白嫖: https://github.com/aodzip/sun6i-mipi-csi
MIPI-CSI2 驱动已经测试OV5640摄像头2Lane模式 1080P@15FPS 720P@30FPS
DVP没测试,因为主线本身就支持DVP,希望没给它改坏吧
以下由 @哇酷小二 2020-05-04 添加:
-------------------------------------
不方便打开github的朋友可以此处下载: sun6i-mipi-csi_20200504.7z
离线
大佬真乃世外高人也!
离线
MIPI摄像头可以用的话, DVP坏了就坏了, 感谢楼主分享啊!
离线
楼主发的东西都超有价值!
离线
牛叉牛叉,看起来楼主好像是从全志 linux 4.9抠出来的代码,值得学习!
离线
大佬厉害
离线
牛叉牛叉,看起来楼主好像是从全志 linux 4.9抠出来的代码,值得学习!
难度很大,老外搞了1-2年了,都没搞定!国人厉害!
离线
难度很大,老外搞了1-2年了,都没搞定!国人厉害!
DVP看git log记录也是南京一个同行搞定的,太佩服牛人了。
离线
厉害了,mipi我一直是裸机下跑
离线
楼主老厉害了,mipi都搞定了,还乐于分享,就更厉害了,等有空了翻出板子来试一把
离线
支持一下大佬!!!
主线内核顶起!!!
离线
支持大佬
离线
白嫖: https://github.com/aodzip/sun6i-mipi-csi
MIPI-CSI2 驱动已经测试OV5640摄像头2Lane模式 1080P@15FPS 720P@30FPS
DVP没测试,因为主线本身就支持DVP,希望没给它改坏吧以下由 @哇酷小二 2020-05-04 添加:
-------------------------------------不方便打开github的朋友可以此处下载: sun6i-mipi-csi_20200504.7z
大佬,我移植后,运行fswebcam出现以下情况,请是什么问题?我用的摄像头是ov5647
# fswebcam -S 5 -d /dev/video0 -p YUV420P -r 320x240 test.jpg
--- Opening /dev/video0...
Trying source module v4l2...
/dev/video0 opened.
No input was specified, using the first.
Error starting stream.
VIDIOC_STREAMON: Invalid argument
Unable to use mmap. Using read instead.
Unable to use read.
离线
大佬,我移植后,运行fswebcam出现以下情况,请是什么问题?我用的摄像头是ov5647
# fswebcam -S 5 -d /dev/video0 -p YUV420P -r 320x240 test.jpg
--- Opening /dev/video0...
Trying source module v4l2...
/dev/video0 opened.
No input was specified, using the first.
Error starting stream.
VIDIOC_STREAMON: Invalid argument
Unable to use mmap. Using read instead.
Unable to use read.
请提供更详细的信息:Linux版本,media-ctl所使用的参数,dmesg日志
而且github上的版本比坑网缓存的驱动改动已经很大了,你是从github同步的代码吗?
最近编辑记录 aodzip (2020-05-25 16:04:20)
离线
请提供更详细的信息:Linux版本,media-ctl所使用的参数,dmesg日志
而且github上的版本比坑网缓存的驱动改动已经很大了,你是从github同步的代码吗?
我是从github下的,我文件系统没安装media-ctl,系统是linux 5.2
离线
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.2.0-licheepi-zero+ (paulwu@paulwu-virtual-machine) (gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04)) #57 SMP Mon May 25 13:44:58 CST 2020
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Lichee Pi Zero with Dock
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 15784
[ 0.000000] Normal zone: 124 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 15784 pages, LIFO batch:3
[ 0.000000] percpu: Embedded 16 pages/cpu s34508 r8192 d22836 u65536
[ 0.000000] pcpu-alloc: s34508 r8192 d22836 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 15660
[ 0.000000] Kernel command line: console=tty0 console=ttyS0,115200 panic=5 rootwait root=/dev/mmcblk0p2 earlyprintk rw vt.global_cursor_default=0
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 50572K/63136K available (7168K kernel code, 303K rwdata, 1968K rodata, 1024K init, 268K bss, 12564K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x2fc/0x488 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000019] Switching to timer-based delay loop, resolution 41ns
[ 0.000213] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000465] Console: colour dummy device 80x30
[ 0.000764] printk: console [tty0] enabled
[ 0.000822] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.000853] pid_max: default: 32768 minimum: 301
[ 0.001024] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.001056] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.001897] CPU: Testing write buffer coherency: ok
[ 0.002472] /cpus/cpu@0 missing clock-frequency property
[ 0.002517] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.003353] Setting up static identity map for 0x40100000 - 0x40100060
[ 0.003613] rcu: Hierarchical SRCU implementation.
[ 0.004189] smp: Bringing up secondary CPUs ...
[ 0.004229] smp: Brought up 1 node, 1 CPU
[ 0.004246] SMP: Total of 1 processors activated (48.00 BogoMIPS).
[ 0.004261] CPU: All CPU(s) started in SVC mode.
[ 0.005357] devtmpfs: initialized
[ 0.009161] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.009525] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.009575] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[ 0.009844] pinctrl core: initialized pinctrl subsystem
[ 0.011013] NET: Registered protocol family 16
[ 0.011614] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.012924] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.012973] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.039450] SCSI subsystem initialized
[ 0.039780] usbcore: registered new interface driver usbfs
[ 0.039867] usbcore: registered new interface driver hub
[ 0.039992] usbcore: registered new device driver usb
[ 0.040421] mc: Linux media interface: v0.10
[ 0.040485] videodev: Linux video capture interface: v2.00
[ 0.040836] Advanced Linux Sound Architecture Driver Initialized.
[ 0.042375] clocksource: Switched to clocksource arch_sys_counter
[ 0.054758] NET: Registered protocol family 2
[ 0.055616] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.055685] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.055725] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.055756] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.055921] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.055988] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.056335] NET: Registered protocol family 1
[ 0.057302] RPC: Registered named UNIX socket transport module.
[ 0.057349] RPC: Registered udp transport module.
[ 0.057362] RPC: Registered tcp transport module.
[ 0.057375] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.059997] Initialise system trusted keyrings
[ 0.060422] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[ 0.068745] NFS: Registering the id_resolver key type
[ 0.068833] Key type id_resolver registered
[ 0.068850] Key type id_legacy registered
[ 0.068877] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.104345] Key type asymmetric registered
[ 0.104391] Asymmetric key parser 'x509' registered
[ 0.104502] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.104528] io scheduler mq-deadline registered
[ 0.104543] io scheduler kyber registered
[ 0.109950] sun8i-v3s-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 0.110479] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pb not found, using dummy regulator
[ 0.111378] pwm-backlight backlight: backlight supply power not found, using dummy regulator
[ 0.179835] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.183305] printk: console [ttyS0] disabled
[ 0.203639] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 36, base_baud = 1500000) is a U6_16550A
[ 0.765386] printk: console [ttyS0] enabled
[ 0.793147] 1c28800.serial: ttyS1 at MMIO 0x1c28800 (irq = 37, base_baud = 1500000) is a U6_16550A
[ 0.804317] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pe not found, using dummy regulator
[ 0.840350] panel-simple panel: panel supply power not found, using dummy regulator
[ 0.849922] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pc not found, using dummy regulator
[ 0.862282] libphy: Fixed MDIO Bus: probed
[ 0.867252] PPP generic driver version 2.4.2
[ 0.871890] PPP BSD Compression module registered
[ 0.876684] PPP Deflate Compression module registered
[ 0.881759] PPP MPPE Compression module registered
[ 0.886578] NET: Registered protocol family 24
[ 0.891182] usbcore: registered new interface driver asix
[ 0.896698] usbcore: registered new interface driver ax88179_178a
[ 0.902872] usbcore: registered new interface driver cdc_ether
[ 0.908745] usbcore: registered new interface driver net1080
[ 0.914468] usbcore: registered new interface driver cdc_subset
[ 0.920419] usbcore: registered new interface driver zaurus
[ 0.926062] usbcore: registered new interface driver simcom_wwan
[ 0.932138] usbcore: registered new interface driver sierra_net
[ 0.938149] usbcore: registered new interface driver cdc_ncm
[ 0.943835] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.950356] ehci-platform: EHCI generic platform driver
[ 0.955939] ehci-platform 1c1a000.usb: EHCI Host Controller
[ 0.961567] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
[ 0.969580] ehci-platform 1c1a000.usb: irq 27, io mem 0x01c1a000
[ 1.002386] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[ 1.009638] hub 1-0:1.0: USB hub found
[ 1.013641] hub 1-0:1.0: 1 port detected
[ 1.018292] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.024648] ohci-platform: OHCI generic platform driver
[ 1.030229] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[ 1.036986] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
[ 1.044966] ohci-platform 1c1a400.usb: irq 28, io mem 0x01c1a400
[ 1.117475] hub 2-0:1.0: USB hub found
[ 1.121334] hub 2-0:1.0: 1 port detected
[ 1.128933] usbcore: registered new interface driver usb-storage
[ 1.135283] usbcore: registered new interface driver usbserial_generic
[ 1.141861] usbserial: USB Serial support registered for generic
[ 1.147991] usbcore: registered new interface driver option
[ 1.153644] usbserial: USB Serial support registered for GSM modem (1-port)
[ 1.160782] usbcore: registered new interface driver qcserial
[ 1.166640] usbserial: USB Serial support registered for Qualcomm USB modem
[ 1.174253] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator
[ 1.185799] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 1.191586] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 3
[ 1.200953] hub 3-0:1.0: USB hub found
[ 1.204984] hub 3-0:1.0: 1 port detected
[ 1.211145] sun6i-rtc 1c20400.rtc: registered as rtc0
[ 1.216351] sun6i-rtc 1c20400.rtc: RTC enabled
[ 1.221027] i2c /dev entries driver
[ 1.225840] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pe not found, using dummy regulator
[ 1.241427] bm_cw2015_init
[ 1.245032] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 1.253845] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pf not found, using dummy regulator
[ 1.290370] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
[ 1.297736] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pg not found, using dummy regulator
[ 1.332474] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB
[ 1.340682] usbcore: registered new interface driver usbhid
[ 1.346384] usbhid: USB HID core driver
[ 1.354882] sun4i-codec 1c22c00.codec: ASoC: codec-analog@01c23000 not registered
[ 1.362526] sun4i-codec 1c22c00.codec: Failed to register our card
[ 1.370075] Initializing XFRM netlink socket
[ 1.374534] NET: Registered protocol family 17
[ 1.379625] Key type dns_resolver registered
[ 1.384205] Registering SWP/SWPB emulation handler
[ 1.390189] Loading compiled-in X.509 certificates
[ 1.400452] simple-framebuffer 43da8000.framebuffer: framebuffer at 0x43da8000, 0x258000 bytes, mapped to 0x(ptrval)
[ 1.411165] simple-framebuffer 43da8000.framebuffer: format=x8r8g8b8, mode=1024x600x32, linelength=4096
[ 1.431195] Console: switching to colour frame buffer device 128x37
[ 1.447318] simple-framebuffer 43da8000.framebuffer: fb0: simplefb registered!
[ 1.457761] sun4i-drm display-engine: bound 1100000.mixer (ops 0xc084b380)
[ 1.465551] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xc084867c)
[ 1.473486] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.480256] [drm] No driver support for vblank timestamp query.
[ 1.486337] checking generic (43da8000 258000) vs hw (0 ffffffff)
[ 1.486344] fb0: switching to sun4i-drm-fb from simple
[ 1.491753] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.505301] Console: switching to colour dummy device 80x30
[ 1.511235] mmc0: new high speed SDHC card at address 0001
[ 1.518786] mmcblk0: mmc0:0001 N1BN1 7.52 GiB
[ 1.525001] mmcblk0: p1 p2
[ 1.530517] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
[ 1.584642] Console: switching to colour frame buffer device 128x37
[ 1.608202] sun4i-drm display-engine: fb0: sun4i-drmdrmfb frame buffer device
[ 1.616836] debugfs: Directory '1c22c00.codec' with parent 'V3s Audio Codec' already present!
[ 1.625671] sun4i-codec 1c22c00.codec: ASoC: Failed to create component debugfs directory: -17
[ 1.636094] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
[ 1.644762] sun6i-rtc 1c20400.rtc: setting system clock to 1970-01-01T01:14:47 UTC (4487)
[ 1.653452] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 1.665301] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 1.676133] vcc3v0: disabling
[ 1.683126] vcc5v0: disabling
[ 1.689943] ALSA device list:
[ 1.696706] #0: V3s Audio Codec
[ 1.704505] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 1.717099] cfg80211: failed to load regulatory.db
[ 1.758347] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.770763] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 1.785121] devtmpfs: mounted
[ 1.793540] Freeing unused kernel memory: 1024K
[ 1.802285] Run /sbin/init as init process
[ 1.951507] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 2.188946] random: dd: uninitialized urandom read (512 bytes read)
[ 3.769924] random: crng init done
离线
我是从github下的,我文件系统没安装media-ctl,系统是linux 5.2
请先严格按照github上所指示的环境和初始化方法配置。
离线
请先严格按照github上所指示的环境和初始化方法配置。
buildroot 2019把media-ctl去掉了,我该怎么弄,我是v3s
离线
buildroot 2019把media-ctl去掉了,我该怎么弄,我是v3s
这个驱动在编写的时候,是基于
Buildroot环境buildroot 2020.02.1
Linux Kernel版本5.4.35
你先准备一个相同的环境,内核我认为都是5.4版本的就可以接受
最近编辑记录 aodzip (2020-05-25 16:18:31)
离线
这个驱动在编写的时候,是基于
Buildroot环境buildroot 2020.02.1
Linux Kernel版本5.4.35你先准备一个相同的环境,内核我认为都是5.4版本的就可以接受
环境弄好了,运行media-ctl报
# media-ctl --set-v4l2 '5:0[fmt:UYVY8_2X8/1920x1080@1/15]'
Unable to setup formats: Inappropriate ioctl for device (25)
离线
环境弄好了,运行media-ctl报
# media-ctl --set-v4l2 '5:0[fmt:UYVY8_2X8/1920x1080@1/15]'
Unable to setup formats: Inappropriate ioctl for device (25)
可能是因为摄像头不支持FPS设置,尝试这个指令
media-ctl --set-v4l2 '5:0[fmt:UYVY8_2X8/1920x1080]'
离线
可能是因为摄像头不支持FPS设置,尝试这个指令
media-ctl --set-v4l2 '5:0[fmt:UYVY8_2X8/1920x1080]'
好的, 我明天试试,谢谢指点
离线
我试了那命令,还是不行,估计是不支持了。我用media-ctl -p打印如下
Device topology
- entity 1: sun6i-csi (1 pad, 1 link)
type Node subtype V4L flags 0
device node name /dev/video0
pad0: Sink
<- "ov5647 1-0036":0 [ENABLED,IMMUTABLE]
- entity 5: ov5647 1-0036 (1 pad, 1 link)
type V4L2 subdev subtype Sensor flags 0
device node name /dev/v4l-subdev0
pad0: Source
-> "sun6i-csi":0 [ENABLED,IMMUTABLE]
离线
可能是因为摄像头不支持FPS设置,尝试这个指令
media-ctl --set-v4l2 '5:0[fmt:UYVY8_2X8/1920x1080]'
大佬,能帮忙看看吗?
离线
你方便远程么?
media-ctl --set-v4l2 '5:0[fmt:UYVY8_2X8/1920x1080]'
可以的,能加一吓吗?
离线
大佬,能帮忙看看吗?
看了下OV5647在主线的驱动,输出的格式好像只支持MEDIA_BUS_FMT_SBGGR8_1X8
而我5640的DEMO是MEDIA_BUS_FMT_UYVY8_2X8
你可能要自己改很多东西
最近编辑记录 aodzip (2020-05-26 11:43:25)
离线
可以的,能加一吓吗?
我加你
最近编辑记录 aodzip (2020-05-26 11:43:57)
离线
看了下OV5647在主线的驱动,输出的格式好像只支持MEDIA_BUS_FMT_SBGGR8_1X8
而我5640的DEMO是MEDIA_BUS_FMT_UYVY8_2X8
你可能要自己改很多东西
好的,那我换个摄像头吧,谢谢大佬指点了
离线
我加你
大佬我QQ是110460775
离线
白嫖: https://github.com/aodzip/sun6i-mipi-csi
MIPI-CSI2 驱动已经测试OV5640摄像头2Lane模式 1080P@15FPS 720P@30FPS
DVP没测试,因为主线本身就支持DVP,希望没给它改坏吧
楼主牛,好像硬件编码也搞定了?
离线
好贴,留名,以后再研究,还卡在内核编译,
离线
这个驱动在编写的时候,是基于
Buildroot环境buildroot 2020.02.1
Linux Kernel版本5.4.35你先准备一个相同的环境,内核我认为都是5.4版本的就可以接受
大佬,可以上传一份编译好的buildroot源码吗,我的buildroot也是2020.02.1的,但是不支持media-ctl,一勾选上就编译报错
离线
drivers/staging/media/sunxi/sun6i-csi/sun6i_video.o: In function `sun6i_video_frame_done':
sun6i_video.c:(.text+0xb44): multiple definition of `sun6i_video_frame_done'
drivers/media/platform/sunxi/sun6i-csi/sun6i_video.o:sun6i_video.c:(.text+0xb44): first defined here
drivers/staging/media/sunxi/sun6i-csi/sun6i_video.o: In function `sun6i_video_init':
sun6i_video.c:(.text+0xc10): multiple definition of `sun6i_video_init'
drivers/media/platform/sunxi/sun6i-csi/sun6i_video.o:sun6i_video.c:(.text+0xc10): first defined here
drivers/staging/media/sunxi/sun6i-csi/sun6i_video.o: In function `sun6i_video_cleanup':
sun6i_video.c:(.text+0xe20): multiple definition of `sun6i_video_cleanup'
drivers/media/platform/sunxi/sun6i-csi/sun6i_video.o:sun6i_video.c:(.text+0xe20): first defined here
drivers/staging/media/sunxi/sun6i-csi/sun6i_csi.o: In function `sun6i_csi_is_format_supported':
sun6i_csi.c:(.text+0x5fc): multiple definition of `sun6i_csi_is_format_supported'
drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.o:sun6i_csi.c:(.text+0x5cc): first defined here
drivers/staging/media/sunxi/sun6i-csi/sun6i_csi.o: In function `sun6i_csi_set_power':
sun6i_csi.c:(.text+0xa54): multiple definition of `sun6i_csi_set_power'
drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.o:sun6i_csi.c:(.text+0x9f0): first defined here
drivers/staging/media/sunxi/sun6i-csi/sun6i_csi.o: In function `sun6i_csi_update_config':
sun6i_csi.c:(.text+0xc54): multiple definition of `sun6i_csi_update_config'
drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.o:sun6i_csi.c:(.text+0xbf0): first defined here
drivers/staging/media/sunxi/sun6i-csi/sun6i_csi.o: In function `sun6i_csi_update_buf_addr':
sun6i_csi.c:(.text+0x1954): multiple definition of `sun6i_csi_update_buf_addr'
drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.o:sun6i_csi.c:(.text+0x18c4): first defined here
drivers/staging/media/sunxi/sun6i-csi/sun6i_csi.o: In function `sun6i_csi_set_stream':
sun6i_csi.c:(.text+0x19bc): multiple definition of `sun6i_csi_set_stream'
drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.o:sun6i_csi.c:(.text+0x192c): first defined here
Makefile:1061: recipe for target 'vmlinux' failed
make: *** [vmlinux] Error 1
只有我自己遇到吗?
离线
v3s也能用,不错不错
离线
必须支持大佬,群里就指点过我。。。牛逼
离线
一样问题,来加Q交流一下 19730384
aodzip 说:白嫖: https://github.com/aodzip/sun6i-mipi-csi
MIPI-CSI2 驱动已经测试OV5640摄像头2Lane模式 1080P@15FPS 720P@30FPS
DVP没测试,因为主线本身就支持DVP,希望没给它改坏吧以下由 @哇酷小二 2020-05-04 添加:
-------------------------------------不方便打开github的朋友可以此处下载: sun6i-mipi-csi_20200504.7z
大佬,我移植后,运行fswebcam出现以下情况,请是什么问题?我用的摄像头是ov5647
# fswebcam -S 5 -d /dev/video0 -p YUV420P -r 320x240 test.jpg
--- Opening /dev/video0...
Trying source module v4l2...
/dev/video0 opened.
No input was specified, using the first.
Error starting stream.
VIDIOC_STREAMON: Invalid argument
Unable to use mmap. Using read instead.
Unable to use read.
离线
离线
dts.rar
Hello, do I have right dt for ov5640 camera dvp-csi? How can I grab image/video from this camera? What kernel config should I select?
I have media-ctl v4l2. fswebcam and e.t.c.
I tried
fswebcam -r 1920x1080 img.jpg
--- Opening /dev/video0...
Trying source module v4l2...
/dev/video0 opened.
No input was specified, using the first.
Error starting stream.
VIDIOC_STREAMON: Invalid argument
Unable to use mmap. Using read instead.
Unable to use read.
I tried:
ffmpeg -f v4l2 -framerate 25 -video_size 640x480 -i /dev/video0 output.jpg
What I need to do in order to get some image/video?
How camera is configured from linux to select custom resolution?
I'm using Buildroot 2020.02.01 & linux 5.4.31
最近编辑记录 niyazfattahov (2021-06-27 01:41:58)
离线
有没有csi的pin配置
离线
@aodzip
您好,我在linux5.2内核上移植了您的 sun6i-mipi-csi ,在内核启动的时候报错:
ov7251: probe of 0-0060 failed with error -2
请问这是什么原因啊?
离线
下的官方的5.2内核
放进内核时 编译报错 多次定义
然后发现这里还有一份 drivers/media/platform/sunxi/sun6i-csi/
离线
OV428,也是支持DVP.MIPI~~
离线
厉害了,mipi我一直是裸机下跑
裸机下的mipi 资料能够提供下参考么。谢谢
离线