- 首页
- » 搜索
- » olili 发表的帖子
页次： 1
#1 Re: 计算机图形/GUI/RTOS/FileSystem/OpenGL/DirectX/SDL2 » 在V3S上试着跑了一下新版的LVGL-8.1 界面效果越来越赞！ » 2022-05-06 16:55:35
#2 Re: 全志 SOC » 网站需要改革，放开文件下载权限（不需要与积分挂钩） » 2022-05-05 16:27:35
#5 Re: SigmaStar/SSD201/SSD202/SSD212 » SSD202开源在线文档( 含搭建、SDK开发、API参考、调试） » 2021-01-06 14:20:43
mango 说：
邮票孔版本，明天上班就去打板板
https://whycan.com/files/members/383/ssd202d-2021-01-03.png
你们这个核心板好像和启明的有点像额，出来了吗，什么配置什么价，准备搞几块来吃灰:)
#7 Re: 全志 SOC » 也发一个荔枝派zero 全志V3s 32M spi flash 固件，800x480 LCD, 开机自动运行 Qt analogclock » 2020-09-17 13:51:41
大神你的uboot编译配置文件和linux内核配置文件能共享一下吗？/proc/config.gz文件不存在，谢谢！
路漫漫 说：
V3s ENC28j60 网卡驱动成功， SPI接口连ENC28J60， PB5接ENC28J60 INT口:
&spi0 { status ="okay"; eth1: enc28j60@0{ compatible = "microchip,enc28j60"; reg = <0x0>; /* CE0 */ interrupt-parent = <&pio>; interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* (PB5) */ gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>; spi-max-frequency = <12000000>; status = "okay"; }; #if 0 mx25l25635e:mx25l25635e@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-max-frequency = <50000000>; #address-cells = <1>; #size-cells = <1>; }; #endif };https://whycan.cn/files/members/1842/QQ图片20200702160214.jpg
固件本站下载: V3s_tfcard_20200702151252.tgz
#9 Re: 全志 SOC » 请坑友门帮忙调一个4.3寸480x272的屏的驱动参数（用的mango-pi系统），或者推荐一款好用的屏 » 2020-09-16 13:22:34
感谢各位坑友。可能是板子焊接的问题，我又换了一个上古时代的荔枝派zero，用的https://whycan.com/t_3400.html第20楼的固件，发现屏能跑起来，除了分辨率不对（固件是800x480的），屏背光有点闪，触摸没有以外都还挺好，请问分辨率在哪里改呢？
dtb内容如下：
/dts-v1/;
/ {
#address-cells = <0x1>;
#size-cells = <0x1>;
interrupt-parent = <0x1>;
model = "Lichee Pi Zero with Dock";
compatible = "licheepi,licheepi-zero-dock", "licheepi,licheepi-zero", "allwinner,sun8i-v3s";
chosen {
#address-cells = <0x1>;
#size-cells = <0x1>;
ranges;
stdout-path = "serial0:115200n8";
framebuffer@0 {
compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
allwinner,pipeline = "de0-lcd0";
clocks = <0x2 0x21 0x3 0x0 0x3 0x6 0x2 0x40>;
status = "disabled";
};
};
cpus {
#address-cells = <0x1>;
#size-cells = <0x0>;
cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0x0>;
clocks = <0x2 0xe>;
};
};
display-engine {
compatible = "allwinner,sun8i-v3s-display-engine";
allwinner,pipelines = <0x4>;
status = "disabled";
};
timer {
compatible = "arm,armv7-timer";
interrupts = <0x1 0xd 0xf08 0x1 0xe 0xf08 0x1 0xb 0xf08 0x1 0xa 0xf08>;
};
clocks {
#address-cells = <0x1>;
#size-cells = <0x1>;
ranges;
osc24M_clk {
#clock-cells = <0x0>;
compatible = "fixed-clock";
clock-frequency = <0x16e3600>;
clock-output-names = "osc24M";
linux,phandle = <0xc>;
phandle = <0xc>;
};
osc32k_clk {
#clock-cells = <0x0>;
compatible = "fixed-clock";
clock-frequency = <0x8000>;
clock-output-names = "osc32k";
linux,phandle = <0xd>;
phandle = <0xd>;
};
};
soc {
compatible = "simple-bus";
#address-cells = <0x1>;
#size-cells = <0x1>;
ranges;
clock@1000000 {
compatible = "allwinner,sun8i-v3s-de2-clk";
reg = <0x1000000 0x100000>;
clocks = <0x2 0x3f 0x2 0x23>;
clock-names = "mod", "bus";
resets = <0x2 0x22>;
#clock-cells = <0x1>;
#reset-cells = <0x1>;
linux,phandle = <0x3>;
phandle = <0x3>;
};
mixer@1100000 {
compatible = "allwinner,sun8i-v3s-de2-mixer";
reg = <0x1100000 0x100000>;
clocks = <0x3 0x0 0x3 0x6>;
clock-names = "bus", "mod";
resets = <0x3 0x0>;
assigned-clocks = <0x3 0x6>;
assigned-clock-rates = <0x8f0d180>;
linux,phandle = <0x4>;
phandle = <0x4>;
ports {
#address-cells = <0x1>;
#size-cells = <0x0>;
port@1 {
#address-cells = <0x1>;
#size-cells = <0x0>;
reg = <0x1>;
endpoint@0 {
reg = <0x0>;
remote-endpoint = <0x5>;
linux,phandle = <0x6>;
phandle = <0x6>;
};
};
};
};
syscon@1c00000 {
compatible = "allwinner,sun8i-v3s-system-controller", "syscon";
reg = <0x1c00000 0x1000>;
linux,phandle = <0x16>;
phandle = <0x16>;
};
lcd-controller@1c0c000 {
compatible = "allwinner,sun8i-v3s-tcon";
reg = <0x1c0c000 0x1000>;
interrupts = <0x0 0x56 0x4>;
clocks = <0x2 0x21 0x2 0x40>;
clock-names = "ahb", "tcon-ch0";
clock-output-names = "tcon-pixel-clock";
resets = <0x2 0x1b>;
reset-names = "lcd";
status = "disabled";
ports {
#address-cells = <0x1>;
#size-cells = <0x0>;
port@0 {
#address-cells = <0x1>;
#size-cells = <0x0>;
reg = <0x0>;
endpoint@0 {
reg = <0x0>;
remote-endpoint = <0x6>;
linux,phandle = <0x5>;
phandle = <0x5>;
};
};
port@1 {
#address-cells = <0x1>;
#size-cells = <0x0>;
reg = <0x1>;
};
};
};
dma-controller@01c02000 {
compatible = "allwinner,sun8i-v3s-dma";
reg = <0x1c02000 0x1000>;
interrupts = <0x0 0x32 0x4>;
clocks = <0x2 0x15>;
resets = <0x2 0x6>;
#dma-cells = <0x1>;
linux,phandle = <0x10>;
phandle = <0x10>;
};
mmc@01c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x1c0f000 0x1000>;
clocks = <0x2 0x16 0x2 0x2d 0x2 0x2f 0x2 0x2e>;
clock-names = "ahb", "mmc", "output", "sample";
resets = <0x2 0x7>;
reset-names = "ahb";
interrupts = <0x0 0x3c 0x4>;
status = "okay";
#address-cells = <0x1>;
#size-cells = <0x0>;
pinctrl-0 = <0x7>;
pinctrl-names = "default";
broken-cd;
bus-width = <0x4>;
vmmc-supply = <0x8>;
};
mmc@01c10000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x1c10000 0x1000>;
clocks = <0x2 0x17 0x2 0x30 0x2 0x32 0x2 0x31>;
clock-names = "ahb", "mmc", "output", "sample";
resets = <0x2 0x8>;
reset-names = "ahb";
interrupts = <0x0 0x3d 0x4>;
pinctrl-names = "default";
pinctrl-0 = <0x9>;
status = "okay";
#address-cells = <0x1>;
#size-cells = <0x0>;
broken-cd;
bus-width = <0x4>;
vmmc-supply = <0x8>;
};
mmc@01c11000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x1c11000 0x1000>;
clocks = <0x2 0x18 0x2 0x33 0x2 0x35 0x2 0x34>;
clock-names = "ahb", "mmc", "output", "sample";
resets = <0x2 0x9>;
reset-names = "ahb";
interrupts = <0x0 0x3e 0x4>;
status = "disabled";
#address-cells = <0x1>;
#size-cells = <0x0>;
};
usb@01c19000 {
compatible = "allwinner,sun8i-h3-musb";
reg = <0x1c19000 0x400>;
clocks = <0x2 0x1d>;
resets = <0x2 0x11>;
interrupts = <0x0 0x47 0x4>;
interrupt-names = "mc";
phys = <0xa 0x0>;
phy-names = "usb";
extcon = <0xa 0x0>;
status = "okay";
dr_mode = "otg";
};
phy@01c19400 {
compatible = "allwinner,sun8i-v3s-usb-phy";
reg = <0x1c19400 0x2c 0x1c1a800 0x4>;
reg-names = "phy_ctrl", "pmu0";
clocks = <0x2 0x38>;
clock-names = "usb0_phy";
resets = <0x2 0x0>;
reset-names = "usb0_reset";
status = "okay";
#phy-cells = <0x1>;
usb0_id_det-gpio = <0xb 0x5 0x6 0x0>;
linux,phandle = <0xa>;
phandle = <0xa>;
};
usb@01c1a000 {
compatible = "allwinner,sun8i-v3s-ehci", "generic-ehci";
reg = <0x1c1a000 0x100>;
interrupts = <0x0 0x48 0x4>;
clocks = <0x2 0x1e 0x2 0x1f>;
resets = <0x2 0x12 0x2 0x16>;
status = "okay";
};
usb@01c1a400 {
compatible = "allwinner,sun8i-v3s-ohci", "generic-ohci";
reg = <0x1c1a400 0x100>;
interrupts = <0x0 0x49 0x4>;
clocks = <0x2 0x1e 0x2 0x1f 0x2 0x39>;
resets = <0x2 0x12 0x2 0x16>;
status = "okay";
};
clock@01c20000 {
compatible = "allwinner,sun8i-v3s-ccu";
reg = <0x1c20000 0x400>;
clocks = <0xc 0xd>;
clock-names = "hosc", "losc";
#clock-cells = <0x1>;
#reset-cells = <0x1>;
linux,phandle = <0x2>;
phandle = <0x2>;
};
rtc@01c20400 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x1c20400 0x54>;
interrupts = <0x0 0x28 0x4 0x0 0x29 0x4>;
};
pinctrl@01c20800 {
compatible = "allwinner,sun8i-v3s-pinctrl";
reg = <0x1c20800 0x400>;
interrupts = <0x0 0xf 0x4 0x0 0x11 0x4>;
clocks = <0x2 0x25 0xc 0xd>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <0x3>;
interrupt-controller;
#interrupt-cells = <0x3>;
linux,phandle = <0xb>;
phandle = <0xb>;
i2c0 {
pins = "PB6", "PB7";
function = "i2c0";
linux,phandle = <0x15>;
phandle = <0x15>;
};
uart0@0 {
pins = "PB8", "PB9";
function = "uart0";
linux,phandle = <0x12>;
phandle = <0x12>;
};
uart1@0 {
pins = "PE21", "PE22";
function = "uart1";
linux,phandle = <0x13>;
phandle = <0x13>;
};
uart2@0 {
pins = "PB0", "PB1";
function = "uart2";
linux,phandle = <0x14>;
phandle = <0x14>;
};
lcd-rgb666-pe {
pins = "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PE16", "PE17", "PE18", "PE19", "PE23", "PE24";
function = "lcd0";
};
mmc0@0 {
pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
function = "mmc0";
drive-strength = <0x1e>;
bias-pull-up;
linux,phandle = <0x7>;
phandle = <0x7>;
};
mmc1 {
pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5";
function = "mmc1";
drive-strength = <0x1e>;
bias-pull-up;
linux,phandle = <0x9>;
phandle = <0x9>;
};
spi0 {
pins = "PC0", "PC1", "PC2", "PC3";
function = "spi0";
linux,phandle = <0x18>;
phandle = <0x18>;
};
pwm0 {
pins = "PB4";
function = "pwm0";
linux,phandle = <0xe>;
phandle = <0xe>;
};
pwm1 {
pins = "PB5";
function = "pwm1";
};
};
timer@01c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x1c20c00 0xa0>;
interrupts = <0x0 0x12 0x4 0x0 0x13 0x4>;
clocks = <0xc>;
};
watchdog@01c20ca0 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x1c20ca0 0x20>;
interrupts = <0x0 0x19 0x4>;
};
pwm@1c21400 {
compatible = "allwinner,sun8i-v3s-pwm", "allwinner,sun7i-a20-pwm";
reg = <0x1c21400 0x400>;
clocks = <0xc>;
#pwm-cells = <0x3>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <0xe>;
linux,phandle = <0x19>;
phandle = <0x19>;
};
lradc@1c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x1c22800 0x400>;
interrupts = <0x0 0x1e 0x4>;
status = "okay";
vref-supply = <0xf>;
button@200 {
label = "Volume Up";
linux,code = <0x73>;
channel = <0x0>;
voltage = <0x30d40>;
};
button@400 {
label = "Volume Down";
linux,code = <0x72>;
channel = <0x0>;
voltage = <0x61a80>;
};
button@600 {
label = "Select";
linux,code = <0x161>;
channel = <0x0>;
voltage = <0x927c0>;
};
button@800 {
label = "Start";
linux,code = <0x160>;
channel = <0x0>;
voltage = <0xc3500>;
};
};
codec@01c22c00 {
#sound-dai-cells = <0x0>;
compatible = "allwinner,sun8i-v3s-codec";
reg = <0x1c22c00 0x400>;
interrupts = <0x0 0x1d 0x4>;
clocks = <0x2 0x24 0x2 0x46>;
clock-names = "apb", "codec";
resets = <0x2 0x28>;
dmas = <0x10 0xf 0x10 0xf>;
dma-names = "rx", "tx";
allwinner,codec-analog-controls = <0x11>;
status = "okay";
allwinner,audio-routing = "Headphone", "HP", "Headphone", "HPCOM", "MIC1", "Mic", "Mic", "HBIAS";
};
codec-analog@01c23000 {
compatible = "allwinner,sun8i-v3s-codec-analog";
reg = <0x1c23000 0x4>;
linux,phandle = <0x11>;
phandle = <0x11>;
};
serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x1c28000 0x400>;
interrupts = <0x0 0x0 0x4>;
reg-shift = <0x2>;
reg-io-width = <0x4>;
clocks = <0x2 0x28>;
resets = <0x2 0x31>;
status = "okay";
pinctrl-0 = <0x12>;
pinctrl-names = "default";
};
serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x1c28400 0x400>;
interrupts = <0x0 0x1 0x4>;
reg-shift = <0x2>;
reg-io-width = <0x4>;
clocks = <0x2 0x29>;
resets = <0x2 0x32>;
status = "okay";
pinctrl-0 = <0x13>;
pinctrl-names = "default";
};
serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x1c28800 0x400>;
interrupts = <0x0 0x2 0x4>;
reg-shift = <0x2>;
reg-io-width = <0x4>;
clocks = <0x2 0x2a>;
resets = <0x2 0x33>;
status = "okay";
pinctrl-0 = <0x14>;
pinctrl-names = "default";
};
i2c@01c2ac00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x1c2ac00 0x400>;
interrupts = <0x0 0x6 0x4>;
clocks = <0x2 0x26>;
resets = <0x2 0x2e>;
pinctrl-names = "default";
pinctrl-0 = <0x15>;
status = "okay";
#address-cells = <0x1>;
#size-cells = <0x0>;
tsc2007@48 {
compatible = "ti,tsc2007";
reg = <0x48>;
interrupt-parent = <0xb>;
interrupts = <0x1 0x2 0x2>;
gpios = <0xb 0x1 0x2 0x0>;
pendown-gpio = <0xb 0x1 0x2 0x0>;
ti,x-plate-ohms = <0x294>;
wakeup-source;
};
};
i2c@01c2b000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x1c2b000 0x400>;
interrupts = <0x0 0x7 0x4>;
clocks = <0x2 0x27>;
resets = <0x2 0x2f>;
status = "disabled";
#address-cells = <0x1>;
#size-cells = <0x0>;
};
ethernet@1c30000 {
compatible = "allwinner,sun8i-v3s-emac";
syscon = <0x16>;
reg = <0x1c30000 0x10000>;
interrupts = <0x0 0x52 0x4>;
interrupt-names = "macirq";
resets = <0x2 0xc>;
reset-names = "stmmaceth";
clocks = <0x2 0x1a>;
clock-names = "stmmaceth";
phy-handle = <0x17>;
phy-mode = "mii";
#address-cells = <0x1>;
#size-cells = <0x0>;
status = "okay";
mdio {
#address-cells = <0x1>;
#size-cells = <0x0>;
ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x1>;
clocks = <0x2 0x2b>;
resets = <0x2 0x27>;
phy-is-integrated;
linux,phandle = <0x17>;
phandle = <0x17>;
};
};
};
spi@1c68000 {
compatible = "allwinner,sun8i-h3-spi";
reg = <0x1c68000 0x1000>;
interrupts = <0x0 0x41 0x4>;
clocks = <0x2 0x1c 0x2 0x37>;
clock-names = "ahb", "mod";
pinctrl-names = "default";
pinctrl-0 = <0x18>;
resets = <0x2 0xf>;
status = "okay";
#address-cells = <0x1>;
#size-cells = <0x0>;
mx25l25635e@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-max-frequency = <0x2faf080>;
#address-cells = <0x1>;
#size-cells = <0x1>;
};
};
interrupt-controller@01c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x1c81000 0x1000 0x1c82000 0x1000 0x1c84000 0x2000 0x1c86000 0x2000>;
interrupt-controller;
#interrupt-cells = <0x3>;
interrupts = <0x1 0x9 0xf04>;
linux,phandle = <0x1>;
phandle = <0x1>;
};
};
ahci-5v {
compatible = "regulator-fixed";
regulator-name = "ahci-5v";
regulator-min-microvolt = <0x4c4b40>;
regulator-max-microvolt = <0x4c4b40>;
regulator-boot-on;
enable-active-high;
gpio = <0xb 0x1 0x8 0x0>;
status = "disabled";
};
usb0-vbus {
compatible = "regulator-fixed";
regulator-name = "usb0-vbus";
regulator-min-microvolt = <0x4c4b40>;
regulator-max-microvolt = <0x4c4b40>;
enable-active-high;
gpio = <0xb 0x1 0x9 0x0>;
status = "disabled";
};
usb1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb1-vbus";
regulator-min-microvolt = <0x4c4b40>;
regulator-max-microvolt = <0x4c4b40>;
regulator-boot-on;
enable-active-high;
gpio = <0xb 0x7 0x6 0x0>;
status = "disabled";
};
usb2-vbus {
compatible = "regulator-fixed";
regulator-name = "usb2-vbus";
regulator-min-microvolt = <0x4c4b40>;
regulator-max-microvolt = <0x4c4b40>;
regulator-boot-on;
enable-active-high;
gpio = <0xb 0x7 0x3 0x0>;
status = "disabled";
};
vcc3v0 {
compatible = "regulator-fixed";
regulator-name = "vcc3v0";
regulator-min-microvolt = <0x2dc6c0>;
regulator-max-microvolt = <0x2dc6c0>;
linux,phandle = <0xf>;
phandle = <0xf>;
};
vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <0x325aa0>;
regulator-max-microvolt = <0x325aa0>;
linux,phandle = <0x8>;
phandle = <0x8>;
};
vcc5v0 {
compatible = "regulator-fixed";
regulator-name = "vcc5v0";
regulator-min-microvolt = <0x4c4b40>;
regulator-max-microvolt = <0x4c4b40>;
};
aliases {
serial0 = "/soc/serial@01c28000";
ethernet0 = "/soc/ethernet@1c30000";
};
leds {
compatible = "gpio-leds";
status = "disabled";
blue_led {
label = "licheepi:blue:usr";
gpios = <0xb 0x6 0x1 0x1>;
};
green_led {
label = "licheepi:green:usr";
gpios = <0xb 0x6 0x0 0x1>;
default-state = "on";
};
red_led {
label = "licheepi:red:usr";
gpios = <0xb 0x6 0x2 0x1>;
};
};
backlight {
compatible = "pwm-backlight";
pwms = <0x19 0x0 0xf4240 0x0>;
brightness-levels = <0x0 0x1e 0x28 0x32 0x3c 0x46 0x64>;
default-brightness-level = <0x6>;
};
};
#11 全志 SOC » 请坑友门帮忙调一个4.3寸480x272的屏的驱动参数（用的mango-pi系统），或者推荐一款好用的屏 » 2020-09-16 09:56:46
- olili
- 回复： 6
各位坑友好，最近折腾V3S的板子，要上一块4.3寸，分辨率480x272的触摸屏，型号为KD043WQTPA035-01,控制IC：ST7282,RGB接口，文档上的timing参数如下：
请问如何设置以下参数呢？（下面的是我设置的其中一套参数，但是会出现花屏的现象）
;----------------------------------------------------------------------------------
;lcd0 configuration
;lcd_if: 0:hv(sync+de); 1:8080; 2:ttl; 3:lvds; 4:dsi; 5:edp; 6:extend dsi
;lcd_x: lcd horizontal resolution
;lcd_y: lcd vertical resolution
;lcd_width: width of lcd in mm
;lcd_height: height of lcd in mm
;lcd_dclk_freq: in MHZ unit
;lcd_pwm_freq: in HZ unit
;lcd_pwm_pol: lcd backlight PWM polarity
;lcd_pwm_max_limit lcd backlight PWM max limit(<=255)
;lcd_hbp: hsync back porch
;lcd_ht: hsync total cycle
;lcd_vbp: vsync back porch
;lcd_vt: vysnc total cycle
;lcd_hspw: hsync plus width
;lcd_vspw: vysnc plus width
;lcd_lvds_if: 0:single link; 1:dual link
;lcd_lvds_colordepth: 0:8bit; 1:6bit
;lcd_lvds_mode: 0:NS mode; 1:JEIDA mode
;lcd_frm: 0:disable; 1:enable rgb666 dither; 2:enable rgb656 dither
;lcd_io_phase: 0:noraml; 1:intert phase(0~3bit: vsync phase; 4~7bit:hsync phase;
; 8~11bit:dclk phase; 12~15bit:de phase)
;lcd_gamma_en lcd gamma correction enable
;lcd_bright_curve_en lcd bright curve correction enable
;lcd_cmap_en lcd color map function enable
;deu_mode 0:smoll lcd screen; 1:large lcd screen(larger than 10inch)
;lcdgamma4iep: Smart Backlight parameter, lcd gamma vale * 10;
; decrease it while lcd is not bright enough; increase while lcd is too bright
;smart_color 90:normal lcd screen 65:retina lcd screen(9.7inch)
;----------------------------------------------------------------------------------
[lcd0_para]
lcd_used = 1
lcd_driver_name = "vs043con08v0"
lcd_if = 0
lcd_x = 480
lcd_y = 272
lcd_width = 0
lcd_height = 0
lcd_dclk_freq = 9
lcd_pwm_used = 1
lcd_pwm_ch = 0
lcd_pwm_freq = 50000
lcd_pwm_pol = 1
lcd_pwm_max_limit = 255
lcd_hbp = 2
lcd_ht = 525
lcd_hspw = 41
lcd_vbp = 2
lcd_vt = 286
lcd_vspw = 2
lcd_frm = 0
lcd_hv_clk_phase = 0
lcd_hv_sync_polarity = 0
lcd_gamma_en = 0
lcd_bright_curve_en = 1
lcd_cmap_en = 0
lcdgamma4iep = 22花屏实拍：
请坑友门帮我看看应该怎样设置正确的参数，或者推荐一款好用的屏也是极好的，谢谢！:)
#12 Re: 全志 SOC » DIY一个全志H3的核心板，开贴记录一下 » 2020-07-11 11:22:57
页次： 1
- 首页
- » 搜索
- » olili 发表的帖子
感谢为中文互联网持续输出优质内容的各位老铁们。
QQ: 516333132, 微信(wechat): whycan_cn (哇酷网/挖坑网/填坑网) service@whycan.cn