_for_each(pos, &spi_ctrl_drvs_list) {
+ this = list_entry(pos, typeof(*this), list);
+
+ if (!strcmp(this->name, name)) {
+ ret = this;
+ break;
+ }
+ }
+ if (ret && !try_module_get(ret->module))
+ ret = NULL;
+
+ spin_unlock(&spi_ctrl_drvs_lock);
+
+ return ret;
+}
+
+struct spi_ctrl_driver *
+get_spi_ctrl_driver_by_index (int index)
+{
+ struct list_head *pos;
+ struct spi_ctrl_driver *ret = NULL, *this;
+ int got;
+
+ spin_lock(&spi_ctrl_drvs_lock);
+
+ got=0;
+ list_for_each(pos, &spi_ctrl_drvs_list) {
+ this = list_entry(pos, typeof(*this), list);
+
+ if (index == got) {
+ ret = this;
+ break;
+ }
+ got++;
+ }
+ if (ret && !try_module_get(ret->module))
+ ret = NULL;
+
+ spin_unlock(&spi_ctrl_drvs_lock);
+
+ return ret;
+}
+
+
+
+EXPORT_SYMBOL(get_spi_chip_driver_by_name);
+EXPORT_SYMBOL(get_spi_chip_driver_by_index);
+EXPORT_SYMBOL(get_spi_ctrl_driver_by_name);
+EXPORT_SYMBOL(get_spi_ctrl_driver_by_index);
+EXPORT_SYMBOL(register_spi_ctrl_driver);
+EXPORT_SYMBOL(unregister_spi_ctrl_driver);
+EXPORT_SYMBOL(register_spi_chip_driver);
+EXPORT_SYMBOL(unregister_spi_chip_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("Core routines for (un)registering spi chip and controller drivers");
+
+#endif
diff --git a/drivers/mtd/spichips/winbond.c b/drivers/mtd/spichips/winbond.c
new file mode 100644
index 0000000..03b203c
--- /dev/null
+++ b/drivers/mtd/spichips/winbond.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifdef __UBOOT__
+#include <common.h>
+#endif
+#include "spiflash.h"
+#ifdef CFG_FLASH_SPI_DRIVER
+
+/* Name, ID1, ID2 , Size, Clock, Erase regions, address mode,{ Offset, Erase Size, Erase Block Count } */
+/* address mode: 0x00 -3 byte address
+ 0x01 - 4 byte address
+ 0x02 - Low byte: 3 byte address, High byte: 4 byte address*/
+static struct spi_flash_info winbond_data [] =
+{
+ /* Winbond 64 K Sectors */
+ { "Winbond W25X64" , 0xEF, 0x1730, 0x00010007, 0x800000 , 75 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 128 },} },
+ { "Winbond W25Q32" , 0xEF, 0x1640, 0x0001000F, 0x400000 , 75 * 1000000 , 1, 0x00, {{ 0, 64 * 1024, 128 },} },
+ { "Winbond W25Q64" , 0xEF, 0x1740, 0x0001000F, 0x800000 , 80 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 128 },} },
+ { "Winbond W25Q128", 0xEF, 0x1840, 0x0001000F, 0x1000000, 104 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 256 },} },
+ { "Winbond W25Q256", 0xEF, 0x1940, 0x0001000F, 0x2000000, 104 * 1000000, 1, 0x02, {{ 0, 64 * 1024, 512 },} },
+ { "Winbond W25M512", 0xEF, 0x1971, 0x0001000f, 0x4000000, 104 * 1000000, 2, 0x06, {{ 0, 64 * 1024, 512 },{ 0x2000000, 64 * 1024, 512 },} },
+};
+
+static
+int
+winbond_probe(int bank,struct spi_ctrl_driver *ctrl_drv, struct spi_flash_info *chip_info)
+{
+ int retval;
+ retval = spi_generic_probe(bank,ctrl_drv,chip_info,"winbond",
+ winbond_data,ARRAY_SIZE(winbond_data));
+
+ if (retval == -1)
+ return retval;
+
+ /* UnProctect all sectors */
+ /* SRWD=0 (Bit 7) BP0,BP1,BP2 = 0 (Bit 2,3,4) */
+ if (spi_generic_write_status(bank,ctrl_drv,0x0) < 0)
+ printk("winbond: Unable to Unprotect all sectors\n");
+
+ return retval;
+}
+
+struct spi_chip_driver winbond_driver =
+{
+ .name = "winbond",
+ .module = THIS_MODULE,
+ .probe = winbond_probe,
+ .erase_sector = spi_generic_erase,
+ .read_bytes = spi_generic_read,
+ .write_bytes = spi_generic_write,
+};
+
+int
+winbond_init(void)
+{
+ sema_init(&winbond_driver.lock, 1);
+#ifdef __UBOOT__ /* MIPS */
+ winbond_driver.probe = winbond_probe;
+ winbond_driver.erase_sector = spi_generic_erase;
+ winbond_driver.read_bytes = spi_generic_read;
+ winbond_driver.write_bytes = spi_generic_write;
+#endif
+ register_spi_chip_driver(&winbond_driver);
+ return 0;
+}
+
+void
+winbond_exit(void)
+{
+ sema_init(&winbond_driver.lock, 1);
+ unregister_spi_chip_driver(&winbond_driver);
+ return;
+}
+
+module_init(winbond_init);
+module_exit(winbond_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("MTD SPI driver for Winbond flash chips");
+
+#endif
--
1.9.1离线
楼主 #14 2018-09-04 08:47:49 分享评论
楼主 #15 2018-09-04 15:16:32 分享评论
楼主 #16 2018-09-04 16:00:46 分享评论
- 晕哥
- 管理员
- 注册时间： 2017-09-06
- 已发帖子： 9,350
- 积分： 9202
Re: 买两片 W25M512JVFIQ 测试一下
u-boot执行正常 说明: BROM 把 u-boot 读出来没问题
linux执行正常 说明: u-boot 读 flash也没问题
我现在用 flashcp 把 u-boot-sunxi-with-spl.bin 写入 /dev/mtd0,
出现校验错误:
# flash_eraseall /dev/mtd0
Erasing 4 Kibyte @ f0000 - 100% complete.
# flashcp -v u-boot-sunxi-with-spl.bin /dev/mtd0
Erasing block: 107/107 (100%)
Writing kb: 426/426 (100%)
Verifying kb: 0/426 (0%) flashcp: verification mismatch at 0x0
然后我把 /dev/mtd0 dump 出来
dd if=/dev/mtd0 of=5.bin
使用 beyond compare 比较, 完全一致， 说明一个问题:
spi flash 的读驱动有问题，写驱动问题不大, 而且是与JLINK读一毛一样的问题。
继续跟踪.
离线
楼主 #17 2018-09-04 18:19:44 分享评论
- 晕哥
- 管理员
- 注册时间： 2017-09-06
- 已发帖子： 9,350
- 积分： 9202
Re: 买两片 W25M512JVFIQ 测试一下
终于可以当32M用了
{ "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 512, SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ | SPI_NOR_4B_OPCODES) },
特别感谢这位网友: https://whycan.cn/t_1108.html
明天继续搞64M 切换 DIE.
现在问题来了， 难道 JLINK 的 JFLashSPI.exe 读程序有 4B 地址的bug ?
离线
楼主 #18 2018-09-05 14:59:35 分享评论
楼主 #19 2018-09-06 08:40:03 分享评论
楼主 #20 2018-09-06 08:43:20 分享评论
- 晕哥
- 管理员
- 注册时间： 2017-09-06
- 已发帖子： 9,350
- 积分： 9202
离线
#21 2019-02-11 10:32:19 分享评论
- jimmy
- 会员
- 注册时间： 2017-10-29
- 已发帖子： 316
- 积分： 315
Re: 买两片 W25M512JVFIQ 测试一下
https://github.com/u-boot/u-boot/blob/master/cmd/mtdparts.c
u-boot 如同 Linux一样，也支持 mtd 分区, 估计是通过partition(分区首地址) + offset(偏移) 方式访问flash地址.
离线
#22 2019-02-11 10:50:57 分享评论
- john78
- 会员
- 注册时间： 2018-07-19
- 已发帖子： 222
- 积分： 160
Re: 买两片 W25M512JVFIQ 测试一下
32M的MX25L2564
在U-BOOT中没有搞定
=> sf probe 0
SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB
=> sf update 0x41010000 0x16200000 0x100
Offset exceeds device limit
sf - SPI flash sub-system
Usage:
sf probe [[bus:]cs] [hz] [mode] - init flash device on given SPI bus
and chip select
sf read addr offset|partition len - read `len' bytes starting at
`offset' or from start of mtd
`partition'to memory at `addr'
sf write addr offset|partition len - write `len' bytes from memory
at `addr' to flash at `offset'
or to start of mtd `partition'
sf erase offset|partition [+]len - erase `len' bytes from `offset'
or from start of mtd `partition'
`+len' round up `len' to block size
sf update addr offset|partition len - erase and write `len' bytes from memory
at `addr' to flash at `offset'
or to start of mtd `partition'
sf protect lock/unlock sector len - protect/unprotect 'len' bytes starting
at address 'sector'
离线
#23 2019-02-11 11:18:54 分享评论
- jimmy
- 会员
- 注册时间： 2017-10-29
- 已发帖子： 316
- 积分： 315
Re: 买两片 W25M512JVFIQ 测试一下
32M flash 操作比 16M及其以下的 flash 多一个步骤,
可以通过两种方式:
1. 开启4B地址模式, 这样可以访问 16M 后面的地址空间
2. 写 EAR 寄存器, 也可以访问后面 16M 空间
理论上来说新 u-boot 应该早就实现了.
离线
#24 2019-02-13 20:22:37 分享评论
- isuman
- 会员
- 注册时间： 2019-02-10
- 已发帖子： 3
- 积分： 3
Re: 买两片 W25M512JVFIQ 测试一下
關注一下flash 準備入坑
最近编辑记录 isuman (2019-02-13 20:22:58)
离线
楼主 #25 2019-02-14 22:49:07 分享评论
- 晕哥
- 管理员
- 注册时间： 2017-09-06
- 已发帖子： 9,350
- 积分： 9202
Re: 买两片 W25M512JVFIQ 测试一下
john78 说：
32M的MX25L2564
在U-BOOT中没有搞定
=> sf probe 0
SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB
=> sf update 0x41010000 0x16200000 0x100
Offset exceeds device limit
sf - SPI flash sub-systemUsage:
sf probe [[bus:]cs] [hz] [mode] - init flash device on given SPI bus
and chip select
sf read addr offset|partition len - read `len' bytes starting at
`offset' or from start of mtd
`partition'to memory at `addr'
sf write addr offset|partition len - write `len' bytes from memory
at `addr' to flash at `offset'
or to start of mtd `partition'
sf erase offset|partition [+]len - erase `len' bytes from `offset'
or from start of mtd `partition'
`+len' round up `len' to block size
sf update addr offset|partition len - erase and write `len' bytes from memory
at `addr' to flash at `offset'
or to start of mtd `partition'
sf protect lock/unlock sector len - protect/unprotect 'len' bytes starting
at address 'sector'
CONFIG_SPI_FLASH_BAR 这个宏开起来试一试
离线
#26 2019-02-14 22:58:04 分享评论
- john78
- 会员
- 注册时间： 2018-07-19
- 已发帖子： 222
- 积分： 160
Re: 买两片 W25M512JVFIQ 测试一下
应该是sf update 的问题。
用sf erase,sf write 可以了
离线
#27 2019-02-15 08:38:59 分享评论
- jimmy
- 会员
- 注册时间： 2017-10-29
- 已发帖子： 316
- 积分： 315
Re: 买两片 W25M512JVFIQ 测试一下
john78 说：
应该是sf update 的问题。
用sf erase,sf write 可以了
sf erase,sf write 这两个功能本来就正常,
而 sf update 有问题?
离线
#28 2019-05-13 17:51:01 分享评论
- smartcar
- 会员
- 注册时间： 2018-02-19
- 已发帖子： 735
- 积分： 735
Re: 买两片 W25M512JVFIQ 测试一下
发现主线上面并没有 W25M512 的补丁, 代码里面并没有适配这个芯片。
哪怕 最新的 linux 5.1 也没有关于 die 切换的代码
https://github.com/torvalds/linux/blob/v5.1/include/linux/mtd/spi-nor.h
https://github.com/torvalds/linux/blob/v5.1/drivers/mtd/spi-nor/spi-nor.c
From c7025568f83800de384c457557169e44740dc8f7 Mon Sep 17 00:00:00 2001
From: "Anton D. Kachalov" <mouse@yandex-team.ru>
Date: Tue, 24 May 2016 19:36:35 +0300
Subject: [PATCH 06/14] Add various MTD SPI chips
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
---
drivers/mtd/spichips/Kconfig | 94 ++++
drivers/mtd/spichips/Makefile | 18 +
drivers/mtd/spichips/astspi.c | 367 +++++++++++++
drivers/mtd/spichips/atmel.c | 133 +++++
drivers/mtd/spichips/default.c | 106 ++++
drivers/mtd/spichips/generic.c | 1052 ++++++++++++++++++++++++++++++++++++++
drivers/mtd/spichips/intels33.c | 96 ++++
drivers/mtd/spichips/m25pxx.c | 121 +++++
drivers/mtd/spichips/macronix.c | 208 ++++++++
drivers/mtd/spichips/micron.c | 104 ++++
drivers/mtd/spichips/spansion.c | 103 ++++
drivers/mtd/spichips/spiaccess.c | 433 ++++++++++++++++
drivers/mtd/spichips/spiflash.h | 178 +++++++
drivers/mtd/spichips/spimtd.c | 241 +++++++++
drivers/mtd/spichips/spireg.c | 180 +++++++
drivers/mtd/spichips/winbond.c | 98 ++++
16 files changed, 3532 insertions(+)
create mode 100644 drivers/mtd/spichips/Kconfig
create mode 100644 drivers/mtd/spichips/Makefile
create mode 100644 drivers/mtd/spichips/astspi.c
create mode 100644 drivers/mtd/spichips/atmel.c
create mode 100644 drivers/mtd/spichips/default.c
create mode 100644 drivers/mtd/spichips/generic.c
create mode 100644 drivers/mtd/spichips/intels33.c
create mode 100644 drivers/mtd/spichips/m25pxx.c
create mode 100644 drivers/mtd/spichips/macronix.c
create mode 100644 drivers/mtd/spichips/micron.c
create mode 100644 drivers/mtd/spichips/spansion.c
create mode 100644 drivers/mtd/spichips/spiaccess.c
create mode 100644 drivers/mtd/spichips/spiflash.h
create mode 100644 drivers/mtd/spichips/spimtd.c
create mode 100644 drivers/mtd/spichips/spireg.c
create mode 100644 drivers/mtd/spichips/winbond.c
diff --git a/drivers/mtd/spichips/Kconfig b/drivers/mtd/spichips/Kconfig
new file mode 100644
index 0000000..c5e5a4c
--- /dev/null
+++ b/drivers/mtd/spichips/Kconfig
@@ -0,0 +1,94 @@
+# drivers/mtd/chips/Kconfig
+# $Id: Kconfig,v 1.18 2005/11/07 11:14:22 gleixner Exp $
+
+menu "SPI Flash chip drivers"
+ depends on MTD!=n
+
+config MTD_SPI
+ bool "Enable MTD support on SPI devices"
+ depends on MTD
+ help
+ Select this if you want to access SPI flash devices via MTD
+
+config MTD_SPI_SPANSION
+ bool "Spansion SPI devices Support"
+ depends on MTD_SPI
+ help
+ Select this if you want to use Spansion SPI devices
+
+config MTD_SPI_MACRONIX
+ bool "Macronix SPI devices Support"
+ depends on MTD_SPI
+ help
+ Select this if you want to use Macronix SPI devices
+
+config MTD_SPI_INTEL_S33
+ bool "Intel S33 SPI devices Support"
+ depends on MTD_SPI
+ help
+ Select this if you want to use Intel S33 SPI devices
+
+config MTD_SPI_WINBOND
+ bool "Winbond SPI devices Support"
+ depends on MTD_SPI
+ help
+ Select this if you want to use Winbond SPI devices
+
+config MTD_SPI_AT
+ bool "Atmel SPI devices Support"
+ depends on MTD_SPI
+ help
+ Select this if you want to use Atmel SPI devices
+
+config MTD_SPI_ST
+ bool "ST Micro SPI devices Support"
+ depends on MTD_SPI
+ help
+ Select this if you want to use ST Microelectronics SPI devices
+
+config MTD_SPI_NUMONYX
+ bool "Numonyx SPI devices Support"
+ depends on MTD_SPI
+ help
+ Select this if you want to use Numonyx SPI devices
+
+config MTD_SPI_MICRON
+ bool "Numonyx SPI devices Support"
+ depends on MTD_SPI
+ help
+ Select this if you want to use Micron SPI devices
+
+config MTD_SPI_DEFAULT
+ bool "Support for SPI Devices not supporting ReadID"
+ depends on MTD_SPI
+ help
+ Select this if the SPI device on your board does not SPI ReadID Command
+
+config DEFAULT_SPI_NAME
+ string "Default SPI Name"
+ depends on MTD_SPI && MTD_SPI_DEFAULT
+ default "default"
+ help
+ Name of the SPI Device that does not support ReadID
+
+config DEFAULT_SPI_SIZE
+ int "Default SPI Size in Bytes"
+ depends on MTD_SPI && MTD_SPI_DEFAULT
+ default "65536"
+ help
+ Chip Size of the SPI Device that does not support ReadID
+
+config DEFAULT_SPI_ERASE_SIZE
+ int "Default SPI Erase Block Size in Bytes"
+ depends on MTD_SPI && MTD_SPI_DEFAULT
+ default "65536"
+ help
+ Erase Block Size of the SPI Device that does not support ReadID
+
+config MTD_AST_SPI
+ bool "AST SOC SPI Flash Controller"
+ depends on MTD_SPI
+ help
+ If you are using SPI device on AST SOC, select Y
+
+endmenu
diff --git a/drivers/mtd/spichips/Makefile b/drivers/mtd/spichips/Makefile
new file mode 100644
index 0000000..b30a452
--- /dev/null
+++ b/drivers/mtd/spichips/Makefile
@@ -0,0 +1,18 @@
+#
+# linux/drivers/spichips/Makefile
+#
+obj-$(CONFIG_MTD_SPI) += spimtd.o spiaccess.o spireg.o generic.o
+
+obj-$(CONFIG_MTD_SPI_ST) += m25pxx.o
+obj-$(CONFIG_MTD_SPI_SPANSION) += spansion.o
+obj-$(CONFIG_MTD_SPI_MACRONIX) += macronix.o
+obj-$(CONFIG_MTD_SPI_AT) += atmel.o
+obj-$(CONFIG_MTD_SPI_INTEL_S33) += intels33.o
+obj-$(CONFIG_MTD_SPI_WINBOND) += winbond.o
+obj-$(CONFIG_MTD_SPI_MICRON) += micron.o
+obj-$(CONFIG_MTD_SPI_NUMONYX) += micron.o
+
+# The default driver should be the last in the list of suppported devices
+obj-$(CONFIG_MTD_SPI_DEFAULT) += default.o
+
+obj-$(CONFIG_MTD_AST_SPI) += astspi.o
diff --git a/drivers/mtd/spichips/astspi.c b/drivers/mtd/spichips/astspi.c
new file mode 100644
index 0000000..a0dc9d4
--- /dev/null
+++ b/drivers/mtd/spichips/astspi.c
@@ -0,0 +1,367 @@
+/*
+ * (C) Copyright 2009
+ * American Megatrends Inc.
+ *
+ * SPI flash controller driver for the AST SoC
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "spiflash.h"
+
+#define AST_FMC_REG_BASE AST_FMC_VA_BASE /* 0x1E620000 */
+#define AST_FMC_FLASH_CTRL_REG 0x00
+
+#define AST_FMC_CE0_CTRL_REG 0x10
+#define AST_FMC_CTRL_REG_SIZE 0x04
+
+#define AST_SPI_CMD_MASK 0x00FF0000 /* bit[23:16] */
+#define AST_SPI_CMD_SHIFT 16
+
+#define AST_SPI_CLOCK_MASK 0x00000F00 /* bit[11:8] */
+#define AST_SPI_CLOCK_SHIFT 8
+
+#define AST_SPI_DUMMY_MASK 0x000000C0 /* bit[7:6] */
+#define AST_SPI_DUMMY_0 0x00000000
+#define AST_SPI_DUMMY_1 0x00000040
+#define AST_SPI_DUMMY_2 0x00000080
+#define AST_SPI_DUMMY_3 0x000000C0
+
+#define AST_SPI_DATA_SINGLE 0x00000000
+#define AST_SPI_DATA_DUAL 0x00000008
+#define AST_SPI_DUAL_IO 0x00000002
+#define AST_SPI_FULL_DUAL_IO 0x00000003
+#define AST_SPI_DATA_MASK 7
+#define AST_SPI_DUAL_IO_SHIFT 28
+
+#define AST_SPI_CE_LOW 0x00000000
+#define AST_SPI_CE_HI 0x00000004
+
+#define AST_SPI_CMD_MODE_MASK 0x00000007 /* bit[2:0] */
+#define AST_SPI_CMD_MODE_NORMAL 0x00000000
+#define AST_SPI_CMD_MODE_FAST 0x00000001
+#define AST_SPI_CMD_MODE_WRITE 0x00000002
+#define AST_SPI_CMD_MODE_USER 0x00000003
+
+#define SPI_FAST_READ_CMD 0x0B
+#define SPI_DREAD_CMD 0x3B
+#define SPI_2READ_CMD 0xBB
+
+extern unsigned long ractrends_spiflash_flash_size[MAX_SPI_BANKS];
+static int *g_fast_read = 0;
+
+static void reset_flash(int bank)
+{
+ uint32_t reg;
+ uint32_t ctrl_reg;
+
+ // bank = 0,CE0 (0x10) ; bank = 1,CE1 (0x14) ; bank = 2,CE2 (0x18)
+ ctrl_reg = AST_FMC_CE0_CTRL_REG + (bank * AST_FMC_CTRL_REG_SIZE);
+
+ reg = ioread32((void __iomem *)AST_FMC_REG_BASE + ctrl_reg);
+ if (*g_fast_read == 3)//2xI/O Read
+ {
+ reg &= ~(AST_SPI_CMD_MASK | AST_SPI_DUMMY_MASK | AST_SPI_CMD_MODE_MASK);
+ reg |= (SPI_2READ_CMD << AST_SPI_CMD_SHIFT) | AST_SPI_DUMMY_1 | AST_SPI_CE_LOW | AST_SPI_CMD_MODE_FAST | (AST_SPI_FULL_DUAL_IO << AST_SPI_DUAL_IO_SHIFT);
+ }
+ else if (*g_fast_read == 2)//Dual Read
+ {
+ reg &= ~(AST_SPI_CMD_MASK | AST_SPI_DUMMY_MASK | AST_SPI_CMD_MODE_MASK);
+ reg |= (SPI_DREAD_CMD << AST_SPI_CMD_SHIFT) | AST_SPI_DUMMY_1 | AST_SPI_CE_LOW | AST_SPI_CMD_MODE_FAST | (AST_SPI_DUAL_IO << AST_SPI_DUAL_IO_SHIFT);
+ }
+ else if (*g_fast_read == 1)//Fast Read
+ {
+ reg &= ~(AST_SPI_CMD_MASK | AST_SPI_DUMMY_MASK | AST_SPI_CMD_MODE_MASK);
+ reg |= (SPI_FAST_READ_CMD << AST_SPI_CMD_SHIFT) | AST_SPI_DUMMY_1 | AST_SPI_CE_LOW | AST_SPI_CMD_MODE_FAST;
+ }
+ else
+ {
+ reg &= (~AST_SPI_CMD_MODE_MASK);
+ reg |= (AST_SPI_CE_LOW | AST_SPI_CMD_MODE_NORMAL);
+ }
+ iowrite32(reg, (void __iomem *)AST_FMC_REG_BASE + ctrl_reg);
+
+}
+
+static void reset_iomode (int bank)
+{
+ uint32_t reg;
+ uint32_t ctrl_reg;
+
+ // bank = 0,CE0 (0x10) ; bank = 1,CE1 (0x14) ; bank = 2,CE2 (0x18)
+ ctrl_reg = AST_FMC_CE0_CTRL_REG + (bank * AST_FMC_CTRL_REG_SIZE);
+
+ reg = ioread32((void __iomem *)AST_FMC_REG_BASE + ctrl_reg);
+ reg &= ~(AST_SPI_CMD_MASK | AST_SPI_DUMMY_MASK | (AST_SPI_DATA_MASK << AST_SPI_DUAL_IO_SHIFT));
+
+ if (*g_fast_read == 2)//Dual Read
+ reg |= (AST_SPI_DUAL_IO << AST_SPI_DUAL_IO_SHIFT);
+ else if (*g_fast_read == 3)//2xI/O Read
+ reg |= (AST_SPI_FULL_DUAL_IO << AST_SPI_DUAL_IO_SHIFT);
+
+ iowrite32(reg, (void __iomem *)AST_FMC_REG_BASE + ctrl_reg);
+
+ return;
+}
+
+static void chip_select_active(int bank)
+{
+ uint32_t reg;
+ uint32_t ctrl_reg;
+
+ // bank = 0,CE0 (0x10) ; bank = 1,CE1 (0x14) ; bank = 2,CE2 (0x18)
+ ctrl_reg = AST_FMC_CE0_CTRL_REG + (bank * AST_FMC_CTRL_REG_SIZE);
+
+ reg = ioread32((void __iomem *)AST_FMC_REG_BASE + ctrl_reg);
+ reg &= (~(AST_SPI_CMD_MODE_MASK | (AST_SPI_DATA_MASK << AST_SPI_DUAL_IO_SHIFT)) );
+ reg |= (AST_SPI_CE_LOW | AST_SPI_CMD_MODE_USER);
+ iowrite32(reg, (void __iomem *)AST_FMC_REG_BASE + ctrl_reg);
+}
+
+static void chip_select_deactive(int bank)
+{
+ uint32_t reg;
+ uint32_t ctrl_reg;
+
+ // bank = 0,CE0 (0x10) ; bank = 1,CE1 (0x14) ; bank = 2,CE2 (0x18)
+ ctrl_reg = AST_FMC_CE0_CTRL_REG + (bank * AST_FMC_CTRL_REG_SIZE);
+
+ reg = ioread32((void __iomem *)AST_FMC_REG_BASE + ctrl_reg);
+ reg &= (~(AST_SPI_CMD_MODE_MASK | (AST_SPI_DATA_MASK << AST_SPI_DUAL_IO_SHIFT)) );
+ reg |= (AST_SPI_CE_HI | AST_SPI_CMD_MODE_USER);
+ iowrite32(reg, (void __iomem *)AST_FMC_REG_BASE + ctrl_reg);
+}
+
+static int astspiflash_transfer(int bank, unsigned char *cmd, int cmdlen, SPI_DIR dir, unsigned char *data, unsigned long datalen)
+{
+ ulong base;
+ int i;
+ ulong offset = 0;
+
+ for(i = 0; i < bank; i++)
+ {
+ offset += ractrends_spiflash_flash_size[i];
+ }
+
+ base = AST_SPI_FLASH_VA_BASE + offset;
+
+ chip_select_active(bank);
+
+ if (cmd[0] == 0xBB)
+ {
+ *((volatile unsigned char *) base) = cmd[0];
+ reset_iomode(bank);
+ for (i = 1; i < cmdlen; i ++)
+ *((volatile unsigned char *) base) = cmd[i];
+ }
+ else if (cmd[0] == 0x3B)
+ {
+ for (i = 0; i < cmdlen; i ++)
+ *((volatile unsigned char *) base) = cmd[i];
+ reset_iomode(bank);
+ }
+ else
+ {
+ /* issue command */
+ for (i = 0; i < cmdlen; i ++)
+ *((volatile unsigned char *) base) = cmd[i];
+ }
+
+ if (dir == SPI_WRITE) {
+ /* write data to flash */
+ for (i = 0; i < datalen; i ++) {
+ *((volatile unsigned char *) base) = data[i];
+ }
+ } else if (dir == SPI_READ) {
+ /* read data from flash */
+ for (i = 0; i < datalen; i ++) {
+ data[i] = ((volatile unsigned char *) base)[i];
+ }
+ }
+
+ chip_select_deactive(bank);
+
+
+ reset_flash(bank);
+ return 0;
+}
+
+static const unsigned char clock_selection_table[] = {
+ 0x0F, /* 1 */
+ 0x07, /* 2 */
+ 0x0E, /* 3 */
+ 0x06, /* 4 */
+ 0x0D, /* 5 */
+ 0x05, /* 6 */
+ 0x0C, /* 7 */
+ 0x04, /* 8 */
+ 0x0B, /* 9 */
+ 0x03, /* 10 */
+ 0x0A, /* 11 */
+ 0x02, /* 12 */
+ 0x09, /* 13 */
+ 0x01, /* 14 */
+ 0x08, /* 15 */
+ 0x00, /* 16 */
+};
+
+static int astspiflash_configure_clock(int bank, unsigned int clock)
+{
+ uint32_t reg;
+ uint32_t cpu_clock;
+ uint32_t clock_divisor;
+ uint32_t ctrl_reg;
+#if defined(CONFIG_SOC_AST2500) || defined(CONFIG_SOC_AST2530)
+ uint32_t cpu_ratio;
+ uint32_t axi_ratio;
+#endif
+ // bank = 0,CE0 (0x10) ; bank = 1,CE1 (0x14) ; bank = 2,CE2 (0x18)
+ ctrl_reg = AST_FMC_CE0_CTRL_REG + (bank * AST_FMC_CTRL_REG_SIZE);
+
+ /* according to AST spec, clock of SPI controller can not exceed 50M Hz */
+ if (clock > (50 * 1000000))
+ clock = 50 * 1000000;
+
+ /* read CPU clock rate and CPU/AHB ratio from SCU */
+ reg = ioread32((void __iomem *)SCU_HW_STRAPPING_REG);
+
+ #if defined(CONFIG_SOC_AST2500) || defined(CONFIG_SOC_AST2530)
+ cpu_ratio = 2;
+
+ switch ((reg & 0x00000E00) >> 9) {
+ case 0x01:
+ axi_ratio = 2;
+ break;
+ case 0x02:
+ axi_ratio = 3;
+ break;
+ case 0x03:
+ axi_ratio = 4;
+ break;
+ case 0x04:
+ axi_ratio = 5;
+ break;
+ case 0x05:
+ axi_ratio = 6;
+ break;
+ case 0x06:
+ axi_ratio = 7;
+ break;
+ case 0x07:
+ axi_ratio = 8;
+ break;
+ default:
+ axi_ratio = 2;
+ break;
+ }
+
+ cpu_clock = 792 * 1000000;//Default H-PLL value
+ cpu_clock = cpu_clock / cpu_ratio / axi_ratio;
+ #else
+ switch ((reg & 0x00000300) >> 8) {
+ case 0x00:
+ cpu_clock = 384 * 1000000;
+ break;
+ case 0x01:
+ cpu_clock = 360 * 1000000;
+ break;
+ case 0x02:
+ cpu_clock = 336 * 1000000;
+ break;
+ case 0x03:
+ cpu_clock = 408 * 1000000;
+ break;
+ default:
+ cpu_clock = 408 * 1000000;
+ }
+
+ switch ((reg & 0x00000C00) >> 10) {
+ case 0x01:
+ cpu_clock /= 2;
+ break;
+ case 0x02:
+ cpu_clock /= 4;
+ break;
+ case 0x03:
+ cpu_clock /= 3;
+ break;
+ }
+ #endif
+
+ clock_divisor = 1;
+ while ((cpu_clock / clock_divisor) > clock) {
+ clock_divisor ++;
+ if (clock_divisor == 16)
+ break;
+ }
+
+ reg = ioread32((void __iomem *)AST_FMC_REG_BASE + ctrl_reg);
+ reg &= ~AST_SPI_CLOCK_MASK;
+ reg |= (clock_selection_table[clock_divisor - 1] << AST_SPI_CLOCK_SHIFT);
+ iowrite32(reg, (void __iomem *)AST_FMC_REG_BASE + ctrl_reg);
+
+ return 0;
+}
+
+struct spi_ctrl_driver astspi_driver = {
+ .name = "astspiflash",
+ .module = THIS_MODULE,
+ .max_read = (64 * 1024 * 1024), /* 32 MB */
+ #ifdef CONFIG_FLASH_OPERATION_MODE_MASK
+ .operation_mode_mask = CONFIG_FLASH_OPERATION_MODE_MASK,
+ #else
+ .operation_mode_mask = 0x00010003, //Default
+ #endif
+ .fast_read = 1,
+ .fast_write = 0,
+ .spi_transfer = astspiflash_transfer,
+ .spi_burst_read = astspiflash_transfer,
+ .spi_configure_clock = astspiflash_configure_clock,
+};
+
+static int astspi_init(void)
+{
+ sema_init(&astspi_driver.lock, 1);
+ register_spi_ctrl_driver(&astspi_driver);
+
+ g_fast_read = &astspi_driver.fast_read;
+
+ reset_flash(0); // CE0
+
+ reset_flash(1); // CE1
+
+ reset_flash(2); // CE2
+ #if !defined(CONFIG_SOC_AST2500) && !defined(CONFIG_SOC_AST2530)
+ reset_flash(3); // CE3
+ #endif
+
+ return 0;
+}
+
+static void astspi_exit(void)
+{
+ unregister_spi_ctrl_driver(&astspi_driver);
+}
+
+module_init(astspi_init);
+module_exit(astspi_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("AST SOC SPI flash controller driver");
diff --git a/drivers/mtd/spichips/atmel.c b/drivers/mtd/spichips/atmel.c
new file mode 100644
index 0000000..a7cfddb
--- /dev/null
+++ b/drivers/mtd/spichips/atmel.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifdef __UBOOT__
+#include <common.h>
+#endif
+#include "spiflash.h"
+#ifdef CFG_FLASH_SPI_DRIVER
+
+/* Name, ID1, ID2 , Size, Clock, Erase regions, address mode,{ Offset, Erase Size, Erase Block Count } */
+/* address mode: 0x00 -3 byte address
+ 0x01 - 4 byte address
+ 0x02 - Low byte: 3 byte address, High byte: 4 byte address*/
+static struct spi_flash_info atmel_data [] =
+{
+ /* Atmel 26F 64K Sectors */
+ { "Atmel at26f004" , 0x1F, 0x0004, 0x00010001, 0x100000 , 25 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 8 },} },
+
+ /* Atmel 25DF 64K Sectors */
+ { "Atmel at25df041a" , 0x1F, 0x0144, 0x00010001, 0x100000 , 70 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 8 },} },
+
+ /* Atmel 26DF 64K Sectors */
+ { "Atmel at26df081a" , 0x1F, 0x0145, 0x00010001, 0x100000 , 70 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 16 },} },
+ { "Atmel at26df161a" , 0x1F, 0x0146, 0x00010001, 0x200000 , 25 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 32 },} },
+ { "Atmel at26df161" , 0x1F, 0x0046, 0x00010001, 0x200000 , 25 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 32 },} },
+ { "Atmel at26df321" , 0x1F, 0x0047, 0x00010001, 0x400000 , 25 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 64 },} },
+ { "Atmel at25df321" , 0x1F, 0x0147, 0x00010001, 0x400000 , 85 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 64 },} },
+};
+
+
+static
+int
+atmel_probe(int bank,struct spi_ctrl_driver *ctrl_drv, struct spi_flash_info *chip_info)
+{
+ int retval;
+ unsigned char status;
+
+ retval = spi_generic_probe(bank, ctrl_drv,chip_info,"atmel",atmel_data,ARRAY_SIZE(atmel_data));
+ if (retval == -1)
+ return retval;
+
+ if (spi_generic_read_status(bank,ctrl_drv,&status) < 0)
+ {
+ printk("atmel: Read SR Failed.Cannot Unprotect all sectors\n");
+ return retval;
+ }
+
+ /* If SRPL = 1 (Bit 7)and WP/ = 0 (Bit 4), then it is hardware locked */
+ if ((status & 0x80) && (!(status & 0x10)))
+ {
+ printk("atmel: Hardware Locked\n");
+ return retval;
+ }
+
+ /* Check if already unprotected */
+ if ((status & 0xC) == 0)
+ return retval;
+
+ /* if SRPL is set, we have to disable SRPL before unprotect */
+ if (status & 0x80)
+ {
+ if (spi_generic_write_status(bank,ctrl_drv,status& 0x7F) < 0)
+ {
+ printk("atmel: Clearing SRPL failed .Cannot Unprotect all sectors\n");
+ return retval;
+ }
+ }
+
+ /* Unprotect all sectors */
+ if (spi_generic_write_status(bank,ctrl_drv,0x0) < 0)
+ printk("atmel: Unable to Unprotect all sectors\n");
+
+
+ return retval;
+}
+
+struct spi_chip_driver atmel_driver =
+{
+ .name = "atmel",
+ .module = THIS_MODULE,
+ .probe = atmel_probe,
+ .erase_sector = spi_generic_erase,
+ .read_bytes = spi_generic_read,
+ .write_bytes = spi_generic_write,
+ /* Atmel supports individual protect and unprotect of sectors */
+ /* if needed implement the functions and add here */
+};
+
+int
+atmel_init(void)
+{
+ sema_init(&atmel_driver.lock, 1);
+#ifdef __UBOOT__ /* MIPS */
+ atmel_driver.probe = atmel_probe;
+ atmel_driver.erase_sector = spi_generic_erase;
+ atmel_driver.read_bytes = spi_generic_read;
+ atmel_driver.write_bytes = spi_generic_write;
+#endif
+ register_spi_chip_driver(&atmel_driver);
+ return 0;
+}
+
+void
+atmel_exit(void)
+{
+ sema_init(&atmel_driver.lock, 1);
+ unregister_spi_chip_driver(&atmel_driver);
+ return;
+}
+
+module_init(atmel_init);
+module_exit(atmel_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("MTD SPI driver for Atmel flash chips");
+
+#endif
diff --git a/drivers/mtd/spichips/default.c b/drivers/mtd/spichips/default.c
new file mode 100644
index 0000000..93f31d7
--- /dev/null
+++ b/drivers/mtd/spichips/default.c
@@ -0,0 +1,106 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifdef __UBOOT__
+#include <common.h>
+#endif
+#include "spiflash.h"
+#ifdef CFG_FLASH_SPI_DRIVER
+
+#ifndef CONFIG_DEFAULT_SPI_NAME
+#define CONFIG_DEFAULT_SPI_NAME "Unknown SPI Device"
+#endif
+
+#ifndef CONFIG_DEFAULT_SPI_SIZE
+#define CONFIG_DEFAULT_SPI_SIZE 0
+#endif
+
+#ifndef CONFIG_DEFAULT_SPI_CLOCK
+#define CONFIG_DEFAULT_SPI_CLOCK (25 * 1000000)
+#endif
+
+#ifndef CONFIG_DEFAULT_SPI_ERASE_SIZE
+#define CONFIG_DEFAULT_SPI_ERASE_SIZE (64 *1024)
+#endif
+
+
+/* This driver is called at end when all probe failed. Some chips don't support read id
+ commands and user can provide the information here */
+
+/* Name, ID1, ID2 , Size, Clock, Erase regions, address mode,{ Offset, Erase Size, Erase Block Count } */
+/* address mode: 0x00 -3 byte address
+ 0x01 - 4 byte address
+ 0x02 - Low byte: 3 byte address, High byte: 4 byte address*/
+static struct spi_flash_info default_data [] =
+{
+ { CONFIG_DEFAULT_SPI_NAME , 0xFF, 0x0FFFF, 0x00010001, CONFIG_DEFAULT_SPI_SIZE , CONFIG_DEFAULT_SPI_CLOCK, 1, 0x00,
+ {{ 0, CONFIG_DEFAULT_SPI_ERASE_SIZE, CONFIG_DEFAULT_SPI_SIZE/CONFIG_DEFAULT_SPI_ERASE_SIZE },} },
+};
+
+static
+int
+default_probe(int bank,struct spi_ctrl_driver *ctrl_drv, struct spi_flash_info *chip_info)
+{
+ memcpy(chip_info,&default_data[0],sizeof(struct spi_flash_info));
+
+ if (spi_generic_write_status(bank,ctrl_drv,0x0) < 0)
+ printk("%s: Unable to Unprotect all sectors\n",CONFIG_DEFAULT_SPI_NAME);
+ return 0;
+}
+
+struct spi_chip_driver default_driver =
+{
+ .name = "default",
+ .module = THIS_MODULE,
+ .probe = default_probe,
+ .erase_sector = spi_generic_erase,
+ .read_bytes = spi_generic_read,
+ .write_bytes = spi_generic_write,
+};
+
+int
+default_init(void)
+{
+ sema_init(&default_driver.lock, 1);
+#ifdef __UBOOT__ /* MIPS */
+ default_driver.probe = default_probe;
+ default_driver.erase_sector = spi_generic_erase;
+ default_driver.read_bytes = spi_generic_read;
+ default_driver.write_bytes = spi_generic_write;
+#endif
+ register_spi_chip_driver(&default_driver);
+ return 0;
+}
+
+void
+default_exit(void)
+{
+ sema_init(&default_driver.lock, 1);
+ unregister_spi_chip_driver(&default_driver);
+ return;
+}
+
+module_init(default_init);
+module_exit(default_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("MTD SPI driver for Default flash chips");
+
+#endif
diff --git a/drivers/mtd/spichips/generic.c b/drivers/mtd/spichips/generic.c
new file mode 100644
index 0000000..50a70f6
--- /dev/null
+++ b/drivers/mtd/spichips/generic.c
@@ -0,0 +1,1052 @@
+/*
+ * Copyright (C) 2007-2013 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifdef __UBOOT__
+#include <common.h>
+#endif
+#include "spiflash.h"
+#ifdef CFG_FLASH_SPI_DRIVER
+
+/* Flash opcodes. */
+#define OPCODE_WREN 0x06 /* Write enable */
+#define OPCODE_WRDI 0x04 /* Write disable*/
+#define OPCODE_RDID 0x9F /* Read JEDEC ID */
+#define OPCODE_RDSR 0x05 /* Read status register */
+#define OPCODE_WRSR 0x01 /* Write status register */
+#define OPCODE_READ 0x03 /* Read data bytes */
+#define OPCODE_FAST_READ 0x0B /* Read Fast read */
+#define OPCODE_DREAD 0x3B /* Dual Read Mode */
+#define OPCODE_2READ 0xBB /* 2 x I/O Read Mode */
+#define OPCODE_PP 0x02 /* Page program */
+#define OPCODE_SE 0xD8 /* Sector erase */
+#define OPCODE_DP 0xB9 /* Deep Power Down */
+#define OPCODE_RES 0xAB /* Read Electronic Signature */
+
+/* Status Register bits. */
+#define SR_WIP 0x01 /* Write in progress */
+#define SR_WEL 0x02 /* Write enable latch */
+#define SR_BP0 0x04 /* Block protect 0 */
+#define SR_BP1 0x08 /* Block protect 1 */
+#define SR_BP2 0x10 /* Block protect 2 */
+#define SR_SRWD 0x80 /* SR write protect */
+
+#define PROGRAM_PAGE_SIZE 256 /* Max Program Size */
+
+#define ADDR_16MB 0x1000000
+#define CMD_MX25XX_EN4B 0xb7 /* Enter 4-byte address mode */
+#define CMD_MX25XX_EX4B 0xe9 /* Exit 4-byte address mode */
+
+
+#define ADDRESS_3BYTE 0x00
+#define ADDRESS_4BYTE 0x01
+#define ADDRESS_LO3_HI4_BYTE 0x02
+
+#define ADDRESS_DIE_LO3_HI4_BYTE 0x06
+#define ADDR_32MB 0x2000000
+#define CMD_WX25XX_CS 0xc2 /* Die select */
+
+extern unsigned long ractrends_spiflash_flash_id[MAX_SPI_BANKS];
+
+static int wait_till_ready(int bank,struct spi_ctrl_driver *ctrl_drv);
+
+static
+int inline
+spi_error(int retval)
+{
+ printk("SPI Chip %s (%d) : Error (%d)\n",__FILE__,__LINE__,retval);
+ return retval;
+}
+
+static int
+spi_generic_read_flag_status(int bank, struct spi_ctrl_driver *ctrl_drv,unsigned char *status)
+{
+ int retval;
+ u8 code = 0x70;
+
+ /* Issue Controller Transfer Routine */
+ retval = ctrl_drv->spi_transfer(bank,&code, 1,SPI_READ,status, 1);
+
+ if (retval < 0)
+ return spi_error(retval);
+
+ return 0;
+}
+
+
+
+int
+spi_generic_read_status(int bank, struct spi_ctrl_driver *ctrl_drv,unsigned char *status)
+{
+ int retval;
+ u8 code = OPCODE_RDSR;
+
+ /* Issue Controller Transfer Routine */
+ retval = ctrl_drv->spi_transfer(bank,&code, 1,SPI_READ,status, 1);
+
+ if (retval < 0)
+ return spi_error(retval);
+
+ return 0;
+}
+
+int
+spi_generic_write_status(int bank,struct spi_ctrl_driver *ctrl_drv, unsigned char status)
+{
+ int retval;
+ u8 code = OPCODE_WRSR;
+
+ /* Send write enable */
+ spi_generic_write_enable(bank,ctrl_drv);
+
+ /* Issue Controller Transfer Routine */
+ retval = ctrl_drv->spi_transfer(bank,&code, 1,SPI_WRITE,&status, 1);
+ if (retval < 0)
+ return spi_error(retval);
+
+ return 0;
+}
+
+
+int
+spi_generic_write_enable(int bank,struct spi_ctrl_driver *ctrl_drv)
+{
+ u8 code = OPCODE_WREN;
+ int retval;
+
+ /* Issue Controller Transfer Routine */
+ retval = ctrl_drv->spi_transfer(bank,&code, 1,SPI_NONE, NULL, 0);
+ if (retval < 0)
+ return spi_error(retval);
+ return 0;
+}
+
+int
+spi_generic_write_disable(int bank, struct spi_ctrl_driver *ctrl_drv)
+{
+ u8 code = OPCODE_WRDI;
+ int retval;
+
+ /* Issue Controller Transfer Routine */
+ retval = ctrl_drv->spi_transfer(bank,&code, 1,SPI_NONE, NULL, 0);
+ if (retval < 0)
+ return spi_error(retval);
+ return 0;
+}
+
+int spi_generic_select_die(int bank, u8 die_num, struct spi_ctrl_driver *ctrl_drv)
+{
+ int retval;
+ u8 command[2];
+
+ command[0] = CMD_WX25XX_CS;
+ command[1] = die_num;
+
+ /* Wait until finished previous command. */
+ if (wait_till_ready(bank,ctrl_drv))
+ {
+ return -1;
+ }
+
+ retval = ctrl_drv->spi_transfer(bank, command, 2, SPI_NONE, NULL, 0);
+
+ if (retval < 0)
+ {
+ printk ("Could not select die.\n");
+ return spi_error(retval);
+ }
+ return 0;
+}
+
+int enter_4byte_addr_mode(int bank, struct spi_ctrl_driver *ctrl_drv)
+{
+ //enable 32 MB Address mode
+ u8 code = CMD_MX25XX_EN4B;
+ int retval;
+
+ //printf("<ENTER> 4 BYTE\n");
+ /* Wait until finished previous command. */
+ if (wait_till_ready(bank,ctrl_drv))
+ {
+ return -1;
+ }
+
+
+ /* Issue Controller Transfer Routine */
+ if ((ractrends_spiflash_flash_id[bank] == 0x002019BA) || (ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA))
+ spi_generic_write_enable(bank,ctrl_drv);
+ retval = ctrl_drv->spi_transfer(bank, &code, 1, SPI_NONE, NULL, 0);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002019BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA))
+ spi_generic_write_disable(bank,ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Could not Enter into 4-byte address mode\n");
+ return spi_error(retval);
+ }
+ return 0;
+}
+
+int exit_4byte_addr_mode(int bank, struct spi_ctrl_driver *ctrl_drv)
+{
+ //Disable 32 MB Address mode
+ u8 code = CMD_MX25XX_EX4B;
+ int retval;
+
+ //printf("<EXIT> 4 BYTE\n");
+ /* Wait until finished previous command. */
+ if (wait_till_ready(bank,ctrl_drv))
+ {
+ return -1;
+ }
+
+
+ /* Issue Controller Transfer Routine */
+ if ((ractrends_spiflash_flash_id[bank] == 0x002019BA) || (ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA))
+ spi_generic_write_enable(bank,ctrl_drv);
+ retval = ctrl_drv->spi_transfer(bank, &code, 1, SPI_NONE, NULL, 0);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002019BA) || (ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA))
+ spi_generic_write_disable(bank,ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Could not Exit from 4-byte address mode\n");
+ return spi_error(retval);
+ }
+ return 0;
+}
+
+int spi_generic_extended_address(int bank, SPI_DIR dir, u8 addr, struct spi_ctrl_driver *ctrl_drv)
+{
+ int retval;
+
+ if (dir == SPI_READ)
+ {
+ u8 code = 0xC8;
+ u8 reg_data;
+
+ ctrl_drv->spi_transfer(bank, &code, 1, SPI_READ, ®_data, 1);
+ retval = (int) reg_data;
+ }
+ else if (dir == SPI_WRITE)
+ {
+ u8 command[2];
+
+ command[0] = 0xC5;
+ command[1] = addr;
+ spi_generic_write_enable(bank, ctrl_drv);
+ ctrl_drv->spi_transfer(bank, command, 2, SPI_NONE, NULL, 0);
+ spi_generic_write_disable(bank, ctrl_drv);
+ retval = command[1];
+ }
+ else // SPI_NONE
+ {
+ retval = 0;
+ }
+
+ return retval;
+}
+
+// the function just for WINBOND W25Q256 only, always revise the extended address to the defalut
+int w25q256_force_extended_address(int bank, struct spi_ctrl_driver *ctrl_drv)
+{
+ int retval;
+ u8 code;
+ u8 reg_data;
+ u8 command[5];
+
+ code = 0xC8; // "Read Extended Address Register"
+ retval = ctrl_drv->spi_transfer(bank, &code, 1, SPI_READ, ®_data, 1);
+ if (reg_data == 0x01)
+ {
+ spi_generic_write_enable(bank,ctrl_drv);
+ command[0] = 0xC5; // "Write Extended Address Register" with the force address 0x00
+ command[1] = command[2] = command[3] = command[4] = 0x00;
+ retval = ctrl_drv->spi_transfer(bank, command, 5, SPI_NONE, NULL, 0);
+ spi_generic_write_disable(bank,ctrl_drv);
+ }
+ return 0;
+}
+
+/* Define max times to check status register before we give up. */
+#define MAX_READY_WAIT_COUNT 4000000
+
+static int
+wait_till_ready(int bank,struct spi_ctrl_driver *ctrl_drv)
+{
+ unsigned long count;
+ unsigned char sr;
+
+ for (count = 0; count < MAX_READY_WAIT_COUNT; count++)
+ {
+ if (spi_generic_read_status(bank,ctrl_drv,&sr) < 0)
+ {
+ printk("Error reading SPI Status Register\n");
+ break;
+ }
+ else
+ {
+ if (!(sr & SR_WIP))
+ return 0;
+ }
+ }
+
+ printk("spi_generic: Waiting for Ready Failed\n");
+ return 1;
+}
+
+static int
+require_read_flag_status(int bank,struct spi_ctrl_driver *ctrl_drv)
+{
+ unsigned long count;
+ unsigned char sr;
+
+ for (count = 0; count < MAX_READY_WAIT_COUNT; count++)
+ {
+ if (spi_generic_read_flag_status(bank,ctrl_drv,&sr) < 0)
+ {
+ printk("Error reading SPI Status Register\n");
+ break;
+ }
+ else
+ {
+ if (sr & SR_SRWD)
+ return 0;
+ }
+ }
+
+ printk("spi_generic %s() : Waiting for Ready Failed\n", __func__);
+ return 1;
+}
+
+
+
+int
+spi_generic_erase(struct map_info *map, unsigned long sect_addr)
+{
+ struct spi_flash_private *priv=map->fldrv_priv;
+ int bank = map->map_priv_1;
+ struct spi_ctrl_driver *ctrl_drv = priv->ctrl_drv;
+ int retval;
+ unsigned char command[5];
+ int cmd_size;
+ u8 address32 = priv->address32;
+ //unsigned long flash_size = priv->size;
+ u8 had_switch_die = 0;
+ u8 pwr_up_mode = 0;
+
+ down(&priv->chip_drv->lock);
+
+
+ /* Wait until finished previous command. */
+ if (wait_till_ready(bank,ctrl_drv))
+ {
+ up(&priv->chip_drv->lock);
+ return -1;
+ }
+
+ if (address32 == ADDRESS_DIE_LO3_HI4_BYTE) {
+ if(sect_addr>=ADDR_32MB){
+ spi_generic_select_die( bank, 1,ctrl_drv);
+ had_switch_die = 1;
+ sect_addr-=ADDR_32MB;
+ }
+ }
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940)
+ {
+ u8 reg_data;
+
+ command[0] = 0x15; /* Read Status Register S23 ~ S16 */
+ cmd_size = 1;
+ retval = ctrl_drv->spi_transfer(bank,command, cmd_size ,SPI_READ, ®_data, 1);
+ pwr_up_mode = (reg_data & 0x2)>>1; /* S17(ADP) field */
+ }
+
+ /* Logic for 4 byte address mode Enter */
+ if ( ((sect_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE )||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || pwr_up_mode)
+ {
+ retval = enter_4byte_addr_mode(bank, ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Unable to enter 4 byte address mode\n");
+ if(had_switch_die == 1)
+ {
+ spi_generic_select_die( bank, 0,ctrl_drv);
+ }
+ up(&priv->chip_drv->lock);
+ return spi_error(retval);
+ }
+ }
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940) w25q256_force_extended_address(bank, ctrl_drv);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA) || (ractrends_spiflash_flash_id[bank] == 0x00C21A20))
+ spi_generic_extended_address(bank, SPI_WRITE, (sect_addr & 0xFF000000) >> 24, ctrl_drv);
+
+ if ( (((sect_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || (address32 == ADDRESS_4BYTE)) || pwr_up_mode)
+ {
+ /* Set up command buffer. */
+ command[0] = OPCODE_SE;
+ if (ractrends_spiflash_flash_id[bank] == 0x00011902) command[0] = 0xDC; // ERASE command in 4byte mode [spansion only]
+ if (address32 == ADDRESS_DIE_LO3_HI4_BYTE) command[0] = 0xDC; // ERASE command in 4byte mode
+ command[1] = sect_addr >> 24;
+ command[2] = sect_addr >> 16;
+ command[3] = sect_addr >> 8;
+ command[4] = sect_addr;
+
+ cmd_size = 5;
+ }
+ else {
+ /* Set up command buffer. */
+ command[0] = OPCODE_SE;
+ command[1] = sect_addr >> 16;
+ command[2] = sect_addr >> 8;
+ command[3] = sect_addr;
+
+ cmd_size = 4;
+ }
+
+ /* Issue Controller Transfer Routine */
+ spi_generic_write_enable(bank,ctrl_drv); /* Send write enable */
+ retval = ctrl_drv->spi_transfer(bank,command, cmd_size ,SPI_NONE, NULL, 0);
+ spi_generic_write_disable(bank,ctrl_drv); /* Send write disable */
+
+ if (ractrends_spiflash_flash_id[bank] == 0x002020BA || ractrends_spiflash_flash_id[bank] == 0x002021BA)
+ {
+ /* requires the read flag status with at latest one byte. */
+ if (require_read_flag_status(bank,ctrl_drv))
+ {
+ up(&priv->chip_drv->lock);
+ return -1;
+ }
+ }
+
+ if (retval < 0)
+ {
+ //if 4 byte mode exit
+ if ( ((sect_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || pwr_up_mode)
+ {
+ retval = exit_4byte_addr_mode(bank, ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Unable to exit 4 byte address mode\n");
+ }
+ }
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940) w25q256_force_extended_address(bank, ctrl_drv);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA) || (ractrends_spiflash_flash_id[bank] == 0x00C21A20))
+ spi_generic_extended_address(bank, SPI_WRITE, 0x00, ctrl_drv);
+
+ if(had_switch_die == 1)
+ {
+ spi_generic_select_die( bank, 0,ctrl_drv);
+ }
+ up(&priv->chip_drv->lock);
+ return spi_error(retval);
+ }
+
+ if ( ((sect_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || pwr_up_mode)
+ {
+ retval = exit_4byte_addr_mode(bank, ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Unable to exit 4 byte address mode\n");
+ }
+ }
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940) w25q256_force_extended_address(bank, ctrl_drv);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA) || (ractrends_spiflash_flash_id[bank] == 0x00C21A20))
+ spi_generic_extended_address(bank, SPI_WRITE, 0x00, ctrl_drv);
+
+ if(had_switch_die == 1)
+ {
+ spi_generic_select_die( bank, 0,ctrl_drv);
+ }
+ up(&priv->chip_drv->lock);
+ return retval;
+}
+
+
+int
+spi_generic_read(struct map_info *map, loff_t addr, size_t bytes, unsigned char *buff)
+{
+ struct spi_flash_private *priv=map->fldrv_priv;
+ int bank = map->map_priv_1;
+ struct spi_ctrl_driver *ctrl_drv = priv->ctrl_drv;
+ int retval = 0;
+ size_t transfer;
+ unsigned char command[6];
+ int cmd_size;
+ int (*readfn)(int bank,unsigned char *,int , SPI_DIR, unsigned char *, unsigned long); //unsigned long);
+ int end_addr = (addr+bytes-1);
+ u8 address32 = priv->address32;
+ //unsigned long flash_size = priv->size;
+ u8 had_switch_die = 0;
+ u8 pwr_up_mode = 0;
+
+ /* Some time zero bytes length are sent */
+ if (bytes==0)
+ return 0;
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940)
+ {
+ u8 reg_data;
+
+ command[0] = 0x15; /* Read Status Register S23 ~ S16 */
+ cmd_size = 1;
+ retval = ctrl_drv->spi_transfer(bank,command, cmd_size ,SPI_READ, ®_data, 1);
+ pwr_up_mode = (reg_data & 0x2)>>1; /* S17(ADP) field */
+ }
+
+ if (address32 == ADDRESS_DIE_LO3_HI4_BYTE)
+ {
+ if (addr < ADDR_32MB && end_addr >= ADDR_32MB)
+ {
+ int ErrorCode;
+ transfer = (ADDR_32MB - addr);
+ ErrorCode = spi_generic_read(map, addr, transfer, buff);
+ if (ErrorCode != 0) return ErrorCode;
+
+ //fix address
+ bytes-=transfer;
+ addr+=transfer;
+ buff+=transfer;
+
+ end_addr = (addr+bytes-1);
+ if (bytes==0) return 0;
+ }
+ }
+ down(&priv->chip_drv->lock);
+
+
+
+ /* Wait until finished previous command. */
+ if (wait_till_ready(bank,ctrl_drv))
+ {
+ up(&priv->chip_drv->lock);
+ return -1;
+ }
+
+ if (address32 == ADDRESS_DIE_LO3_HI4_BYTE){
+ if(addr >= ADDR_32MB){
+ spi_generic_select_die( bank, 1,ctrl_drv);
+ had_switch_die = 1;
+ addr-=ADDR_32MB;
+ end_addr = (addr+bytes-1);
+ }
+ }
+
+ if (ctrl_drv->spi_burst_read)
+ readfn = ctrl_drv->spi_burst_read;
+ else
+ readfn = ctrl_drv->spi_transfer;
+
+ transfer=bytes;
+
+
+ /* Logic for 4 byte address mode Enter */
+ if ( (( end_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE )||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || pwr_up_mode)
+ {
+ //printk ("Trying to enter 4 byte mode\n");
+ retval = enter_4byte_addr_mode(bank, ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Unable to enter 4 byte address mode\n");
+ if(had_switch_die == 1)
+ {
+ spi_generic_select_die( bank, 0,ctrl_drv);
+ }
+ up(&priv->chip_drv->lock);
+ return spi_error(retval);
+ }
+ }
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940) w25q256_force_extended_address(bank, ctrl_drv);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA) || (ractrends_spiflash_flash_id[bank] == 0x00C21A20))
+ spi_generic_extended_address(bank, SPI_WRITE, (addr & 0xFF000000) >> 24, ctrl_drv);
+
+ while (bytes)
+ {
+ if (ctrl_drv->spi_burst_read)
+ transfer=bytes;
+ else
+ {
+ transfer=ctrl_drv->max_read;
+ if (transfer > bytes)
+ transfer = bytes;
+ }
+
+ if (!ctrl_drv->fast_read)
+ {
+ if ( ((( end_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || (address32 == ADDRESS_4BYTE)) || pwr_up_mode )
+ {
+ /* Set up command buffer. */ /* Normal Read */
+ command[0] = OPCODE_READ;
+ if (ractrends_spiflash_flash_id[bank] == 0x00011902) command[0] = 0x13; // READ command in 4byte mode [spansion only]
+ if (address32 == ADDRESS_DIE_LO3_HI4_BYTE) command[0] = 0x13; // READ command in 4byte mode
+ command[1] = addr >> 24;
+ command[2] = addr >> 16;
+ command[3] = addr >> 8;
+ command[4] = addr;
+
+ cmd_size = 5;
+ }
+ else {
+
+ /* Set up command buffer. */ /* Normal Read */
+ command[0] = OPCODE_READ;
+ command[1] = addr >> 16;
+ command[2] = addr >> 8;
+ command[3] = addr;
+
+ cmd_size = 4;
+ }
+ /* Issue Controller Transfer Routine */
+ retval = (*readfn)(bank,command, cmd_size ,SPI_READ, buff, (unsigned long)transfer);
+ }
+ else if (ctrl_drv->fast_read == 1) // Need to check Fast Read in 4 byte address mode
+ {
+ if ( ((( end_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || (address32 == ADDRESS_4BYTE)) || pwr_up_mode )
+ {
+ /* Set up command buffer. */ /* Fast Read */
+ command[0] = OPCODE_FAST_READ;
+ if (ractrends_spiflash_flash_id[bank] == 0x00011902) command[0] = 0x0C; // FAST_READ command in 4byte mode [spansion only]
+ if (address32 == ADDRESS_DIE_LO3_HI4_BYTE) command[0] = 0x0C; // FAST_READ command in 4byte mode
+ command[1] = addr >> 24;
+ command[2] = addr >> 16;
+ command[3] = addr >> 8;
+ command[4] = addr;
+ command[5] = 0; /* dummy data */
+
+ cmd_size = 6;
+ }
+ else
+ {
+ /* Set up command buffer. */ /* Fast Read */
+ command[0] = OPCODE_FAST_READ;
+ command[1] = addr >> 16;
+ command[2] = addr >> 8;
+ command[3] = addr;
+ command[4] = 0; /* dummy data */
+
+ cmd_size = 5;
+ }
+ /* Issue Controller Transfer Routine */
+ retval = (*readfn)(bank,command, cmd_size ,SPI_READ, buff, (unsigned long)transfer);
+ }
+ else if (ctrl_drv->fast_read == 2) // Need to check Dual Read in 4 byte address mode
+ {
+ if ( ((( end_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || (address32 == ADDRESS_4BYTE)) || pwr_up_mode )
+ {
+ /* Set up command buffer. */ /* Dual Read */
+ command[0] = OPCODE_DREAD;
+ command[1] = addr >> 24;
+ command[2] = addr >> 16;
+ command[3] = addr >> 8;
+ command[4] = addr;
+ command[5] = 0; /* dummy data */
+
+ cmd_size = 6;
+ }
+ else
+ {
+ /* Set up command buffer. */ /* Dual Read */
+ command[0] = OPCODE_DREAD;
+ command[1] = addr >> 16;
+ command[2] = addr >> 8;
+ command[3] = addr;
+ command[4] = 0; /* dummy data */
+
+ cmd_size = 5;
+ }
+ /* Issue Controller Transfer Routine */
+ retval = (*readfn)(bank,command, cmd_size ,SPI_READ, buff, (unsigned long)transfer);
+ }
+ else if (ctrl_drv->fast_read == 3) // Need to check 2xI/O Read in 4 byte address mode
+ {
+ if ( ((( end_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || (address32 == ADDRESS_4BYTE)) || pwr_up_mode )
+ {
+ /* Set up command buffer. */ /* 2xI/O Read */
+ command[0] = OPCODE_2READ;
+ command[1] = addr >> 24;
+ command[2] = addr >> 16;
+ command[3] = addr >> 8;
+ command[4] = addr;
+ command[5] = 0; /* dummy data */
+
+ cmd_size = 6;
+ }
+ else
+ {
+ /* Set up command buffer. */ /* 2xI/O Read */
+ command[0] = OPCODE_2READ;
+ command[1] = addr >> 16;
+ command[2] = addr >> 8;
+ command[3] = addr;
+ command[4] = 0; /* dummy data */
+
+ cmd_size = 5;
+ }
+ /* Issue Controller Transfer Routine */
+ retval = (*readfn)(bank,command, cmd_size ,SPI_READ, buff, (unsigned long)transfer);
+ }
+
+ if (retval < 0)
+ {
+ //if 4 byte mode, exit
+ if ( (( end_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || pwr_up_mode)
+ {
+ retval = exit_4byte_addr_mode(bank, ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Unable to exit 4 byte address mode\n");
+ }
+ }
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940) w25q256_force_extended_address(bank, ctrl_drv);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA) || (ractrends_spiflash_flash_id[bank] == 0x00C21A20))
+ spi_generic_extended_address(bank, SPI_WRITE, 0x00, ctrl_drv);
+
+ if(had_switch_die == 1)
+ {
+ spi_generic_select_die( bank, 0,ctrl_drv);
+ }
+ up(&priv->chip_drv->lock);
+ return spi_error(retval);
+ }
+
+ bytes-=transfer;
+ addr+=transfer;
+ buff+=transfer;
+ }
+
+ //if 4 byte mode exit
+ if ( (( end_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || pwr_up_mode)
+ {
+ //printk ("Trying to exit 4 byte mode\n");
+ retval = exit_4byte_addr_mode(bank, ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Unable to exit 4 byte address mode\n");
+ }
+ }
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940) w25q256_force_extended_address(bank, ctrl_drv);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA) || (ractrends_spiflash_flash_id[bank] == 0x00C21A20))
+ spi_generic_extended_address(bank, SPI_WRITE, 0x00, ctrl_drv);
+
+ if(had_switch_die == 1)
+ {
+ spi_generic_select_die( bank, 0,ctrl_drv);
+ }
+ up(&priv->chip_drv->lock);
+ return 0;
+}
+
+
+int
+spi_generic_write(struct map_info *map, loff_t addr, size_t bytes, const unsigned char *buff)
+{
+ struct spi_flash_private *priv=map->fldrv_priv;
+ int bank = map->map_priv_1;
+ struct spi_ctrl_driver *ctrl_drv = priv->ctrl_drv;
+
+ int retval;
+ unsigned char command[5];
+ size_t transfer;
+ int cmd_size = 0;
+ int end_addr = (addr+bytes-1);
+ u8 address32 = priv->address32;
+ //unsigned long flash_size = priv->size;
+ u8 had_switch_die = 0;
+ u8 pwr_up_mode = 0;
+
+ /* Some time zero bytes length are sent */
+ if (bytes==0)
+ return 0;
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940)
+ {
+ u8 reg_data;
+
+ command[0] = 0x15; /* Read Status Register S23 ~ S16 */
+ cmd_size = 1;
+ retval = ctrl_drv->spi_transfer(bank,command, cmd_size ,SPI_READ, ®_data, 1);
+ pwr_up_mode = (reg_data & 0x2)>>1; /* S17(ADP) field */
+ }
+
+ if (address32 == ADDRESS_DIE_LO3_HI4_BYTE)
+ {
+ if (addr < ADDR_32MB && end_addr >= ADDR_32MB)
+ {
+ int ErrorCode;
+ transfer = (ADDR_32MB - addr);
+ ErrorCode = spi_generic_write(map, addr, transfer, buff);
+ if (ErrorCode != 0) return ErrorCode;
+
+ //fix address
+ bytes-=transfer;
+ addr+=transfer;
+ buff+=transfer;
+
+ end_addr = (addr+bytes-1);
+ if (bytes==0) return 0;
+ }
+ }
+
+ down(&priv->chip_drv->lock);
+
+ if (address32 == ADDRESS_DIE_LO3_HI4_BYTE){
+ if(addr >= ADDR_32MB){
+ spi_generic_select_die( bank, 1,ctrl_drv);
+ had_switch_die = 1;
+ addr-=ADDR_32MB;
+ end_addr = (addr+bytes-1);
+ }
+ }
+
+ /* Logic for 4 byte address mode Enter */
+ if ( (( end_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || pwr_up_mode)
+ {
+ retval = enter_4byte_addr_mode(bank, ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Unable to enter 4 byte address mode\n");
+ if(had_switch_die == 1)
+ {
+ spi_generic_select_die( bank, 0,ctrl_drv);
+ }
+ up(&priv->chip_drv->lock);
+ return spi_error(retval);
+ }
+ }
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940) w25q256_force_extended_address(bank, ctrl_drv);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA) || (ractrends_spiflash_flash_id[bank] == 0x00C21A20))
+ spi_generic_extended_address(bank, SPI_WRITE, (addr & 0xFF000000) >> 24, ctrl_drv);
+
+ while (bytes)
+ {
+ /* Wait until finished previous command. */
+ if (wait_till_ready(bank,ctrl_drv))
+ {
+ if(had_switch_die == 1)
+ {
+ spi_generic_select_die( bank, 0,ctrl_drv);
+ }
+ up(&priv->chip_drv->lock);
+ return -1;
+ }
+
+ transfer = PROGRAM_PAGE_SIZE;
+ if (bytes < transfer)
+ transfer = bytes;
+
+ if (!ctrl_drv->fast_write)
+ {
+ if ( (((end_addr >= ADDR_16MB) && (address32 == ADDRESS_LO3_HI4_BYTE)) || (address32 == ADDRESS_4BYTE)) || pwr_up_mode)
+ {
+ /* Set up command buffer. */
+ command[0] = OPCODE_PP;
+ if (ractrends_spiflash_flash_id[bank] == 0x00011902) command[0] = 0x12; // PROGRAM command in 4byte mode [spansion only]
+ if (address32 == ADDRESS_DIE_LO3_HI4_BYTE) command[0] = 0x12; // PROGRAM command in 4byte mode
+ command[1] = addr >> 24;
+ command[2] = addr >> 16;
+ command[3] = addr >> 8;
+ command[4] = addr;
+ cmd_size = 5;
+ }
+ else {
+ /* Set up command buffer. */
+ command[0] = OPCODE_PP;
+ command[1] = addr >> 16;
+ command[2] = addr >> 8;
+ command[3] = addr;
+ cmd_size = 4;
+ }
+ }
+
+ /* Issue Controller Transfer Routine */
+ spi_generic_write_enable(bank,ctrl_drv); /* Send write enable */
+ retval = ctrl_drv->spi_transfer(bank,command,cmd_size ,SPI_WRITE,
+ (unsigned char *)buff, transfer);
+ spi_generic_write_disable(bank,ctrl_drv); /* Send write disable */
+
+ if (ractrends_spiflash_flash_id[bank] == 0x002020BA || ractrends_spiflash_flash_id[bank] == 0x002021BA)
+ {
+ /* requires the read flag status with at latest one byte. */
+ if (require_read_flag_status(bank,ctrl_drv))
+ {
+ up(&priv->chip_drv->lock);
+ return -1;
+ }
+ }
+
+ if (retval < 0)
+ {
+ //if 4 byte mode exit
+ if ( (( end_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || pwr_up_mode)
+ {
+ retval = exit_4byte_addr_mode(bank, ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Unable to exit 4 byte address mode\n");
+ }
+ }
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940) w25q256_force_extended_address(bank, ctrl_drv);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA) || (ractrends_spiflash_flash_id[bank] == 0x00C21A20))
+ spi_generic_extended_address(bank, SPI_WRITE, 0x00, ctrl_drv);
+
+ if(had_switch_die == 1)
+ {
+ spi_generic_select_die( bank, 0,ctrl_drv);
+ }
+ up(&priv->chip_drv->lock);
+ return spi_error(retval);
+ }
+ addr+=(transfer-retval);
+ buff+=(transfer-retval);
+ bytes-=(transfer-retval);
+ }
+
+ //if 4 byte mode exit
+ if ( (( end_addr >= ADDR_16MB) && ((address32 == ADDRESS_LO3_HI4_BYTE)||(address32 == ADDRESS_DIE_LO3_HI4_BYTE))) || pwr_up_mode)
+ {
+ retval = exit_4byte_addr_mode(bank, ctrl_drv);
+ if (retval < 0)
+ {
+ printk ("Unable to exit 4 byte address mode\n");
+ }
+ }
+
+ if (ractrends_spiflash_flash_id[bank] == 0x00EF1940) w25q256_force_extended_address(bank, ctrl_drv);
+ if ((ractrends_spiflash_flash_id[bank] == 0x002020BA) || (ractrends_spiflash_flash_id[bank] == 0x002021BA) || (ractrends_spiflash_flash_id[bank] == 0x00C21A20))
+ spi_generic_extended_address(bank, SPI_WRITE, 0x00, ctrl_drv);
+
+ if(had_switch_die == 1)
+ {
+ spi_generic_select_die( bank, 0,ctrl_drv);
+ }
+ up(&priv->chip_drv->lock);
+ return 0;
+}
+
+/***********************************************************************************/
+extern int spi_verbose;
+int
+spi_generic_probe(int bank,struct spi_ctrl_driver *ctrl_drv, struct spi_flash_info *chip_info,
+ char *spi_name,struct spi_flash_info *spi_list, int spi_list_len)
+{
+ int retval;
+ u32 val;
+ int i;
+ u16 opread;
+ u16 opwrite;
+ u8 code = OPCODE_RDID;
+ //int address_mode = 0;
+
+ if (spi_verbose == 2)
+ printk("SPI: probing for %s devices ...\n",spi_name);
+
+ /* Send write enable */
+ retval =spi_generic_write_enable(bank,ctrl_drv);
+ if (retval < 0)
+ return -1;
+
+ /* Issue Controller Transfer Routine */
+ val = 0;
+ retval = ctrl_drv->spi_transfer(bank,&code, 1,SPI_READ,(unsigned char *)&val, 3);
+ val &= 0x00FFFFFF;
+
+ if (retval < 0)
+ {
+ spi_error(retval);
+ return -1;
+ }
+
+ /* Send write disable */
+ retval = spi_generic_write_disable(bank,ctrl_drv);
+ if (retval < 0)
+ return -1;
+
+ /* Match the ID against the table entries */
+ for (i = 0; i < spi_list_len; i++)
+ {
+ if ((spi_list[i].mfr_id == ((val)& 0xFF)) && (spi_list[i].dev_id == ((val >> 8)& 0xFFFF)))
+ {
+ /* Check Operation Mode */
+ //for Read Operation
+ opread = (spi_list[i].operationmode & 0xFFFF);
+ opread &= ctrl_drv->operation_mode_mask;
+ if (opread > 0x7)
+ {
+ ctrl_drv->fast_read = 3;
+ }
+ else if ((0x3 < opread) && (opread <= 0x7))
+ {
+ ctrl_drv->fast_read = 2;
+ }
+ else if ((0x1 < opread) && (opread <= 0x3))
+ {
+ ctrl_drv->fast_read = 1;
+ }
+ else if (opread <= 0x1)
+ {
+ ctrl_drv->fast_read = 0;
+ }
+
+ //for Write Operation
+ opwrite = (spi_list[i].operationmode >> 16);
+ opwrite &= (ctrl_drv->operation_mode_mask >> 16);
+ if (opwrite <= 0x1)
+ {
+ ctrl_drv->fast_write = 0;
+ }
+
+ break;
+ }
+ }
+
+ if (i == spi_list_len)
+ {
+// if (spi_verbose == 2)
+// printk("%s : Unrecognized ID (0x%x) got \n",spi_name,val);
+ return -1;
+ }
+ memcpy(chip_info,&spi_list[i],sizeof(struct spi_flash_info));
+
+ if (spi_verbose > 0)
+ printk(KERN_INFO"Found SPI Chip %s \n",spi_list[i].name);
+
+ return 0;
+
+}
+
+EXPORT_SYMBOL(spi_generic_probe);
+EXPORT_SYMBOL(spi_generic_erase);
+EXPORT_SYMBOL(spi_generic_read);
+EXPORT_SYMBOL(spi_generic_write);
+EXPORT_SYMBOL(spi_generic_write_disable);
+EXPORT_SYMBOL(spi_generic_write_enable);
+EXPORT_SYMBOL(spi_generic_read_status);
+EXPORT_SYMBOL(spi_generic_write_status);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("MTD SPI driver for Generic SPI flash chips");
+
+#endif
diff --git a/drivers/mtd/spichips/intels33.c b/drivers/mtd/spichips/intels33.c
new file mode 100644
index 0000000..6900319
--- /dev/null
+++ b/drivers/mtd/spichips/intels33.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifdef __UBOOT__
+#include <common.h>
+#endif
+#include "spiflash.h"
+#ifdef CFG_FLASH_SPI_DRIVER
+
+/* Name, ID1, ID2 , Size, Clock, Erase regions, address mode,{ Offset, Erase Size, Erase Block Count } */
+/* address mode: 0x00 -3 byte address
+ 0x01 - 4 byte address
+ 0x02 - Low byte: 3 byte address, High byte: 4 byte address*/
+static struct spi_flash_info s33_data [] =
+{
+ /* Intel S33 64 K Sectors */
+ { "Intel S33 16Mb" , 0x89, 0x1189, 0x00010001, 0x200000 , 68 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 32 },} },
+ { "Intel S33 32Mb" , 0x89, 0x1289, 0x00010001, 0x400000 , 68 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 64 },} },
+ { "Intel S33 64Mb" , 0x89, 0x1389, 0x00010001, 0x800000 , 68 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 128 },} },
+};
+
+
+static
+int
+s33_probe(int bank,struct spi_ctrl_driver *ctrl_drv, struct spi_flash_info *chip_info)
+{
+ int retval;
+ retval = spi_generic_probe(bank,ctrl_drv,chip_info,"intel s33",
+ s33_data,ARRAY_SIZE(s33_data));
+
+ if (retval == -1)
+ return retval;
+
+ /* UnProctect all sectors */
+ /* SRWD=0 (Bit 7) BP0,BP1,BP2 = 0 (Bit 2,3,4) */
+ if (spi_generic_write_status(bank,ctrl_drv,0x0) < 0)
+ printk("intel s33: Unable to Unprotect all sectors\n");
+ return retval;
+}
+
+struct spi_chip_driver s33_driver =
+{
+ .name = "intel s33",
+ .module = THIS_MODULE,
+ .probe = s33_probe,
+ .erase_sector = spi_generic_erase,
+ .read_bytes = spi_generic_read,
+ .write_bytes = spi_generic_write,
+};
+
+int
+s33_init(void)
+{
+ sema_init(&s33_driver.lock, 1);
+#ifdef __UBOOT__ /* MIPS */
+ s33_driver.probe = s33_probe;
+ s33_driver.erase_sector = spi_generic_erase;
+ s33_driver.read_bytes = spi_generic_read;
+ s33_driver.write_bytes = spi_generic_write;
+#endif
+ register_spi_chip_driver(&s33_driver);
+ return 0;
+}
+
+void
+s33_exit(void)
+{
+ sema_init(&s33_driver.lock, 1);
+ unregister_spi_chip_driver(&s33_driver);
+ return;
+}
+
+module_init(s33_init);
+module_exit(s33_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("MTD SPI driver for Intel S33 flash chips");
+
+#endif
diff --git a/drivers/mtd/spichips/m25pxx.c b/drivers/mtd/spichips/m25pxx.c
new file mode 100644
index 0000000..448fe06
--- /dev/null
+++ b/drivers/mtd/spichips/m25pxx.c
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifdef __UBOOT__
+#include <common.h>
+#endif
+#include "spiflash.h"
+#ifdef CFG_FLASH_SPI_DRIVER
+
+/* Name, ID1, ID2 , Size, Clock, Erase regions, address mode,{ Offset, Erase Size, Erase Block Count } */
+/* address mode: 0x00 -3 byte address
+ 0x01 - 4 byte address
+ 0x02 - Low byte: 3 byte address, High byte: 4 byte address*/
+static struct spi_flash_info m25pxx_data [] =
+{
+ /* ST Micro 32K Sectors */
+ { "ST Micro m25p05A" , 0x20, 0x1020, 0x00010001, 0x010000 , 50 * 1000000, 1, 0x00, {{ 0, 32 * 1024, 2 },} },
+ { "ST Micro m25p10A" , 0x20, 0x1120, 0x00010001, 0x020000 , 50 * 1000000, 1, 0x00, {{ 0, 32 * 1024, 4 },} },
+
+ /* ST Micro 64 K Sectors */
+ { "ST Micro m25p20" , 0x20, 0x1220, 0x00010001, 0x040000 , 75 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 4 },} },
+ { "ST Micro m25p40" , 0x20, 0x1320, 0x00010001, 0x080000 , 75 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 8 },} },
+ { "ST Micro m25p80" , 0x20, 0x1420, 0x00010001, 0x100000 , 75 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 16 },} },
+ { "ST Micro m25p16" , 0x20, 0x1520, 0x00010001, 0x200000 , 75 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 32 },} },
+ { "ST Micro m25p32" , 0x20, 0x1620, 0x00010001, 0x400000 , 75 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 64 },} },
+ { "ST Micro m25p64" , 0x20, 0x1720, 0x00010001, 0x800000 , 75 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 128 },} },
+ { "ST Micro m25px64" , 0x20, 0x1771, 0x00010001, 0x800000 , 75 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 128 },} },
+
+ /* ST Micro 256K Sectors */
+ { "ST Micro m25p128" , 0x20, 0x1820, 0x00010001, 0x1000000, 50 * 1000000, 1, 0x00, {{ 0, 256 * 1024, 64 },} },
+
+ /* ST Micro 64 K Sectors, 25MHz speed */
+ { "ST Micro m45p20" , 0x20, 0x1240, 0x00010001, 0x040000 , 25 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 4 },} },
+ { "ST Micro m45p40" , 0x20, 0x1340, 0x00010001, 0x080000 , 25 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 8 },} },
+ { "ST Micro m45p80" , 0x20, 0x1440, 0x00010001, 0x100000 , 25 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 16 },} },
+ { "ST Micro m45p16" , 0x20, 0x1540, 0x00010001, 0x200000 , 25 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 32 },} },
+ { "ST Micro m45p32" , 0x20, 0x1640, 0x00010001, 0x400000 , 25 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 64 },} },
+ { "ST Micro m45p64" , 0x20, 0x1740, 0x00010001, 0x800000 , 25 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 128 },} },
+
+};
+
+
+static
+int
+m25pxx_probe(int bank,struct spi_ctrl_driver *ctrl_drv, struct spi_flash_info *chip_info)
+{
+ int retval;
+ retval = spi_generic_probe(bank,ctrl_drv,chip_info,"m25pxx",
+ m25pxx_data,ARRAY_SIZE(m25pxx_data));
+
+ if (retval == -1)
+ return retval;
+
+ /* UnProctect all sectors */
+ /* SRWD=0 (Bit 7) BP0,BP1,BP2 = 0 (Bit 2,3,4) */
+ if (spi_generic_write_status(bank,ctrl_drv,0x0) < 0)
+ printk("m25pxx: Unable to Unprotect all sectors\n");
+
+ return retval;
+}
+
+struct spi_chip_driver m25pxx_driver =
+{
+ .name = "m25pxx",
+ .module = THIS_MODULE,
+ .probe = m25pxx_probe,
+ .erase_sector = spi_generic_erase,
+ .read_bytes = spi_generic_read,
+ .write_bytes = spi_generic_write,
+};
+
+
+
+int
+m25pxx_init(void)
+{
+ sema_init(&m25pxx_driver.lock, 1);
+#ifdef __UBOOT__ /* MIPS */
+ m25pxx_driver.probe = m25pxx_probe;
+ m25pxx_driver.erase_sector = spi_generic_erase;
+ m25pxx_driver.read_bytes = spi_generic_read;
+ m25pxx_driver.write_bytes = spi_generic_write;
+#endif
+ register_spi_chip_driver(&m25pxx_driver);
+ return 0;
+}
+
+
+void
+m25pxx_exit(void)
+{
+ sema_init(&m25pxx_driver.lock, 1);
+ unregister_spi_chip_driver(&m25pxx_driver);
+ return;
+}
+
+
+module_init(m25pxx_init);
+module_exit(m25pxx_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("MTD SPI driver for ST M25Pxx flash chips");
+
+#endif
diff --git a/drivers/mtd/spichips/macronix.c b/drivers/mtd/spichips/macronix.c
new file mode 100644
index 0000000..176d101
--- /dev/null
+++ b/drivers/mtd/spichips/macronix.c
@@ -0,0 +1,208 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifdef __UBOOT__
+#include <common.h>
+#endif
+#include "spiflash.h"
+#ifdef CFG_FLASH_SPI_DRIVER
+
+#define CMD_MX25XX_RDSCUR 0x2B /* Read security register */
+#define CMD_MX25XX_RDCR 0x15 /* Read configuration register */
+
+/* Security register */
+#define SCUR_BIT2 0x04
+
+/* Configuration register */
+#define CR_BIT5 0x20
+
+#define ADDRESS_3BYTE 0x00
+#define ADDRESS_4BYTE 0x01
+#define ADDRESS_LO3_HI4_BYTE 0x02
+#define MX25L25x35E_MFR_ID 0xC2
+#define MX25L25x35E_DEV_ID 0x1920
+
+
+/* Name, ID1, ID2 , Size, Clock, Erase regions, address mode,{ Offset, Erase Size, Erase Block Count } */
+/* address mode: 0x00 -3 byte address
+ 0x01 - 4 byte address
+ 0x02 - Low byte: 3 byte address, High byte: 4 byte address*/
+static struct spi_flash_info macronix_data [] =
+{
+ /* Macronix 64 K Sectors */
+ { "Macronix MX25L1605D" , 0xC2, 0x1520, 0x0001000B, 0x200000 , 66 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 32 },} },
+ { "Macronix MX25L3205D" , 0xC2, 0x1620, 0x0001000B, 0x400000 , 66 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 64 },} },
+ { "Macronix MX25L6405D" , 0xC2, 0x1720, 0x0001000B, 0x800000 , 66 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 128 },} },
+ { "Macronix MX25L12805D", 0xC2, 0x1820, 0x00010001, 0x1000000, 50 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 256 },} },
+ { "Macronix MX25L25635E", 0xC2, 0x1920, 0x0001000F, 0x2000000, 50 * 1000000, 1, 0x02, {{ 0, 64 * 1024, 512 },} },
+ { "Macronix MX25L25735E", 0xC2, 0x1920, 0x0001000F, 0x2000000, 50 * 1000000, 1, 0x01, {{ 0, 64 * 1024, 512 },} },
+ { "Macronix MX66L51235F", 0xC2, 0x1A20, 0x0001000F, 0x4000000, 50 * 1000000, 1, 0x02, {{ 0, 64 * 1024, 1024 },} },
+ { "EON EN25QH256", 0x1C, 0x1970, 0x0001000F, 0x2000000, 50 * 1000000, 1, 0x02, {{ 0, 64 * 1024, 512 },} },
+
+};
+
+/* to dinstinguish between MX25L25635/MX25L25735 E and F type */
+static int read_security_register(int bank, struct spi_ctrl_driver *ctrl_drv)
+{
+ u8 code = CMD_MX25XX_RDSCUR;
+ int retval;
+ unsigned char scur_reg;
+
+ /* Issue Controller Transfer Routine*/
+ retval = ctrl_drv->spi_transfer(bank,&code, 1,SPI_READ,&scur_reg, 1);
+ if (retval < 0)
+ {
+ printk ("Could not read security register\n");
+ return -1;
+
+ }
+
+ /* 0x00 - 3 byte mode
+ 0x04 - 4 byte mode */
+ scur_reg &= SCUR_BIT2;
+
+ if(scur_reg == 0x04)
+ return ADDRESS_4BYTE; // MX25L25735E
+ else
+ return ADDRESS_LO3_HI4_BYTE; // MX25L25635E, MX25L25635F, MX25L25735F
+
+ return 0;
+}
+
+/* to dinstinguish MX25L25635/MX25L25735 F type */
+static int read_configuration_register(int bank, struct spi_ctrl_driver *ctrl_drv)
+{
+ u8 code = CMD_MX25XX_RDCR;
+ int retval;
+ unsigned char conf_reg;
+
+ /* Issue Controller Transfer Routine */
+ retval = ctrl_drv->spi_transfer(bank,&code,1,SPI_READ,&conf_reg,1);
+ if (retval < 0)
+ {
+ printk ("Could not read configuration register\n");
+ return -1;
+ }
+
+ if (conf_reg == 0xFF) conf_reg = 0x00; // invalid value (maybe unsupported the RDCR command)
+
+ /* 0x00 - 3 byte mode
+ 0x20 - 4 byte mode */
+ conf_reg &= CR_BIT5;
+
+ if(conf_reg == CR_BIT5)
+ return ADDRESS_4BYTE; // MX25L25735F
+ else
+ return ADDRESS_LO3_HI4_BYTE; // MX25L25635E or MX25L25635F
+
+ return 0;
+}
+
+static
+int
+macronix_probe(int bank,struct spi_ctrl_driver *ctrl_drv, struct spi_flash_info *chip_info)
+{
+ int retval;
+ int address_mode = 0;
+ int i=0;
+
+ retval = spi_generic_probe(bank,ctrl_drv,chip_info,"macronix",
+ macronix_data,ARRAY_SIZE(macronix_data));
+
+ if (retval == -1)
+ return retval;
+
+ /* MX25L25635E, MX25L25735E, MX25L25635F, MX25L25735F - the same ID code */
+ if((chip_info->mfr_id == MX25L25x35E_MFR_ID) && (chip_info->dev_id == MX25L25x35E_DEV_ID))
+ {
+ address_mode = read_security_register(bank, ctrl_drv);
+ if (address_mode == ADDRESS_LO3_HI4_BYTE) address_mode = read_configuration_register(bank, ctrl_drv);
+
+ if (address_mode == -1)
+ return address_mode;
+
+ if(chip_info->address32 != address_mode)
+ {
+ memset(chip_info,0,sizeof(struct spi_flash_info));
+ for (i = 0; i < (ARRAY_SIZE(macronix_data)); i++)
+ {
+ if((macronix_data[i].mfr_id == MX25L25x35E_MFR_ID) && (macronix_data[i].dev_id == MX25L25x35E_DEV_ID))
+ {
+ if(macronix_data[i].address32 == address_mode)
+ {
+
+ break;
+ }
+ }
+
+ }
+ memcpy(chip_info,¯onix_data[i],sizeof(struct spi_flash_info));
+
+ }
+
+ }
+
+ /* UnProctect all sectors */
+ /* SRWD=0 (Bit 7) BP0,BP1,BP2 = 0 (Bit 2,3,4) */
+ if (spi_generic_write_status(bank,ctrl_drv,0x0) < 0)
+ printk("macronix: Unable to Unprotect all sectors\n");
+
+ return retval;
+}
+
+struct spi_chip_driver macronix_driver =
+{
+ .name = "macronix",
+ .module = THIS_MODULE,
+ .probe = macronix_probe,
+ .erase_sector = spi_generic_erase,
+ .read_bytes = spi_generic_read,
+ .write_bytes = spi_generic_write,
+};
+
+int
+macronix_init(void)
+{
+ sema_init(¯onix_driver.lock, 1);
+#ifdef __UBOOT__ /* MIPS */
+ macronix_driver.probe = macronix_probe;
+ macronix_driver.erase_sector = spi_generic_erase;
+ macronix_driver.read_bytes = spi_generic_read;
+ macronix_driver.write_bytes = spi_generic_write;
+#endif
+ register_spi_chip_driver(¯onix_driver);
+ return 0;
+}
+
+void
+macronix_exit(void)
+{
+ sema_init(¯onix_driver.lock, 1);
+ unregister_spi_chip_driver(¯onix_driver);
+ return;
+}
+
+module_init(macronix_init);
+module_exit(macronix_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("MTD SPI driver for Macronix flash chips");
+
+#endif
diff --git a/drivers/mtd/spichips/micron.c b/drivers/mtd/spichips/micron.c
new file mode 100644
index 0000000..e9f44ab
--- /dev/null
+++ b/drivers/mtd/spichips/micron.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2007-2013 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifdef __UBOOT__
+#include <common.h>
+#endif
+#include "spiflash.h"
+#ifdef CFG_FLASH_SPI_DRIVER
+
+/* Name, ID1, ID2 , Size, Clock, Erase regions, address mode, { Offset, Erase Size, Erase Block Count } */
+/* address mode: 0x00 -3 byte address
+ 0x01 - 4 byte address
+ 0x02 - Low byte: 3 byte address, High byte: 4 byte address*/
+
+static struct spi_flash_info micron_data [] =
+{
+ /* Micron 64 K Sectors */
+ { "Micron/Numonyx N25Q00A" , 0x20, 0x21BA, 0x00010001, 0x8000000 , 108 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 2048 },} },
+ { "Micron/Numonyx N25Q512A" , 0x20, 0x20BA, 0x00010001, 0x4000000 , 108 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 1024 },} },
+ { "Micron/Numonyx N25Q256A" , 0x20, 0x19BA, 0x00010001, 0x2000000 , 108 * 1000000, 1, 0x02, {{ 0, 64 * 1024, 512 },} },
+ { "Micron/Numonyx n25q128" , 0x20, 0x18BA, 0x00010001, 0x1000000, 50 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 256 },} },
+};
+
+
+static
+int
+micron_probe(int bank,struct spi_ctrl_driver *ctrl_drv, struct spi_flash_info *chip_info)
+{
+ int retval;
+
+ retval = spi_generic_probe(bank,ctrl_drv,chip_info,"micron",
+ micron_data,ARRAY_SIZE(micron_data));
+
+ if (retval == -1)
+ return retval;
+
+ /* UnProctect all sectors */
+ /* SRWD=0 (Bit 7) BP0,BP1,BP2 = 0 (Bit 2,3,4) */
+ if (spi_generic_write_status(bank,ctrl_drv,0x0) < 0)
+ printk("micron: Unable to Unprotect all sectors\n");
+
+ return retval;
+}
+
+struct spi_chip_driver micron_driver =
+{
+ .name = "micron",
+ .module = THIS_MODULE,
+ .probe = micron_probe,
+ .erase_sector = spi_generic_erase,
+ .read_bytes = spi_generic_read,
+ .write_bytes = spi_generic_write,
+};
+
+
+
+int
+micron_init(void)
+{
+ sema_init(µn_driver.lock,1);
+#ifdef __UBOOT__ /* MIPS */
+ micron_driver.probe = micron_probe;
+ micron_driver.erase_sector = spi_generic_erase;
+ micron_driver.read_bytes = spi_generic_read;
+ micron_driver.write_bytes = spi_generic_write;
+#endif
+ register_spi_chip_driver(µn_driver);
+ return 0;
+}
+
+
+void
+micron_exit(void)
+{
+ sema_init(µn_driver.lock,1);
+ unregister_spi_chip_driver(µn_driver);
+ return;
+}
+
+
+module_init(micron_init);
+module_exit(micron_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("MTD SPI driver for micron flash chips");
+
+#endif
diff --git a/drivers/mtd/spichips/spansion.c b/drivers/mtd/spichips/spansion.c
new file mode 100644
index 0000000..33a7bca
--- /dev/null
+++ b/drivers/mtd/spichips/spansion.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifdef __UBOOT__
+#include <common.h>
+#endif
+#include "spiflash.h"
+#ifdef CFG_FLASH_SPI_DRIVER
+
+/* Name, ID1, ID2 , Size, Clock, Erase regions, address mode,{ Offset, Erase Size, Erase Block Count } */
+/* address mode: 0x00 -3 byte address
+ 0x01 - 4 byte address
+ 0x02 - Low byte: 3 byte address, High byte: 4 byte address*/
+
+static struct spi_flash_info spansion_data [] =
+{
+ /* Spansion 64 K Sectors */
+ { "Spansion S25FL064A" , 0x01, 0x1602, 0x00010001, 0x800000 , 104 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 128 },} },
+ { "Spansion S25FL128P" , 0x01, 0x1820, 0x00010001, 0x1000000 , 104 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 256 },} },
+ { "Spansion S25FL256S" , 0x01, 0x1902, 0x00010001, 0x2000000 , 104 * 1000000, 1, 0x02, {{ 0, 64 * 1024, 512 },} },
+
+};
+
+
+static
+int
+spansion_probe(int bank,struct spi_ctrl_driver *ctrl_drv, struct spi_flash_info *chip_info)
+{
+ int retval;
+ retval = spi_generic_probe(bank,ctrl_drv,chip_info,"spansion",
+ spansion_data,ARRAY_SIZE(spansion_data));
+
+ if (retval == -1)
+ return retval;
+
+ /* UnProctect all sectors */
+ /* SRWD=0 (Bit 7) BP0,BP1,BP2 = 0 (Bit 2,3,4) */
+ if (spi_generic_write_status(bank,ctrl_drv,0x0) < 0)
+ printk("spansion: Unable to Unprotect all sectors\n");
+
+ return retval;
+}
+
+struct spi_chip_driver spansion_driver =
+{
+ .name = "spansion",
+ .module = THIS_MODULE,
+ .probe = spansion_probe,
+ .erase_sector = spi_generic_erase,
+ .read_bytes = spi_generic_read,
+ .write_bytes = spi_generic_write,
+};
+
+
+
+int
+spansion_init(void)
+{
+ sema_init(&spansion_driver.lock, 1);
+#ifdef __UBOOT__ /* MIPS */
+ spansion_driver.probe = spansion_probe;
+ spansion_driver.erase_sector = spi_generic_erase;
+ spansion_driver.read_bytes = spi_generic_read;
+ spansion_driver.write_bytes = spi_generic_write;
+#endif
+ register_spi_chip_driver(&spansion_driver);
+ return 0;
+}
+
+
+void
+spansion_exit(void)
+{
+ sema_init(&spansion_driver.lock, 1);
+ unregister_spi_chip_driver(&spansion_driver);
+ return;
+}
+
+
+module_init(spansion_init);
+module_exit(spansion_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("MTD SPI driver for Spansion flash chips");
+
+#endif
diff --git a/drivers/mtd/spichips/spiaccess.c b/drivers/mtd/spichips/spiaccess.c
new file mode 100644
index 0000000..5412f72
--- /dev/null
+++ b/drivers/mtd/spichips/spiaccess.c
@@ -0,0 +1,433 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "spiflash.h"
+
+int spi_verbose = 1;
+
+
+/*----------------------------------------------------------------------------------*/
+/* Low level functions which finally talk to the chip driver */
+/*----------------------------------------------------------------------------------*/
+static void inline
+chip_unlock_sector(struct map_info *map, unsigned long sect_addr,int unlock)
+{
+ struct spi_flash_private *priv=map->fldrv_priv;
+
+ if (!priv->chip_drv->unlock_sector)
+ return;
+ (*priv->chip_drv->unlock_sector)(map,sect_addr,unlock);
+ return;
+}
+
+static int inline
+chip_is_sector_locked(struct map_info *map, unsigned long sect_addr)
+{
+ struct spi_flash_private *priv=map->fldrv_priv;
+
+ if (!priv->chip_drv->is_sector_locked)
+ return 0;
+ return (*priv->chip_drv->is_sector_locked)(map,sect_addr);
+}
+
+static int inline
+chip_read_bytes(struct map_info *map, loff_t addr, size_t bytes, unsigned char *buf)
+{
+ struct spi_flash_private *priv=map->fldrv_priv;
+
+ if (!priv->chip_drv->read_bytes)
+ return -1;
+ return (*priv->chip_drv->read_bytes)(map,addr,bytes,buf);
+}
+
+static int inline
+chip_write_bytes(struct map_info *map, loff_t addr, size_t bytes, const unsigned char *buf)
+{
+ struct spi_flash_private *priv=map->fldrv_priv;
+
+ if (!priv->chip_drv->write_bytes)
+ return -1;
+ return (*priv->chip_drv->write_bytes)(map,addr,bytes,buf);
+}
+
+static int inline
+chip_erase_sector(struct map_info *map, unsigned long sect_addr)
+{
+ struct spi_flash_private *priv=map->fldrv_priv;
+
+ if (!priv->chip_drv->erase_sector)
+ return -1;
+ return (*priv->chip_drv->erase_sector)(map,sect_addr);
+}
+
+
+void
+spi_flash_sync(struct mtd_info *mtd)
+{
+ struct map_info *map = mtd->priv;
+ struct spi_flash_private *priv = map->fldrv_priv;
+
+ if (!priv->chip_drv->sync)
+ return;
+ (*priv->chip_drv->sync)(map);
+ return;
+}
+
+int
+spi_flash_suspend(struct mtd_info *mtd)
+{
+ struct map_info *map = mtd->priv;
+ struct spi_flash_private *priv = map->fldrv_priv;
+
+ if (!priv->chip_drv->suspend)
+ return -EINVAL;
+ return (*priv->chip_drv->suspend)(map);
+}
+
+void
+spi_flash_resume(struct mtd_info *mtd)
+{
+ struct map_info *map = mtd->priv;
+ struct spi_flash_private *priv = map->fldrv_priv;
+
+ if (!priv->chip_drv->resume)
+ return;
+ (*priv->chip_drv->resume)(map);
+ return;
+}
+
+
+/*----------------------------------------------------------------------------------*/
+/* Intermediate Functions which interfaces mtd functionss to chip driver fucntions */
+/*----------------------------------------------------------------------------------*/
+static int
+spi_flash_do_unlock(struct mtd_info *mtd, loff_t ofs, uint32_t len,
+ int is_unlock)
+{
+ struct map_info *map;
+ struct mtd_erase_region_info *merip;
+ int eraseoffset, erasesize, eraseblocks;
+ int i;
+ int retval = 0;
+ int lock_status;
+
+ map = mtd->priv;
+
+ /* Pass the whole chip through sector by sector and check for each
+ sector if the sector and the given interval overlap */
+ for(i = 0; i < mtd->numeraseregions; i++)
+ {
+ merip = &mtd->eraseregions[i];
+
+ eraseoffset = merip->offset;
+ erasesize = merip->erasesize;
+ eraseblocks = merip->numblocks;
+
+ if (ofs > eraseoffset + erasesize)
+ continue;
+
+ while (eraseblocks > 0)
+ {
+ if (ofs < eraseoffset + erasesize && ofs + len > eraseoffset)
+ {
+ chip_unlock_sector(map, eraseoffset, is_unlock);
+
+ lock_status = chip_is_sector_locked(map, eraseoffset);
+
+ if (is_unlock && lock_status)
+ {
+ printk("Cannot unlock sector at address %x length %xx\n",
+ eraseoffset, merip->erasesize);
+ retval = -1;
+ }
+ else if (!is_unlock && !lock_status)
+ {
+ printk("Cannot lock sector at address %x length %x\n",
+ eraseoffset, merip->erasesize);
+ retval = -1;
+ }
+ }
+ eraseoffset += erasesize;
+ eraseblocks --;
+ }
+ }
+ return retval;
+}
+
+static int
+read_one_chip(struct map_info *map, struct flchip *chip,
+ loff_t adr, size_t len, u_char *buf)
+{
+ uint32_t i;
+ size_t bytes;
+
+ chip->state = FL_READY;
+
+ bytes = SPI_READ_PAGE_SIZE;
+ i = 0;
+ while (len >= bytes)
+ {
+ if (0 != chip_read_bytes(map,adr,bytes,&buf [i]))
+ {
+ printk (KERN_ERR "spi_read failed in read_one_chip function\n");
+ return -1;
+ }
+ len -= bytes;
+ i += bytes;
+ adr += bytes;
+ }
+
+ if (0 != len)
+ {
+ if (0 != chip_read_bytes(map, adr, len, &buf [i]))
+ {
+ printk (KERN_ERR "spi_read failed in read_one_chip function\n");
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+static int
+write_one_chip(struct map_info *map, struct flchip *chip,
+ loff_t addr, size_t len, const u_char * buf)
+{
+ uint32_t page_size, page_offset;
+ uint32_t i;
+
+ chip->state = FL_WRITING;
+
+ /* what page do we start with? */
+ page_offset = addr % SPI_WRITE_PAGE_SIZE;
+
+ /* do all the bytes fit onto one page? */
+ if (page_offset + len <= SPI_WRITE_PAGE_SIZE)
+ {
+ if (0 != chip_write_bytes (map, addr, len, buf))
+ {
+ printk (KERN_ERR "spi writing in the spi_write_bytes function failed\n");
+ return -1;
+ }
+ }
+ else
+ {
+ /* the size of data remaining on the first page */
+ page_size = SPI_WRITE_PAGE_SIZE - page_offset;
+ if (0 != chip_write_bytes (map, addr, page_size, buf))
+ {
+ printk (KERN_ERR "spi writing in the spi_write_bytes function failed\n");
+ return -1;
+ }
+ /* write everything in PAGESIZE chunks */
+ for (i = page_size; i < len; i += page_size)
+ {
+ page_size = len - i;
+ if (page_size > SPI_WRITE_PAGE_SIZE)
+ page_size = SPI_WRITE_PAGE_SIZE;
+ if (0 != chip_write_bytes (map, (addr + i), page_size, (buf + i)))
+ {
+ printk (KERN_ERR "spi writing in the spi_write_bytes function failed\n");
+ return -1;
+ }
+ }
+ }
+
+ chip->state = FL_READY;
+
+ return 0;
+
+}
+
+static int
+erase_one_block(struct map_info *map, struct flchip *chip,ulong addr)
+{
+ int retval = 0;
+
+ chip->state = FL_ERASING;
+
+ retval = chip_erase_sector (map,addr);
+
+ chip->state = FL_READY;
+
+ return (retval);
+}
+/*----------------------------------------------------------------------------------*/
+/* MTD Functions */
+/*----------------------------------------------------------------------------------*/
+int
+spi_flash_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+ return spi_flash_do_unlock(mtd, ofs, len, 1);
+}
+
+int
+spi_flash_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+ return spi_flash_do_unlock(mtd, ofs, len, 0);
+}
+
+int
+spi_flash_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct map_info *map = mtd->priv;
+ struct spi_flash_private *private = map->fldrv_priv;
+ unsigned long ofs;
+ int ret = 0;
+
+ if ((from + len) > mtd->size)
+ {
+ printk(KERN_WARNING "%s: read request past end of device "
+ "(0x%lx)\n", map->name, (unsigned long)from + len);
+ return -EINVAL;
+ }
+
+ ofs = from;
+
+ *retlen = 0;
+ ret = read_one_chip(map, &private->chips,ofs,len,buf);
+
+ if (0 == ret)
+ *retlen = len;
+ else
+ ret = -EINVAL;
+
+ return ret;
+
+}
+
+int
+spi_flash_write(struct mtd_info *mtd, loff_t to , size_t len,
+ size_t *retlen, const u_char *buf)
+{
+
+ struct map_info *map = mtd->priv;
+ struct spi_flash_private *private = map->fldrv_priv;
+
+ if (to > mtd->size)
+ {
+ printk (KERN_ERR "write address > size of spi flash\n");
+ return -EINVAL;
+ }
+
+ if ((len + to) > mtd->size)
+ {
+ printk (KERN_ERR "write address + size > size of spi flash\n");
+ return -EINVAL;
+ }
+
+ *retlen = 0;
+ if (!len)
+ return 0;
+
+ if (0 == write_one_chip(map, &private->chips, to, len, buf))
+ {
+ *retlen = len;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+
+int
+spi_flash_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+ struct map_info *map = mtd->priv;
+ struct spi_flash_private *private = map->fldrv_priv;
+ unsigned long adr, len;
+ int ret = 0;
+ int i;
+ int first;
+ struct mtd_erase_region_info *regions = mtd->eraseregions;
+
+ if (instr->addr > mtd->size)
+ return -EINVAL;
+
+ if ((instr->len + instr->addr) > mtd->size)
+ return -EINVAL;
+
+ /* Check that both start and end of the requested erase are
+ * aligned with the erasesize at the appropriate addresses.
+ */
+
+ i = 0;
+
+ /* Skip all erase regions which are ended before the start of
+ the requested erase. Actually, to save on the calculations,
+ we skip to the first erase region which starts after the
+ start of the requested erase, and then go back one.
+ */
+ while ((i < mtd->numeraseregions) &&
+ (instr->addr >= regions[i].offset))
+ {
+ i++;
+ }
+ i--;
+
+ /* OK, now i is pointing at the erase region in which this
+ * erase request starts. Check the start of the requested
+ * erase range is aligned with the erase size which is in
+ * effect here.
+ */
+ if (instr->addr & (regions[i].erasesize-1))
+ return -EINVAL;
+
+ /* Remember the erase region we start on. */
+ first = i;
+
+ /* Next, check that the end of the requested erase is aligned
+ * with the erase region at that address.
+ */
+
+ while ((i < mtd->numeraseregions) &&
+ ((instr->addr + instr->len) >= regions[i].offset))
+ {
+ i++;
+ }
+
+ /* As before, drop back one to point at the region in which
+ * the address actually falls.
+ */
+ i--;
+
+ if ((instr->addr + instr->len) & (regions[i].erasesize-1))
+ return -EINVAL;
+
+
+ adr = instr->addr;
+ len = instr->len;
+ i = first;
+
+ while (len)
+ {
+ ret = erase_one_block(map, &private->chips, adr);
+
+ if (ret)
+ return ret;
+
+ adr += regions[i].erasesize;
+ len -= regions[i].erasesize;
+ }
+
+ instr->state = MTD_ERASE_DONE;
+ mtd_erase_callback(instr);
+
+ return 0;
+}
diff --git a/drivers/mtd/spichips/spiflash.h b/drivers/mtd/spichips/spiflash.h
new file mode 100644
index 0000000..2ec2eb4
--- /dev/null
+++ b/drivers/mtd/spichips/spiflash.h
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_SPI_H__
+#define __LINUX_SPI_H__
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/dma-mapping.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+#include <asm/delay.h>
+#include <linux/semaphore.h>
+#define CFG_FLASH_SPI_DRIVER 1 /* Need for compile the modules */
+/*---------------------------------------------------------------------------
+ The folllowing should match exactly with its uboot counterpart spiflash.h
+----------------------------------------------------------------------------*/
+
+#define DEVICE_TYPE_X8 (8 / 8)
+#define DEVICE_TYPE_X16 (16 / 8)
+#define DEVICE_TYPE_X32 (32 / 8)
+
+#define SPI_READ_PAGE_SIZE (4*1024) /* 4K page size */
+#define SPI_WRITE_PAGE_SIZE 256
+
+#define MAX_ERASE_REGIONS 4
+
+struct spi_flash_info
+{
+ const char *name;
+ const __u8 mfr_id;
+ const __u16 dev_id;
+ const __u32 operationmode;
+ const uint64_t size;
+ const unsigned int max_clock;
+ const int numeraseregions;
+ const __u8 address32;
+ const struct mtd_erase_region_info regions[MAX_ERASE_REGIONS];
+};
+
+typedef enum spidir
+{
+ SPI_NONE = 0,
+ SPI_READ = 1,
+ SPI_WRITE = 2
+} SPI_DIR;
+
+struct spi_ctrl_driver
+{
+ struct module *module;
+ struct semaphore lock;
+ char *name;
+ struct list_head list;
+
+ /* Supports operation mode */
+ int operation_mode_mask;
+
+ /* Supports fast read at higher frequency */
+ int fast_read;
+
+ /* Supports fast write at higher frequency */
+ int fast_write;
+
+ /* Max datasize to be used to read type functions in spi_transfer*/
+ int max_read;
+
+ /* spi_transfer can be used for all type of spi access */
+ int (*spi_transfer)(int bank,unsigned char *cmd,int cmdlen, SPI_DIR dir,
+ unsigned char *data, unsigned long datalen);
+
+ /* spi_burst_read is not NULL, if the ctrl supports read large data continuosly */
+ int (*spi_burst_read)(int bank,unsigned char *cmd,int cmdlen, SPI_DIR dir,
+ unsigned char *data, unsigned long datalen);
+
+ int (*spi_configure_clock)(int bank, unsigned int clock);
+
+#ifdef __UBOOT__
+ int (*spi_init)(void);
+#endif
+};
+
+struct spi_chip_driver
+{
+ struct module *module;
+ struct semaphore lock;
+ char *name;
+ struct list_head list;
+ int (*probe)(int bank,struct spi_ctrl_driver *ctlr_drv, struct spi_flash_info *chip_info);
+ void (*unlock_sector) (struct map_info *map, unsigned long sect_addr,int unlock);
+ int (*is_sector_locked)(struct map_info *map, unsigned long sect_addr);
+ int (*erase_sector) (struct map_info *map, unsigned long sect_addr);
+ int (*read_bytes) (struct map_info *map, loff_t addr, size_t bytes, unsigned char *buf);
+ int (*write_bytes) (struct map_info *map, loff_t addr, size_t bytes, const unsigned char *buf);
+ void (*sync) (struct map_info *map);
+ int (*suspend) (struct map_info *map);
+ void (*resume) (struct map_info *map);
+};
+
+struct spi_flash_private
+{
+ int device_type;
+ int interleave;
+ int numchips;
+ unsigned long chipshift;
+ __u8 address32;
+ struct flchip chips;
+ struct spi_chip_driver *chip_drv;
+ struct spi_ctrl_driver *ctrl_drv;
+};
+
+/* SPI Core Functions to register,access chip and controller drivers */
+struct spi_chip_driver *get_spi_chip_driver_by_index (int index);
+struct spi_chip_driver *get_spi_chip_driver_by_name (const char *name);
+struct spi_ctrl_driver *get_spi_ctrl_driver_by_index (int index);
+struct spi_ctrl_driver *get_spi_ctrl_driver_by_name (const char *name);
+void register_spi_chip_driver(struct spi_chip_driver *drv);
+void unregister_spi_chip_driver(struct spi_chip_driver *drv);
+void register_spi_ctrl_driver(struct spi_ctrl_driver *drv);
+void unregister_spi_ctrl_driver(struct spi_ctrl_driver *drv);
+
+/* Functions registered to MTD for accessing the chips */
+int spi_flash_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+int spi_flash_write(struct mtd_info *, loff_t, size_t, size_t *,const u_char *);
+int spi_flash_erase(struct mtd_info *, struct erase_info *);
+void spi_flash_sync(struct mtd_info *);
+int spi_flash_suspend(struct mtd_info *);
+void spi_flash_resume(struct mtd_info *);
+int spi_flash_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+int spi_flash_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+
+/* Generic spi funtions which can be used by any spi device (if uses generic algo) */
+int spi_generic_write_enable(int bank,struct spi_ctrl_driver *ctrl_drv);
+int spi_generic_read_enable(int bank,struct spi_ctrl_driver *ctrl_drv);
+int spi_generic_read_status(int bank,struct spi_ctrl_driver *ctrl_drv,unsigned char *status);
+int spi_generic_write_status(int bank,struct spi_ctrl_driver *ctrl_drv, unsigned char status);
+int spi_generic_erase(struct map_info *map, unsigned long sect_addr);
+int spi_generic_read(struct map_info *map, loff_t addr, size_t bytes, unsigned char *buff);
+int spi_generic_write(struct map_info *map, loff_t addr, size_t bytes, const unsigned char *buff);
+int spi_generic_probe(int bank, struct spi_ctrl_driver *ctrl_drv, struct spi_flash_info *chip_info,
+ char *spi_name,struct spi_flash_info *spi_list, int spi_list_len);
+
+#ifdef CONFIG_SPX_FEATURE_GLOBAL_BKUP_FLASH_BANKS
+#define MAX_SPI_BANKS (CONFIG_SPX_FEATURE_GLOBAL_FLASH_BANKS + CONFIG_SPX_FEATURE_GLOBAL_BKUP_FLASH_BANKS)
+#else
+#define MAX_SPI_BANKS CONFIG_SPX_FEATURE_GLOBAL_FLASH_BANKS
+#endif
+
+#endif
diff --git a/drivers/mtd/spichips/spimtd.c b/drivers/mtd/spichips/spimtd.c
new file mode 100644
index 0000000..3c3a3c0
--- /dev/null
+++ b/drivers/mtd/spichips/spimtd.c
@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "spiflash.h"
+
+static struct mtd_info * spi_flash_probe(struct map_info *map);
+static void spi_flash_destroy(struct mtd_info *mtd);
+
+static struct mtd_chip_driver spi_flash_chipdrv =
+{
+ .probe = spi_flash_probe,
+ .destroy = spi_flash_destroy,
+ .name = "spi_probe",
+ .module = THIS_MODULE
+};
+
+unsigned long ractrends_spiflash_flash_id[MAX_SPI_BANKS];
+unsigned long ractrends_spiflash_flash_size[MAX_SPI_BANKS];
+
+/*------------------------------------------------------------------------------*/
+/* Probe Function */
+/*------------------------------------------------------------------------------*/
+static
+int
+probe_spi_chips(struct map_info *map,struct spi_flash_private *private,
+ struct spi_flash_info *spi_info)
+{
+ int bank = map->map_priv_1;
+ int req = 0;
+ int ctrl,chip;
+ int gotindex;
+ struct spi_chip_driver *chip_drv;
+ struct spi_ctrl_driver *ctrl_drv;
+
+ gotindex=0;
+
+ /* For Every Controller driver */
+ ctrl = 0;
+ ctrl_drv = get_spi_ctrl_driver_by_index(ctrl);
+ while (ctrl_drv != NULL)
+ {
+ /* For Every Chip driver */
+ chip = 0;
+ chip_drv = get_spi_chip_driver_by_index(chip);
+ while (chip_drv != NULL)
+ {
+ /* Probe for the chip on the controller */
+ if (chip_drv->probe(bank,ctrl_drv,spi_info) == 0)
+ {
+ /* If success, check if it is the requested index */
+ if (req == gotindex)
+ {
+ private->chip_drv = chip_drv;
+ private->ctrl_drv = ctrl_drv;
+ return 0;
+ }
+ gotindex++;
+ }
+ /* Try Next chip */
+ chip++;
+ chip_drv = get_spi_chip_driver_by_index(chip);
+ }
+ /* Try next controller */
+ ctrl++;
+ ctrl_drv = get_spi_ctrl_driver_by_index(ctrl);
+ }
+ return -1;
+}
+
+static int configure_spi_clock(struct spi_ctrl_driver *ctrl_drv, int bank, unsigned int clock)
+{
+ if (ctrl_drv->spi_configure_clock == NULL)
+ return 0;
+
+ return ctrl_drv->spi_configure_clock(bank, clock);
+}
+
+/*--------------------------------------------------------------------------------------*/
+/* Interfaces to MTD Module */
+/*--------------------------------------------------------------------------------------*/
+static struct mtd_info *
+spi_flash_probe(struct map_info *map)
+{
+ struct mtd_info *mtd;
+ struct spi_flash_private *private;
+
+ struct spi_flash_info spi_info;
+ struct flchip chips;
+ int j,i;
+
+
+ private = kmalloc(sizeof(*private) + sizeof(struct flchip) , GFP_KERNEL);
+ if (!private)
+ {
+ printk(KERN_WARNING
+ "%s: kmalloc failed for private structure\n", map->name);
+ return NULL;
+ }
+ memset(private,0,sizeof(*private) + (sizeof(struct flchip)));
+
+ mtd = (struct mtd_info*)kmalloc(sizeof(*mtd), GFP_KERNEL);
+ if (!mtd)
+ {
+ printk(KERN_WARNING
+ "%s: kmalloc failed for info structure\n", map->name);
+ return NULL;
+ }
+ memset(mtd, 0, sizeof(*mtd));
+
+ mtd->priv = map;
+
+ memset(&spi_info, 0, sizeof(spi_info));
+ if (probe_spi_chips(map,private,&spi_info) == -1)
+ {
+ printk(KERN_WARNING
+ "%s: No spi compatible flash device found\n",
+ map->name);
+ map->fldrv_priv = NULL;
+ kfree(mtd);
+ kfree(private);
+ return NULL;
+ }
+
+ /* Fill flash ID and size in public array */
+ ractrends_spiflash_flash_id[map->map_priv_1] = ((spi_info.mfr_id << 16) | spi_info.dev_id);
+ ractrends_spiflash_flash_size[map->map_priv_1] = spi_info.size;
+
+ configure_spi_clock(private->ctrl_drv, map->map_priv_1, spi_info.max_clock);
+
+ chips.start = 0;
+ chips.state = FL_READY;
+
+
+ /* Fill in the mtd structures */
+ mtd->size = spi_info.size;
+ mtd->numeraseregions = spi_info.numeraseregions;
+
+ /* Allocate memory for erase regions */
+ mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info) *
+ mtd->numeraseregions, GFP_KERNEL);
+ if (!mtd->eraseregions)
+ {
+ printk(KERN_WARNING "%s: Failed to allocate "
+ "memory for MTD erase region info\n", map->name);
+ kfree(mtd);
+ kfree(private);
+ map->fldrv_priv = NULL;
+ return NULL;
+ }
+
+ /* Fill in the mtd erase structures */
+ for (j = 0; j < spi_info.numeraseregions; j++)
+ {
+ mtd->eraseregions[j].offset = spi_info.regions[j].offset;
+ mtd->eraseregions[j].erasesize = spi_info.regions[j].erasesize;
+ mtd->eraseregions[j].numblocks = spi_info.regions[j].numblocks;
+ if (mtd->erasesize < mtd->eraseregions[j].erasesize)
+ mtd->erasesize = mtd->eraseregions[j].erasesize;
+ }
+
+
+ /* Fill in the remaining mtd structure */
+ mtd->type = MTD_NORFLASH;
+ mtd->flags = MTD_CAP_NORFLASH;
+ mtd->name = map->name;
+ mtd->_erase = spi_flash_erase;
+ mtd->_read = spi_flash_read;
+ mtd->_write = spi_flash_write;
+ mtd->_sync = spi_flash_sync;
+ mtd->_suspend = spi_flash_suspend;
+ mtd->_resume = spi_flash_resume;
+ mtd->_lock = spi_flash_lock;
+ mtd->_unlock = spi_flash_unlock;
+ mtd->writesize = 1;
+
+ /* Fill in the private structure */
+ private->numchips = 1;
+ private->device_type = DEVICE_TYPE_X8;
+ private->interleave = 1;
+ private->address32 = spi_info.address32;
+ memcpy(&private->chips, &chips,sizeof(struct flchip) * private->numchips);
+ for (i = 0; i < private->numchips; i++)
+ {
+ init_waitqueue_head(&private->chips.wq);
+ mutex_init(&private->chips.mutex);
+ }
+
+ /* Fill in the map structure */
+ map->fldrv_priv = private;
+ map->bankwidth = 1;
+ map->fldrv = &spi_flash_chipdrv;
+ __module_get(THIS_MODULE);
+
+ return mtd;
+}
+
+
+static void
+spi_flash_destroy(struct mtd_info *mtd)
+{
+ struct map_info *map = mtd->priv;
+ struct spi_flash_private *private = map->fldrv_priv;
+ kfree(private);
+}
+
+
+int __init
+spi_flash_init(void)
+{
+ register_mtd_chip_driver(&spi_flash_chipdrv);
+ return 0;
+}
+
+void __exit
+spi_flash_exit(void)
+{
+ unregister_mtd_chip_driver(&spi_flash_chipdrv);
+}
+
+module_init(spi_flash_init);
+module_exit(spi_flash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("Core SPI with MTD Interface");
+
diff --git a/drivers/mtd/spichips/spireg.c b/drivers/mtd/spichips/spireg.c
new file mode 100644
index 0000000..09aaa51
--- /dev/null
+++ b/drivers/mtd/spichips/spireg.c
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifdef __UBOOT__
+#include <common.h>
+#endif
+#include "spiflash.h"
+#ifdef CFG_FLASH_SPI_DRIVER
+
+DEFINE_SPINLOCK(spi_chip_drvs_lock);
+LIST_HEAD(spi_chip_drvs_list);
+DEFINE_SPINLOCK(spi_ctrl_drvs_lock);
+LIST_HEAD(spi_ctrl_drvs_list);
+
+void
+register_spi_chip_driver(struct spi_chip_driver *drv)
+{
+ spin_lock(&spi_chip_drvs_lock);
+ list_add(&drv->list, &spi_chip_drvs_list);
+ spin_unlock(&spi_chip_drvs_lock);
+}
+
+void
+unregister_spi_chip_driver(struct spi_chip_driver *drv)
+{
+ spin_lock(&spi_chip_drvs_lock);
+ list_del(&drv->list);
+ spin_unlock(&spi_chip_drvs_lock);
+}
+
+void
+register_spi_ctrl_driver(struct spi_ctrl_driver *drv)
+{
+ spin_lock(&spi_ctrl_drvs_lock);
+ list_add(&drv->list, &spi_ctrl_drvs_list);
+ spin_unlock(&spi_ctrl_drvs_lock);
+}
+
+void
+unregister_spi_ctrl_driver(struct spi_ctrl_driver *drv)
+{
+ spin_lock(&spi_ctrl_drvs_lock);
+ list_del(&drv->list);
+ spin_unlock(&spi_ctrl_drvs_lock);
+}
+
+struct spi_chip_driver *
+get_spi_chip_driver_by_name (const char *name)
+{
+ struct list_head *pos;
+ struct spi_chip_driver *ret = NULL, *this;
+
+ spin_lock(&spi_chip_drvs_lock);
+
+ list_for_each(pos, &spi_chip_drvs_list) {
+ this = list_entry(pos, typeof(*this), list);
+
+ if (!strcmp(this->name, name)) {
+ ret = this;
+ break;
+ }
+ }
+ if (ret && !try_module_get(ret->module))
+ ret = NULL;
+
+ spin_unlock(&spi_chip_drvs_lock);
+
+ return ret;
+}
+
+struct spi_chip_driver *
+get_spi_chip_driver_by_index (int index)
+{
+ struct list_head *pos;
+ struct spi_chip_driver *ret = NULL, *this;
+ int got;
+
+ spin_lock(&spi_chip_drvs_lock);
+
+ got=0;
+ list_for_each(pos, &spi_chip_drvs_list) {
+ this = list_entry(pos, typeof(*this), list);
+
+ if (index == got) {
+ ret = this;
+ break;
+ }
+ got++;
+ }
+ if (ret && !try_module_get(ret->module))
+ ret = NULL;
+
+ spin_unlock(&spi_chip_drvs_lock);
+
+ return ret;
+}
+
+
+struct spi_ctrl_driver *
+get_spi_ctrl_driver_by_name (const char *name)
+{
+ struct list_head *pos;
+ struct spi_ctrl_driver *ret = NULL, *this;
+
+ spin_lock(&spi_ctrl_drvs_lock);
+
+ list_for_each(pos, &spi_ctrl_drvs_list) {
+ this = list_entry(pos, typeof(*this), list);
+
+ if (!strcmp(this->name, name)) {
+ ret = this;
+ break;
+ }
+ }
+ if (ret && !try_module_get(ret->module))
+ ret = NULL;
+
+ spin_unlock(&spi_ctrl_drvs_lock);
+
+ return ret;
+}
+
+struct spi_ctrl_driver *
+get_spi_ctrl_driver_by_index (int index)
+{
+ struct list_head *pos;
+ struct spi_ctrl_driver *ret = NULL, *this;
+ int got;
+
+ spin_lock(&spi_ctrl_drvs_lock);
+
+ got=0;
+ list_for_each(pos, &spi_ctrl_drvs_list) {
+ this = list_entry(pos, typeof(*this), list);
+
+ if (index == got) {
+ ret = this;
+ break;
+ }
+ got++;
+ }
+ if (ret && !try_module_get(ret->module))
+ ret = NULL;
+
+ spin_unlock(&spi_ctrl_drvs_lock);
+
+ return ret;
+}
+
+
+
+EXPORT_SYMBOL(get_spi_chip_driver_by_name);
+EXPORT_SYMBOL(get_spi_chip_driver_by_index);
+EXPORT_SYMBOL(get_spi_ctrl_driver_by_name);
+EXPORT_SYMBOL(get_spi_ctrl_driver_by_index);
+EXPORT_SYMBOL(register_spi_ctrl_driver);
+EXPORT_SYMBOL(unregister_spi_ctrl_driver);
+EXPORT_SYMBOL(register_spi_chip_driver);
+EXPORT_SYMBOL(unregister_spi_chip_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("Core routines for (un)registering spi chip and controller drivers");
+
+#endif
diff --git a/drivers/mtd/spichips/winbond.c b/drivers/mtd/spichips/winbond.c
new file mode 100644
index 0000000..03b203c
--- /dev/null
+++ b/drivers/mtd/spichips/winbond.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2007 American Megatrends Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifdef __UBOOT__
+#include <common.h>
+#endif
+#include "spiflash.h"
+#ifdef CFG_FLASH_SPI_DRIVER
+
+/* Name, ID1, ID2 , Size, Clock, Erase regions, address mode,{ Offset, Erase Size, Erase Block Count } */
+/* address mode: 0x00 -3 byte address
+ 0x01 - 4 byte address
+ 0x02 - Low byte: 3 byte address, High byte: 4 byte address*/
+static struct spi_flash_info winbond_data [] =
+{
+ /* Winbond 64 K Sectors */
+ { "Winbond W25X64" , 0xEF, 0x1730, 0x00010007, 0x800000 , 75 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 128 },} },
+ { "Winbond W25Q32" , 0xEF, 0x1640, 0x0001000F, 0x400000 , 75 * 1000000 , 1, 0x00, {{ 0, 64 * 1024, 128 },} },
+ { "Winbond W25Q64" , 0xEF, 0x1740, 0x0001000F, 0x800000 , 80 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 128 },} },
+ { "Winbond W25Q128", 0xEF, 0x1840, 0x0001000F, 0x1000000, 104 * 1000000, 1, 0x00, {{ 0, 64 * 1024, 256 },} },
+ { "Winbond W25Q256", 0xEF, 0x1940, 0x0001000F, 0x2000000, 104 * 1000000, 1, 0x02, {{ 0, 64 * 1024, 512 },} },
+ { "Winbond W25M512", 0xEF, 0x1971, 0x0001000f, 0x4000000, 104 * 1000000, 2, 0x06, {{ 0, 64 * 1024, 512 },{ 0x2000000, 64 * 1024, 512 },} },
+};
+
+static
+int
+winbond_probe(int bank,struct spi_ctrl_driver *ctrl_drv, struct spi_flash_info *chip_info)
+{
+ int retval;
+ retval = spi_generic_probe(bank,ctrl_drv,chip_info,"winbond",
+ winbond_data,ARRAY_SIZE(winbond_data));
+
+ if (retval == -1)
+ return retval;
+
+ /* UnProctect all sectors */
+ /* SRWD=0 (Bit 7) BP0,BP1,BP2 = 0 (Bit 2,3,4) */
+ if (spi_generic_write_status(bank,ctrl_drv,0x0) < 0)
+ printk("winbond: Unable to Unprotect all sectors\n");
+
+ return retval;
+}
+
+struct spi_chip_driver winbond_driver =
+{
+ .name = "winbond",
+ .module = THIS_MODULE,
+ .probe = winbond_probe,
+ .erase_sector = spi_generic_erase,
+ .read_bytes = spi_generic_read,
+ .write_bytes = spi_generic_write,
+};
+
+int
+winbond_init(void)
+{
+ sema_init(&winbond_driver.lock, 1);
+#ifdef __UBOOT__ /* MIPS */
+ winbond_driver.probe = winbond_probe;
+ winbond_driver.erase_sector = spi_generic_erase;
+ winbond_driver.read_bytes = spi_generic_read;
+ winbond_driver.write_bytes = spi_generic_write;
+#endif
+ register_spi_chip_driver(&winbond_driver);
+ return 0;
+}
+
+void
+winbond_exit(void)
+{
+ sema_init(&winbond_driver.lock, 1);
+ unregister_spi_chip_driver(&winbond_driver);
+ return;
+}
+
+module_init(winbond_init);
+module_exit(winbond_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("American Megatrends Inc");
+MODULE_DESCRIPTION("MTD SPI driver for Winbond flash chips");
+
+#endif
--
1.9.1离线
#29 2019-05-14 08:51:07 分享评论
- wu150
- 会员
- 注册时间： 2019-03-30
- 已发帖子： 57
- 积分： 56.5
Re: 买两片 W25M512JVFIQ 测试一下
太折腾吧花那么多时间
离线
#30 2019-05-14 08:59:22 分享评论
- smartcar
- 会员
- 注册时间： 2018-02-19
- 已发帖子： 735
- 积分： 735
Re: 买两片 W25M512JVFIQ 测试一下
wu150 说：
太折腾吧花那么多时间
没办法， 客户指定要用这种 spi nor flash, 32M字节的又小了， 只能硬着头皮上 64M的。
离线
#31 2019-07-21 22:50:24 分享评论
- 路人乙
- 会员
- 注册时间： 2017-09-26
- 已发帖子： 57
- 积分： 57
Re: 买两片 W25M512JVFIQ 测试一下
不知道打上这个补丁如何: https://github.com/betaflight/betaflight/pull/5722/files
不知道为什么最新的 Linux mtd代码都没有加上 w25m512 的驱动
离线
#32 2022-12-16 18:21:48 分享评论
- ami7777
- 会员
- 注册时间： 2021-07-30
- 已发帖子： 2
- 积分： 2
Re: 买两片 W25M512JVFIQ 测试一下
请问大家 mx66l51235f 这款64M的flash 我在uboot和kernel里面看到都是支持的 应该是没有双die的问题吧 v3s可以用这款nor-flash么？
离线
感谢为中文互联网持续输出优质内容的各位老铁们。
QQ: 516333132, 微信(wechat): whycan_cn (哇酷网/挖坑网/填坑网) service@whycan.cn