V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

逸俊晨晖 · 2020-10-06 22:57:31

前置要求：
基于aodzip的cedar：
https://whycan.com/t_4219.html
完成以上操作后要保证能在/dev目录下找到cedar_dev和ion

基本思路：
aodzip已经搞出了libcedar和openmax
全志的硬编解码库（即libcedarc\library\arm-linux-gnueabihf里面的库）可以操作设备/dev/cedar_dev
libcedar可以操作全志硬编解码库和设备/dev/ion
openmax是对libcedar的操作封装用于作为ffmpeg和gstreamer的编解码器插件
全志已经对openmax操作libcedar做好了适配我们可以用支持openmax插件的音视频编解码器进行硬件编解码
aodzip原贴里有人提到过可以使用gstreamer1.0进行验证本贴就是通过gstreamer1.0的插件openmax调用cedar进行H264解码

注意：openmax可以作为ffmpeg的编码器插件不能直接作为ffmpeg的解码器插件有个例外树莓派可用使用openmax作为ffmpeg的解码器插件这个是特殊接口

gstremer适配：

buildroot:
因为全志的硬编解码库默认是用glibc编译的所以要确定buildroot使用的c库是glibc
打开buildroot菜单

make menuconfig

检查
Toolchain->C library (glibc)

添加openmax组件
Target packages->Audio and video applications->bellagio

添加gstreamer组件
Target packages->Audio and video applications->gstreamer 1.x

同目录下

enable command-line parser
enable tracing subsystem
enable gst-debug trace support
enable plugin registry
install gst-launch & gst-inspect

添加gstreamer插件
同目录下

gst1-plugins-base
    videotestsrc
videoconvert
videorate

gst1-plugins-bayer2rgb-neon

gst1-plugins-good 
avi (*.avi video)
    videofilter

gst1-plugins-bad
    autoconvert
    videoparsers
    videosignal
    fbdev            对fb设备操作的支持 选择后才能输出在fb上
    fdk-aac

gst1-libav                    这个是ffmpeg的解码库 可以做个软解对比
gst-omx                这个是openmax的插件接口

选择好后保存编译

make

openmax接口修改：
此时编译好后gstreamer的openmax插件接口是不可以正常使用的
使用全志的openmax插件解码器进行解码时会出现gstreamer协商错误
这是因为全志在openmax插件上新定义了颜色空间而gstreamer的openmax接口不知道所以我们要让gstreamer的openmax接口知道
（在文件libcedarc\openmax\include\OMX_IVCommon.h中的OMX_COLOR_FORMATTYPE枚举型下可以看到全志扩展了两个类型）
（在文件libcedarc\openmax\vdec\inc\omx_vdec_config.h的宏定义#define COLOR_FORMAT_DEFAULT OMX_COLOR_FormatYVU420Planar 可以知道解码默认输出YVU420即YV12）

在gstreamer的openmax接口添加全志的颜色空间定义：

进入目录

cd output/build/gst-omx-1.16.0/

修改文件

vim omx/gstomxvideo.c

在函数gst_omx_video_get_format_from_omx的switch下添加case

case OMX_COLOR_FormatYVU420Planar:
format = GST_VIDEO_FORMAT_YV12;
break;

保存退出
:wq

在当前目录下删掉buildroot对于gst-omx的编译构建标记

rm .stamp_built .stamp_configured .stamp_target_installed .stamp_staging_installed

回到buildroot目录下

cd ../../../

再次编译

make

此时带gstream和openmax的文件系统构建完成
开机进行硬解码验证

gst-omx注册：

gstreamer使用openmax前要先进行注册

先备份一下注册文件

cp /etc/xdg/gstomx.conf /etc/xdg/gstomx.conf.bck

修改gst-omx插件注册文件

vi /etc/xdg/gstomx.conf

（注意使用vi时不要用方向键不然可能会乱码用hjkl键移动光标）

可以发现有两个omxh264dec 对这两个项添加或者替换以下键值对

core-name=/usr/lib/libOmxCore.so
component-name=OMX.allwinner.video.decoder.avc
hacks=no-component-role;no-disable-outport
（最后这个no-disable-outport一定要加不然无法解码）
此时注册gst-omx成功

最后一步！！！！！！
以下命令验证
使用gstreamer的插件openmax调用cedar硬解码

gst-launch-1.0 filesrc location=bad_apple.mp4 ! qtdemux ! h264parse ! omxh264dec ! autovideoconvert ! fbdevsink

命令简析
filesrc location= 要解码的文件
qtdemux 解容器输出视频流
h264parse 流格式转换
omxh264dec 输入视频流输出帧
autovideoconvert 帧格式转换
fbdevsink 显示在fb

使用ffmpeg的h264解码器进行软解对比效果

gst-launch-1.0 filesrc location=bad_apple.mp4 ! qtdemux ! avdec_h264 ! autovideoconvert ! fbdevsink

验证平台：
硬件荔枝派zero
linux 主线内核5.2荔枝派官方的
启动方式 TF卡
h264文件 bad_apple.mp4

其余的硬件编解码器可以用同样的方式使用
f1c100s也可以这样使用

至此硬解码连接通用音视频解码器的最后一公里已经完成了主要的多媒体功能已经步入正轨标志着v3s和f1c100s可以摆脱方案商的奇怪sdk 使用主流的开发框架进行开发

最后感谢前人的努力感谢aodzip 感谢挖坑网感谢晕哥

逸俊晨晖 · 2020-10-06 23:36:52

对比一下硬解和软解的命令
gst-launch-1.0 filesrc location=bad_apple.mp4 ! qtdemux ! h264parse ! omxh264dec ! autovideoconvert ! fbdevsink
gst-launch-1.0 filesrc location=bad_apple.mp4 ! qtdemux ! avdec_h264 ! autovideoconvert ! fbdevsink
硬解比软件多用了个gstreamer元件 h264parse
这是因为avdec_h264的sink(输入)视频流格式可以是avc和byte-stream 而omxh264dec的sink只能是byte-stream
而qtdemux的src（输出)的视频流格式是avc 所以要用元件 h264parse 将avc转化为byte-stream 给omxh264dec 不然是无法解码的

最近编辑记录逸俊晨晖 (2020-10-06 23:37:08)

达克罗德 · 2020-10-06 23:46:07

666，太厉害了！
如果要解码后和UI的layer合成叠加思路是怎么样的呢？

逸俊晨晖 · 2020-10-06 23:56:31

硬解码输出帧格式
omxh264dec解出来的帧为yvu420（YV12）然后经过元件 autovideoconvert 转换为BGR格式给fbdev显示
那能不能直接让解码器直接输出BGR格式呢？全志硬解码api上是支持的
但是openmax修改输出格式还没试验成功目前发现

1.在文件libcedarc\openmax\vdec\src\omx_vdec_aw_decoder_linux.c中
结构体成员eOutputPixelFormat被直接赋值帧格式常量可能直接修改这个常量就可以输出其他格式

2.然后在文件libcedarc\openmax\vdec\inc\omx_vdec_config.h
的宏定义#define COLOR_FORMAT_DEFAULT OMX_COLOR_FormatYVU420Planar 修改后可以改变默认的omx认为的帧格式

这两处应该是很大关系的

逸俊晨晖 · 2020-10-07 00:00:13

达克罗德说：

666，太厉害了！
如果要解码后和UI的layer合成叠加思路是怎么样的呢？

这个之前在荔枝派linux群听人说过要在坑卓里扒出de 有了de后可以分层输出图像会出4个fb设备对应不同的层而且fb设备除了可以显示rgb外还可以直接显示yuv 还有硬件放缩透明度等功能

aodzip · 2020-10-07 01:17:22

图层叠加直接用libdrm就可以

哇酷小二 · 2020-10-07 08:07:03

感谢楼主爆炸性分享，帮楼主补发一个解码播放现场的视频。

逸俊晨晖 · 2020-10-07 09:35:11

aodzip 说：

图层叠加直接用libdrm就可以

f1c100s的drm是可以直接用的
v3s的不能驱动有问题要去改

湘楚浪子 · 2020-10-07 09:42:58

逸俊晨晖说：

aodzip 说：
图层叠加直接用libdrm就可以
f1c100s的drm是可以直接用的
v3s的不能驱动有问题要去改

真是太6了，方便发一个固件吗?刚好有吃灰的荔枝派，我也试一试

逸俊晨晖 · 2020-10-07 14:11:33

镜像和使用方法
gst-omx硬解码镜像.zip

九重天 · 2020-10-07 15:23:22

逸俊晨晖说：

镜像和使用方法
gst-omx硬解码镜像.zip

亲测可用，感谢楼主，让我慢慢消化再请教。

god · 2020-10-07 21:35:36

超级赞，全志的坑被一群牛人都快填满了！

达克罗德 · 2020-10-09 23:08:38

逸俊晨晖说：

aodzip 说：
图层叠加直接用libdrm就可以
f1c100s的drm是可以直接用的
v3s的不能驱动有问题要去改

drm支持硬件叠加？以前玩过简单的drm，还不知道有这个功能

逸俊晨晖 · 2020-10-10 10:18:20

达克罗德说：

逸俊晨晖说：
aodzip 说：
图层叠加直接用libdrm就可以
f1c100s的drm是可以直接用的
v3s的不能驱动有问题要去改
drm支持硬件叠加？以前玩过简单的drm，还不知道有这个功能

可以硬件叠加层还能硬件层混色直接操作libdrm就行
目前发现f1c100s主线操作libdrm混色时背景层透明度一定要为满不然背景层前景层都不显示也就是说libdrm还是有一定的问题
v3s主线操作libdrm就直接不能显示

zhuyang220 · 2020-10-12 10:00:56

请教下v3s或者f1c100s上有没有h264硬件编码的能力？

逸俊晨晖 · 2020-10-12 22:36:11

zhuyang220 说：

请教下v3s或者f1c100s上有没有h264硬件编码的能力？

有的

f1c100_ · 2020-10-14 20:08:34

我用f1c100s试了下出现这个错误：
Setting pipeline to PAUSED ...
ERROR: Pipeline doesn't want to pause.
ERROR: from element /GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0: Could not initialize supporting library.
Additional debug info:
gstvideodecoder.c(2530): gst_video_decoder_change_state (): /GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0:
Failed to open decoder
Setting pipeline to NULL ...
Freeing pipeline

我在builroot没有看到gst1-plugins-bayer2rgb-neon这个选项，跟这个有关系吗

luoguojian6 · 2020-10-15 16:38:29

好东西，F1C100s看规格书只有JPG编码而已

逸俊晨晖 · 2020-10-15 23:12:09

f1c100_ 说：

我用f1c100s试了下出现这个错误：
Setting pipeline to PAUSED ...
ERROR: Pipeline doesn't want to pause.
ERROR: from element /GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0: Could not initialize supporting library.
Additional debug info:
gstvideodecoder.c(2530): gst_video_decoder_change_state (): /GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0:
Failed to open decoder
Setting pipeline to NULL ...
Freeing pipeline
我在builroot没有看到gst1-plugins-bayer2rgb-neon这个选项，跟这个有关系吗

你这个是gst-omx注册失败的问题把我发文件里的那个注册文件替换你原来的文件

逸俊晨晖 · 2020-10-15 23:14:34

luoguojian6 说：

好东西，F1C100s看规格书只有JPG编码而已

你这找资料能力和阅读能力要提升

f1c100_ · 2020-10-16 02:07:57

能调用了，但是报了一堆貌似内存不足的警告，根据aodzip的教程增加了那两个内存，开启swap分区还是不行，估计f1c100s内存太小了吧

孤星泪 · 2020-10-16 06:28:12

f1c100_ 说：

能调用了，但是报了一堆貌似内存不足的警告，根据aodzip的教程增加了那两个内存，开启swap分区还是不行，估计f1c100s内存太小了吧

那可以用widora的tiny200开发板，64M ddr

luoguojian6 · 2020-10-16 20:05:47

逸俊晨晖说：

luoguojian6 说：
好东西，F1C100s看规格书只有JPG编码而已
你这找资料能力和阅读能力要提升

还能编码其它视频格式吗？不就MJPEG和JPEG而已吗？
•H.264 1280x720@30fps decoding
•MPEG1/2/4 1280x720@30fps decoding
•MJPEG 1280x720@30fps encoding
•JPEG encode size up to 8192x8192

whyabc666 · 2020-10-16 21:36:50

arm9搞出视频720p编解码的爆破方案，海思Hi2518，3516的替代品！

tianjjff · 2020-10-28 11:50:30

逸俊晨晖说：

前置要求：
基于aodzip的cedar：
.....

楼主，请问下，添加case OMX_COLOR_FormatYVU420Planar:的时候，重新编译提示OMX_COLOR_FormatYVU420Planar没有定义，要怎么操作？

tianjjff · 2020-10-28 17:24:59

我直接在sysroot目录里OMX_IVCommon.h增加了这个OMX_COLOR_FormatYVU420Planar，可以编译通过了，不知道这样行不行

逸俊晨晖 · 2020-10-29 00:30:41

tianjjff 说：

我直接在sysroot目录里OMX_IVCommon.h增加了这个OMX_COLOR_FormatYVU420Planar，可以编译通过了，不知道这样行不行

这个东西是定义在全志提供的omx接口里的你看看你的buildroot是不是没正确添加libcedar

逸俊晨晖 · 2020-10-29 00:36:20

不要引用整个一楼帖子拉长了不好阅读

tianjjff · 2020-10-29 09:57:08

逸俊晨晖说：

不要引用整个一楼帖子拉长了不好阅读

好的；
那样搞运行一半就卡住了，估计得make clean重头来

hanzixi_angel · 2020-11-04 23:22:33

tianjjff 说：

逸俊晨晖说：
前置要求：
基于aodzip的cedar：
.....
楼主，请问下，添加case OMX_COLOR_FormatYVU420Planar:的时候，重新编译提示OMX_COLOR_FormatYVU420Planar没有定义，要怎么操作？

缺少定义的你解决了吗怎么解决的我这也遇到了相同的问题亲赐教吗谢谢

hanzixi_angel · 2020-11-04 23:25:58

逸俊晨晖说：

tianjjff 说：
我直接在sysroot目录里OMX_IVCommon.h增加了这个OMX_COLOR_FormatYVU420Planar，可以编译通过了，不知道这样行不行
这个东西是定义在全志提供的omx接口里的你看看你的buildroot是不是没正确添加libcedar

大佬我也遇到同样缺少定义的问题请问这个定义在哪望指教谢谢

hanzixi_angel · 2020-11-05 00:34:38

# gst-launch-1.0 filesrc location=bad_apple.mp4 ! qtdemux ! h264parse ! omxh264d
ec ! autovideoconvert ! fbdevsink
WARNING: erroneous pipeline: no element "omxh264dec"

报错 no element "omxh264dec" 无法播放视频软解是可以播放的
查看/usr/lib目录并没有/usr/lib/libOmxCore.so这个文件请问这个文件是如何生成的是buildroot编译生成的吗

逸俊晨晖 · 2020-11-05 01:00:25

hanzixi_angel 说：

# gst-launch-1.0 filesrc location=bad_apple.mp4 ! qtdemux ! h264parse ! omxh264d
ec ! autovideoconvert ! fbdevsink
WARNING: erroneous pipeline: no element "omxh264dec"
报错 no element "omxh264dec" 无法播放视频软解是可以播放的
查看/usr/lib目录并没有/usr/lib/libOmxCore.so这个文件请问这个文件是如何生成的是buildroot编译生成的吗

libcedarc\openmax\omxcore\Makefile.am说明此路径产生libOmxCore.so 没有就说明前置贴没配好就是帖子顶部那个链接

whyabc666 · 2020-11-08 23:59:29

逸俊晨晖说：

对比一下硬解和软解的命令
gst-launch-1.0 filesrc location=bad_apple.mp4 ! qtdemux ! h264parse ! omxh264dec ! autovideoconvert ! fbdevsink
gst-launch-1.0 filesrc location=bad_apple.mp4 ! qtdemux ! avdec_h264 ! autovideoconvert ! fbdevsink
硬解比软件多用了个gstreamer元件 h264parse
这是因为avdec_h264的sink(输入)视频流格式可以是avc和byte-stream 而omxh264dec的sink只能是byte-stream
而qtdemux的src（输出)的视频流格式是avc 所以要用元件 h264parse 将avc转化为byte-stream 给omxh264dec 不然是无法解码的

硬解比软件多用了个gstreamer元件 h264parse
root@abc-ThinkPad-X200:/home/abc# gst-launch-1.0 filesrc location=/home/abc/stream_chn0.h264 ! avdec_h264 ! ximagesink
Setting pipeline to PAUSED ...
Pipeline is PREROLLING ...
Caught SIGSEGV
#0 0xb7748cb0 in ?? ()
Spinning. Please run 'gdb gst-launch-1.0 7599' to continue debugging, Ctrl-C to quit, or Ctrl-\ to dump core.

avb · 2020-11-23 02:45:45

tried but without success

gst-launch-1.0 filesrc location=/storage/bad_apple.mp4 ! qtdemux ! h264parse !
 omxh264dec ! autovideoconvert ! fbdevsink
Setting pipeline to PAUSED ...
debug  : cedarc <AwOmxComponentInit:26>:OMXCORE: aw_omx_component_init 133b30

debug  : omx_vdec <__AwOmxVdecInit:1059>:++++++++++++++++++++++omx begin++++++++++++++++++
debug  : omx_vdec <__AwOmxVdecInit:1060>:name = OMX.allwinner.video.decoder.avc
debug  : omx_vdec_aw <OmxDecoderCreate:924>:kay: ** 0.
debug  : cedarc <CdcMessageQueueCreate:47>:nMessageSize = 20
debug  : cedarc <AwOmxComponentSetCallbacks:309>:OMXCORE: aw_omx_component_set_callbacks 133b30, b66d3500 , f00c0

debug  : omx_vdec <__AwOmxVdecSetCallbacks:1812>:===== vdec set callbacks
Pipeline is PREROLLING ...
debug  : omx_vdec <AwOmxVdecPortSetDefinitioin:190>:port:<<<<<<<<in,nBufferCountActual = 2, mBufferCntActual = 2
debug  : omx_vdec <AwOmxVdecPortSetDefinitioin:190>:port:<<<<<<<<in,nBufferCountActual = 2, mBufferCntActual = 2
error  : omx_vdec <AwOmxVdecPortGetFormat:288>:erro: pParamData->nIndex > m_sPortFormatType.nIndex
**
ERROR:gstomxvideodec.c:2120:gst_omx_video_dec_negotiate: assertion failed: (l != NULL)
Bail out! ERROR:gstomxvideodec.c:2120:gst_omx_video_dec_negotiate: assertion failed: (l != NULL)
Aborted
#

linux 5.2.1 (also 5.4.35 mentioned by aodzip)
libcedarc & gst-omx-1.16.2
on v3s

最近编辑记录 avb (2020-11-23 02:47:34)

QinChi · 2020-11-26 19:52:55

# gst-launch-1.0 filesrc location=bad_apple.mp4 ! qtdemux ! h264parse ! omxh264d
ec ! autovideoconvert ! fbdevsink
Setting pipeline to PAUSED ...
OMX-Cannot open OpenMAX registry file /root/.omxregister
OMX-A Component loader constructor fails. Exiting
ERROR: Pipeline doesn't want to pause.
ERROR: from element /GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0: Could not initialize supporting library.
Additional debug info:
../gst-libs/gst/video/gstvideodecoder.c(2517): gst_video_decoder_change_state (): /GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0:
Failed to open decoder
Setting pipeline to NULL ...
Freeing pipeline ...

#

linux 5.4.77
libcedarc & gst-omx-1.16.2
on widora-r3
始终都无法走到下一步，按照步骤做不下去了

逸俊晨晖 · 2020-11-26 22:23:21

40楼
看gstreamer相关资料

41楼
gst-omx认不出全志在openmax自己定义的颜色空间
看一楼的openmax接口修改部分
一种可能是没按照我说的添加颜色空间另一种可能是添加了但是buildroot编译标记没清理好导致改的没编译

42楼
gst对omx注册失败
看一楼的gst-omx注册部分

wupaul2001 · 2020-11-27 15:49:34

逸俊晨晖说：

40楼
看gstreamer相关资料
41楼
gst-omx认不出全志在openmax自己定义的颜色空间
看一楼的openmax接口修改部分
一种可能是没按照我说的添加颜色空间另一种可能是添加了但是buildroot编译标记没清理好导致改的没编译
42楼
gst对omx注册失败
看一楼的gst-omx注册部分

你在説我踩DE的坑吗？我已经完全填好了，只是还没有共享上来。F1C那个不能半透的BUG，在V3s上也有，我已经填好

无情一刀 · 2020-12-09 10:36:43

逸俊晨晖说：

对比一下硬解和软解的命令
gst-launch-1.0 filesrc location=bad_apple.mp4 ! qtdemux ! h264parse ! omxh264dec ! autovideoconvert ! fbdevsink
gst-launch-1.0 filesrc location=bad_apple.mp4 ! qtdemux ! avdec_h264 ! autovideoconvert ! fbdevsink
硬解比软件多用了个gstreamer元件 h264parse
这是因为avdec_h264的sink(输入)视频流格式可以是avc和byte-stream 而omxh264dec的sink只能是byte-stream
而qtdemux的src（输出)的视频流格式是avc 所以要用元件 h264parse 将avc转化为byte-stream 给omxh264dec 不然是无法解码的

我这里使用软解提示我没有avdec_h264现在没有播放成功是

油董 · 2020-12-09 12:02:11

膜拜大佬，可以愉快地使用编解码库了

已完成。成。成。 · 2020-12-12 07:59:03

# gst-launch-1.0 filesrc location=/testfile/bad_apple.mp4 ! qtdemux ! h264parse
! omxh264dec ! autovideoconvert ! fbdevsink
Setting pipeline to PAUSED ...
ERROR: Pipeline doesn't want to pause.
ERROR: from element /GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0: Could not initialize supporting library.
Additional debug info:
../gst-libs/gst/video/gstvideodecoder.c(2517): gst_video_decoder_change_state (): /GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0:
Failed to open decoder
Setting pipeline to NULL ...
Freeing pipeline ...

在Widora mangopi R3的板子上基于aodzip大佬的buildroot修改，配置文件来自gst-omx.zip无修改依然无法使用

yuanhao0230 · 2020-12-16 22:43:01

逸俊晨晖说：

镜像和使用方法
gst-omx硬解码镜像.zip

大神，可否帮忙生成一个f1v100s+800*480的镜像，感激不尽啊……

b7376811 · 2020-12-17 21:53:32

谢谢大佬分享，在荔枝派zero上移植成功

流氓兔 · 2020-12-19 10:19:21

已完成。成。成。说：

# gst-launch-1.0 filesrc location=/testfile/bad_apple.mp4 ! qtdemux ! h264parse
! omxh264dec ! autovideoconvert ! fbdevsink
Setting pipeline to PAUSED ...
ERROR: Pipeline doesn't want to pause.
ERROR: from element /GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0: Could not initialize supporting library.
Additional debug info:
../gst-libs/gst/video/gstvideodecoder.c(2517): gst_video_decoder_change_state (): /GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0:
Failed to open decoder
Setting pipeline to NULL ...
Freeing pipeline ...
在Widora mangopi R3的板子上基于aodzip大佬的buildroot修改，配置文件来自gst-omx.zip无修改依然无法使用

# gst-launch-1.0 filesrc location=97.mp4 ! qtdemux ! h264parse ! omxh264dec ! au
tovideoconvert ! fbdevsink
Setting pipeline to PAUSED ...
OMX-Cannot open OpenMAX registry file //.omxregister
OMX-A Component loader constructor fails. Exiting
ERROR: Pipeline doesn't want to pause.
ERROR: from element /GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0: Could not initialize supporting library.
Additional debug info:
../gst-libs/gst/video/gstvideodecoder.c(2517): gst_video_decoder_change_state (): /GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0:
Failed to open decoder
Setting pipeline to NULL ...
Freeing pipeline ...
#
#

我的 widora tiny200 r3 也是一样的问题，都是64M DRAM, 肯定不是内存不够的原因，这是为什么呢？
软件也是可以跑的，只是很慢很慢。

流氓兔 · 2020-12-19 10:57:30

yuanhao0230 说：

逸俊晨晖说：
镜像和使用方法
gst-omx硬解码镜像.zip
大神，可否帮忙生成一个f1v100s+800*480的镜像，感激不尽啊……

我的荔枝派视频解码时候, cpu占用率100%, 这样正常吗？

秦皇岛岛主 · 2020-12-31 17:04:29

标记

逸俊晨晖 · 2021-01-07 23:44:39

用歪朵拉的老法师们看这个帖子
https://whycan.com/t_5824.html

逸俊晨晖 · 2021-01-07 23:48:12

流氓兔说：

yuanhao0230 说：
逸俊晨晖说：
镜像和使用方法
gst-omx硬解码镜像.zip
大神，可否帮忙生成一个f1v100s+800*480的镜像，感激不尽啊……
https://whycan.com/files/members/3078/2020-12-19_105626.png
我的荔枝派视频解码时候, cpu占用率100%, 这样正常吗？

硬解出来的YV12要经过软件转换成RGB再显示在屏幕上估计是这里占了CPU 把DE用起来就会占这么多了

R1CHIE · 2021-01-13 10:18:40

大佬你好，请问你用的buildroot是哪个版本的？2017.08是没有gst1-plugins-bayer2rgb-neon这个选项的。

逸俊晨晖 · 2021-01-15 01:40:21

R1CHIE 说：

大佬你好，请问你用的buildroot是哪个版本的？2017.08是没有gst1-plugins-bayer2rgb-neon这个选项的。

buildroot-2019.08 没有的话去掉看看行不行

shaoxi2010 · 2021-02-05 14:09:18

大佬，同样的思路我在R818上试了下，有个段错误啊有没有什么思路

# gst-launch-1.0 filesrc location=2.mp4 ! qtdemux ! h264parse ! omxh264dec ! aut
ovideoconvert ! fbdevsink
Setting pipeline to PAUSED ...
debug  : cedarc <AwOmxComponentInit:38>:OMXCORE: aw_omx_component_init 27d7f5e0

debug  : omx_vdec <__AwOmxVdecInit:1139>:++++++++++++++++++++++omx begin++++++++++++++++++
debug  : omx_vdec <__AwOmxVdecInit:1140>:name = OMX.allwinner.video.decoder.avc
debug  : cedarc <CdcMessageQueueCreate:51>:nMessageSize = 40
debug  : cedarc <AwOmxComponentSetCallbacks:331>:OMXCORE: aw_omx_component_set_callbacks 27d7f5e0, 9b650958 , 27e2b
3b0

debug  : omx_vdec <__AwOmxVdecSetCallbacks:1890>:===== vdec set callbacks
Pipeline is PREROLLING ...
debug  : omx_vdec <AwOmxVdecPortSetDefinitioin:191>:port:<<<<<<<<in,nBufferCountActual = 2, mBufferCntActual = 2
debug  : omx_vdec <AwOmxVdecPortSetDefinitioin:191>:port:<<<<<<<<in,nBufferCountActual = 2, mBufferCntActual = 2
error  : omx_vdec <AwOmxVdecPortGetFormat:280>:erro: pParamData->nIndex > m_sPortFormatType.nIndex
debug  : omx_vdec <controlSetState:419>:current state:OMX_StateLoaded, target state:OMX_StateIdle
debug  : omx_vdec <doStateWaitforResources2Idle:629>:bEnabled[1],[1],bPopulated[0],[0]
debug  : omx_vdec <AwOmxVdecPortAddBuffer:390>:<<<<<<<<in port add buffer: 0x7f99135010
debug  : omx_vdec <AwOmxVdecPortAddBuffer:390>:<<<<<<<<in port add buffer: 0x7f98b34010
Caught SIGSEGV
debug  : omx_vdec <doStateWaitforResources2Idle:629>:bEnabled[1],[1],bPopulated[1],[0]
exec gdb failed: No such file or directory
debug  : omx_vdec <doStateWaitforResources2Idle:629>:bEnabled[1],[1],bPopulated[1],[0]
Spinning.  Please run 'gdb gst-launch-1.0 1101' to continue debugging, Ctrl-C to quit, or Ctrl-\ to dump core.
debug  : omx_vdec <doStateWaitforResources2Idle:629>:bEnabled[1],[1],bPopulated[1],[0]
....
debug  : omx_vdec <doStateWaitforResources2Idle:629>:bEnabled[1],[1],bPopulated[1],[0]
warning: omx_vdec <doStateWaitforResources2Idle:644>:Idle transition failed

warning: omx_vdec <controlSetState:449>:Transit current state:OMX_StateLoaded --> target state:OMX_StateIdle --Fail
ed!

554968413 · 2021-04-29 17:19:26

该评论内容与本帖子无关,鼓励各位坑友积极发言讨论与帖子有关的内容！

niyazfattahov · 2021-09-14 14:48:52

can I encode video from camera using gst-launch?

I add this

[omxh264enc]
type-name=GstOMXH264Enc
core-name=/usr/lib/libOmxCore.so
component-name=OMX.allwinner.video.encoder.avc
rank=0
in-port-index=0
out-port-index=1
When I run
gst-launch-1.0 -vvv v4l2src device=/dev/video0 num-buffers=1000 ! 'video/x-raw, width=640, height=480, format=(string)I420' ! omx264enc ! avimux ! filesink location=videotestsrc.avi

WARNING: erroneous pipeline: no element "omx264enc"

with ffmpeg I can encode max 640x480 at ~ 53fps with cedarx codec and libcedarc from aodzip and get 100% cpu load

wakerze · 2022-03-11 15:56:40

我这儿也是
Setting pipeline to PAUSED ...
ERROR: Pipeline doesn't want to pause.
ERROR: from element /GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0: Could not initialize supporting library.
Additional debug info:
gstvideodecoder.c(2530): gst_video_decoder_change_state (): /GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0:
Failed to open decoder
Setting pipeline to NULL ...
Freeing pipeline ...

错误

18328089946 · 2022-03-16 17:57:30

同样出现了conf文件修改造成的pipe问题。

是按照上面修改的。

buildroot里面没有install gst-launch & 那个选项。只有install tools

flfq · 2022-04-20 04:33:40

按教程运行后出现这样的错误

# gst-launch-1.0 filesrc location=/root/test.mp4 ! qtdemux ! h264parse ! omxh264
dec ! autovideoconvert ! fbdevsink

Setting pipeline to PAUSED ...
debug : cedarc <AwOmxComponentInit:26>:OMXCORE: aw_omx_component_init 160500

debug : omx_vdec <__AwOmxVdecInit:1059>:++++++++++++++++++++++omx begin++++++++++++++++++
debug : omx_vdec <__AwOmxVdecInit:1060>:name = OMX.allwinner.video.decoder.avc
debug : omx_vdec_aw <OmxDecoderCreate:924>:kay: ** 0.
debug : cedarc <CdcMessageQueueCreate:47>:nMessageSize = 20
debug : cedarc <AwOmxComponentSetCallbacks:310>:OMXCORE: aw_omx_component_set_callbacks 160500, b65f0488 , 3a5e8

debug : omx_vdec <__AwOmxVdecSetCallbacks:1812>:===== vdec set callbacks
Pipeline is PREROLLING ...
debug : omx_vdec <AwOmxVdecPortSetDefinitioin:192>:port:<<<<<<<<in,nBufferCountActual = 2, mBufferCntActual = 2
debug : omx_vdec <AwOmxVdecPortSetDefinitioin:192>:port:<<<<<<<<in,nBufferCountActual = 2, mBufferCntActual = 2
error : omx_vdec <AwOmxVdecPortGetFormat:288>:erro: pParamData->nIndex > m_sPortFormatType.nIndex
**
ERROR:gstomxvideodec.c:1804:gst_omx_video_dec_negotiate: assertion failed: (l != NULL)
Aborted

flfq · 2022-04-20 14:34:48

@逸俊晨晖
这个问题，你搞定了没有

ronz · 2022-04-27 01:03:19

我倒是可以編譯通過了，用的buildroot-2021.02.7, 沒有開啓 gst1-plugins-bayer2rgb-neon

v3s,主線linux5.2

# gst-launch-1.0 filesrc location=h2demo.mp4 ! h264parse ! omxh264dec ! autovideoconvert ! fbdevsink
Setting pipeline to PAUSED ...
* failed to open vchiq instance

最近编辑记录 ronz (2022-04-27 01:04:14)

ronz · 2022-04-28 14:02:45

我又换成了buildroot 2020.08.3 （还保留了bellagio），主线linux5.2，移植了libcedar
# ls /dev/
bus/ ptys7 tty36 ttyr8
cec0 ptys8 tty37 ttyr9
cec1 ptys9 tty38 ttyra
cedar_dev ptysa tty39 ttyrb
console ptysb tty4 ttyrc
cpu_dma_latency ptysc tty40 ttyrd
fb0 ptysd tty41 ttyre
fd/ ptyse tty42 ttyrf
full ptysf tty43 ttys0
gpiochip0 ptyt0 tty44 ttys1
i2c-0 ptyt1 tty45 ttys2
ion ptyt2 tty46 ttys3
kmsg ptyt3 tty47 ttys4
log ptyt4 tty48 ttys5
media0 ptyt5 tty49 ttys6
media1 ptyt6 tty5 ttys7

# gst-launch-1.0 filesrc location=/root/h2demo.mp4 ! qtdemux ! h264parse ! omxh2
64dec ! autovideoconvert ! fbdevsink
WARNING: erroneous pipeline: no element "h264parse"

# gst-inspect-1.0 --gst-debug-level=4 h264parse
0:00:00.003252875 175 0x3ce80 INFO GST_INIT gstmessage.c:128:_priv_gst_message_initialize: init messages
0:00:00.007057209 175 0x3ce80 INFO GST_INIT gstcontext.c:84:_priv_gst_context_initialize: init contexts
0:00:00.008619625 175 0x3ce80 INFO GST_PLUGIN_LOADING gstplugin.c:318:_priv_gst_plugin_initialize: registering 0 static plugins
0:00:00.009887167 175 0x3ce80 INFO GST_PLUGIN_LOADING gstplugin.c:226:gst_plugin_register_static: registered static plugin "staticelements"
0:00:00.010048917 175 0x3ce80 INFO GST_PLUGIN_LOADING gstplugin.c:228:gst_plugin_register_static: added static plugin "staticelements", result: 1
0:00:00.010163542 175 0x3ce80 INFO GST_REGISTRY gstregistry.c:1720:ensure_current_registry: reading registry cache: /root/.cache/gstreamer-1.0/registry.cortex-a7.bin
0:00:00.027715000 175 0x3ce80 INFO GST_REGISTRY gstregistrybinary.c:621:priv_gst_registry_binary_read_cache: loaded /root/.cache/gstreamer-1.0/registry.cortex-a7.bin in 0.017286 seconds
0:00:00.028062625 175 0x3ce80 INFO GST_REGISTRY gstregistry.c:1579:scan_and_update_registry: Validating plugins from registry cache: /root/.cache/gstreamer-1.0/registry.cortex-a7.bin
0:00:00.029380834 175 0x3ce80 INFO GST_REGISTRY gstregistry.c:1678:scan_and_update_registry: Registry cache has not changed
0:00:00.029535042 175 0x3ce80 INFO GST_REGISTRY gstregistry.c:1755:ensure_current_registry: registry reading and updating done, result = 1
0:00:00.029615750 175 0x3ce80 INFO GST_INIT gst.c:806:init_post: GLib runtime version: 2.64.4
0:00:00.029683709 175 0x3ce80 INFO GST_INIT gst.c:808:init_post: GLib headers version: 2.64.4
0:00:00.029729792 175 0x3ce80 INFO GST_INIT gst.c:810:init_post: initialized GStreamer successfully

请问大佬啥原因？

鱼尾 · 2022-04-29 15:29:03

# cp /etc/xdg/gstomx.conf /etc/xdg/gstomx.conf.bck
# vi /etc/xdg/gstomx.conf
# gst-launch-1.0 filesrc location=222.mp4 ! qtdemux ! h264parse ! omxh264dec ! a
utovideoconvert ! fbdevsink
Setting pipeline to PAUSED ...
debug : cedarc <AwOmxComponentInit:26>:OMXCORE: aw_omx_component_init 15de58

debug : omx_vdec <__AwOmxVdecInit:1059>:++++++++++++++++++++++omx begin++++++++++++++++++
debug : omx_vdec <__AwOmxVdecInit:1060>:name = OMX.allwinner.video.decoder.avc
debug : omx_vdec_aw <OmxDecoderCreate:924>:kay: ** 0.
debug : cedarc <CdcMessageQueueCreate:47>:nMessageSize = 20
debug : cedarc <AwOmxComponentSetCallbacks:310>:OMXCORE: aw_omx_component_set_callbacks 15de58, b66cb700 , 39600

debug : omx_vdec <__AwOmxVdecSetCallbacks:1812>:===== vdec set callbacks
Pipeline is PREROLLING ...
debug : omx_vdec <AwOmxVdecPortSetDefinitioin:192>:port:<<<<<<<<in,nBufferCountActual = 2, mBufferCntActual = 2
debug : omx_vdec <AwOmxVdecPortSetDefinitioin:192>:port:<<<<<<<<in,nBufferCountActual = 2, mBufferCntActual = 2
error : omx_vdec <AwOmxVdecPortGetFormat:288>:erro: pParamData->nIndex > m_sPortFormatType.nIndex
debug : omx_vdec <controlSetState:359>:current state:OMX_StateLoaded, target state:OMX_StateIdle
debug : omx_vdec <doStateWaitforResources2Idle:563>:bEnabled[1],[1],bPopulated[0],[0]
debug : omx_vdec <__AwOmxVdecAllocateBuffer:1693>:kay: __AwOmxVdecAllocateBuffer
debug : omx_vdec <__AwOmxVdecAllocateBuffer:1713>:kay: __AwOmxVdecAllocateBuffer 2
debug : omx_vdec_aw <__liAllocatePortBuffer:851>:kay: *** 0.
debug : omx_vdec_aw <__liAllocatePortBuffer:863>:kay: malloc
debug : omx_vdec_aw <__liAllocatePortBuffer:865>:kay: malloc2
debug : omx_vdec <__AwOmxVdecAllocateBuffer:1715>:kay: __AwOmxVdecAllocateBuffer 3
debug : omx_vdec <AwOmxVdecPortPopBuffer:393>:*******port pop buffer:<<<<<<<<in
debug : omx_vdec <__AwOmxVdecAllocateBuffer:1693>:kay: __AwOmxVdecAllocateBuffer
debug : omx_vdec <__AwOmxVdecAllocateBuffer:1713>:kay: __AwOmxVdecAllocateBuffer 2
debug : omx_vdec_aw <__liAllocatePortBuffer:851>:kay: *** 0.
debug : omx_vdec_aw <__liAllocatePortBuffer:863>:kay: malloc
debug : omx_vdec_aw <__liAllocatePortBuffer:865>:kay: malloc2
debug : omx_vdec <__AwOmxVdecAllocateBuffer:1715>:kay: __AwOmxVdecAllocateBuffer 3
debug : omx_vdec <AwOmxVdecPortPopBuffer:393>:*******port pop buffer:<<<<<<<<in
debug : omx_vdec <__AwOmxVdecAllocateBuffer:1693>:kay: __AwOmxVdecAllocateBuffer
debug : omx_vdec <__AwOmxVdecAllocateBuffer:1713>:kay: __AwOmxVdecAllocateBuffer 2
debug : omx_vdec_aw <__liAllocatePortBuffer:851>:kay: *** 0.
debug : omx_vdec_aw <__liAllocatePortBuffer:863>:kay: malloc
debug : omx_vdec_aw <__liAllocatePortBuffer:865>:kay: malloc2
debug : omx_vdec <__AwOmxVdecAllocateBuffer:1715>:kay: __AwOmxVdecAllocateBuffer 3
debug : omx_vdec <AwOmxVdecPortPopBuffer:393>:*******port pop buffer:>>>>>>>out
debug : omx_vdec <__AwOmxVdecAllocateBuffer:1693>:kay: __AwOmxVdecAllocateBuffer
debug : omx_vdec <__AwOmxVdecAllocateBuffer:1713>:kay: __AwOmxVdecAllocateBuffer 2
debug : omx_vdec_aw <__liAllocatePortBuffer:851>:kay: *** 0.
debug : omx_vdec_aw <__liAllocatePortBuffer:863>:kay: malloc
debug : omx_vdec_aw <__liAllocatePortBuffer:865>:kay: malloc2
debug : omx_vdec <__AwOmxVdecAllocateBuffer:1715>:kay: __AwOmxVdecAllocateBuffer 3
debug : omx_vdec <AwOmxVdecPortPopBuffer:393>:*******port pop buffer:>>>>>>>out
debug : omx_vdec <__AwOmxVdecAllocateBuffer:1693>:kay: __AwOmxVdecAllocateBuffer
debug : omx_vdec <__AwOmxVdecAllocateBuffer:1713>:kay: __AwOmxVdecAllocateBuffer 2
debug : omx_vdec_aw <__liAllocatePortBuffer:851>:kay: *** 0.
debug : omx_vdec_aw <__liAllocatePortBuffer:863>:kay: malloc
debug : omx_vdec_aw <__liAllocatePortBuffer:865>:kay: malloc2
debug : omx_vdec <__AwOmxVdecAllocateBuffer:1715>:kay: __AwOmxVdecAllocateBuffer 3
debug : omx_vdec <AwOmxVdecPortPopBuffer:393>:*******port pop buffer:>>>>>>>out
debug : omx_vdec <__AwOmxVdecAllocateBuffer:1693>:kay: __AwOmxVdecAllocateBuffer

大佬这个是啥原因

鱼尾 · 2022-04-29 15:55:48

ERROR:gstomxbufferpool.c:419:gst_omx_buffer_pool_alloc_buffer: code should not be reached
Aborted

zhou · 2022-05-16 16:45:06

楼主MPEG-1 Layer 3这个插件在Buildroot哪个位置选择
ERROR [1970-01-01 08:47:40.794009 | gstreamer] uridecodebin1: Error: Your GStreamer installation is missing a plug-in. (Debug: ../gst/playback/gsturidecodebin.c(1027): no_more_pads_full (): /GstPlayBin:play/GstURIDecodeBin:uridecodebin1:
no suitable plugins found:
../gst/playback/gstdecodebin2.c(4720): gst_decode_bin_expose (): /GstPlayBin:play/GstURIDecodeBin:uridecodebin1/GstDecodeBin:decodebin1:
no suitable plugins found:
Missing decoder: MPEG-1 Layer 3 (MP3) (audio/mpeg, mpegversion=(int)1, layer=(int)3, parsed=(boolean)false)
)
ERROR [1970-01-01 08:47:40.799390 | gstreamer] source: Error: Internal data stream error. (Debug: ../libs/gst/base/gstbasesrc.c(3127): gst_base_src_loop (): /GstPlayBin:play/GstURIDecodeBin:uridecodebin1/GstSoupHTTPSrc:source:
streaming stopped, reason not-linked (-1))

coldj · 2022-10-12 15:43:11

utovideoconvert ! fbdevsink
Setting pipeline to PAUSED ...
debug : cedarc <AwOmxComponentInit:26>:OMXCORE: aw_omx_component_init 115170

debug : omx_vdec <__AwOmxVdecInit:1059>:++++++++++++++++++++++omx begin++++++++++++++++++
debug : omx_vdec <__AwOmxVdecInit:1060>:name = OMX.allwinner.video.decoder.avc
debug : omx_vdec_aw <OmxDecoderCreate:924>:kay: ** 0.
debug : cedarc <CdcMessageQueueCreate:47>:nMessageSize = 20
debug : cedarc <AwOmxComponentSetCallbacks:310>:OMXCORE: aw_omx_component_set_callbacks 115170, b671dc34 , dc8c8

debug : omx_vdec <__AwOmxVdecSetCallbacks:1812>:===== vdec set callbacks
Pipeline is PREROLLING ...
WARNING: from element /GstPipeline:pipeline0/GstQTDemux:qtdemux0: Delayed linking failed.
Additional debug info:
../gst/parse/grammar.y(510): gst_parse_no_more_pads (): /GstPipeline:pipeline0/GstQTDemux:qtdemux0:
failed delayed linking some pad of GstQTDemux named qtdemux0 to some pad of GstH264Parse named h264parse0
ERROR: from element /GstPipeline:pipeline0/GstQTDemux:qtdemux0: Internal data stream error.
Additional debug info:
../gst/isomp4/qtdemux.c(6605): gst_qtdemux_loop (): /GstPipeline:pipeline0/GstQTDemux:qtdemux0:
streaming stopped, reason not-linked (-1)
ERROR: pipeline doesn't want to preroll.
Setting pipeline to NULL ...
debug : cedarc <AwOmxComponentDeinit:47>:OMXCORE: aw_omx_component_deinit 115170

debug : omx_vdec <__AwOmxVdecComponentDeinit:1829>:Omx Vdec Component Deinit begin
debug : omx_vdec <onMessageReceived:786>:********quit************
debug : omx_sem <OmxTryPostSem:119>:post sem:flushSem
Caught SIGSEGV
exec gdb failed: No such file or directory
Spinning. Please run 'gdb gst-launch-1.0 326' to continue debugging, Ctrl-C to quit, or Ctrl-\ to dump core.

有谁出现我这个情况吗？我这个看起来好像是gstreamer没有跑起来

coldj · 2022-10-12 15:46:27

逸俊晨晖说：

R1CHIE 说：
大佬你好，请问你用的buildroot是哪个版本的？2017.08是没有gst1-plugins-bayer2rgb-neon这个选项的。
buildroot-2019.08 没有的话去掉看看行不行

大佬能知道你使用这个时候编译链用的外部编译链还是buildroot自带的编译链吗？

coldj · 2022-10-12 19:12:20

@coldj
我现在搞好了，可以正常解码了，不过有一些问题。第一个我只能使用那个bad_apple.mp4，这个mp4有什么特异的点吗？如果我使用我自己的MP4就会出现我这个报错，大家都是mp4，不至于吧（苦笑）
然后关于erro: pParamData->nIndex > m_sPortFormatType.nIndex，我也遇到了。
我make clean之后发现我原来的地方没有修改到，可是在此之前我已经修改了，我做了如下操作。

cd output/build/gst-omx-1.16.0/
rm .stamp_built .stamp_configured .stamp_target_installed .stamp_staging_installed
cd ./../gst1-plugins-good-1.16.0
rm .stamp_built .stamp_configured .stamp_target_installed
cd ../gst1-plugins-bad-1.16.0/
rm .stamp_built .stamp_configured .stamp_target_installed .stamp_staging_installed
cd ../gst1-libav-1.16.0/
rm .stamp_built .stamp_configured .stamp_target_installed
cd ../../../
rm output/target/usr/lib/gstreamer-1.0/libgstlibav.so
make

然后重新烧录之后完成。linux使用官方5.2 buildroot使用2019-08

edisondeng · 2022-11-29 08:50:43

我按照 https://whycan.com/t_4219.html 配置好 5.4，启动后没有 cedar 与 ion 设备。有哪位朋友能帮帮，谢谢了

卖菜老汉 · 2022-12-01 14:52:09

楼主请问解码时这是什么问题；
Setting pipeline to PAUSED ...
INFO : cedarc <VeInitialize:1307>: *** ic_version = 0x1301000010210,
[ 1551.343311] VE: VE real_freq=576000000
[ 1551.343311]
INFO : cedarc <VeRelease:1476>: not malloc locks

INFO : cedarc <VeInitialize:1307>: *** ic_version = 0x1301000010210,
ERROR: Pipeline doesn't want to pause.
ERROR: from element /GstPipeline:pipeline0/GstFileSrc:filesrc0: Resource not found.
Additional debug info:
gstfilesrc.c(533): gst_file_src_start (): /GstPipeline:pipeline0/GstFileSrc:filesrc0:
No such file "bad_apple.mp4"
Setting pipeline to NULL ...
Caught SIGSEGV
#0 0xb6c9e894 in __libc_do_syscall () from /lib/libpthread.so.0
#1 0xb6c96384 in pthread_join () from /lib/libpthread.so.0
#2 0xb628173e in __AwOmxVdecComponentDeinit (hComponent=0x196e970)
#3 0xb63491da in AwOmxComponentDeinit (pHComp=0x196e970)
#4 0xb634a384 in OMX_FreeHandle (hComp=0x196e970) at aw_omx_core.c:467
#5 0xb6696010 in ?? () from /usr/lib/gstreamer-1.0/libgstomx.so
Spinning. Please run 'gdb gst-launch-1.0 9200' to continue debugging, Ctrl-C to quit, or Ctrl-\ to dump core.

卖菜老汉 · 2022-12-01 14:58:00

@卖菜老汉

@卖菜老汉
在解264文件时会出，解MP4文件反而不会。
c ! autovideoconvert ! fbdevsinkn=MVI_0935.MP4 ! qtdemux ! h264parse ! omxh264dec
Setting pipeline to PAUSED ...
INFO : cedarc <VeInitialize:1307>: *** ic_version = 0x1301000010210,
[ 1979.205343] VE: VE real_freq=576000000
[ 1979.205343]
INFO : cedarc <VeRelease:1476>: not malloc locks

INFO : cedarc <VeInitialize:1307>: *** ic_version = 0x1301000010210,
Pipeline is PREROLLING ...
ERROR : omx_vdec <AwOmxVdecPortGetFormat:348>: erro: pParamData->nIndex[1] > m_sPortFormatType.nIndex[0]
WARNING: cedarc <AddVDPlugin:1574>: 1117 get local path: /usr/lib/
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libaw_aacdec.so
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libaw_alacdec.so
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libaw_amrdec.so
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libaw_apedec.so
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libaw_atrcdec.so
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libaw_cookdec.so
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libaw_dsddec.so
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libaw_flacdec.so
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libaw_g729dec.so
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit[ 1979.451990] VE: VE real_freq=576000000
[ 1979.451990]
not found.
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libaw_mp3dec.so
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libaw_oggdec.so
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libaw_opusdec.so
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libaw_radec.so
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libaw_siprdec.so
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libaw_wavdec.so
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libawavs.so
INFO : cedarc <CedarPluginVDInit:76>: register avs decoder success!
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libawavs2.so
INFO : cedarc <CedarPluginVDInit:73>: register avs2 decoder success!
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libawh264.so
INFO : cedarc <CedarPluginVDInit:79>: register h264 decoder success!
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libawh265.so
INFO : cedarc <CedarPluginVDInit:85>: register h265 decoder success!
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libawmjpeg.so
INFO : cedarc <CedarPluginVDInit:84>: register mjpeg decoder success!
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libawmjpegplus.so
INFO : cedarc <CedarPluginVDInit:89>: register mjpegplus decoder success!
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libawmpeg2.so
INFO : cedarc <CedarPluginVDInit:86>: register mpeg2 decoder success!
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libawmpeg4base.so
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libawmpeg4dx.so
INFO : cedarc <CedarPluginVDInit:92>: register mpeg4dx decoder success!
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libawmpeg4h263.so
INFO : cedarc <CedarPluginVDInit:79>: register mpeg4H263 decoder success!
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libawmpeg4normal.so
INFO : cedarc <CedarPluginVDInit:90>: register mpeg4Normal decoder success!
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libawmpeg4vp6.so
INFO : cedarc <CedarPluginVDInit:76>: register Mpeg4Vp6 decoder success!
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libawrecorder.so
ERROR : cedarc <AddVDPluginSingle:1417>: dlopen '/usr/lib/libawrecorder.so' fail: libcrypto.so.1.0.0: cannot open shared object file: No such file or directory
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libawvp8.so
INFO : cedarc <CedarPluginVDInit:73>: register vp8 decoder success!
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libawvp9Hw.so
INFO : cedarc <CedarPluginVDInit:104>: register Vp9Hw decoder success!
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libawvp9HwAL.so
WARNING: cedarc <AddVDPlugin:1584>: 1117 load so: /usr/lib/libawwmv3.so
INFO : cedarc <CedarPluginVDInit:74>: register vc1 decoder success!
INFO : cedarc <log_set_level:43>: Set log level to 5 from /vendor/etc/cedarc.conf
ERROR : cedarc <DebugCheckConfig:301>: now cedarc log level:5
WARNING: cedarc <InitializeVideoDecoder:602>: warning: the nDeInterlaceHoldingFrameBufferNum is 0
WARNING: cedarc <InitializeVideoDecoder:611>: warning: the nDisplayHoldingFrameBufferNum is 0
Pipeline is PREROLLED ...
Setting pipeline to PLAYING ...
New clock: GstSystemClock

卖菜老汉 · 2022-12-07 14:15:57

请问楼主 ERROR : omx_vdec <AwOmxVdecPortGetFormat:290>: erro: pParamData->nIndex > m_sPortFormatType.nIndex
出现这个的原因是什么 ? 是颜色空间没加吗？

卖菜老汉 · 2022-12-07 14:22:09

@avb
请问 ERROR : omx_vdec <AwOmxVdecPortGetFormat:290>: erro: pParamData->nIndex > m_sPortFormatType.nIndex
问题找到了吗？

edisondeng · 2022-12-07 16:47:50

楼主这个最后一部 YUV 转 RGB 用 CPU，仍然不是硬解。这方案效果还是欠佳。请问有人做好最后一步YUV转RGB也走硬解的吗？请问要怎么设置呢？多谢了

卖菜老汉 · 2022-12-09 15:40:46

楼主
解码出来的数据都是很多都是0，显示都是绿色。
日志如下，大神帮看看
WARNING: cedarc <InitializeVideoDecoder:602>: warning: the nDeInterlaceHoldingFrameBufferNum is 0
WARNING: cedarc <InitializeVideoDecoder:611>: warning: the nDisplayHoldingFrameBufferNum is 0
INFO : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
INFO : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
INFO : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
INFO : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
INFO : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
INFO : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail

卖菜老汉 · 2022-12-09 15:48:03

贴出比较完成的日志：

Setting pipeline to PAUSED ...
INFO   : cedarc <VeInitialize:1307>: *** ic_version = 0x1301000010210,
INFO   : cedarc <VeRelease:1476>: not malloc locks

INFO   : cedarc <VeInitialize:1307>: *** ic_version = 0x1301000010210,
Pipeline is PREROLLING ...
:omx_colorformat:2130706434
set  GST_VIDEO_FORMAT_YV12
ERROR  : omx_vdec <AwOmxVdecPortGetFormat:348>: erro: pParamData->nIndex[1] > m_sPortFormatType.nIndex[0]
:omx_colorformat:2130706434
set  GST_VIDEO_FORMAT_YV12
WARNING: cedarc <AddVDPlugin:1574>: 1117 get local path: /usr/lib/
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libaw_aacdec.so 
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libaw_alacdec.so 
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libaw_amrdec.so 
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libaw_apedec.so 
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libaw_atrcdec.so 
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libaw_cookdec.so 
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libaw_dsddec.so 
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libaw_flacdec.so 
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libaw_g729dec.so 
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libaw_mp3dec.so 
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libaw_oggdec.so 
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libaw_opusdec.so 
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libaw_radec.so 
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libaw_siprdec.so 
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libaw_wavdec.so 
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libawavs.so 
INFO   : cedarc <CedarPluginVDInit:76>: register avs decoder success!
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libawavs2.so 
INFO   : cedarc <CedarPluginVDInit:73>: register avs2 decoder success!
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libawh264.so 
INFO   : cedarc <CedarPluginVDInit:79>: register h264 decoder success!
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libawh265.so 
INFO   : cedarc <CedarPluginVDInit:85>: register h265 decoder success!
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libawmjpeg.so 
INFO   : cedarc <CedarPluginVDInit:84>: register mjpeg decoder success!
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libawmjpegplus.so 
INFO   : cedarc <CedarPluginVDInit:89>: register mjpegplus decoder success!
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libawmpeg2.so 
INFO   : cedarc <CedarPluginVDInit:86>: register mpeg2 decoder success!
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libawmpeg4base.so 
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libawmpeg4dx.so 
INFO   : cedarc <CedarPluginVDInit:92>: register mpeg4dx decoder success!
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libawmpeg4h263.so 
INFO   : cedarc <CedarPluginVDInit:79>: register mpeg4H263 decoder success!
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libawmpeg4normal.so 
INFO   : cedarc <CedarPluginVDInit:90>: register mpeg4Normal decoder success!
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libawmpeg4vp6.so 
INFO   : cedarc <CedarPluginVDInit:76>: register Mpeg4Vp6 decoder success!
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libawrecorder.so 
WARNING: cedarc <AddVDPluginSingle:1424>: Invalid plugin, CedarPluginVDInit not found.
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libawvp8.so 
INFO   : cedarc <CedarPluginVDInit:73>: register vp8 decoder success!
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libawvp9Hw.so 
INFO   : cedarc <CedarPluginVDInit:104>: register Vp9Hw decoder success!
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libawvp9HwAL.so 
WARNING: cedarc <AddVDPlugin:1584>:  1117 load so: /usr/lib/libawwmv3.so 
INFO   : cedarc <CedarPluginVDInit:74>: register vc1 decoder success!
INFO   : cedarc <log_set_level:43>: Set log level to 0 from /vendor/etc/cedarc.conf
ERROR  : cedarc <DebugCheckConfig:301>: now cedarc log level:0
INFO   : cedarc <CreateVideoDecoder:332>: CreateVideoDecoder p:0xb3b0d218
DEBUG  : ionAlloc <__GetIonMemOpsS:856>: *** get __GetIonMemOpsS ***
DEBUG  : cedarc <LogVersionInfo:40>: 
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cedar Codec <<<<<<<<<<<<<<<<<<<<<<<<<<<<
tag   : CedarC-v1.3.0
branch: master
commit: d46e6ce979dd9d6cd232ec4df7ccca118349cd6b
date  : Fri Nov 13 10:19:03 2020 +0800
author: houxiaoni
patch : 
----------------------------------------------------------------------

DEBUG  : cedarc <InitializeVideoDecoder:439>: *** pVconfig->nVeFreq = 0
DEBUG  : cedarc <InitializeVideoDecoder:501>: user not set veops, we get internal!
VERBOSE: cedarc <VeInitialize:1253>: ve init

VERBOSE: cedarc <VeInitialize:1263>: *****************gVeEnvironmentInfo.nVeRefCount = 1
VERBOSE: cedarc <getIcVersion:1053>: the get dec_ip_version:00013010

VERBOSE: cedarc <getIcVersion:1071>: the get enc_ip_version:00010210

VERBOSE: cedarc <getIcVersion:1090>: the get enc_dec_ip_version:1301000010210, gVeEnvironmentInfo.address_macc:b6442000

VERBOSE: cedarc <getSocIdString:1132>: soc id string:00000000
VERBOSE: cedarc <getSocInfo:1169>: policy index:40 size:42 soc id:32
INFO   : cedarc <VeInitialize:1307>: *** ic_version = 0x1301000010210,
DEBUG  : cedarc <VeInitialize:1347>: *** nPhyOffset = 0x0
DEBUG  : cedarc <VeSetSpeed:1809>: *** set ve freq to 576 Mhz ***
VERBOSE: cedarc <VeInitialize:1415>: ve init ok

DEBUG  : ionAlloc <ion_alloc_open2:164>: ion context already create, ref_count:2

VERBOSE: cedarc <InitializeVideoDecoder:544>: Video Stream Information:
VERBOSE: cedarc <InitializeVideoDecoder:546>:      codec          = H264
VERBOSE: cedarc <InitializeVideoDecoder:547>:      width          = 512 pixels
VERBOSE: cedarc <InitializeVideoDecoder:548>:      height         = 384 pixels
VERBOSE: cedarc <InitializeVideoDecoder:549>:      frame rate     = 0
VERBOSE: cedarc <InitializeVideoDecoder:550>:      frame duration = 0 us
VERBOSE: cedarc <InitializeVideoDecoder:551>:      aspect ratio   = 0
VERBOSE: cedarc <InitializeVideoDecoder:552>:      is 3D stream   = no
VERBOSE: cedarc <InitializeVideoDecoder:553>:      csd data len   = 0
VERBOSE: cedarc <InitializeVideoDecoder:554>:      bIsFrameCtsTestFlag  = 0
WARNING: cedarc <InitializeVideoDecoder:602>: warning: the nDeInterlaceHoldingFrameBufferNum is 0
WARNING: cedarc <InitializeVideoDecoder:611>: warning: the nDisplayHoldingFrameBufferNum is 0
DEBUG  : cedarc <DecideStreamBufferSize:2147>: nBufferSize=2097152, p->vconfig.nVbvBufferSize=0

DEBUG  : cedarc <VideoEngineCreate:333>: *** pEngine->nIcVeVersion = 1301000010210, decIpVersion = 13010
VERBOSE: cedarc <checkQualification:226>: check, chipId=32, nFrameRate=0, nWidth=512, nHeight=384
VERBOSE: cedarc <CreateSpecificDecoder:1133>: Create decoder '115:h264'
DEBUG  : cedarc <VideoEngineCreate:397>: **************eCtlAfcbMode = 0
VERBOSE: cedarc <SetAfbcParam:160>: *************SetAfbcParam  pEngine->ndecIpVersion=13010

DEBUG  : cedarc <H264DecoderInit:240>:  get the nIcversion = 1301000010210, nDecIpVersion = 13010
DEBUG  : cedarc <GetSbmInterface:1755>: *********GetSbmInterface, nType=4

DEBUG  : cedarc <GetSbmInterfaceFrame:1712>: ******* sbm-type: Frame*******
DEBUG  : cedarc <SbmFrameInit:196>: ************pSbm->sbmInterface.bUseNewVeMemoryProgram=0

VERBOSE: ionAlloc <ion_alloc_palloc_base:373>: ion alloc fd:7 size:2097152 heap:1, falgs:3
VERBOSE: ionAlloc <ion_alloc_palloc_base:413>: alloc succeed, addr_phy: 0x100000, addr_vir: 0xb2bb4000, size: 2097152
DEBUG  : cedarc <CdcMessageQueueCreate:51>: nMessageSize = 20
DEBUG  : cedarc <InitializeVideoDecoder:739>: 0

DEBUG  : cedarc <InitializeVideoDecoder:740>: pts=0

DEBUG  : cedarc <BSSinkWriteBS:62>: save bitstream size:0
VERBOSE: omx_vdec <onMessageReceived:749>: onMessageReceived, cmd:AW_OMX_MSG_EMPTY_BUF
VERBOSE: omx_vdec <doEmptyThisBuffer:51>: nTimeStamp[167000], nAllocLen[6291456], nFilledLen[26],nOffset[0], nFlags[0x10], nOutputPortIndex[-2], nInputPortIndex[0],mPort->m_sBufList.nSizeOfList:2
VERBOSE: omx_sem <OmxTryPostSem:123>: Be careful, sem:submitDataSem, sema frame_output[1]!=0
VERBOSE: omx_vdec <onMessageReceived:749>: onMessageReceived, cmd:AW_OMX_MSG_FILL_BUF
VERBOSE: omx_sem <OmxTryPostSem:123>: Be careful, sem:keepDecodeSem, sema frame_output[1]!=0
VERBOSE: omx_sem <OmxTryPostSem:123>: Be careful, sem:keepSubmitSem, sema frame_output[1]!=0
VERBOSE: omx_sem <OmxTryPostSem:123>: Be careful, sem:keepDrainSem, sema frame_output[1]!=0
VERBOSE: omx_vdec <onMessageReceived:749>: onMessageReceived, cmd:AW_OMX_MSG_FILL_BUF
VERBOSE: omx_sem <OmxTryPostSem:123>: Be careful, sem:keepDecodeSem, sema frame_output[1]!=0
VERBOSE: omx_sem <OmxTryPostSem:123>: Be careful, sem:keepSubmitSem, sema frame_output[1]!=0
VERBOSE: omx_sem <OmxTryPostSem:123>: Be careful, sem:keepDrainSem, sema frame_output[1]!=0
VERBOSE: omx_vdec <onMessageReceived:749>: onMessageReceived, cmd:AW_OMX_MSG_FILL_BUF
VERBOSE: omx_sem <OmxTryPostSem:123>: Be careful, sem:keepDecodeSem, sema frame_output[1]!=0
VERBOSE: omx_sem <OmxTryPostSem:123>: Be careful, sem:keepSubmitSem, sema frame_output[1]!=0
VERBOSE: omx_sem <OmxTryPostSem:123>: Be careful, sem:keepDrainSem, sema frame_output[1]!=0
VERBOSE: omx_vdec <onMessageReceived:749>: onMessageReceived, cmd:AW_OMX_MSG_FILL_BUF
VERBOSE: omx_sem <OmxTryPostSem:123>: Be careful, sem:keepDecodeSem, sema frame_output[1]!=0
VERBOSE: omx_sem <OmxTryPostSem:123>: Be careful, sem:keepSubmitSem, sema frame_output[1]!=0
VERBOSE: omx_sem <OmxTryPostSem:123>: Be careful, sem:keepDrainSem, sema frame_output[1]!=0
VERBOSE: omx_vdec <onMessageReceived:749>: onMessageReceived, cmd:AW_OMX_MSG_START
DEBUG  : omx_vdec <onMessageReceived:805>: ********start***********
DEBUG  : omx_thread <createThread:123>: +++++ self->mThread: 2990220400
DEBUG  : omx_thread <OmxThread_Run:151>: thread submit start to run!
DEBUG  : omx_thread <createThread:123>: +++++ self->mThread: 2981827696
DEBUG  : omx_thread <OmxThread_Run:151>: thread decode start to run!
DEBUG  : omx_thread <createThread:123>: +++++ self->mThread: 2973434992
DEBUG  : omx_thread <OmxThread_Run:151>: thread drain start to run!
VERBOSE: omx_sem <OmxTryPostSem:123>: Be careful, sem:keepDecodeSem, sema frame_output[1]!=0
VERBOSE: omx_sem <OmxTryPostSem:123>: Be careful, sem:keepSubmitSem, sema frame_output[1]!=0
VERBOSE: omx_sem <OmxTryPostSem:123>: Be careful, sem:keepDrainSem, sema frame_output[1]!=0
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_vdec_aw <liGetVideoFbmBufInfo:309>: pFbmBufInfo = NULL, m_decoder(0xb3b0d218)
INFO   : cedarc <ValidPictureNum:1801>: Fbm module of video stream 0 not create yet, ValidPictureNum() fail.
VERBOSE: omx_sem <OmxTryPostSem:123>: Be careful, sem:keepDecodeSem, sema frame_output[1]!=0
VERBOSE: omx_sem <OmxTryPostSem:123>: Be careful, sem:keepSubmitSem, sema frame_output[1]!=0
VERBOSE: omx_sem <OmxTryPostSem:123>: Be careful, sem:keepDrainSem, sema frame_output[1]!=0
VERBOSE: omx_vdec <submitThreadEntry:993>: gqy****difffNum :0
VERBOSE: omx_vdec_aw <__liSubmit:1174>: OmxCopyInputDataToDecoder()
INFO   : cedarc <RequestVideoStreamBuffer:1243>: RequestVideoStreamBuffer, pDecoder=0xb3b0d218, nRequireSize=715, nStreamBufIndex=0
VERBOSE: cedarc <requestStream:1134>: nUnReadFrameNum == 0.
INFO   : cedarc <SubmitVideoStreamData:1403>: Submit, pDecoder=0xb3b0d218, pDataInfo=0xb23b1d68, Index=0, len = 715, pts = 33000
VERBOSE: cedarc <VeFlushCache:1993>: the_flush, start:0xb2bb4000, end:ffffffffb2bb42cb, size:2cb(715)

DEBUG  : cedarc <DebugSaveBitStream:1353>: lenth=715

DEBUG  : cedarc <DebugSaveBitStream:1354>: pts=33000

VERBOSE: cedarc <DebugSaveBitStream:1360>: 0xb2bb4000, 0xb2bb4000, 0xb2db3fff, 2097152
DEBUG  : cedarc <BSSinkWriteBS:62>: save bitstream size:715
VERBOSE: omx_vdec <doSubmit:954>: gqy*****input num:1
VERBOSE: omx_vdec <submitThreadEntry:993>: gqy****difffNum :1
VERBOSE: omx_vdec_aw <__liSubmit:1174>: OmxCopyInputDataToDecoder()
INFO   : cedarc <RequestVideoStreamBuffer:1243>: RequestVideoStreamBuffer, pDecoder=0xb3b0d218, nRequireSize=26, nStreamBufIndex=0
VERBOSE: omx_vdec <__AwOmxVdecEmptyThisBuffer:1788>: ***emptyThisBuffer: pts = 67000 , videoFormat = 7, pBufferHdr = 0x20fd330, len= 23
INFO   : cedarc <SubmitVideoStreamData:1403>: Submit, pDecoder=0xb3b0d218, pDataInfo=0xb23b1d68, Index=0, len = 26, pts = 167000
VERBOSE: omx_vdec <onMessageReceived:749>: onMessageReceived, cmd:AW_OMX_MSG_EMPTY_BUF
VERBOSE: omx_vdec <doEmptyThisBuffer:51>: nTimeStamp[67000], nAllocLen[6291456], nFilledLen[23],nOffset[0], nFlags[0x10], nOutputPortIndex[-2], nInputPortIndex[0],mPort->m_sBufList.nSizeOfList:1

swunzg · 2023-03-01 00:02:48

@f1c100_
哥，最终你在f1c100s上面，硬解h264视频，跑起来没有，请问你用的gcc编译器是什么版本

wj8331585 · 2023-05-10 17:27:02

我也出现了这个错误。

Wpointer-arith -Wundef -Wmissing-prototypes -Wdeclaration-after-statement -Wold-style-definition -Waggregate-return -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1 -fPIC -pthread -DHAVE_CONFIG_H -MD -MQ omx/libgstomx.so.p/gstomxvideo.c.o -MF omx/libgstomx.so.p/gstomxvideo.c.o.d -o omx/libgstomx.so.p/gstomxvideo.c.o -c ../omx/gstomxvideo.c
../omx/gstomxvideo.c: 在函数‘gst_omx_video_get_format_from_omx’中:
../omx/gstomxvideo.c:85:10: 错误： ‘OMX_COLOR_FormatYVU420Planar’未声明(在此函数内第一次使用)
case OMX_COLOR_FormatYVU420Planar:
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
../omx/gstomxvideo.c:85:10: 附注：每个未声明的标识符在其出现的函数内只报告一次
[9/27] Compiling C object omx/libgstomx.so.p/gstomx.c.o
ninja: build stopped: subcommand failed.
make[1]: *** [package/pkg-generic.mk:293：/home/bob/v3s/test/Buildroot-YuzukiSBC/buildroot/output/build/gst-omx-1.20.1/.stamp_built] 错误 1
make: *** [Makefile:84：_all] 错误 2

wj8331585 · 2023-05-11 11:56:52

请问楼主，我软件都错误了，我是哪里错误了吗？

# [   34.407766] vcc5v0: disabling

#
#
# gst-launch-1.0 filesrc location=xiaotiaowa.mp4 ! qtdemux ! avdec_h264 ! autovi
deoconvert ! fbdevsink
Setting pipeline to PAUSED ...
Pipeline is PREROLLING ...
WARNING: from element /GstPipeline:pipeline0/GstQTDemux:qtdemux0: Delayed linking failed.
Additional debug info:
../gst/parse/grammar.y(510): gst_parse_no_more_pads (): /GstPipeline:pipeline0/GstQTDemux:qtdemux0:
failed delayed linking some pad of GstQTDemux named qtdemux0 to some pad of avdec_h264 named avdec_h264-0
ERROR: from element /GstPipeline:pipeline0/GstQTDemux:qtdemux0: Internal data stream error.
Additional debug info:
qtdemux.c(6607): gst_qtdemux_loop (): /GstPipeline:pipeline0/GstQTDemux:qtdemux0:
streaming stopped, reason not-linked (-1)
ERROR: pipeline doesn't want to preroll.
Setting pipeline to NULL ...
Freeing pipeline ...
# [   63.767872] crng init done

#
#

merlin · 2023-05-13 20:09:20

@wj8331585 @Zhou @coldj
我也碰到一样的问题，请问有找到原因吗？

hle999 · 2023-10-24 14:50:20

@f1c100_
最后有跑成功了吗

Iric · 2024-01-04 20:52:47

@wj8331585
同款错误，找到问题了吗？

Aliasghar_n · 2024-01-10 13:57:59

@卖菜老汉
Hi if anyone solved the problem please share the answer for hard decoding

wl989898 · 2024-01-23 11:04:05

终于弄明白硬解是怎么回事了

genyhwang · 2024-07-06 16:32:47

Setting pipeline to PAUSED ...
ERROR: Pipeline doesn't want to pause.
ERROR: from element /GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0: Could not initialize supporting library.
Additional debug info:
../gst-libs/gst/video/gstvideodecoder.c(2517): gst_video_decoder_change_state (): /GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0:
Failed to open decoder
Setting pipeline to NULL ...
Freeing pipeline ...

一步一步的来，出现这个错误了。看楼上有这个错误，只是看完了还是不知道如何解决。明明注册好的。

genyhwang · 2024-07-06 22:41:58

一步一步的来，出现这个错误了。看楼上有这个错误，只是看完了还是不知道如何解决。明明注册好的。

找到解决方法了，我的平台是f1c200s，楼主在另外一个帖子说明了解决方法。

https://whycan.com/p_99186.html

zjh · 2024-08-15 20:48:44

楼主还在吗，请问有f1c100s的解码镜像吗？

WhyCan Forum(哇酷开发者社区)

楼主 #1 2020-10-06 22:57:31 分享评论

V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

楼主 #2 2020-10-06 23:36:52 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#3 2020-10-06 23:46:07 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

楼主 #4 2020-10-06 23:56:31 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

楼主 #5 2020-10-07 00:00:13 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#6 2020-10-07 01:17:22 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#7 2020-10-07 08:07:03 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

楼主 #8 2020-10-07 09:35:11 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#9 2020-10-07 09:42:58 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

楼主 #10 2020-10-07 14:11:33 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#11 2020-10-07 15:23:22 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#12 2020-10-07 21:35:36 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#13 2020-10-09 23:08:38 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

楼主 #14 2020-10-10 10:18:20 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#15 2020-10-12 10:00:56 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

楼主 #16 2020-10-12 22:36:11 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#17 2020-10-14 20:08:34 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#18 2020-10-15 16:38:29 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

楼主 #19 2020-10-15 23:12:09 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

楼主 #20 2020-10-15 23:14:34 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#21 2020-10-16 02:07:57 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#22 2020-10-16 06:28:12 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#23 2020-10-16 20:05:47 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#24 2020-10-16 21:36:50 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#25 2020-10-28 11:50:30 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#26 2020-10-28 17:24:59 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

楼主 #27 2020-10-29 00:30:41 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

楼主 #28 2020-10-29 00:36:20 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#29 2020-10-29 09:57:08 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#30 2020-11-04 23:22:33 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#31 2020-11-04 23:25:58 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#32 2020-11-05 00:34:38 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

楼主 #33 2020-11-05 01:00:25 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#34 2020-11-08 23:59:29 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#35 2020-11-23 02:45:45 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#36 2020-11-26 19:52:55 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

楼主 #37 2020-11-26 22:23:21 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#38 2020-11-27 15:49:34 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#39 2020-12-09 10:36:43 分享评论

Re: V3s使用gstreamer的插件openmax调用cedar硬解码，荔枝派zero测试通过

#40 2020-12-09 12:02:11 分享评论